I created log shipping btw two servers using maintenance plan.
maintainanace plan taking the log backups and copying those backups in the standby server but unable to restore thos log backups
i am getting the following error ( for the Log Restore job)
Executed as user: NT AUTHORITYSYSTEM. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
In the logshipping monitor history i found the follwing error
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 4305: [Microsoft][ODBC SQL Server Driver][SQL Server]The log in this backup set begins at LSN 4830000001442600001, which is too late to apply to the database. An earlier log backup that includes LSN 4828000001884200001 can be restored.
[Microsoft][ODBC SQL Server Driver][SQL Server]RESTORE LOG is terminating abnormally.
I have setup logshipping between 2 SQL Server 2000 servers. It looks like everything is working (The transaction log files are being created, The log files are being copied to the secondary server. The restore job on the secondary server is running every 15 minutes successfully).
I cannot tell if it is actually applying the transactions.
If it is applying the transactions, it is not updating the monitor.
Does anyone have any ideas what might be causing this problem?
I am new to Forum. So not sure if i am posting my problem under the right topic.
We have a sql server 2005 enterprise edition 4 way cluster on windows 2003 advance server.
I am logshipping these database to a different server at a different location.
My logshipping went fine until one the cluster server failed and the server instance failed over to another node.
The backup that happened around that time got copied over to the secondary by the copy job.
The log file that got copied to the secondary server tried restoring and i think it failed int he middle of restoring it.
(You would think that the sql would knoe if the backup is in complete and will move on to the next file. Not sure what happened there.)
There is no indication of the *.TUF file in the directory where i have the log files.
I tried restoring it manually and i got the following error
Msg 4319, Level 16, State 3, Line 1
A previous restore operation was interrupted and did not complete processing on file 'sessionlog1'. Either restore the backup set that was interrupted or restart the restore sequence.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
I looked in the msdb..log_shipping_secondary_databases and looked for the last file that it restored and tried restoring it again with the following restore command by removing and adding some of the keywords that you see after the "WITH" clause.
MSFT do not recommand to use continne_after_error unless its absolutley necessary. I stilll get the above error.
restore log sessiondata
from disk = 'I:sql13qasmlogssessiondatasessiondata_20070901124516.trn'
with restart, CONTINUE_AFTER_ERROR, norecovery
When i add the restart int he with clause,
The restart-checkpoint file 'J:Microsoft SQL ServerMSSQL.5MSSQLBackupsessiondata.CKP' was not found. The RESTORE command will continue from the beginning as if RESTART had not been specified.
Msg 4319, Level 16, State 1, Line 1
A previous restore operation was interrupted and did not complete processing on file 'sessionlog1'. Either restore the backup set that was interrupted or restart the restore sequence.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
I checked it the backup directory and i can't locate the .CKP file.
Does anyone ever come accross this issue?
Is there anyother way i could recover this DB in a standby or norecovery mode.
Any kind of help to resolve this issue (beside copy the full backup and redo the whole log-shipping process again) would be appreciated. sicne my primary and secondary server are totally ina different location, i need to ship a tape, if i need a full backup. This is the 3rd time its happening on that cluster. its frustrating to ship a tape everytime this happens.
We are planning to setup log shipping model being setup between two sqlserver 2005 enterprise edition.
Our transaction log backup sizes are not consistent through out the day.The following is the scenario.
T1 at 8.00 -- 315MB
T2 at 8.30 -- 152MB
T3 at 9.00 -- 2.5GB
T4 at 10.00 -- 500MB
The bandwidth available is 25MB/minute. We are taking the backups of Tlogs at 30mins interval.Now at 'T3' log transfer we want to zip the file on the primary server,copy the file over the WAN and unzip it standby server.
Now i wanted to know whether to perform this kind of action(Zip,copy,unzip), can i create a separate job on primary ?? which will put the unzipped file on standby and allow the log shipping job to restore the log file (T3)
Also i wish to carry my T3,T4 etc backup -- copy-- restores through my Log shipping activity.
I cannot take 15mins backup on primary server to reduce the transaction log backup size.Thts another constraint i have.
Also tell me how to zip and unzip thru command line if u hve any link.
