Restore Database To User Use This Database
May 7, 2008hi
how can restore database when user use this database.?
to posibility any error and how can solution
hi
how can restore database when user use this database.?
to posibility any error and how can solution
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
Hello.
I am trying to perform a backup and restore of a user's default database. the user- "myuser", was created with a default database. I have backed the user database and tried to restore it in different ways and I always get the same error when trying to connect with the user after restore:
"Cannot open user default database.Login failed (error 4064)".
It happens if I don't delete the user before restoring the database.
If I try to delete the user before restore and create it afterwards, when I try to set the default user database to the same database I get the error:
"user, group or role 'myuser' already exist in the database"
And when I try to delete the user from the restored database (in order to recreate it) I cannot, because the user's schema is connected to objects in the database.
Can anyone help?... How do I restore??
Thanx,
Nili.
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
View 2 Replies View RelatedAnybody figure a way around this:
In a development server you take a backup and you want to move the entire database to a production server. The production server does not contain the database, users, or logins in master.
When you restore the backup to production in 7.0, the users get moved to DBO because the logins do not exist and then you cannot delete them.
We are having to drop the users from the database on development, back up the database and restore it to production, then recreate the users on production.
This is bogus and did not happen in 6.5 because of the aliases.
Anybody come up with a better way?
I am fairly new to VS 2005 and SQL Server CE. I have developed a Desktop Windows application using VB 2005 and the SQL Compact Edition Database. This application will sell to users via web download.
When they download a service patch, or updated version, I wish for them to retain the data in their present database. In other words, fill the new database with the old data. The new table structures will remain intact except for added columns at the end.
Question is how to save the old data and update the new database with it. Is there an easy way to do this, or do I need to write a module to save a database copy, and update the new database with content at install time?
Hi there,
I want to create database login and set that login to owner of the database? Can anyone help me?
thanks
11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
Sometime during the night last night some user account permissions were "lost". Am I right to think that restoring the master database would be the way to go? We have a 2 node 2012 cluster and I stop the cluster resource and start the db in single user mode from the active node. Somehow the sharepoint farm is still trying to connect so I can't get logged in single user. What method could I use to stop users from connecting when I don't have access to the sharepoint farm.
View 8 Replies View Relatedi have a development database that has updates and changes to a production database. rather than go through individually and alter all relevant tables and stored procedures, id like to back up the database on the development side and restore it on the production side as the production database. is there a way to restore the database on the production server but preserve all the security settings (ie logins and such)? i noticed on our development server, that if i try to restore the database with my development database, it overwrites the users and/or if the user is the same on both, it removes the login name for that user.
View 3 Replies View RelatedHi,
I was wondering how I could restore a bkp file into a database with a different name. For example, I made a backup of T1.mdf and i want to restore t1.bkp to T2.mdf.
I am using VB.Net to do the backup and restore.
Is there any way of doing it?
Thanks!
I have a client that has POS software called Restaurant Pro Express (RPE) from [URL] ...
Their old POS computer had a hardware failure, but I was able to attach the hard-drive to another computer and recover the data. RPE uses a MSSQL database system. However, my client doesn't seem to make backups very often
- the last one is dated January 5, 2015. I was able to copy the C:Program FilesMicrosoft SQL Server folder over which contained the instance as well as all the data files - and has up-to-date information. The instance in the recovered Microsoft SQL Server folder was called MSSQL.1. I installed the RPE software on their new computer, and it too now has an instance called MSSQL10_50.PCAMERICA. The new computer is using MSSQL 2008 R2, while I believe the old computer would have been using MSSQL 2005.
I am no DBA expert, especially when it comes to MSSQL. Is is possible to 'restore' the database from the 'raw' .mdf and .ldf files of the old computer to the new computer / database instance? If so, how should I proceed?
While attempting to set up sql replication in MSSQL 2005 one of my user databases is now in the systems database folder. I need to move it back to the user databases folder. Any help would be greatly appreciated.
View 16 Replies View RelatedHi guys,
I've been assigned the task of setting up access to our SQL Server 2005 box. A consultant developing for us has accessing to 2 databases and I've set this up fine. It appears however that one of these databases is re-copied over to the server every night to keep data reasonably current.
I'm not interesting in changing this method as I'm not the maintainer (as yet).
Basically I would like to know if I've setup access to this database (it works fine), when the database is updated (with an SSIS package) the account seems to get deleted. Do the original permissions from the source database overwrite those of its destination?
