Restore In Recovery Mode Fails Sometimes With [SQLSTATE 42000] (Error 3013)
May 26, 2008
Hi,
I run 2 steps viz with NORECOVERY and with RECOVERY in sequence as SQP jobs. The 2nd step fails some times. When it starts failing, I run full backup of the production server again and the 2nd step starts succeding. Unless I run the full backup the 2nd step keeps on failing.
What are the conditions which generate for [SQLSTATE 42000] (Error 3013) and how to tackle this problem.?
The 2 steps are :-
1.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
Replace ,
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
GO
2.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
Recovery
The status of the 2 steps is :
1 Executed as user: BPOTESTREMEDY
emedybackup. Processed 104480 pages for database 'ARSYSTEM', file 'ARSystem' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'ARSYSTEM', file 'ARSystem_log' on file 1. [SQLSTATE 01000] (Message 4035) RESTORE DATABASE successfully processed 104481 pages in 49.452 seconds (17.307 MB/sec). [SQLSTATE 01000] (Message 3014)
2. Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
View 3 Replies
ADVERTISEMENT
Nov 15, 2007
Hi,
This is my first posting and actually I have big problem which I need to resolve immediately:
I have a 38 GB Database on my SQL Server which I want to full-backup. Until now backup was created on the same volume where the database resides. But now the volume is out of disk space. So what we did is that we connected an external USB disk drive with 500 GB to the SQL Server and try to backup there.
But our first and all consecutive backup attemps failed with error SQL-DMO (ODBC SQLState: 42000). It's working fine the first few minutes as we can see that the backup file is continously growing. But then it abruptly aborts with above error message.
Can anyone figure out why ? Any help is appreciated.
Thx
Overlord1970
View 5 Replies
View Related
Jun 19, 2001
I am having a problem with a Job Step that is failing. The actual Step runs
a Stored Procedure, but the Job keeps failing and returning the following
error
"sqlmaint.exe failed. [SQLSTATE 42000](Error 22029). The step failed."
Does anyone know what this means ?
Thanks.
View 1 Replies
View Related
Sep 14, 2004
during maintenance plan i get following error :
Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 5070: [Microsoft][ODBC SQL Server Driver][SQL Server]Database state cannot be changed while other users are using the database 'AJAX'
[Microsoft][ODBC SQL Server Driver][SQL Server]ALTER DATABASE statement failed.
[Microsoft][ODBC SQL Server Driver][SQL Server]sp_dboption command failed.
[8] Database AJAX: Check Data and Index Linkage...
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 7919: [Microsoft][ODBC SQL Server Driver][SQL Server]Repair statement not processed. Database needs to be in single user mode.
View 2 Replies
View Related
Aug 7, 2007
Hello,
I'm having trouble running jobs with my active directory (ADS) account. I've setup my SQL services to run under an ADS account, but jobs cannot seem to query ADS for user information. We're running Windows Server 2003 and SQL Server 2005 SP2.
Here is the error message:
==
The job failed. Unable to determine if the owner (ADSme) of job eFASRtest has server access (reason: Could not obtain information about Windows NT group/user 'ADSme', error code 0x5. [SQLSTATE 42000] (Error 15404)).
==
also this message in log:
==
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'ADSme, error code 0x5. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
==
I already tested the suggested:
execute as login='adsme' and I get the same error on both (my local installations and production)
appreciate your help
View 23 Replies
View Related
Jun 11, 2007
Hi all,
I am getting error message 'An internal consistency error occured sqlstate:42000" when i am trying to restore the database.
Regards,
Shashi.
View 3 Replies
View Related
May 5, 2008
Hi Guys:
Our company wanted to try out SQL Server 2005 Enterprise Edition (64 Bit). So, we were on free trial of the Enterprise Edition for past 5 months. After which we decided to go for SQL SERVER 2005 Standard Edition (64 Bit). And, Last week, we installed the SQL Server Standard Edition (64 Bit) on our server. After installation, everything was restored as before.
The version we are on right now is:
Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
Strangely, a job which ran fine till then is failing with the following error: And, to be more specific, when this job is run manually in the form of a stored procedure using the query optimizer it runs fine. But, when its executed as a scheduled job on SQL Agent, it fails. The History logs record the following error.
