Hi SQL server experts,
I'm trying to restore from a backup file.
I need to restore the datafile and logfile to different names.
I modified the options page, changed the 'Restored As' file name.
I clicked on the General page and Clicked on the Options page again, the old values came back.
How do I handle this?
Thanks in advance.
Pingx
Hi,I am planning to automate a nighty restore of a DB on another servercan someone point me in the right direction with the SQL script tomodify the logical file names to the correct path and not the onescarried over with the DB??i.e the database is to be renamed on the new serverany help much appreciatedMany thanks in advance
View 14 Replies View RelatedI am designing a package to export staging tables into a flat file.The names of the tables will be: TableAStaging_YYYYMM and TableBStaging_YYYYMM. As you can see the names of the tables will be changing each month.
The flat files will have similar naming: C:MyPathFlatFileTableAStaging__YYYYMM and C:MyPathFlatFileTableAStaging__YYYYMM.I want to run the package as an sql job in two steps, one for each table.I need to dynamically pass the table names and file names (together with the path) to the IS package.
I've been asked to create a new SQL server and restore an old server's DBs to the new server.
I'd like to generate a list of the DB names using powershell to distribute to their creators, in case some of these DBs are no longer needed.
If a SQL 2000 server instance is destroyed, but the database file (*.mdf) is saved on the disk, can a database within a newly created server instance be built on the saved file?
If I attempt to create a new database and choose the saved mdf file as the data file, then the server refuses to accept this file. Is there a way to create the new database and make it read the standalone mdf file?
Please help if at all possible. Thanks.
Hi,
Is it possible to restore a database with only a .bak file??
When I try to restore the system comes up with 2 paths where probably the original .mdf and .ldf files existed, but on my system they don't exist. How can I avoid this problem? (it's not possible to get the ldf and mdf files anymore...)
Grtz
Carlos
Hello guys,
is it possible to restore an SQL server database from the .ldf file only?
The last operation is a script execution that have drop and create all the tables.
have you some idea?
Thanks to all
Hello, I had backed up a database from SQL 2000, just before I format my computer. Now I have installed SQL 2005 and trying to restore that database to it, it doesn't work and I get the following error when doing that
===================================
Restore failed for Server 'localhostSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
===================================
System.Data.SqlClient.SqlError: The backup set holds a backup of a database other than the existing '2for1' database. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
========================================================
any help is appreciated
Thanks,
I have to do a database restore from tape from a couple of months ago. When I look at the SQL scheduled task history all databases were sucesfully backed up to a .DAT file. However, when I look at the .DAT file which I have just retrieved from tape - the database which I am looking for isn't listed under the backup information, so I can't choose it to carry out the restore.
Has anyone seen this problem before?
What do I do?
Thanks
Derek
DOES ANYONE KNOW HOW I CAN RESTORE A SQL7 DATABASE WITH JUST THE DATA FILE?
THERE IS NO GOOD BACKUP OF THE DATABASE AND THE LOG FILE IS MISSING. THE CLIENT THOUGHT THEY WHERE BACKING UP THE DATABASE BACKUP FILE TO TAPE, BUT THEY WHERE NOT. THE BACKUP FILE WAS BEING OVERWRITTEN EVERY NIGHT. THE LAST NIGHTS BACKUP DID NOT GET TO FINISH TO COMPLETION.
PLEASE, ANY INPUT WOULD BE APPRECIATED.
THANKS,
TIM
I have been trying to use DMO(C++) to backup a database and then restore from that backup to a new db name AND physical data and log files, with no success. I have been able to successfully restore the backup to the same database and change the physical file names using the RelocateFiles property on the Restore object, but not change both.
Any help would be greatly appreciated.
Now i must restore a database from a backup file of MS SQL Sever 6.5,but this file is bad. When i restore database from this file, SQL Server tell me that the format of this file is not file format of SQL Server 6.5.So that I must repair this backup file firstly. I don't know database file format of SQL Server 6.5.
View 2 Replies View RelatedHello,I need to restore the Master DB in my SQL 2k server (with sp3). Theproblem is that i don't have SQL backups of this file I only havegeneral backup of the entire c: drive i made using NTBackup. So itried all I know and succesfully run the rebuildm utility. Now when Itry to restore it from the general backup (not SQL backup) using"restore database master from gen_backup" i got error: "The file ondevice 'gen_backup' is not a valid Microsoft Tape Format backup set."RESTORE DATABASE is terminating abnormally.Any ideas how I can restore it?