I am set up log shipping as backup and copy every one hour and restore every ( disconnect users and stand by) one hour on servers in same domain. Set-up completes successfully.Copy job works as expected. but the restore job fails intermittently to restore the .trn file saying ' could not apply log, data invalid' .
when i delete and copy the files for which restore failed manually using CTRL+C and CTRL+V across network and re run the restore job it does restore successfully . Through out the day i get about 5-6 problematic .trn files on secondary server which are copied from primary server and when restore fails i have to manually delete the log file which had problem restoring and then copy that file again using CTRL+C and CTRL+V then run the restore and it gets restored successfully.when running restore filelistonly on the logfile in issue on secondary server it gives below error
Cmd:
RESTORE verifyonly FROM disk='G:xxxx_Copyxxx_20150604010501.trn'
Error:
Msg 3203, Level 16, State 1, Line 2 Read on "G:xxxxxxx_20150604010501.trn" failed: 13(The data is invalid.) Msg 3013, Level 16, State 1, Line 2 VERIFY DATABASE is terminating abnormally.
and when i run restore filelistonly using netwok path then is seem s good and i can restore the logs as well
CMD:
RESTORE verifyonly from disk='1.2.3.4xxx_Backupsxxx_20150604010501.trn'
Output: The backup set on file 1 is valid.I can assure there is no corruption on the log back up, no lsn mismatch, no log files missing.Same version and edition on both servers. Both servers are SQL server 2012 Enterprise edition on window server 2012
Logshipping was working fine till last Friday...Looks like there was a cluster node failover during the weekend on the Secondary SQL cluster....From that time, restore log is not working, I am able to see all the log backup files are being copied to the secondary server...its no the transaction log backup share missing problem......I see this message:
The RESTORE statement could not access file 'J:MSSQLBackupDBName_200712081350.tuf'. Error was '2(The system cannot find the file specified.)'
I gooled and found that .tuf file has the LSN information as which log needs to be restored next....I looked at the sql error log and tried to restore the next log manually with "norecovery" option, but still get the same message....Is there any other option other than to remove and reconfigure logshipping ?
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Hello everybody . I have 40 GB db running mostly transaction processing. I set up 1. back full backup 2 times a day (takes 30 -40 min) 2. log backup every 15 min 3. custom log shipping 4. We don't won't use Cluster.
Once in while becouse of nethwork, or other problem log shipping fails, so I have to restart log shipping all over starting from restore in stand by mode last full back of my db.IT takes 2-3 hrs just to do this restore !!!
1. So I am asking advice is any way I do restore in less time ? 2. Should diffrential backup be taken ? 3. We will not use Custer
I'm finalizing our merge replication apps but we encountered some problem with the setup. We need to create a parameterized filter publication of 30+ articles. Most of the articles/tables contains large amount of existing data. One of them contains more than 20 millions records. during the creation of snapshot, the snapshot agent runs for a while and it will hang the process. The whole system cant seem to response anymore.
I tried on the other 25 articles with less data, everything was fine. is 20 million too much for snapshot?
Suddenly, the sql server is down, in the log file, C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG, I found the record as follows,
2007-03-05 15:40:31.59 Logon Error: 17189, Severity: 16, State: 1. 2007-03-05 15:40:31.59 Logon SQL Server failed with error code 0xc0000000 to spawn a thread to process a new login or connection. Check the SQL Server error log and the Windows event logs for information about possible related problems. [CLIENT: 172.21.123.48]
Hi I have problem when trying to resotre my DB from sql server 2000 to sql server 2005. You have to know also that my DB witch i want to restore with sql server 2005 maded with sql server 2000 and the message shown with attached pictures show the message detailes http://www.arabmoheet.net/forum/Members_Upload_Pics/1/sqlerror.JPG
I backed up a database to drive f:, then did restore and set options to move the .mdf and .ldf files to different HDs (f: for .mdf and d: for .ldf).
During restore I got a disk IO error. The restore terminated abnormally. Now I have no DB but the .mdf and the .ldf have been moved to the HDs that I specified in the restore options.
I cannot move the .bak file from the f: it gives me an IO error when I try this. It did allow me to copy the .mdf from f: to d:
I need to know how to recover the db frm the .mdf and .ldf files. I have tried using sp_attach_db and got the following error:
An error occurred while processing the log for database 'MyDB'
Hello, I have a database backup taken from SQL Server 2005. I originally had placed the backup into a file in My Documents, but when I went to locate the backup file there (C:/Documents and Settings...), the folders would not expand. So I moved the backup to the C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackup directory and was able to select the file there. When I try to restore this file into SQL Server 2005 Express using the Management Studio, I get the following error message:
Restore failed for Server 'DELL670DESKTOPSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476 ------------------------------ Program Location: at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv) at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore() =================================== System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLsequoia.mdf'. (Microsoft.SqlServer.Express.Smo) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476 ------------------------------
Can you please help me figure out what I am doing wrong?