Error :
The OLE DB provider "SQLNCLI" for linked server "LV-SQL2" reported an error. Authentication failed. [SQLSTATE 42000] (Error 7399) Cannot initialize the data source object of OLE DB provider "SQLNCLI" for linked server "LV-SQL2". [SQLSTATE 42000] (Error 7303) OLE DB provider "SQLNCLI" for linked server "LV-SQL2" returned message "Invalid authorization specification". [SQLSTATE 01000] (Error 7412).
I tried everything possible, even recreated the job, but, no avail.
I also considered the possibility if SQL Agent login account did not have enough permissions. So, I changed the SQL Agent login to windows authentication, but the job still fails. So, its the problem has nothing to do with login accounts either.
For the record, I have cross checked all these too.
1. Enabled the remote connections in Surface Area Config
2. Added local server login to remote server login mappings.
3. Checked 'Rpc' and 'Rpc Out' under server options. Also, the Connection Timeout and Query Timeout have been set to zero (0).
Any suggestions pointing towards problem solution appreciated.
Thank you.
View 4 Replies
View Related
Apr 9, 2001
We have a maintenance plan that runs every 15 minutes to backup a transaction log. It fails intermittantly with the message:
"sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
This is the only error message to be found in any of the logs. I've checked event viewer, the SQL error logs, exception log, maintenance plan log, sysdbmainplan_history table in msdb, but can't find any extra information. I checked the MSDN for info on this error and this did not add any extra light on the problem.
Does anyone have any ideas on how to de-bug this error?
regards
Stuart Ainsley
View 4 Replies
View Related
Jan 18, 2008
Good morning all. I need some help with a stored proc that is driving me up a wall. It's probably something stairing me right in the face but I can't see it!
I keep getting the following error on the procedure that I'm working on:
SQL-DMO (ODBC SQLSTATE: 42000)
ERROR 156: Incorrect syntax near keyword 'AS'
Must declare the variable '@signid'
Must declare the variable '@signid'
Here's the code:
CREATE PROCEDURE [dbo].[ws_savesignature2db]
@xml as text='',
@image as image='',
@imageformat as varchar(20)='',
@imagename as varchar(40)='',
@imagesize as int=0,
AS
insert into signaturetable
([image], imageformat, imagename, imagesize)
values
(@image, @imageformat,@imagename,@imagesize)
/*
if your XML field datatype is Text or nTEXT, use the code below in Sql Server 2000.
If you use Sql Server 2005, you can use varchar(max) or nvarchar(max) which will be
much easier and you do not need the code.
*/
select @signid = @@IDENTITY
DECLARE @ptrval binary(16)
SELECT @ptrval = TEXTPTR([xml])
FROM ws_signature
WHERE signid= @signid
if @ptrval is not null
WRITETEXT ws_signature.xml @ptrval @xml
GO
Any help you can give would be a life saver!!!!
Thanks in advance.
Jim
View 3 Replies
View Related
May 3, 2008
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
View 13 Replies
View Related
Nov 5, 2007
I'm not sure if this is the correct group for this messages, but here it is anyway.
I have a job that has 3 steps to, periodicly the job errors out on Step 1. Following is the message (from Job History).
--------------------
Executed as user: SMIsqladmin. The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction. [SQLSTATE 42000] (Error 7391) [SQLSTATE 01000] (Error 7312) OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]. [SQLSTATE 01000] (Error 7300). The step failed.
--------------------
Can someone please explain this message, I have no idea how to fix it or what the cause is.
Thanks
David Davis
View 1 Replies
View Related
Jan 3, 2001
I get the following error when I try to run my scheduled job.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Any ideas Thanks in advance
Reddy
View 1 Replies
View Related
Sep 13, 2001
I have log shipping set up between 2 SQL 2000 SP1 Servers on Win 2000. The db is small 10 meg, and when the restore job on the backup server fails I am getting "sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed." as the message, the maint paln on the primary server show no error. Anyone seen this before? The restore has worked 3 out of 5 times
View 2 Replies
View Related
Feb 29, 2008
Hi all help needed from your End.
I have a re-indexing stored procedure,yester day night it got failed
"Executed as user: CONNECTSRVmyadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed."
what may be the reason..