View 2 Replies View RelatedHi guys
I have backup my database with "file and filegroup"selected. I have dropped my database by accident. is it possible to restore my data back from "file and filegroup".bak??
Thanks
One of our database came to Restoring mode. I suddenly stop my SQL service and Copied only MDF files again Started SQL service ,unexpectedly i dropped the Database. Now i cant able to attach the database only with my MDF file.
I tried below Scripts. All scripts shows same error.
EXEC sp_attach_single_file_db @dbname='PhoenixPolice',
@physname=N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf'
GO
CREATE DATABASE PhoenixPolice ON
(NAME = N'PhoenixPolice',
FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf')
FOR ATTACH_REBUILD_LOG
GO
CREATE DATABASE phoenixPolice ON (FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf')
FOR ATTACH
All scripts shows below error
File activation failure. The physical file name "F:Microsoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLDATAPhoenixPolice_1.ldf" may be incorrect.
The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'PhoenixPolice'. CREATE DATABASE is aborted.
Hi Everybody,I use MS SQL server 2000 enterprise manager on a windows server 2003.I created a new database in enterprise manager, and try to restore the new database from a .bak file. I went to ---->restore database. I checked "from device" and select the right path to the .bak file.Then I click ok, but there is an error pop up." tend to override existing database", so I went to --->option, and checked "force override existing database". then I click ok, but get an error look like this http://ewwa.lo7.net/error.JPGI thought it was a problem with my .bak file. So I try to use another .bak file which I am sure it is 100% good. It prompt the restore is sucessfully. But when I checked the db, there nothing there(No tables).I think there must be something wrong with my enterprise manager's configuration.Do you know what happen with my enterprise manager? Thank you a lot in advance:)!!
View 2 Replies View RelatedOur SQL database log file got physically deleted. Now the database is in suspect mode. Is it possible to recover / restore the database just with the data file.
View 3 Replies View RelatedHello,
I have a user database which has 1 data file and 1 logfile.
I did a complete backup of the database to a file on the disk drive, using Enterprise manager. Due to some reason, I had to drop the database. The only way I could restore it was by,
1. Create the database with the same name.
2. Restore the complete backup from the file device.
While doing so,
I get the message "Backup set holds the backup of daatabase other than the existing 'userdbname' database. BAckup terminating."
Is it because the database was dropped and recreated.
If I choose the option to overwrite, it restores successfully.
Is this normal and right way to do it? Is there any thing else that I need to take care of, while backup or restore?
Any suggestions welcome.
Thanks,
MMS
Hi.
I've following problem:
- Customer played with his logical drives in a CPQ smart array
- He played too much: he lost the drive with the LDF-File
- Now the SQL-Server is in a kind of wired mode; you can
start and stop it, but you cannot connect to (neiter 'sa' nor
any other user available before)
In fact the mode is not wired: what shall he do other when
most important file is missing... :o
- The problem for me now is:
> How can I get the Enterprise Manager or Query Analyzer
up and running again to start a restore?
PS: The restore is to be done from a tape-library running
Veritas Backup Exec + SQL-Agent
PPS: Error-log says (what I already know):
2005-10-04 17:18:02.69 spid11 Device activation error. The physical file name 'H:DEVLOG1DEVLOG1.ldf' may be incorrect.
Thanks in advance for assistance.
Regards,
Carsten Loeffler
hi
can you posible one tabel restore in database using full backfile
thanks
hi
i have restore database use backup file in another machine of same name of database there following error
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'database name'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The backup set holds a backup of a database other than the existing 'dbname' database.
RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3154)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3154&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I am confused regarding why the default behavior of this option is to use file no 1 if the option is not specified? If I take two backups on different days, weeks, months, etc. and write them to the same Backup set, the second and most recent backup by the way gets the higher file number (position) as one would expect. What is incomprehensible to me is why the decision was made to restore the oldest backup from the backup set if you do not specify with file no? Seems like common sense that I would NEVER want to restore the oldest backup by default and would most-likely always want to restore the most recent backup by default!
If anyone has suggestions on how I could suggest that the behavior of this option be changed, I would appreciate it, as this has caused me much pain.
