Restore Hangs For 5 Hours?
Nov 8, 2007
Had a problem in a database and wanted to restore from disk as of 11/5/2007 (full backup). This particular database is only really updated about once a month, and changes were made on the sixth, so I thought this would be safe.
So (be kind - not an SQL guru), I ran something similar to:
RESTORE DATABASE myDatabase
FROM DISK = '\serverNamesqlbackupsmyDatabasemyDatabase_backup_200711052320.bak'
WITH NORECOVERY, STOPAT = 'Nov 05, 2007 11:21 PM'
myDatabase_backup_200711052320.bak is 42,084kb and has been running since 9:30 this morning (it's 2:20ish now). I've tried to take offline, stop/start sql services, restart server. Nothing works. It just keeps reading myDatabase (restoring).
Anybody help me out? How do I get it to stop and then do a clean restore?
Thanks so much,
Janet
View 6 Replies
ADVERTISEMENT
Nov 8, 2007
Had a problem in a database and wanted to restore from disk as of 11/5/2007 (full backup). This particular database is only really updated about once a month, and changes were made on the sixth, so I thought this would be safe.
So (be kind - not an SQL guru), I ran something similar to:
RESTORE DATABASE myDatabase
FROM DISK = '\serverNamesqlbackupsmyDatabasemyDatabase_backup_200711052320.bak'
WITH NORECOVERY, STOPAT = 'Nov 05, 2007 11:21 PM'
myDatabase_backup_200711052320.bak is 42,084kb and has been running since 9:30 this morning (it's 2:20ish now). I've tried to take offline, stop/start sql services, restart server. Nothing works. It just keeps reading myDatabase (restoring).
Anybody help me out? How do I get it to stop and then do a clean restore?
Thanks so much,
Janet
View 6 Replies
View Related
Mar 22, 2008
I've restored a database by the standard menu (the backup was a .bak file).
It worked really well, but now I can't use the database, but there is a "(Restoring...)" standing to the right of the database-name in the sql server management studio. I thought it should work like this and therefore was sitting and waiting, but hous later the status didn't change.
What shell I do?
View 8 Replies
View Related
Mar 22, 2008
I've restored a database by the standard menu (the backup was a .bak file).
It worked really well, but now I can't use the database, but there is a "(Restoring...)" standing to the right of the database-name in the sql server management studio. I thought it should work like this and therefore was sitting and waiting, but hous later the status didn't change.
What shell I do?
View 4 Replies
View Related
Oct 15, 2002
Hi everyone, I had to do a restore of a database from tape. I have the tape set to eject when it's complete, the tape ejects and the dialog box looks like the restore finishes fine. But when I look at the database after the restore it is still in the loading phase. So the restore never really took or looks like it hangs. Do you guys know why or how to fix this problem? Thanks in advance.
Stink!
View 1 Replies
View Related
Dec 18, 2007
i did a full backup of a database on machine 1 and am trying to restore it to machine 2.
when i try and restore on machine 2 it brings up the restore process window and just hangs, nothing happens. i'm restoring through EM
i've done plenty of restores on sql 2005 and never ran into an issue like this.
suggestions?
michael
View 2 Replies
View Related
Mar 15, 2008
My Vista system hangs immediately after I insert the second blank DVD. I'm doing a simple backup of my user files. I'm using Vista Premium, fully up to date with patches, minimal software installed because this system is 100% used as a Media Center. Hardware is off the shelf HP Media Center m8067n.
I checked Microsoft knowledgebase and no other similar cases popped up. Is anyone else experiencing this?
View 1 Replies
View Related
Sep 15, 2004
When I select All Actions>Backup Database and then click the ... button to choose a location on the hard drive, SQL Enterprise Manager Hangs and I have to kill it from Task Manager.
All other areas of EM browse the disk drive without a problem. (DTS, File Groups, etc.)
Anyone ever run into a similair problem?
Thanks
View 2 Replies
View Related
Apr 22, 2015
I want to display Days Hours Mins Format.
I am Having two columns Like below,
Col1 (in days) Â Â col2 (In Hours : Mins)
3days 4:5Â
In this first have to  add Col1 and Col2 (Here one day is equals to 9 hours ) so the addition is 31.5
From this 31.5 I should display 3 Days 4 Hours 30 Mins because 31.5 contains 3 (9 hours) days 4 Hours and .5 is equals to 30 mins.
