Hi everyone, I had to do a restore of a database from tape. I have the tape set to eject when it's complete, the tape ejects and the dialog box looks like the restore finishes fine. But when I look at the database after the restore it is still in the loading phase. So the restore never really took or looks like it hangs. Do you guys know why or how to fix this problem? Thanks in advance.
Stink!
Had a problem in a database and wanted to restore from disk as of 11/5/2007 (full backup). This particular database is only really updated about once a month, and changes were made on the sixth, so I thought this would be safe.
So (be kind - not an SQL guru), I ran something similar to:
RESTORE DATABASE myDatabase
FROM DISK = '\serverNamesqlbackupsmyDatabasemyDatabase_backup_200711052320.bak'
WITH NORECOVERY, STOPAT = 'Nov 05, 2007 11:21 PM'
myDatabase_backup_200711052320.bak is 42,084kb and has been running since 9:30 this morning (it's 2:20ish now). I've tried to take offline, stop/start sql services, restart server. Nothing works. It just keeps reading myDatabase (restoring).
Anybody help me out? How do I get it to stop and then do a clean restore?
Thanks so much,
Janet
Had a problem in a database and wanted to restore from disk as of 11/5/2007 (full backup). This particular database is only really updated about once a month, and changes were made on the sixth, so I thought this would be safe.
So (be kind - not an SQL guru), I ran something similar to:
RESTORE DATABASE myDatabase
FROM DISK = '\serverNamesqlbackupsmyDatabasemyDatabase_backup_200711052320.bak'
WITH NORECOVERY, STOPAT = 'Nov 05, 2007 11:21 PM'
myDatabase_backup_200711052320.bak is 42,084kb and has been running since 9:30 this morning (it's 2:20ish now). I've tried to take offline, stop/start sql services, restart server. Nothing works. It just keeps reading myDatabase (restoring).
Anybody help me out? How do I get it to stop and then do a clean restore?
Thanks so much,
Janet
i did a full backup of a database on machine 1 and am trying to restore it to machine 2.
when i try and restore on machine 2 it brings up the restore process window and just hangs, nothing happens. i'm restoring through EM
i've done plenty of restores on sql 2005 and never ran into an issue like this.
suggestions?
michael
My Vista system hangs immediately after I insert the second blank DVD. I'm doing a simple backup of my user files. I'm using Vista Premium, fully up to date with patches, minimal software installed because this system is 100% used as a Media Center. Hardware is off the shelf HP Media Center m8067n.
I checked Microsoft knowledgebase and no other similar cases popped up. Is anyone else experiencing this?
When I select All Actions>Backup Database and then click the ... button to choose a location on the hard drive, SQL Enterprise Manager Hangs and I have to kill it from Task Manager.
All other areas of EM browse the disk drive without a problem. (DTS, File Groups, etc.)
Anyone ever run into a similair problem?
Thanks
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies View RelatedIn Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
Hello,
Would some one please help me with the syntex on how to run "restore filelistonly" or restore verifyonly" on a SQL backup which has multiple filesets?? My backups locations are as follow:
RESTORE VERIFYONLY
From disk = 'E:syndicated_databank__bkup_01.bak',
'E:syndicated_databank__bkup_02.bak',
€˜E:syndicated_databank__bkup_03.bak€™,
€˜E:syndicated_databank__bkup_04.bak€™, €˜E:syndicated_databank__bkup_05.bak€™
I tried to do a restore with the above, I got error The label 'E' has already been declared. Label names must be unique within a query batch or stored procedure.
Please advise!!
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
I posted a message about this yesterday but I have more info..
I have a server (SQL 7.0, sp2) that anywhere I connect to it through EM the EM hangs. I can drill down into the server and even get into the Security drop down but if I hit Databases to drill down or Management etc. It hangs.
I did profiler on this and another server. When I click the + by the Database folder I hang and get
"TSQL:Batch Starting: exec sp_MSdbuseraccess N'db', N'%'"
but never get a "TSQL:BatchCompleted" for that statement. (Where other working servers I do get the set of both start and completed)
Drilling into the Security tab runs the query: exec sp_MSDBUserpriv... etc.) and this one works..
Anyone have any info on: exec sp_MSdbuseraccess N'db', N'%'
I can't find anything in BOL, Microsoft KB, Technet etc.. Please Help as there are certain things I can't do without EM... THANKS!!!
I have been trying all day to install SQL 7.0 on an NT 4.0 SP6a server. It gets to the point where it wants to load MDAC and just goes out to lunch. No errors are generated and the rest of the system does not appear to be affected. However, the only way to end the install is to end task it. Has anyone run into this?
View 1 Replies View RelatedSome of my jobs hang at FTP step for several hours until some one kills the FTP (it's a perl process) on the box. Is there a way to find how much time a particular step of the job is executing? and know it by somehow if it's hanging at that step?? If we know this,I want to kill the perl process(FTP) on the box in an automated way whenever the job hangs! Any ideas welcome!! Thanks. :-)
Di
Hi all - I'm having a problem with a dts job that I haven't run across before. The function of the job itself is pretty basic just moving data into a sql table using a few lookups and mappings. The job starts fine and gets to a status of 5000 records processed and just sits there. It's doesn't go into a 'not responding state' nor does it produce any error information in the error file I set up. Anyone have any thoughts on what might be happening? How to identify the specific record it may be hanging on? Help!! - this one is driving me nuts.