Tim
Hi everybody,
On executing the RESTORE command of SQL Server to restore from a backup of 78.3 MB, the "Server Application Unavailable" error message comes up.The error message in the Application log is as follows:aspnet_wp.exe (PID: 2184) was recycled because memory consumption exceeded the 152 MB (60 percent of available RAM).
However using Query Analyser of SQL Server I am able to restore the database.
What is the solution to this problem?
I can run this example from SQL Book Online from sql query analyzer. I can build the TestDB database.
BACKUP DATABASE Northwind
TO DISK = 'c:Northwind.bak'
RESTORE FILELISTONLY
FROM DISK = 'c:Northwind.bak'
RESTORE DATABASE TestDB
FROM DISK = 'c:Northwind.bak'
WITH MOVE 'Northwind' TO 'c: est estdb.mdf',
MOVE 'Northwind_log' TO 'c: est estdb.ldf'
GO
But... When I build stored procedure and call it through VB6. I've got the gray database symbol along with message TestDB (Loading/Suspecting)
Why I cannot run these commands through VB6
I created a dummy database (TomsTest) and then I try to restore my other database "DEV" to it.Normally, you have to use the Move for both the mdf and ldf files to tell it to restore to another database.But the message I am getting is: The file 'D:SQLDataTomsTest.mdf' cannot be overwritten. It is being used by database 'TomsTest'.
USE [master]
RESTORE DATABASE [DEV] FROM DISK = N'D:SQLBackupDEV_backup_2014_05_28.bak' WITH FILE = 1,
MOVE N'Dev' TO N'D:SQLDataTomsTest.mdf',
MOVE N'DEV_log' TO N'D:SQLDataTomsTest_log.ldf', NOUNLOAD, REPLACE, STATS = 5
Of course it is in use, that's always the case. Even if I put it in single use mode, it still doesn't work.I tried it on another machine and had the same problem. Not sure why. If I call it the same name, it works fine but I don't want to overwrite the original database, I just need to get some data from the backup.
Using SQL Server 2000 and moving to a new computer. We did a full backup ofthe existing database to tape, brought up the new computer with a cleaninstall using the same server name and IP address, and did a full restore.Not only were some permissions messed up, but Crystal Reports 10 and someAccess Data Projects refused to run. I finally discovered while running anSP_WHO that the individual database names that we'd created (meaning not'master' and the other standard tables) had several dozen blanks appendedonto the end of them. Looking at dbnames in the SP_WHO made it clear thatthis had happened, and once I knew what I was looking for it was apparent inEnterprise Manager as well when I'd select a database name in the left pane.Interestingly, VB6 applications have no trouble connecting to these tableswithout modification of the connection string. Every single CR10 report sofar has had to have it's tables relinked, and this has broken some othercode that looks at dbnames.1: How could something like this happen?2: How is it best fixed?Thanks!David
View 3 Replies View RelatedI need to move specific files from a server to another server on a monthly basis. There are hundreds of files that are in the source directory and I need to move approximately 40 of those to the destination server. I would like to easily add or delete the file list as needed. I have seen where several variables were created for for each file name (and one for the path) and the ForEach Loop would go through them. With 40 or more I was thinking that I could make a connection to an Excel spreadsheet or text file with a record for each file name and read in and and move to the next record and make that value become the content of a "FileName" variable. Then if I wanted to add another file name I could just add another record to spreadsheet/text file or remove and the package would handle automatically....
View 10 Replies View RelatedI'm exporting reports daily to a file share and I need to rename the reports with a pseudo time stamp.
Example: I have a report named "Disk Usage" and when I export (using a data-driven subscription) I want to rename it "Disk Usage - (Jan07)" - or something to that effect.
Can anybody tell me how to accomplish this.
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
hi
i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
pls some one can help me ???
thanks
chaus
Hello,
How do I restore a sql database that is on a clustered server from a sql database backup file that is on a non_clustered server?
Thanks,
Serey
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
Hi All,
I am using query analyzer to execute my sqls .
I want to take out .mdf and .LDF files and put it in another machine .
But there is no .mdf or .LDF file with prefix as my database name . I think the file name might be something else .
Please help me in finding out the .mdf and .LDF of a particular database .
Thanks ,
Sushi