Restore MSSQL Database, Lost LDF-File
Oct 4, 2005
Hi.
I've following problem:
- Customer played with his logical drives in a CPQ smart array
- He played too much: he lost the drive with the LDF-File
- Now the SQL-Server is in a kind of wired mode; you can
start and stop it, but you cannot connect to (neiter 'sa' nor
any other user available before)
In fact the mode is not wired: what shall he do other when
most important file is missing... :o
- The problem for me now is:
> How can I get the Enterprise Manager or Query Analyzer
up and running again to start a restore?
PS: The restore is to be done from a tape-library running
Veritas Backup Exec + SQL-Agent
PPS: Error-log says (what I already know):
2005-10-04 17:18:02.69 spid11 Device activation error. The physical file name 'H:DEVLOG1DEVLOG1.ldf' may be incorrect.
Thanks in advance for assistance.
Regards,
Carsten Loeffler
View 8 Replies
ADVERTISEMENT
Jun 16, 2007
Hi,
I need an application with asp.net that let me restore database by getting .bak file and database name and database user and user password, my database is SQL Server 2005.
View 1 Replies
View Related
Jun 10, 2015
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies
View Related
Mar 3, 2005
Can anyone help me to recreate the .NDF file if it was lost and not restorable? I have a stored procedure written that will then help me rebuild all indexes on all tables, but I can't seem to figure out how to create the index file again so I can run it. I have tried index files from other databases to no avail. There is no backup to go to.
View 10 Replies
View Related
Mar 28, 2008
here is my error message wich can also be seen live at www.aspdoug.com/menu log in with user: doug pass: macromedia!
--------------------------------------------------------------------------------------------------------------------------------
Server Error in '/menu' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +737554
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +114
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +421
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +133
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) +68
[HttpException (0x80004005): Unable to connect to SQL Server database.]
System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) +124
System.Web.Management.SqlServices.SetupApplicationServices(String server, String user, String password, Boolean trusted, String connectionString, String database, String dbFileName, SqlFeatures features, Boolean install) +86
System.Web.Management.SqlServices.Install(String database, String dbFileName, String connectionString) +25
System.Web.DataAccess.SqlConnectionHelper.CreateMdfFile(String fullFileName, String dataDir, String connectionString) +397
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Below is my web.config file.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------<?xml version="1.0"?><configuration>
<appSettings/>
<connectionStrings>
<add name="aspdougcomConnectionString" connectionString="Data Source=65.36.214.248;Initial Catalog=aspdougcom;Persist Security Info=True;User ID=*&^%$#@;Password=*&^%$#@"providerName="System.Data.SqlClient" /></connectionStrings>
<system.web><!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.-->
<compilation debug="false" strict="false" explicit="true"></compilation>
<pages><namespaces>
<clear /><add namespace="System" />
<add namespace="System.Collections" /><add namespace="System.Collections.Generic" />
<add namespace="System.Collections.Specialized" /><add namespace="System.Configuration" />
<add namespace="System.Text" /><add namespace="System.Text.RegularExpressions" />
<add namespace="System.Web" /><add namespace="System.Web.Caching" />
<add namespace="System.Web.SessionState" /><add namespace="System.Web.Security" />
<add namespace="System.Web.Profile" /><add namespace="System.Web.UI" />
<add namespace="System.Web.UI.WebControls" /><add namespace="System.Web.UI.WebControls.WebParts" />
<add namespace="System.Web.UI.HtmlControls" /></namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user. -->
<authentication mode="Forms" />
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>-->
</system.web>
</configuration>
-------------------------------------------------------------------------------------------------------------------------
MY host told me that they do not support sqlexpress and to change it MySql 2005 or something. im using hostmysite.com builder plan.
View 1 Replies
View Related
Jan 17, 2007
Hello,
Hope anyone in here can help.
I have tried to install the SQL Server 5 Express, but can't seem to get it to work properly.
I got a terrible name set as default for my database, as well as a terrible name for my username.
I can't find a place to change this to something more manageable.
It is further set to windows auth, but trying to set it to both, and trying a username (and password) always gives me a log in error.
I've tried searching all over the net and in here for a simple tutorial, but can't seem to find one that helps me more than it confuses me.
*****
The second part of the problem is that I have a java program which I want to connect to the database and use the tables in it, but I am at loss to how I can find what username (and password) I am supposed to have, what "url" it needs etc.
I have the jdbc driver so that part should work, I can successfully log to other mssql databases (at work/school), but not my own.
Hope you can help, and thanks in advance.