View 4 Replies View RelatedI'm running a pretty simply DTS just to pump some data into a table. Nothing fancy just a couple lookups and a couple columns being copied over. I get to 5000 records processed and the DTS just spins its wheels. It does not go into a 'not responding' state. There are no indexes on the table and the db size is plenty big so it is not reindexing or resizing the db at this point. Any ideas on how I can debug this one would be greatly appreciated.
Thanks
I am having a problem importing data into SQL 7 from any type of source. I go through the whole import process no problem. When I click the finish button to start the import, nothing at all happens. Enterprise Manager and the DTS just hang and I must use crtl+alt+delete to end the program. Can anyone give me any suggestions as to what might be happening. Big Thanks in advance, I've been working on this for days.
glevi
Anyone else had this problem ?
I've run dbcc check commands on a 5Gig database which has 2 Gig of unallocated space, with no problems with the tables or database.
However when i try to run dbcc shrinkfile ( on the DATA file ) from Query Analyser the command just runs indefinitely with no response.
Duncan
PS SQL 7 sp 2
I am having problems of my DTS package hanging when run through the sql server agent through a scheduled job. If I execute the job manually it runs fine? If I run the package manually it runs fine? Of course there is no way to actually tell what is being hung? Any ideas?
Thanks David
My client is using SQL Server 6.5 on NT 4.0. They have recently began to have their SQL server session freeze intermittently.
I have determined that only users that are accessing one particular database are freezing which leads me to a locking problem.
What is the best way to determine the locking problem (i.e. event logs, sp_lock, ....)?
Hello everyone,
I've done some searching, asking of friends, and searching every log file and event file I can think of. So now I'm coming here.
Recently I moved some of our databases from an NT4 box running SQL 7 to an Advanced 2000 box running SQL 2000. The web server is still on an NT4 box. It seems that about three times a day or so ASP type files will hang on the webserver. This server hosts different sites and all ASP type files will stop even if some of them hit the old SQL7 server.
Right now I moved the web server back to looking at the SQL 7 machine and things are going fine.
Can anyone offer me a direction to start looking? Why is it working fine to the old stuff but not the new stuff? Is there an issue with NT4 with its IIS trying to talk to an Advanced 2000 with its SQL2000?
Thank you in advance for any help.
I've written a recursive CTE to update a table's heirarchy data with a lineage that the CTE builds. This works and executes over 80,000 records on my local test environment in about 45 seconds. However when I try to execute it from a "production" environment, it hangs and never completes the update (well at least it's taking longer than 5 minutes and I'm too impatient to wait). The CTE itself still runs fine and returns data if I do a Select *, but not when I run the update. Here's my CTE, any ideas? Is there anything in database settings that would disallow this query update? or field requirements?
WITH MyLineage (ID, Lineage, ParentID)
AS (SELECT ID, CAST('.'+ convert(nvarchar(max), ID) +'.' AS nVarchar(max)) as Lin, ParentID FROM Equipment WHERE OrgID=2 AND ParentID IS NULL
UNION ALL
SELECT E.ID, CAST(L.Lineage+ convert(nvarchar(max),E.ID)+'.' AS nVarchar(max)) AS Lin, E.ParentID FROM Equipment E INNER JOIN MyLineage L ON L.ID=E.ParentID WHERE L.ID=E.ParentID)
UPDATE E SET E.Lineage=L.Lineage FROM Equipment E INNER JOIN MyLineage L ON E.ID=L.ID
If I try to do the update like this:
UPDATE Equipment SET Lineage=(SELECT Lineage FROM MyLineage WHERE MyLineage.ID=Equipment.ID)
it will hang in my local test environment as well. It seems like the other sql 2005 server instance is converting the join update into a nested select update, or something. I don't know what's going on, help?
Hi ppl
I have a DTS that is loading 6 text files into respective tables. Before loading this files the tables are emptied using SQL tasks with the following code:
DELETE
FROM Table1
WHERE (OMC=?)
OMC is a PK from table1 and ? is a parameter within the DTS.
Occasionally the system hangs executing these delete statements for one of the tables (not always the same!)
I’m forced to reboot and then DB goes trough a recovery process.
Any idea what might be wrong?
Thanks in advance
Hi,Currently it is running on SQL 7.00.623 on Winnt 4.0+SP5.Now i want to upgrade this with SP 4.As i follow the installation procedure according to MicrosoftSQL7SP4 readme help, It hangs during the installation of Mdac_typ.exe.Don't know where and whats went wrong with the procedure.I've tried 3-4 times to install it but the same problem raises. Pleasesome body assist me how to complete this installation.Thanks in advanceIvar
View 2 Replies View RelatedI have an SSIS .dtsx package that will run fine during debugging, however, when I run it as a job under the SQL Agent the job won't start.
To be more specific, the Agent will load the package, ensure that it passes validation (which it does), then sit there without starting the rest of the package.