Cheers
I want a database user to be able to alter login, database user and database role from my application. so, i assigned that user to sccurityadmin server role, db_accessadmin and db_securityadmin database roles....By now, the user can add or remove login and database user. However, the user cannot add or remove any database role membership. What am I missing here?? What should I do so that the user can create, and alter database roles in the database??
View 1 Replies View Related
Hi,
Please give the T-SQL script for this ? Thanks
Shanth
Hi all,
I put "Northwind" Database in the Database Explorer of my VB 2005 Express and I have created the following stored procedure in the Database Exploror:
--User-defined stored procedure 'InsertCustomer'--
ALTER PROCEDURE dbo.InsertCustomer
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
INSERT INTO Customers
(
CustomerID,
CompanyName,
ContactName,
ContactTitle,
Address,
City,
Region,
PostalCode,
Country,
Phone,
Fax
)
VALUES
(
@CustomerID,
@CompanyName,
@ContactName,
@ContactTitle,
@Address,
@City,
@Region,
@PostalCode,
@Country,
@Phone,
@Fax
)
=================================================
In my VB 2005 Express, I created a project "KimmelCallNWspWithAdoNet" that had the following code:
--Form_Kimmel.vb--
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form_Kimmel
Public Sub InsertCustomer()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
"Initial Catalog=northwind;Data Source=NAB-WK-EN12345"
Dim connection As SqlConnection = New SqlConnection(connectionString)
connection.Open()
Try
Dim command As SqlCommand = New SqlCommand("InsertCustomer", connection)
command.CommandType = CommandType.StoredProcedure
command.Parameters.Add("@CustomerID", "PAULK")
command.Parameters.Add("@CompanyName", "Pauly's Bar")
command.Parameters.Add("@ContactName", "Paul Kimmel")
command.Parameters.Add("@ContactTitle", "The Fat Man")
command.Parameters.Add("@Address", "31025 La Jolla")
command.Parameters.Add("@City", "Inglewoog")
command.Parameters.Add("@Region", "CA")
command.Parameters.Add("@Counrty", "USA")
command.Parameters.Add("@PostalCode", "90425")
command.Parameters.Add("@Phone", "(415) 555-1234")
command.Parameters.Add("@Fax", "(415 555-1235")
Console.WriteLine("Row inserted: " + _
command.ExecuteNonQuery().ToString)
Catch ex As Exception
Console.WriteLine(ex.Message)
Throw
Finally
connection.Close()
End Try
End Sub
End Class
==============================================
I executed the Form_Kimmel.vb and I got no errors. But I did not get the new values insterted in the table "Custermers" of Northwind database. Please help and tell me what I did wrong and how to correct this problem.
Thanks in advance,
Scott Chang
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
How to maintain Database User Permissions when copying the Database from One SQL Server to another(Either through backups or sp_detach). The reason is the login sid is different in the target server and as a result the database user is not able to map to the login existing in the target server. The only way I can correct this is through dropping and recreating the user's again and assign the permissions, or change the system catalog - sysusers to remap the login to the user in the database.
I do not wish to use the sp_addalias as it is available only for backward compatibility.
Is there a better way of doing this ?
I had a major disk failure, and the only SQL Server files I was able to recover were master.dat, msdb.dat,msdblog.dat, two text files and two database devices. My question, is it possible in SQL 6.5 to restore a database from just the database device, and if so, how? Thank you.
MH
Hi,
I need to restore a database to different server.
Orignal .mdf is 16 G, Now on the new serever I have 16 G adn 12 G of drive space available.
Is there a way i can split the data of 1 mdf over to 2 or 3 data files on the new server ?
Thanks in advance.
:confused:
I'm a newbie so please be gentle.In attempting to run a restore I get the following error message:"Exclusive access could not be obtained because the database is inuse." However, it doesn't appear that there are any connections to thedatabase. At the suggestion of another thread, I ran sp_who2 and thereare no connections to the database in question. I've been running thesame restore for months and all has been well, until yesterday....I wrote an .asp page (below) to test connectivity to this database.The vb code ran successfully and soon thereafter, my nightly restorefailed. Task manager does no show that the asp page is active.Lastly, I did add a user ("jbtest") as well as change the option to useeither Windows authentication or SQL Server authentication inEnterprise Manager.Any ideas would be greatly appreciated.Thanks.<%@ Language=VBScript %><%companyName = "agemni"Set cnn = Server.CreateObject("ADODB.Connection")cnn.ConnectionString = "DRIVER=SQLServer;SERVER=SHEELA-NA-GIG;UID=jbtest;PWD=test1;APP=MicrosoftDevelopment Environment;WSID=SHEELA-NA-GIG;DATABASE=" & companyName &";Trusted_Connection=No"cnn.ConnectionTimeout = 300cnn.CommandTimeout = 300cnn.OpenSet RS = Server.CreateObject("ADODB.Recordset")strSQL = "SELECT * FROM Preferences"RS.Open strSQL, cnnResponse.Write "connection established with the <b>" & RS("CompanyName") & "</b> database. They are a <b>" & RS("street") & "</b>customer. "RS.CloseSet RS = Nothing%>
View 2 Replies View RelatedAny idea what is this error that I am getting when trying to change the db owner of the database as sa.Currently owner is different than sa.