View 3 Replies
View Related
Feb 5, 2007
Hey everyone,
I've run into a fairly big problem. Apparently, the automatic backup has not been working since September, and that backup is of no use to me.
What I'm trying to do is restore the database without using the transaction log file. I don't care about a dirty database or lost data. The data is all I need, and the database structure of course.
I've tried several things.
Right click on the <database> go to tasks->attach-> pick MDF file etc.
Following this guide The only problem is I get a different error message. It doesn't ask a yes no question it just says the file doesn't exist and it can't create the database.
I've tried running it from other SQL management software and removing the LOG file when attaching, and that doesn't work. I tried:
Code:
MS SQL
EXEC sp_detach_db @dbname = <my db name>
EXEC sp_attach_single_file_db @dbname = <my db name>, @physname = <my db mdf file>
and I get the same message pretty much.
I tried this but I can't seem to get the database into emergency mode.
Am at the end of my rope and I really need this up and running ASAP.
Although I'm not sure of the proper syntax for setting a database into emergency mode, I think the last link I provided might do the trick.
I also tried the following:
http://www.spaceprogram.com/knowled...file-on_12.html
But when I get to step 8, the database is not in a suspect mode. When I click on it it says the database is in accessible.
When I right click and click on properties I get:
Quote:
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
Cannot show requested dialog.
------------------------------
ADDITIONAL INFORMATION:
Cannot show requested dialog. (Microsoft.SqlServer.Express.SqlMgmt)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
Database 'BridgeTrak_Central2' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. (Microsoft SQL Server, Error: 945)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.0194&EvtSrc=MSSQLServer&EvtID=945&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I checked the server and there is enough memory and disk space, about 2GB on each drive. Should be plenty for my 32MB database.
It's not my neck on the line but I would like to see my coworker stay here.
If anyone here knows anything about this, that would be great.
MS SQL 2000
Windows Server 2000 SP 4
_Any_ help or suggestions, other than the obvious, make sure backups are working, will be greatly appreciated....
Did I mention greatly appreciated?
I think the issue is that the original database was lost when someone else was trying what I'm trying now. They're very delete happy.
I think they may be SOL... glad it's not me, then again I wouldn't use the delete key without making 100% sure it wouldn't screw things up...I especially wouldn't empty the recycling bin. I probably would have deleted a database already burnt to CD, or burned some to CD....or made sure my backups were working. Messy messy network state, last guy left it in a mess. New network/DBA/ if it's got a network cable attached you're responsible. :S I don't like this new company that much. Too stingy... Dual P2 server?!?!?! Isn't that like, antiquated? No wonder there have been 3 dba/network admins/"if it's got a network cable..." that have left in the past year.
View 1 Replies
View Related
May 18, 2007
i restored a database from a .bak file.
from production to development.
But i dropped the database from development before restoring. Now all the users are gone from this database. Anyone know how to recover them?
the users from development are different from production's
View 14 Replies
View Related
Nov 6, 2007
Ok guys, I do a regular daily ntbackup of my entire server. I thought I had sql backups going daily but I think a admin password change stopped that and well those backups are a LONG time ago. The ntbackup is just 1 lost half day.
Windows crashed and had to be reinstalled, so I have all the files in the database folder and what I've done so far was reinstall windows, sql, and all that stuff so now windows is back up and going. I used sql admin and created the database ncdsm. Then I took the folder from the backup of the database for ncdsm and copied it to the new sql install (after stopping the service) and then turned it back on, and it shows that the tables do not exist, but it shows the list of tables in red.
How can I fix this and get all my databases back to normal? Thanks.
View 8 Replies
View Related
Sep 3, 1999
I have to restore a database from a directory structure backup run by NT SERVER not SQL SERVER. I am not sure of the database size structure or whethter it has a log device. I am desperate for any advice on methods of restoring this in a safe manner.(it is a live production DB)
Thanks in advance.
Barry.
View 1 Replies
View Related
Sep 13, 2007
I lost Product key for "MSSQL Server 2000 Reporting Services Interprise Edition". Help me!
View 1 Replies
View Related
Apr 29, 2005
Hi.. When I go to my MSSQL 2000 database-->
properties-->Databse size is 1500MG and the space
available is 305MB
But I don't understand how space available come from.
As I had put my Database file and Transaction log file
as unrestricted file grow. And put automatically file
grow by 10% for both file and log
Why is the limit come from ?
Besides, I have a database which indicate space
available as 0M in the database properties but it is
still functioning. why?
View 1 Replies
View Related
Aug 9, 2005
Would any body be able to suggest the best way switch a Lotus .nsf file to Ms SQL database or even to an Access?