The job will run under the "executing" status until I stop it manually.
Does anyone have any idea why it might be doing this?
I've installed SSE2005 (with SP1 and the hotfix rollup) on a Small Business Server 2003 SP1, and 90% of the time, all is well.
SSE is running two user databases; one for an ASP web-based application, and one for a desktop application. Occasionally, pretty much everything for both apps hangs for a number of seconds (variable, but probably about 10-30 seconds at a time). During the hangs, even using Management Studio Express becomes impossible, and Activity Monitor just times out, so I can't see what's happening. SSE's Errorlog and server Event Logs show nothing unusual.
The hangs tend to come in batches, on-and-off for an hour or so, after which the problem clears and it's service as usual.
Does anyone have any ideas what the problem might be, or at least how to start tracking it down?
Hi,
I have a package that runs just fine from BIDS. There are no message boxes in any scripts, or prompts of any kind.
However, when I attempt to the exact same package from a job, it just hangs forever.
Is there an obvious explanation for this?
Thanks
I have a problem where a SQL 2005 server in the morning will deny all connections do to a time out error. Sytem has 4 CPU's in it and sqlservr.exe is utilizing 85% of all CPU's. If I run filemon it does not show activity to any of the SQL databases. I get a login timeout message when I try to connect via the enterprise manager or from a command prompt, even if I bump the timeout delay to 5 minutes. If I restart the SQL Server services all is fine for a few days.
View 4 Replies View RelatedOn random occasions, our SQL Server instance will just hang and the users will not be able to use the application until we restart the SQL Server 2005 Service. Anyone have any ideas what we might do to figure out what is going on? The server hung up at 8:00 AM this morning. There was nothing after our midnight backup in the log until we rebooted the server at 8:05 AM.
Any suggestions would be greatly appreciated. Thanks! - Eric-
Hi,
Im trying to upgrade the PUBS DB from SQL 2000 to SQL 2005 using UA, the analysis starts well and progress and hangs at 28% for about 1 hours, what could be the reason, can any one help me?
Thanks in advance
Sakthi
Hello,
I did a search and found no answers. I have a simple project; one data flow task reading from one DB2 tabel and writing to another. My OLEDB source is a sql command that returns 97,000 rows and my OLEDB destination's data access mode is "table or view".
For my OLEDB source SQL command, I run it through the "build query" panel and I get all 97,000 rows back within 90 seconds everytime.
I don't know what is so different since I currently do SQL commands that bring back 2.5 million rows from DB2 with no effort in SSIS. I even took my data flow task and placed into a known good solution - but still hangs at 50% forever. I tried attaching to SSIS server and executing through there, again no luck. Still hung!
Any ideas? Thanks.
First off, let me say it took me nearly all day to get this working. When you download the sql2decksp3.exe you might think it install like any other program. No. This exe simply unpacks the setup files. The actual setup program, setup.exe must be run from a DOS command prompt.... so you've got to look up the correct command line parameters in the sp3reademe.htm file. Something like:
setup INSTANCENAME="InstanceName" SECURITYMODE=SQL SAPWD="AStrongSAPwd"
No problem so far, but then when I go to run the setup.exe with the correct parameters the install goes fine until the last 5 seconds. Then hangs. Again and again. The install program keep getting hung up just before the finish. Each time I had to uninstall and reinstall-- 6 times. When if it hangs you've got to break out with the Task Manager, then do an uninstall from the Control Panel... if... an entry there was created. It usually is.
I tried everything I could think of and then did a search here. There were a few messages. The only one who actually got past this problem said he deleted all references for "Microsoft SQL" in the registry. I tried that too. It didn't work for me. That setup hung in the very same place. Then instead of breaking out and starting again, I tried shutting the machine down, while the setup was hung, thinking that maybe after a restart the installation might continue AND and that point the install completed.
Hope these notes help the next person who runs into the same problem. I also tried putting the modem on standby and disabling Norton anti-virus. Alone that did help, but when I tried all this stuff together... finally at 4:34 PM, I was able to establish a connection, from both VB.NET and with a great FREE MS SQL Manager at http://sqlmanager.net/products/mssql/manager/download
Now I can start. For some reason, the way I think... I can't do any coding until the entire database spec is first set up. Then you write all the add, edit, display and sort form, windows. When designing web applications, you design the database first, then each web form preforms some unique operation or reference on the remote database. I think that's the way it works.
Hey! Hope this helps others.
Paul Townsend
I have setup SQL mail on SQL 7 sp3 running on NT 4 sp6a using a POP3 account (Lotus Notes 5.03 Domino Server.) I can bring up Outlook (2002) and send/receive works. Also, if I send a test mail from Operators this works as well. The problem is when using xp_sendmail the thing just hangs (xp_sendmail 'dmccallie@olanmills', 'Test') and I am left with a couple of processes in SQL that I can't kill. Is SQL mail really this hard or is it just a POS? I had been using a domain administrator account to start MSSQLServer and MSSQLAgent so I created a new domain account SQLSrvr with the same results.
Thanks in advance and any help would be great...DeWayne