Scenario: -
1. Full db backup
2. Database failure (delete all data)
3. Differential db backup (after 3 hour of db failure)
When i restore full db followed by the differential db backup, it only remains the differential db data.I do not have transaction log backup so that i can restore to the point.
What can i do to restore db that can have full backup and differential backup data?
Hello All,
I'm new to this forum after read a few question error it given me little bit more understanding. But here's my problem I was create a database implement some tables than make a 'Full Backup' and input information on the table before make a 'Differential Backup'. I don't want restore a full database and just want to recovery specific table were deleted or removed. Please help........
Message show error:
Restore failed for Server 'SALES18'. (Microsoft.SqlServer.Smo)
Additional information:
System.Data.SqlClient.SqlError: The log or differential backup cannot be restored because no files are ready to rollforward.
Thank you very much.
I have done a full backup on 3pm, and a differential backup on everyday 5pm.
I try to restore it back in my testing server and i encounter the problem in restoring the File3 and i try to restore the File 2 and it is okie. Can i know wat is the problem usually cause this error? Thank you
File 1: Full Backup
File 2: Differential Backup
File 3: Differential Backup
Windows Server 2003R2 w/ Sp2
MS SQL 2005 w/ Sp1
Currently run a weekly (full) backup and a daily (differential) backup.
When I format the server and rebuild I restored the DB using the weekly (full) backup and all worked as it should.
When I format the server and rebuild I attempted to restore the DB using the daily (differential) backup - I got the following error:
'SPCDBDIF.BAK ' is not part of a multiple family media set. BACKUP WITH FORMAT can be used to form a new media set. RESTORE HEADERONLY is terminating abnormally. (MS SQL Server, Error: 3259)
I am sure I am not using the differential file properly. What is the proper method to restore a DB and use a differential backup?
Any insight appreciated.
Thanks,
Kerry
Hi All,
I am trying to restore full backup in Sql Server 2005. I am using the following query to restore full backup.
"Restore database Testdb from Disk = 'C:Testdbfull.bak'
with move 'Testdb' to 'C:DBTestdb.mdf ',
move 'Testdb_log' to 'C:DBTestdb_log.ldf ', norecovery "
The above query is running successfully and database restored. But i am not able to access this database since in the database tab it is showing 'Testdb (Restoring)'
The next day I want to restore the differential database backup so i used the 'norecovery' statement.
please help why it is showing as '(Restoring)'
Thanks in advance,
Senthil
I create a full backup followed by daily differential backup, when I restore database from the fifth or later differential item, I get the following Error Message:
System.Data.SqlClient.SqlError: This differential backup cannot be restored because the database has not been restored to the earlier state. (Microsoft.SqlServer.Smo)
It seems that there is an error when the fifth differential backup occurred, It's a disaster, how can I do, help!
We are doing the following steps:-
1. Weekly Full Bckup
2.Daily Differential backup
3.hr Log back up
The following command works fine for all the Backups. it means backup file is fine.
RESTORE FILELISTONLY from DISK = 'D:BackupewDB_ full.BAK'
RESTORE HEADERONLY FROM DISK = 'D:BackupewDB_ ull.BAK'
RESTORE LABELONLY FROM DISK = 'D:BackupewTest_full.BAK'
RESTORE VERIFYONLY FROM DISK = 'D:BackupewTest_full.BAK'
Also The full back up restoration works fine:
RESTORE DATABASE Test3 FROM DISK = 'D:BackupewTest_full.BAK'
WITH MOVE 'Test2_Data' TO 'F:MSSQL2KMSSQLdataTest2Net_Data.MDF',
MOVE 'Test2_Log' TO 'F:MSSQL2KMSSQLdataTest2Net_Log.LDF',
NORECOVERY
GO
/* RESULT :
Processed 1032 pages for database 'Test3', file 'test2_Data' on file 1.
Processed 1 pages for database 'Test3', file 'test2_Log' on file 1.
RESTORE DATABASE successfully processed 1033 pages in 1.907 seconds (4.433 MB/sec).
*/
But While restoring the Differential file it throws error:
RESTORE DATABASE Test3 from DISK = 'D:Backupew est2_Diff1.bak'
WITH NORECOVERY
GO
Msg 3136, Level 16, State 0, Line 1
Cannot apply the backup on device 'D:Backupew est2_Diff1.bak' to database 'Test3'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I checked the SQL Server Log no error msg corresponding Differential backup restore.
I don't know how to proceed further.Can any one guide me how to over come this..
Thanks !