Server: Msg 15110, Level 16, State 1, Procedure sp_changedbowner, Line 46
The proposed new database owner is already a user in the database.
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies View Related Cannot open user default database. Login failed.Login failed for user
'NT AUTHORITYNETWORK SERVICE'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Cannot open user default database. Login
failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
Hi, I'm new to SQL Express 2005.
I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue.
I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....".
Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively.
My connection string is:
"Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"
I would be grateful if you can help me
Running a report on sqlserver RS 2008 R2 that uses a data source that looks at a database on a sql express 2012 server.
I can run the report in preview mode from bits on the sql 2008 r2 server.
I have tested the connection of the deployed data source on the sql 2008 R2 reporting services web page and connection has been successful.
I can logon to sql express 2012 using management studio and logon as the user and access the database run stored procedures etc.
windows server 2003, sql server 2008 R2 reporting services server.
windows server 2012 sql express 2012 data source database location.
Hi,
I'm sorry if this is simple, I'm no DBA but have been tasked with solving this problem...
We have a website that connects via ODBC to SQL Server (2k sp1) and at the moment I am getting back about every other time:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open user default database. Login failed.
So this is NOT happening every single time. Now I have seen Microsoft KB - 307864 and I can see that none of the databases are marked as suspect, the database I am trying to connect to does exist and is attached and, I have run the command to switch the database to multi-user mode.
The probable cause of this problem is that a while ago we had a hard-drive failure and I was forced to reattach some old datafiles (mdf,ldf) as the database. This seemed ok and I can view data etc in enterprise manager no problem.
I have checked for orphaned users and the user I am logging in with from the webpage is not listed.
So does anyone have a clue as to why this is happening, and more frustratingly for me, why is it only happening some of the time.
Thanks for your help, appreciated.
James.
I am using SharePoint Services 3.0 (SP1) with default configuration options, which installs the Microsoft##SSEE instance of SQL to my local C: drive.
While attempting to relocate the files to another drive, I set one of the databases (as recommended) to Single User by using the SQL Server Management Express tool.
I cannot now reset that database to Multi User, even by executing the query
exec sp_dboption 'database_name', 'single user', ''FALSE'
again by using the Management Express Tool.
Can someone please help, in plain english???? Thanks
Hello,
We have a new production server with SQLserver 2005.
Our department responsible ofr the installation made it as secure as possible, however.
I have to put a new backup on to the server from the old production server.
We ran into a problem when we removed the old database.
I could not longer logon to the server with an authenticated user.
"A connection was successfully established with the server, but an error occured during the login process"
"Shared memory provider : error 0 : No process is on the other end of the pipe"
Strange thing is when i create a new database with the same name. The user can logon to the server again.
Any idea's ?
Jurgen
Hi everyone,
I try to add a db_role or a user to all my databases with one script. Although parsing doesn't report any problem I get a Syntax error during execution.
I first select the database names into a #temp table which has two columns, ID and dbname.
After that I use the following code:
DECLARE @Count smallint
declare @dbVarchar(20)
SET @Count = 1
WHILE (@Count <=(SELECT MAX(ID) FROM #temp))
BEGIN
Exec ("USE @db")
EXEC sp_adduser 'test'
EXEC sp_addrolemember 'my_role', 'testrole'
SET @COUNT = @COUNT + 1
SET @db = (SELECT dbname FROM #temp WHERE ID = @Count)
END
It seems that the "Use @db" part has no value for the variable @db.
Does anybody knows how to solve this?
I have a backup of an SQL Server database named "UserData.bak" now i want Restore this backup to my SQL Server.pls tell me whole process.Can i also restore it to MS-Access, if possible pls do let me know. Thanks
View 5 Replies View Related