View 6 Replies
View Related
Sep 21, 2006
I have data coming from a telephony system that keeps track of when anemployee makes a phone call to conduct a survey and which project numberis being billed for the time the employee spends on that phone call in aMS SQL Server 2000 database (which I don't own).The data is being returned to me in a view (see DDL for w_HR_Call_Logbelow). I link to this view in MS access through ODBC to create alinked table. I have my own view in Access that converts the integernumbers for start and end date to Date/Time and inserts some otherinformation i need.This data is eventually going to be compared with data from someelectronic timesheets for purposes of comparing entered hours vs hoursactually spent on the telephone, and the people that will be viewing thedata need the total time on the telephone as wall as that total brokendown by day/evening and weekend. Getting weekend durations is easyenough (see SQL for qryTelephonyData below), but I was wondering ifanyone knew of efficient set-based methods for doing a day/eveningbreakdown of some duration given a start date and end date (with theday/evening boundary being 17:59:59)? My impression is that to do thiscorrectly (i.e., handle employees working in different time zones,adjusting for DST, and figuring out what the boundary is for switchingfrom evening back to day) will require procedural code (probably inVisual Basic or VBA).However, if there are set-based algorithms that can accomplish it inSQL, I'd like to explore those, as well. Can anyone give any pointers?Thanks.--DDL for view in MS SQL 2000 database:CREATE VIEW dbo.w_HR_Call_LogASSELECT TOP 100 PERCENT dbo.TRCUsers.WinsID, dbo.users.username ASInitials, dbo.billing.startdate, dbo.billing.startdate +dbo.billing.duration AS EndDate,dbo.billing.duration, dbo.projects.name ASPrjName, dbo.w_GetCallTrackProject6ID(dbo.projects.descript ion) AS ProjID6,dbo.w_GetCallTrackProject10ID(dbo.projects.descrip tion) AS ProjID10,dbo.billing.interactionidFROM dbo.projects INNER JOINdbo.projectsphone INNER JOINdbo.users INNER JOINdbo.TRCUsers ON dbo.users.userid =dbo.TRCUsers.UserID INNER JOINdbo.billing ON dbo.users.userid =dbo.billing.userid ON dbo.projectsphone.projectid =dbo.billing.projectid ONdbo.projects.projectid = dbo.projectsphone.projectidWHERE (dbo.billing.userid 0)ORDER BY dbo.billing.startdateI don't have acess to the tables, but the fields in the view comethrough as the following data types:WinsID - varchar(10)Initials - varchar(30)startdate - long integer (seconds since 1970-01-01 00:00:00)enddate - long integer (seconds since 1970-01-01 00:00:00)duration - long integer (enddate - startdate)ProjID10 - varchar(15)interactionid - varchar(255) (the identifier for this phone call)MS Access SQL statement for qryTelephonyData (based on the view,w_HR_Call_Log):SELECT dbo_w_HR_Call_Log.WinsID, dbo_w_HR_Call_Log.ProjID10,FORMAT(CDATE(DATEADD('s',startdate-(5*60*60),'01-01-197000:00:00')),"yyyy-mm-dd") AS HoursDate,CDATE(DATEADD('s',startdate-(5*60*60),'01-01-1970 00:00:00')) ASStartDT,CDATE(DATEADD('s',enddate-(5*60*60),'01-01-1970 00:00:00')) AS EndDT,DatePart('w',[StartDT]) AS StartDTDayOfWeek, Duration,IIf(StartDTDayOfWeek=1 Or StartDTDayOfWeek=7,Duration,0) ASWeekendSeconds,FROM dbo_w_HR_Call_LogWHERE WinsID<>'0'
View 3 Replies
View Related
May 13, 2008
I have a float variable that holds a decimal number of hours.
So 1.5 equals 1 hour 30 minutes.
I need to change this to the format 1:30
Any idea how to do this?
View 10 Replies
View Related
Oct 29, 2015
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies
View Related
Dec 31, 2014
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
View 6 Replies
View Related
Jun 25, 2015
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
View 4 Replies
View Related
Jun 28, 2001
We have a few Servers that have space issues that need full DB Backups every day. As a result, we have to carefully watch how many DB Backup files we keep on the Server. On the Maintenance Plan, if I set the 'Delete files older than:' to '1' 'Day', will this delete anything over 24 hours old? What I have noticed, is that it tends to delete on Tuesday anything that was created on Sunday, but not Monday. Therefore, I am assuming that instead of '1 Day' being 24 hours, it is anything less than 47 hours and 59 minutes...
Is my assumption correct or do I need to look at something else. Thanks!