I have a .nsh file that I am able to see the contents of but not the database structure, and rather then rebuilding the database and manually inserting the content I would like to import all the information from an old .nsf file that appears to have restriction on it.
Any Suggestions
View 1 Replies
View Related
Mar 19, 2003
If a SQL 2000 server instance is destroyed, but the database file (*.mdf) is saved on the disk, can a database within a newly created server instance be built on the saved file?
If I attempt to create a new database and choose the saved mdf file as the data file, then the server refuses to accept this file. Is there a way to create the new database and make it read the standalone mdf file?
Please help if at all possible. Thanks.
View 3 Replies
View Related
Dec 30, 2005
Hi,
Is it possible to restore a database with only a .bak file??
When I try to restore the system comes up with 2 paths where probably the original .mdf and .ldf files existed, but on my system they don't exist. How can I avoid this problem? (it's not possible to get the ldf and mdf files anymore...)
Grtz
Carlos
View 3 Replies
View Related
Mar 3, 2006
Hello guys,
is it possible to restore an SQL server database from the .ldf file only?
The last operation is a script execution that have drop and create all the tables.
have you some idea?
Thanks to all
View 6 Replies
View Related
Feb 28, 2006
Hello, I had backed up a database from SQL 2000, just before I format my computer. Now I have installed SQL 2005 and trying to restore that database to it, it doesn't work and I get the following error when doing that
===================================
Restore failed for Server 'localhostSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
===================================
System.Data.SqlClient.SqlError: The backup set holds a backup of a database other than the existing '2for1' database. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
========================================================
any help is appreciated
Thanks,
View 5 Replies
View Related
Mar 25, 2002
I have to do a database restore from tape from a couple of months ago. When I look at the SQL scheduled task history all databases were sucesfully backed up to a .DAT file. However, when I look at the .DAT file which I have just retrieved from tape - the database which I am looking for isn't listed under the backup information, so I can't choose it to carry out the restore.
Has anyone seen this problem before?
What do I do?
Thanks
Derek
View 2 Replies
View Related
Jun 4, 1999
DOES ANYONE KNOW HOW I CAN RESTORE A SQL7 DATABASE WITH JUST THE DATA FILE?
THERE IS NO GOOD BACKUP OF THE DATABASE AND THE LOG FILE IS MISSING. THE CLIENT THOUGHT THEY WHERE BACKING UP THE DATABASE BACKUP FILE TO TAPE, BUT THEY WHERE NOT. THE BACKUP FILE WAS BEING OVERWRITTEN EVERY NIGHT. THE LAST NIGHTS BACKUP DID NOT GET TO FINISH TO COMPLETION.
PLEASE, ANY INPUT WOULD BE APPRECIATED.
THANKS,
TIM
View 1 Replies
View Related
Mar 19, 2004
I have been trying to use DMO(C++) to backup a database and then restore from that backup to a new db name AND physical data and log files, with no success. I have been able to successfully restore the backup to the same database and change the physical file names using the RelocateFiles property on the Restore object, but not change both.
Any help would be greatly appreciated.
View 3 Replies
View Related
May 4, 2015
Now i must restore a database from a backup file of MS SQL Sever 6.5,but this file is bad. When i restore database from this file, SQL Server tell me that the format of this file is not file format of SQL Server 6.5.So that I must repair this backup file firstly. I don't know database file format of SQL Server 6.5.
View 2 Replies
View Related
Jul 23, 2005
Hello,I need to restore the Master DB in my SQL 2k server (with sp3). Theproblem is that i don't have SQL backups of this file I only havegeneral backup of the entire c: drive i made using NTBackup. So itried all I know and succesfully run the rebuildm utility. Now when Itry to restore it from the general backup (not SQL backup) using"restore database master from gen_backup" i got error: "The file ondevice 'gen_backup' is not a valid Microsoft Tape Format backup set."RESTORE DATABASE is terminating abnormally.Any ideas how I can restore it?
View 2 Replies
View Related
Nov 20, 2007
Hi guys
I have backup my database with "file and filegroup"selected. I have dropped my database by accident. is it possible to restore my data back from "file and filegroup".bak??
Thanks
View 11 Replies
View Related
Jun 25, 2015
One of our database came to Restoring mode. I suddenly stop my SQL service and Copied only MDF files again Started SQL service ,unexpectedly i dropped the Database. Now i cant able to attach the database only with my MDF file.
I tried below Scripts. All scripts shows same error.