I just restored a database on a new server with a backup(complete backup stored in backup device) from another database on another server using the "with move" option. In fact here was my process:
Alter database ngauge SET SINGLE_USER WITH ROLLBACK IMMEDIATE
restore database ngauge from disk = 'C:Program FilesMicrosoft SQL ServerMSSQLBACKUPgauge1.BAK' with move 'NGAUGE' to 'C:Program FilesMicrosoft SQL ServerMSSQLDatagauge_Data.MDF', move 'NGAUGE_Log' to 'C:Program FilesMicrosoft SQL ServerMSSQLDatagauge_Log.LDF'
Alter database ngauge SET READ_WRITE
it worked.
But it did not move the 98 or so users/logins...from the source database what is going on??? what am I doing wrong??!!
Hi, I am trying to restore a production copy. I have only the .bak file with me. While restoring, i m facing the following error. can u please help me... thanks in advance.
"MODIFY FILE encountered operating system error 112(There is not enough space on the disk.) while attempting to expand the physical file."
I have placed the data files(52GB) in D: drive(140GB free space) and transaction log file(100GB) in F: drive(465GB free space). Still i am facing this error...
We were trying to restore our production server db backup in test server over LAN (due to space shortage on test server) . Test server hanged and did not respond for abt more than 15 hours (backup file 40 GB ) . The we restarted the server (resetting the power button) . Now it's showing the status 'Restoring' . According to me it's not doing anything (as seen in task manager workload ) . So how can I go ahead with checking the db .
Due to 'restoring' status I get following error ------------------------------------ Msg 927, Level 14, State 2, Line 1 Database 'envdb' cannot be opened. It is in the middle of a restore. ----------------------------------
Hi, i need help about restore a DB I did a backup of a database using SQL Server Management Studio, but when i try to restore my database now, i get this error:
TITLE: Microsoft SQL Server Management Studio ------------------------------
Restore failed for Server 'Athenas'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: The media set has 2 media families but only 1 are provided. All members must be provided. (Microsoft.SqlServer.Smo)
What do i doing so bad?? Thanks for ur opinions and help. Regards ------------------------------------------
I have a two SQL 2012 databases in Development Environment as below:
1. LT_MSCRM (Main Development Database; Same database name is used across Testing and Live servers) 2. LTTEST_MSCRM (Just Created to practice something)
I have take the database back of LT_MSCRM from Testing server and want to restore it on LTTEST_MSCRM in Dev. Its failing because of the following error.
System.Data.SqlClient.SqlError: The file 'C:Program FilesMicrosoft SQL ServerMSSQL11.MSSQLSERVERMSSQLDATALT_MSCRM.mdf' cannot be overwritten. It is being used by database 'LT_MSCRM'. (Microsoft.SqlServer.SmoExtended)
Hi all, I have SQL server 2005 enterprise edition on windows server 2003 machine. when i took the back of the database from this sytem and try to restore the backup on SQL server 2005 R2 enterprise edition on client machine. it is giving me following error
" Restore failed for Server '10.112.12.229'. (Microsoft.SqlServer.Smo)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFX_Global_backup_200805141500.mdf'. (Microsoft.SqlServer.Smo)
"
Please tell what is the error about? Can it be possible to restore a back up of different operating system machine to other ?