View 4 Replies
View Related
Jun 16, 2006
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
hi
I have a script which worked fine in SQL SERVER 2000. We have now upgraded to SQL SERVER 2005 (SP1). When I run the script from Query Analyser it works fine. But when I schedule the same script to run as a job, it fails and i get the following error:
Msg 102, Sev 15, State 1, Line 134 : Incorrect syntax near 'ge'. [SQLSTATE 42000]
Now, there is no problem with the syntax.
What could be the problem?? I have been searching for a logical answer on the Internet and although other people seem to have encontered a similar problem, I have yet to find an answer.
Million thanks if u can help.
Thanks
John
View 12 Replies
View Related
Jan 27, 2007
Hi,I have a Scheduled Job on my PC that runs against a Linked Server. Ihave scheduled the Job to run when SQL Server Agent starts and I haveconfigured my SQL Server and SQL Server Agent to start when the OSstarts. The connection to the Linked Server is via my Broadbandinternet connection.I have some suspicions as to the cause and hence a possible solutionbut I want to run my ideas past anyone else who may have experiencedthe same.1. Should I have my DSL modem turned on before I start the PC so thatthe Network connection is available when the OS starts?2. Are the Network connections only made available after you havelogged in and hence not established quickly enough before SQL Serverand SQL Server Agent are started?Yesterday, when I rebooted the PC with the modem still on theScheduled Job ran without failure but this morning again it failed. Myusual routine is to turn on the modem just before I login.If No. 2 is the case then maybe I just need to set the "Retryattempts" parameter.Thanks,Michael HolbertonHospedaje Los Jardines & Sacred Valley Mountain Bike ToursCusco Database Development and Cycling Serviceshttp://www.machawasi.com/http://machawasi.blogspot.com/http://databaseservices.blogspot.comhttp://serviciosdeciclismodelperu.googlepages.com
View 5 Replies
View Related
Jan 8, 2008
Problem Restoring Backup database in MSSQL 2000.I made a backup of one of my databases from one server and now I'm trying to restore to the production server (Clustering) using Enterprise Manager. I remote the server - launched Enterprise Manager and I select the restore from disk and I give the full path of a local drive in the server where the backup is located - when I clicked "ok" it first tells me: "Unable to verify the existence of the backup file location. Do you want to use the backup file location anyway?" If I answer "Yes" and "OK" it presents a error msg: "Cannpt open backup device 'c:.......bak. Restore database terminating - Microsoft SQL-DMO(ODBC SQLSTATE 42000). I have moved this backup around and I still get the same msg. Can anybody help - need assistance ASAP - thank you
View 4 Replies
View Related
Aug 1, 2001
Hello,
I have a file backup of a database from machine 1. I create an empty database with the same name on machine 2 and copied the backup file to machine 2. When I run a restore database, I get "Preceeding restore operation did not specify WITH NORECOVERY OR WITH STANDBY.Restart tehe restore sequence, specify the options for all but the final step. Restore failed"
Database : SQL 7.0 Trying to restore from the Enterprise manager
ANy clues as to what might be wrong.
Thanks, MMS
View 3 Replies
View Related
Jun 5, 2015
I am set up log shipping as backup and copy every one hour and restore every ( disconnect users and stand by) one hour on servers in same domain. Set-up completes successfully.Copy job works as expected. but the restore job fails intermittently to restore the .trn file saying ' could not apply log, data invalid' .
when i delete and copy the files for which restore failed manually using CTRL+C and CTRL+V across network and re run the restore job it does restore successfully . Through out the day i get about 5-6 problematic .trn files on secondary server which are copied from primary server and when restore fails i have to manually delete the log file which had problem restoring and then copy that file again using CTRL+C and CTRL+V then run the restore and it gets restored successfully.when running restore filelistonly on the logfile in issue on secondary server it gives below error
Cmd:
RESTORE verifyonly
FROM disk='G:xxxx_Copyxxx_20150604010501.trn'
Error:
Msg 3203, Level 16, State 1, Line 2
Read on "G:xxxxxxx_20150604010501.trn" failed: 13(The data is invalid.)