I am running the following script to attempt a restore of a differential backup:
RESTORE DATABASE AdventureWorks
FROM DISK='C:SQL2005_BackupsAutoBackupsAdventureWorks.bak'
WITH
NORECOVERY
GO
RESTORE DATABASE AdventureWorks
FROM DISK='C:SQL2005_BackupsAutoBackupsAdventureWorksDiff.bak'
WITH RECOVERY
GO
I thought this was the way to do it. It does restore the full backup, but on the attempt to restore the differential backup, I get the following error:
Msg 3136, Level 16, State 1, Line 1
This differential backup cannot be restored because the database has not been restored to the correct earlier state.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
Does anyone know what this means? Do I have to use "with recovery" on the first restore? (The sample I took this from used "with norecovery")
The original backups were done with SQL Agent scheduled jobs. The script for the full backup is:
BACKUP DATABASE AdventureWorks
TO DISK='C:SQL2005_BackupsAutoBackupsAdventureWorks.bak'
The script for the differential backup is:
BACKUP DATABASE AdventureWorks
TO DISK='C:SQL2005_BackupsAutoBackupsAdventureWorksDiff.bak'
WITH DIFFERENTIAL, INIT
All I can say is, it's a good thing I am testing this out with non-critical data, because I obviously don't know what I am doing. (Sorry, I'm primarily a programmer, not a DBA) Can anyone help?
Thanks
We have a 1TB Database. Our backup strategy looks like this.
Weekly Full backups - Saturday 10pm. (Takes anywhere between 5 - 9 hours)
twice Nightly Diffs (8:30p and 2:30am - Mid week this takes roughly 1.5 hours)
Hourly Log backups starting at 4:00am until 11pm.
I have an issue where I need to restore to 3:00 today. If my (2:30a)Diff is still running at that recovery point.
I am getting an error when trying to restore Full/2:30a Diff/4a Log with a stopat 3:00a.
Error telling me my log backup is incorrectly formed.
Can I, in fact, restore to this point at all? Do I need to go back to my previous Diff (8:30p) and restore the logs, if so, which ones?
My nighttime Diff ran from 8:30 - 10p.
I have logs at 9p, 10p, 11p, 4a
how it is possible to take differential backup of database automaticaly in sql server 2k?
plz someone help me out.
thanks
Rahul Arora
07 Batch
NCCE Israna,
######################
IMPOSSIBLE = I+M+POSSIBLE
hi seniors ,
I am running sql server 2005 under details
Microsoft SQL Server 2005 - 9.00.3033.00 (X64)
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit)
on Windows NT 5.2 (Build 3790: Service Pack 1)
When i attempt to take differentail backup i receieved following message
"Cannot perform a differential backup for database "abc",
because a current database backup does not exist.
Perform a full database backup by reissuing BACKUP DATABASE,
omitting the WITH DIFFERENTIAL option. [SQLSTATE 42000] (Error 3035)
BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013)."
when i search this msg on net than i find that it is microsoft bug 863 so i found hotfixes
about this problem and tried to install but unable to install (On installation screen select feature i am unable to click on check box)
Can any one help me regarding to this issue .And more is.. full back of db "abc" exists and i never changed its location nor rename file name.
Regards
receive an error: "Cannot perform a differential backup for database ..., because a current database backup does not exist." Can't fully understand what to do with this.
View 2 Replies View RelatedMy Database has many Dead lock issues,Will this Dead locks cause Differential database failure ?.
View 6 Replies View RelatedWe are getting a security audit for the company I work for and got this question recently, and while my answer would be "everything is possible", I know that DIFFs alone can't restore a SQL database.
Having said that (and don't want to read hypothetical comments) how can a hacker read confidential information from an unencrypted DIFF backup? Let's say he steals the DIFF backup alone.
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
I have a database that is just over 1.5GB and the Full backup that is 13GB not sure how this is since we have compression on for full backups and my other full backups are much smaller than there respective databases...Now my full backup is taken every Sunday night and the differentials are taken every 6 hours after the full backup. Now I have been thrown into this DBA role with little to no experience just what I have picked up and read. So my understanding of backups are limited but what I think I understand is that we take a full backup and the differential only captures what changes in the database so my question is why is my database 1.5GB but my differential is 15.4GB? I have others database that are on the same instance and don't seem to have this problem. I also just noticed that we do not rebuild the index before a full backup like we do on other instances...
View 13 Replies View Related11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
View 2 Replies View RelatedAnybody figure a way around this:
In a development server you take a backup and you want to move the entire database to a production server. The production server does not contain the database, users, or logins in master.
When you restore the backup to production in 7.0, the users get moved to DBO because the logins do not exist and then you cannot delete them.
We are having to drop the users from the database on development, back up the database and restore it to production, then recreate the users on production.
This is bogus and did not happen in 6.5 because of the aliases.
Anybody come up with a better way?
I am fairly new to VS 2005 and SQL Server CE. I have developed a Desktop Windows application using VB 2005 and the SQL Compact Edition Database. This application will sell to users via web download.
When they download a service patch, or updated version, I wish for them to retain the data in their present database. In other words, fill the new database with the old data. The new table structures will remain intact except for added columns at the end.
Question is how to save the old data and update the new database with it. Is there an easy way to do this, or do I need to write a module to save a database copy, and update the new database with content at install time?
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
Sometime during the night last night some user account permissions were "lost". Am I right to think that restoring the master database would be the way to go? We have a 2 node 2012 cluster and I stop the cluster resource and start the db in single user mode from the active node. Somehow the sharepoint farm is still trying to connect so I can't get logged in single user. What method could I use to stop users from connecting when I don't have access to the sharepoint farm.