The following failed in EM (or whatever it is called now managementstudio I think) and I scripted it out and ran it in a query window toget more info. This works fine in SQL 2000 but not in 2005. I also triedto 'create' the database first then ran this command below but with the'force restore over existing database' checked on but this failed alsowhich is odd as well. Any ideas. This is my very first play with 2005 soit is not off to a great start although to be fair, i seem to have gorlucky on the install as it all went OK. BTW, is there a more approriatenewsgroup for this query?ThanksRESTORE DATABASE [bob] FROM DISK = N'C:BigFujiCopiesBob.bak' WITHFILE = 1,MOVE N'bob_Data' TO N'c:Program FilesMicrosoft SQLServerMSSQLDataob_Data.MDF',MOVE N'bob_Log' TO N'c:Program FilesMicrosoft SQLServerMSSQLDataob_Log.LDF',NOUNLOAD, STATS = 10GOMsg 5122, Level 16, State 1, Line 1Directory lookup for the file "c:Program FilesMicrosoft SQLServerMSSQLDataob_Data.MDF"failed with the operating system error 3(error not found).Msg 3156, Level 16, State 3, Line 1File 'bob_Data' cannot be restored to 'c:Program FilesMicrosoft SQLServerMSSQLDataob_Data.MDF'.Use WITH MOVE to identify a valid location for the file.Msg 5122, Level 16, State 1, Line 1Directory lookup for the file "c:Program FilesMicrosoft SQLServerMSSQLDataob_Log.LDF" failed with the operating system error3(error not found).Msg 3156, Level 16, State 3, Line 1File 'bob_Log' cannot be restored to 'c:Program FilesMicrosoft SQLServerMSSQLDataob_Log.LDF'. Use WITH MOVE to identify a validlocation for the file.Msg 3119, Level 16, State 1, Line 1Problems were identified while planning for the RESTORE statement.Previous messages provide details.Msg 3013, Level 16, State 1, Line 1RESTORE DATABASE is terminating abnormally.*** Sent via Developersdex http://www.developersdex.com ***
I'm trying to restore my DB to a new server and also a new instance of SQL 2005 SP2+ hotfix KB934458.
I've successfully restored my MSDB database and everything seems to be working fine, but now when I'm trying to do a restore of my Database RMc to the attached SAN,
I'm getting the error:
System.Data.SqlClient.SqlError: The path 'H:' has invalid attributes. It needs to be a directory. It must not be hidden, read-only, or on a removable drive. (Microsoft.SqlServer.Smo)
the H: is the Drive letter for my attached SAN.
The path I'm trying to give is H:\DBData for the MDF-file and the H:DBLog for the LDF-file.
I have the DB running on another server also with a SAN attached and there are no problems.
I also moved the MSDB to another drive on the SAN - a G-drive without any problems.
I am moving my data base from one computer to a new one. I placed the .bak file in the backup folder on the new computer (Windows Vista). I keep getting these errors I have checked the security settings and my user account has full privledges. I added my windows login to the SQL Administrators as well.
Here is the error msg.: TITLE: Microsoft SQL Server Management Studio Express ------------------------------
Restore failed for Server 'laptopsqlexpress'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLPRM - 6009757.mdf'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------ What am I missing?
I have a database size of 9.8TB and I backup it to 30 backup devices. Each one has 110GB after backup compression.I tried to restore these files to standby server via 100MbE network but it always failed. My colleague told me this never happen before and I said yes because I have done this before a lot of times when backup devices are significantly smaller.He said the only way is to copy backup files locally and restore locally. But I am trying another method, I create more: 64(maximum) backup devices and try to restore via network again.SQL server version is Microsoft SQL Server 2012 (SP1)
- 11.0.3401.0 (X64) Jan 9 2014 13:22:15 Copyright (c) Microsoft Corporation Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) .
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLAlamoDB.mdf'. (Microsoft.SqlServer.Express.Smo)
--------------------------------
Hi,
I got this error while trying to restore my database (which was running on SQL Server 2005 Express Edition) onto another machine's SQL Server 2005 Express Edition.
I got this system error log in the event viewer every time I start the SQL Server cluster resource:
The Microsoft Clustering Service failed restore a registry key for resource SQL Server when it was brought online. This error code was 2. Some changes may be lost.
Even though the SQL seems to be working fine now, I won't know if something drastic will happen later. :confused:
Searching the Internet for resolution, I saw this article. The Microsoft Knowledge Base Article - 307469 (http://support.microsoft.com/default.aspx?kbid=307469) requires using the Windows Server 2003 ClusterRecover utility to reset the server cluster check points.
I've not tried it because I don't know if this is the correct solution or if it will work or not.
Can I even solve the error without using the above utility? I also cannot afford to reinstall the clustering or SQL server. :mad:
I'm working on SQL 2012 Box, which is having Logshipping failed on secondary database, the secondary database was in stand by mode right now but no more restore operation performed on this database since 2 weeks! We checked in the SQL error log and found the error code 14421, severity 16, stat: 1
How to reset the logship back to normally, do I need to disable the jobs before proceed any operation!