Billy
View 1 Replies
View Related
Oct 31, 2005
SELECT sysjobs.name, sysjobservers.last_run_outcome, CONVERT(varchar(8), sysjobservers.last_run_date, 112) AS LastRunDate, CONVERT(varchar(8),
sysjobservers.last_run_time, 8) AS LastRunTime, GETDATE() AS CurrentDateTime
FROM sysjobs LEFT OUTER JOIN
sysjobservers ON sysjobs.job_id = sysjobservers.job_id
WHERE (sysjobservers.last_run_outcome = 0) AND (CONVERT(varchar(8), sysjobservers.last_run_date, 112) >= DATEADD(day, - 1, GETDATE()))
I am wanting a similar solution, I need to convert an "int" to a time format, when I use this where ">= DATEADD(minute, - 720, GETDATE())" for the last_run_time I get this error:
Syntax error converting datetime from character string.
View 3 Replies
View Related
Jul 1, 2004
I ran the following:
ALTER TABLE Recipients ADD Obscene BIT NOT NULL DEFAULT 0
On a table with 80 million records. It's been running for 8 hours and counting now. This is ridiculous. No one else is using this server.
Server configuration:
SQL Server 2000 Enterprise Edition with SP3a
2 GB RAM
3.0 GHz P4 with hyperthreading
SCSI RAID
Any ideas why this is taking so long? Can I find out what it's doing? Is there anything I can do to make it go faster?
View 13 Replies
View Related
May 15, 2008
My database is current 135GB. I have been running the following:
DBCC SHRINKFILE([database_data],2)
DBCC SHRINKDATABASE ( [Database],20,TRUNCATEONLY)
It's been running for 28 hours. Should it be taking this long? If I stop the shrink, will it need to rollback?
Thanks!
View 2 Replies
View Related
Feb 29, 2012
I have a job that runs between the hours of 10 PM and 9 AM. It launches a controller stored procedure that will call other stored procedure until the entire process is done.I would like the controlling stored procedure to only call the steps between the hours of 10PM and 9AM also.. So at 8:59 AM it will start the next step, but at 9:00 AM it will exit.
View 6 Replies
View Related
Mar 17, 2004
I use SQL 2K with an Access 2000 project as front end. I have four date fields in a table. The first one should contain a date (eg 20th of February), the second one a starting hour (eg 8:00h), the third one the finishing hour (eg 10:00h) and the fourth should calculate the difference between the second and third column.
So I created four datetime fields. Storing a date in the first column is no problem, but storing only hours doesn't seem to do what I want. When I enter 8:00 from within the Access, it is stored 1/1/1900 8:00 in SQL Server. How can I make sure that the hours are saved with the date of the second column, so either as 8:00 without further information or as eg 20-2-2004 8:00?
View 14 Replies
View Related
Apr 21, 2015
I am querying a database that has hours worked listed by pay rate. I want to return sum of hours per pay rates I have been given but hours are stored in multiple columns. So If I run the below query for one worker it returns.
HoursBill_rate_1 Hours_2Bill_rate_2
34.2610.26 0.000.00
5.7410.26 5.689.67
I want to report to the business:
40hrs 10.26
5.68 9.67
The query I have written is below:
Select Sum(Hours_1) As Hours,Bill_rate_1,Sum(Hours_2) as Hours_2,Bill_rate_2--,Hours_3,Bill_rate_3
From Valid_Timesheets
Where (Department = '938' and tax_period = 3 and tax_year = 2015 AND PERSONNEL_REF = '991A001198') and
((Bill_Rate_1 = £10.26 or
Bill_Rate_1 = £9.67 or
Bill_Rate_1 = £8.27 or
[Code] ....
View 4 Replies
View Related
Jul 23, 2005
Hi,I have the following query:SELECT p.employee_code, p.employee_name,CONVERT(VARCHAR(12),t.tran_date,101) AS TranDate,CONVERT(VARCHAR(12),t.post_date,101) AS PostDate, SUM(tobill_hrs) ASTotalHoursFROM tat_time t, hbm_persnl pWHERE t.tk_empl_uno = p.empl_uno AND t.tran_date BETWEEN '2005-03-01'AND '2005-03-31' AND p.employee_code IN ('0340')GROUP BY p.employee_code, p.employee_name, t.tran_date, t.post_dateORDER BY p.employee_codeI would like to sum the tobill_hrs by week (Monday-Sunday) instead ofby day. For instance the user will put in a date range (a from dateand to date).Is this possible to do?Thanks!