Msg 3013, Level 16, State 1, Line 2
VERIFY DATABASE is terminating abnormally.
and when i run restore filelistonly using netwok path then is seem s good and i can restore the logs as well
CMD:
RESTORE verifyonly
from disk='1.2.3.4xxx_Backupsxxx_20150604010501.trn'
Output: The backup set on file 1 is valid.I can assure there is no corruption on the log back up, no lsn mismatch, no log files missing.Same version and edition on both servers. Both servers are SQL server 2012 Enterprise edition on window server 2012
View 15 Replies
View Related
Nov 15, 2006
I have two instances (Source and Destination) on the same server, i did a full backup of a database on the source server, i did a restore on the destination using the NORECOVERY mode, now the database on the destination as green arrow saying "restoring". From the source database i set up the mirroring, i'm using port 5022 on source and 5023 on destination, everything seems to connect fine but when i start mirroring i get the error message "Database mirroring cannot be enabled because the database is not full recovery error: 1465" but when i look at the property of the db on the source the recovery model shows full as so the destination?
View 1 Replies
View Related
Jan 7, 2008
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
View 12 Replies
View Related
Aug 4, 2015
I'm working on SQL 2012 Box, which is having Logshipping failed on secondary database, the secondary database was in stand by mode right now but no more restore operation performed on this database since 2 weeks! We checked in the SQL error log and found the error code 14421, severity 16, stat: 1
How to reset the logship back to normally, do I need to disable the jobs before proceed any operation!
View 7 Replies
View Related
May 30, 2002
I am trying to restore a production database backup to a new location on a development workstation, and it fails with "An internal consistency error occurred, Contact Support". When I tried this on a more powerful workstation it ran without a hitch. The db is about 1.5GB, and I think the dev workstation may be running out of resources during the restore. I stopped non-essential services and ran from TSQL, and it still fails. Any suggestions other than getting a better workstation?
Thanks,
Rob
View 1 Replies
View Related
May 5, 2015
in the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
View 6 Replies
View Related
May 24, 2006
We are running SQL 2000 sp4, only one user database (SAP) the database is 63 GB.
The ldf files were trashed so I went to tape to restore.
We are using veritas backup exec 9.1 sp4. Veritas is on the same server. I can restore the master db and the msdb fine. However when we attempt to restore the DEV db it runs for 2 hours and then fails with a communication error from veritas.
When we restore the master the DEV db comes up suspect as there are no files for it to attach to) so we cannot attach to it to restore, so I have deleted it and attempted to restore - same communication error. I have recreated a db named DEV with the mdf etc created to the size needed plus some to be sure, no good same behavior (behavior described below).
The job starts and it creates all the folders for the database (there are 1 MDF, 5 NDF, and 4 LDF files each in its own folder). Then it begins to create teh individual files it gets ~half way through at about an hour-hour and fifteen. During this time there are a large number of writes being performed by SQL (I assume it is creating the structures). Then it switches over to reading from tape a large number of read by beengine for another 45-1.5 hours then the job fails with the error unable to communicate with the device. I ahve noticed that once it starts reading from tape the db is gone from enterprise manager, and the mdf etc. files that were being created are now gone.
Help this has gone on for three days!!!
View 11 Replies
View Related
Aug 1, 2006
Hi,
How to make all MSSQL DBs run in Simple log form by default other than FULL so when we srhink DBs the logs will go bybye. :-)
Thanks
View 10 Replies
View Related
Jun 5, 2007
Hi,
On SQL 2000, if I have a large transaction log for my database and I manage to fill it with a single large transaction but it is not set to autogrow, what happens?
View 6 Replies
View Related
Feb 19, 2008
We have 300+ databases on one sinlge server (SQL 2005). If I need to change recovery mode from full to simple for all of them, is there any way to do so? Please advice.
View 3 Replies
View Related
May 5, 2015
I have a db running under simple recovery mode. I am really pressed at disk space, and we have a long running script that keeps failing with "no space left on the device" error. I noticed the log file is very large. I plan to set the max log file size but at the same time I want to know that the database is in the log-truncate mode - perhaps from the database itself. Is there any metadata that could tell me this?
View 7 Replies
View Related
Oct 29, 2007
can t-sql be used to find out which recovery mode is on for a given db?