EXEC sp_attach_single_file_db @dbname='PhoenixPolice',
@physname=N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf'
GO
CREATE DATABASE PhoenixPolice ON
(NAME = N'PhoenixPolice',
FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf')
FOR ATTACH_REBUILD_LOG
GO
CREATE DATABASE phoenixPolice ON (FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf')
FOR ATTACH
All scripts shows below error
File activation failure. The physical file name "F:Microsoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLDATAPhoenixPolice_1.ldf" may be incorrect.
The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'PhoenixPolice'. CREATE DATABASE is aborted.
View 4 Replies
View Related
May 9, 2008
Hi SQL server experts,
I'm trying to restore from a backup file.
I need to restore the datafile and logfile to different names.
I modified the options page, changed the 'Restored As' file name.
I clicked on the General page and Clicked on the Options page again, the old values came back.
How do I handle this?
Thanks in advance.
Pingx
View 3 Replies
View Related
May 29, 2006
Hi Everybody,I use MS SQL server 2000 enterprise manager on a windows server 2003.I created a new database in enterprise manager, and try to restore the new database from a .bak file. I went to ---->restore database. I checked "from device" and select the right path to the .bak file.Then I click ok, but there is an error pop up." tend to override existing database", so I went to --->option, and checked "force override existing database". then I click ok, but get an error look like this http://ewwa.lo7.net/error.JPGI thought it was a problem with my .bak file. So I try to use another .bak file which I am sure it is 100% good. It prompt the restore is sucessfully. But when I checked the db, there nothing there(No tables).I think there must be something wrong with my enterprise manager's configuration.Do you know what happen with my enterprise manager? Thank you a lot in advance:)!!
View 2 Replies
View Related
Feb 24, 2002
Our SQL database log file got physically deleted. Now the database is in suspect mode. Is it possible to recover / restore the database just with the data file.
View 3 Replies
View Related
Mar 19, 2001
Hello,
I have a user database which has 1 data file and 1 logfile.
I did a complete backup of the database to a file on the disk drive, using Enterprise manager. Due to some reason, I had to drop the database. The only way I could restore it was by,
1. Create the database with the same name.
2. Restore the complete backup from the file device.
While doing so,
I get the message "Backup set holds the backup of daatabase other than the existing 'userdbname' database. BAckup terminating."
Is it because the database was dropped and recreated.
If I choose the option to overwrite, it restores successfully.
Is this normal and right way to do it? Is there any thing else that I need to take care of, while backup or restore?
Any suggestions welcome.
Thanks,
MMS
View 3 Replies
View Related
May 6, 2008
hi
can you posible one tabel restore in database using full backfile
thanks
View 1 Replies
View Related
Jun 4, 2008
hi
i have restore database use backup file in another machine of same name of database there following error
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'database name'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The backup set holds a backup of a database other than the existing 'dbname' database.
RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3154)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3154&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 1 Replies
View Related
Dec 30, 2007
I am confused regarding why the default behavior of this option is to use file no 1 if the option is not specified? If I take two backups on different days, weeks, months, etc. and write them to the same Backup set, the second and most recent backup by the way gets the higher file number (position) as one would expect. What is incomprehensible to me is why the decision was made to restore the oldest backup from the backup set if you do not specify with file no? Seems like common sense that I would NEVER want to restore the oldest backup by default and would most-likely always want to restore the most recent backup by default!
If anyone has suggestions on how I could suggest that the behavior of this option be changed, I would appreciate it, as this has caused me much pain.
Tim
View 2 Replies
View Related
Aug 12, 2006
Hi everybody,
On executing the RESTORE command of SQL Server to restore from a backup of 78.3 MB, the "Server Application Unavailable" error message comes up.The error message in the Application log is as follows:aspnet_wp.exe (PID: 2184) was recycled because memory consumption exceeded the 152 MB (60 percent of available RAM).
However using Query Analyser of SQL Server I am able to restore the database.
What is the solution to this problem?
View 2 Replies
View Related
Jun 15, 2004
I can run this example from SQL Book Online from sql query analyzer. I can build the TestDB database.
BACKUP DATABASE Northwind
TO DISK = 'c:Northwind.bak'
RESTORE FILELISTONLY
FROM DISK = 'c:Northwind.bak'
RESTORE DATABASE TestDB
FROM DISK = 'c:Northwind.bak'
WITH MOVE 'Northwind' TO 'c: est estdb.mdf',
MOVE 'Northwind_log' TO 'c: est estdb.ldf'
GO
But... When I build stored procedure and call it through VB6. I've got the gray database symbol along with message TestDB (Loading/Suspecting)
Why I cannot run these commands through VB6
View 1 Replies
View Related