View 9 Replies
View Related
Apr 18, 2006
I am creating a report that has call duration and if i run it over amulti-day span the duration is limited to 24 hours and starts over atzero. is there a way to not limit hours?I am usign the following in my select statement:convert(varchar(12), dateadd(s,SUM(ISNULL(Calls.OutgoingCallDuration,0)), '19900101'), 108) AS[Outgoing Call Duration]
View 3 Replies
View Related
Dec 14, 2007
Is there a function in SQL Server 2005 that can add GMT deviation hours to the existing date. I have a data field with the GMT_Deviation_Hours listed in numeric format e.g. -1, 12 etc. I have another date field to whom i wish to deviate the datetime according to the GMT_Deviation hours.
Thanks
View 2 Replies
View Related
Sep 28, 2007
Hi, i have this problem :
I have to compare 1 hour between two days , example:
I have this datetime value (BitacoraProcesoUsuario.FechaInicioProceso) in 108 format : 23:35:22
and I make this query:
Select TOP 100 * from BitacoraProcesoUsuario
INNER JOIN Turno
ON convert(varchar,BitacoraProcesoUsuario.FechaInicioProceso,108) > = '24:00:00'
AND convert(varchar,BitacoraProcesoUsuario.FechaInicioProceso,108) <= '06:29:00'
and returns nothing........ this because 23:35:22 is gtreater than 06:29:00' value, my question is how can I compare this hours in this format.
Regards
View 14 Replies
View Related
Feb 20, 2008
Would you help me ?
In the example below, how can I do to have count = 9 ?
It means that I have 9 periods of 30 minuts from 09:00 to 13:30.
Thank you.
declare initial_hour as varchar(10)
declare final_hour as varchar(10)
declare per30min as varchar(10)
declare count as int
set initial_hour = '09:00'
set final_hour = '13:30'
set per30min = '0:30'
set count = (final_hour - initial_hour) / per30min ------>>> count = 9
View 8 Replies
View Related
Feb 18, 2008
I would like to know the best method or the simplest method to do the following. Take a datetime value and subtract a given number of hours. I am taking a UTC time and subtracting a given number or hours in a query. I seem to be getting mixed results.
Thanks
View 2 Replies
View Related
May 16, 2006
Hi,
I need to make a select getDate() subtracting 4 hours...
How can I make it ???
Thanks
View 1 Replies
View Related
Jun 30, 2006
Hello,
Would some one please help me with the syntex on how to run "restore filelistonly" or restore verifyonly" on a SQL backup which has multiple filesets?? My backups locations are as follow:
RESTORE VERIFYONLY
From disk = 'E:syndicated_databank__bkup_01.bak',
'E:syndicated_databank__bkup_02.bak',
€˜E:syndicated_databank__bkup_03.bak€™,
€˜E:syndicated_databank__bkup_04.bak€™, €˜E:syndicated_databank__bkup_05.bak€™
I tried to do a restore with the above, I got error The label 'E' has already been declared. Label names must be unique within a query batch or stored procedure.
Please advise!!
View 3 Replies
View Related
Apr 27, 2007
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
View 4 Replies
View Related
Jun 26, 2001
I posted a message about this yesterday but I have more info..
I have a server (SQL 7.0, sp2) that anywhere I connect to it through EM the EM hangs. I can drill down into the server and even get into the Security drop down but if I hit Databases to drill down or Management etc. It hangs.
I did profiler on this and another server. When I click the + by the Database folder I hang and get
"TSQL:Batch Starting: exec sp_MSdbuseraccess N'db', N'%'"
but never get a "TSQL:BatchCompleted" for that statement. (Where other working servers I do get the set of both start and completed)
Drilling into the Security tab runs the query: exec sp_MSDBUserpriv... etc.) and this one works..
Anyone have any info on: exec sp_MSdbuseraccess N'db', N'%'
I can't find anything in BOL, Microsoft KB, Technet etc.. Please Help as there are certain things I can't do without EM... THANKS!!!
View 1 Replies
View Related
Feb 1, 2007
What is the best data type to use when tracking hours, for example;
2.30 < this is stored in DB
(two hours and thirty minutes)
5.15 < this is stored in DB
(5 hours and fifteen minutes)
View 15 Replies
View Related
Mar 26, 2008
MS SQLJust to confirm, I need to store the number of hours a user has spent doing something, am I correct using the smalldatetime field for the MS SQL database?I will eventually need to be able to calculate totals using SQL Reporting Services so it's important that the hours add up correctly (to 60 minutes, not 100).ASP.NETI'm trying to find the correct sort of formatting to use? Short time stores the time as 9:50AM, which isn't what i'm after.I need to store the hours as in 1 hour, or 01:00:00 (1 hour, 0 minutes, 0 seconds) or just 01:00 for 1 hour. I do need minutes but seconds are not required.I can't find the right formatting for this, would Long time be more suited?
View 18 Replies
View Related