View 1 Replies
View Related
Mar 12, 2007
I have several databases that perform daily backups. Ever since I installed SP2, the backup jobs are failing. The logs state that it's because the database recovery mode cannot be SIMPLE, but need to be either FULL or Bulk-Logged.
Can anyone tell me if this is true, and that I do have to change my recovery mode?
Here's the error:
NEW COMPONENT OUTPUT
Microsoft(R) Server Maintenance Utility (Unicode) Version 9.0.3042
Report was generated on "ICIS-SQL-SERVER".
Maintenance Plan: DB Backup
Duration: 00:08:05
Status: Warning: One or more tasks failed..
Details:
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:09.
Task end: 2007-03-10T05:08:09.
Failed:(-1073548784) Executing the query "BACKUP LOG [hl7 db_SamirTesting] TO DISK = N'D:\mssql\backup\hl7 db_SamirTesting\hl7 db_SamirTesting_backup_200703100508.trn' WITH NOFORMAT, NOINIT, NAME = N'hl7 db_SamirTesting_backup_20070310050809', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:BACKUP LOG [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:09.
Task end: 2007-03-10T05:08:09.
Failed:(-1073548784) Executing the query "BACKUP LOG [dg_efilm_153] TO DISK = N'D:\mssql\backup\dg_efilm_153\dg_efilm_153_backup_200703100508.trn' WITH NOFORMAT, NOINIT, NAME = N'dg_efilm_153_backup_20070310050809', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:BACKUP LOG [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:09.
Task end: 2007-03-10T05:08:09.
Failed:(-1073548784) Executing the query "BACKUP LOG [hl7 db] TO DISK = N'D:\mssql\backup\hl7 db\hl7 db_backup_200703100508.trn' WITH NOFORMAT, NOINIT, NAME = N'hl7 db_backup_20070310050809', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:BACKUP LOG [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:08.
Task end: 2007-03-10T05:08:09.
Failed:(0) Database 'hl7 db_SamirTesting' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:08.
Task end: 2007-03-10T05:08:09.
Failed:(0) Database 'dg_efilm_153' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Back Up Database (Transaction Log) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-10T05:08:08.
Task end: 2007-03-10T05:08:09.
Failed:(0) Database 'hl7 db' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Back Up Database (Full) (ICIS-SQL-SERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All databases
Type: Full
Append existing
Task start: 2007-03-10T05:00:06.
Task end: 2007-03-10T05:08:08.
Success
Command:EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupmaster''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupmodel''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupmsdb''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackuphl7 db_SamirTesting''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupdg_efilm_153''
GO
EXECUTE master.dbo.xp_create_subdir N''D:mssqlackuphl7 db''
GO
BACKUP DATABASE [master] TO DISK = N''D:mssqlackupmastermaster_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''master_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [model] TO DISK = N''D:mssqlackupmodelmodel_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''model_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [msdb] TO DISK = N''D:mssqlackupmsdbmsdb_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''msdb_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP DATABASE [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
Please help,
-tim
View 3 Replies
View Related
Apr 1, 2008
Hello, I get the following error when I run my package interactively. From the logs written out by the driver, it appears that all is working well as far as connecting to the data source and pulling data. It seems as if this error occurs when the DataReader source tries to process the received data.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0047062 at Data Flow Task, DataReader Source [1]: System.Data.Odbc.OdbcException: ERROR [42000] XML parse error at 162:1338: not well-formed (invalid token)
at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode)
at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader, Object[] methodArguments, SQL_API odbcApiMethod)
at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader)
at System.Data.Odbc.OdbcCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Odbc.OdbcCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PreExecute()
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPreExecute(IDTSManagedComponentWrapper90 wrapper)
Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "DataReader Source" (1) failed the pre-execute phase and returned error code 0x80131937.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (691)" wrote 0 rows.
Task failed: Data Flow Task
SSIS package "MyPackage.dtsx" finished: Success.
I am not sure where to look next. Any help is much appreciated.
Dave
View 4 Replies
View Related
Feb 26, 2002
Hi,
Could anyone please tell me steps to recover the database from the suspect
mode. The backup I got is very old. Can it be recovered without the backup.
Thanks in advance
John Jayaseelan
View 1 Replies
View Related