View 8 Replies View Relatedi have a development database that has updates and changes to a production database. rather than go through individually and alter all relevant tables and stored procedures, id like to back up the database on the development side and restore it on the production side as the production database. is there a way to restore the database on the production server but preserve all the security settings (ie logins and such)? i noticed on our development server, that if i try to restore the database with my development database, it overwrites the users and/or if the user is the same on both, it removes the login name for that user.
View 3 Replies View RelatedHi,
I was wondering how I could restore a bkp file into a database with a different name. For example, I made a backup of T1.mdf and i want to restore t1.bkp to T2.mdf.
I am using VB.Net to do the backup and restore.
Is there any way of doing it?
Thanks!
I have a client that has POS software called Restaurant Pro Express (RPE) from [URL] ...
Their old POS computer had a hardware failure, but I was able to attach the hard-drive to another computer and recover the data. RPE uses a MSSQL database system. However, my client doesn't seem to make backups very often
- the last one is dated January 5, 2015. I was able to copy the C:Program FilesMicrosoft SQL Server folder over which contained the instance as well as all the data files - and has up-to-date information. The instance in the recovered Microsoft SQL Server folder was called MSSQL.1. I installed the RPE software on their new computer, and it too now has an instance called MSSQL10_50.PCAMERICA. The new computer is using MSSQL 2008 R2, while I believe the old computer would have been using MSSQL 2005.
I am no DBA expert, especially when it comes to MSSQL. Is is possible to 'restore' the database from the 'raw' .mdf and .ldf files of the old computer to the new computer / database instance? If so, how should I proceed?
I had a major disk failure, and the only SQL Server files I was able to recover were master.dat, msdb.dat,msdblog.dat, two text files and two database devices. My question, is it possible in SQL 6.5 to restore a database from just the database device, and if so, how? Thank you.
MH
Hi,
I need to restore a database to different server.
Orignal .mdf is 16 G, Now on the new serever I have 16 G adn 12 G of drive space available.
Is there a way i can split the data of 1 mdf over to 2 or 3 data files on the new server ?
Thanks in advance.
:confused:
hi
how can restore database when user use this database.?
to posibility any error and how can solution
I'm a newbie so please be gentle.In attempting to run a restore I get the following error message:"Exclusive access could not be obtained because the database is inuse." However, it doesn't appear that there are any connections to thedatabase. At the suggestion of another thread, I ran sp_who2 and thereare no connections to the database in question. I've been running thesame restore for months and all has been well, until yesterday....I wrote an .asp page (below) to test connectivity to this database.The vb code ran successfully and soon thereafter, my nightly restorefailed. Task manager does no show that the asp page is active.Lastly, I did add a user ("jbtest") as well as change the option to useeither Windows authentication or SQL Server authentication inEnterprise Manager.Any ideas would be greatly appreciated.Thanks.<%@ Language=VBScript %><%companyName = "agemni"Set cnn = Server.CreateObject("ADODB.Connection")cnn.ConnectionString = "DRIVER=SQLServer;SERVER=SHEELA-NA-GIG;UID=jbtest;PWD=test1;APP=MicrosoftDevelopment Environment;WSID=SHEELA-NA-GIG;DATABASE=" & companyName &";Trusted_Connection=No"cnn.ConnectionTimeout = 300cnn.CommandTimeout = 300cnn.OpenSet RS = Server.CreateObject("ADODB.Recordset")strSQL = "SELECT * FROM Preferences"RS.Open strSQL, cnnResponse.Write "connection established with the <b>" & RS("CompanyName") & "</b> database. They are a <b>" & RS("street") & "</b>customer. "RS.CloseSet RS = Nothing%>
View 2 Replies View RelatedI have a backup of an SQL Server database named "UserData.bak" now i want Restore this backup to my SQL Server.pls tell me whole process.Can i also restore it to MS-Access, if possible pls do let me know. Thanks
View 5 Replies View RelatedI want to add a new table to a database on a server. I assume the best way to do this is to backup db on sever, restore to local computer, add table, backup local, and restore to server. (If there is a better way, I am open).
I can backup the database on the server and get the backup to my local computer. However, when I use SQL Server Management Studio Express to restore the .bak file to my computer, I get the following error:
TITLE: Microsoft SQL Server Management Studio Express------------------------------
Restore failed for Server '\.pipe282F14E7-8852-4B sqlquery'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: RESTORE cannot process database 'C:USERSDEBORAHDOCUMENTSMY WEB SITESMHRRCSK3BETA1APP_DATAMHRRCDB.MDF' because it is in use by this session. It is recommended that the master database be used when performing this operation. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476
------------------------------BUTTONS:
OK------------------------------
So, I am not sure what to do next ... I have followed the links above to see there is no information. Any ideas? Thanks for helping this newbie.
The data in one of the tables in my datables got deleted.
I want to restore my database to an earlier time, but don't know how.
I'm not sure if I have any backups, I wasn't making any myself.
All I have is the ldf file, but I don't know how to open it or what it contains.