Restore Master Database With SQL 2005 Made An Error With Me
Mar 6, 2007
- First I made a full backup of master database
- Then I stopped SQL Server Service
- in cmd: cd C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLBinn
then sqlservr.exe -m
- I entered that single user mode
---> Problem here:
- I tried to connect to sql by sqlcmd -E --->
HResult 0xE9, Level 16, State 1
Shared Memory Provider: No process is on the other end of the pipe.
Sqlcmd: Error: Microsoft SQL Native Client : Communication link failure.
---> I tried to connect to management studio:
TITLE: Connect to Server
------------------------------
Cannot connect to BISHOYSERVER.
------------------------------
ADDITIONAL INFORMATION:
Login failed for user 'OFFICIALPROJECTAdministrator'. Reason: Server is in single user mode. Only one administrator can connect at this time. (Microsoft SQL Server, Error: 18461)
View 6 Replies
ADVERTISEMENT
Apr 27, 2008
I have never done this in a DR scenario before. What I used to do in SQL Server 2000 was apply the logins to a new installation of SQL 2000 then recover the application databases. I'm using 2005 now and I'm in a different mode where I would like to be able to recover the system (master, model, msdb) to a different server with the same SQL Server 2005 build ---- 9.0.3054. I'm following the procedures from Microsoft where they state to place the instance in single user mode first then invoke SQLCMD then perform the restore. Sounds simple enough.
C:> SQLCMD
> RESTORE DATABASE MASTER from DISK = 'Z:MINIDRmaster_backup_200804200315.bak'
The console is coming back with a message that the backup set holds a backup other than the existing master database. So I suppose that this cannot be done and is only intended for recovery on the same instance.
Any input/experience is appreciated.
Thanks.
View 6 Replies
View Related
Aug 3, 2006
I've tried starting SQL from the command line in single user mode (-m). When I try to open Management Studio I receive an error that it can't connect. Can you only restore master from a command line in SQL 2005? Or can I do it from a GUI?
Thanks,
Mark
View 9 Replies
View Related
Oct 23, 2000
How do I set the Master database to "single user mode"?
It is grayed out when I go to the property.
Thanks
View 2 Replies
View Related
Oct 20, 1999
I would like to restore the master database from a current backup tape but I got the error “Load database must be used in single user mode if trying to restore the Master database”. I tried to change the master database option but the option ‘single user’ cannot be changed for the ‘master’ database. Then I tried to start the SQL Server in Single-User Mode but I was not able to restore the master database from a tape.
Would anybody help me on how to restore the Master database like any other database?
Many thanks
Stella Liu
View 1 Replies
View Related
Jan 18, 1999
Hello All,
I am going through the procedure of restoring the master database as described in the Microsoft SQL 6.5 Survival Guide by SAMS. I deleted the master.dat file from c:mssqldatamaster.dat. I went into setup and choose rebuild master database. After rebuilding the master database, I went into setup again to add the "-m" server option to start server in single user mode so I can load the master database from backup. Then I went into Enterprise Manager to start the server. The server started, but when I try to double click on the server. It gave me the following
" A connection could not be established to [server name] - SQL server login failed."
I try reregistering the server, but gave me the same error. The SQL server is using standard security.
Does anybody know what I did wrong?
Pauli
View 2 Replies
View Related
Jan 8, 2002
Hallo
I do my backup using BACKUP database <myDB> TO DISK='D:BACKUPmyDB.bak'
I do this for ALL my databases every day.
Another product writes every day all the files on the server to tape EXCEPT the online databases because these files are open by SQL server 2000.
Now I restore the files of the tape to the server
This works well but I haven't got the online databases !!
And because the master database isn't available, SQL server wont start ...
BUT I have the backup of the master database 'D:BACKUPMaster_data.bak'
How can I use this master backup to do a restore even when SQL server can't start ?
Or must I do the bakup of the master database in another way ?
View 2 Replies
View Related
Apr 15, 2008
ALL,
When I attempt to restore a master database I am having some issues. I am using SQL Server 2000. I have set the start up option with -c -m to set the database in single user mode.
When I run the restore from enterprise manager I am get an popup window that is titled "SQL-DMo(odbc SQLSTATE:HY000)" with not message and then the database conection is lost. Thus the master datbase is appears to it was not resotred. As when I close enterprise manager and then restart the MSSQLSERVER service the database is in the same state.
Please advise on how i can get the Database restored.
Thanks
Chris
View 3 Replies
View Related
Jul 11, 2001
Hi everyone,
HELP!
I was wondering if someone could help me. I need to re-install the SQL Server (due to a registry corruption). What I plan to do is to:
- Detach all databases (including master, pubs, and tempdb)
- Copy databases to a different folder
- Uninstall SQL Server
- Reinstall SQL Server
- Copy the databases back
- Reattach all databases
Will that preserver all the security? (e.g. syslogins and sysxlogins) Will using an old "master" database on a new install pose any problems?
Any help will be GREATLY appreciated. Please email me at vchai@artinmotion.com
Thanks,
Vincent Chai
View 3 Replies
View Related
Nov 22, 2004
I have 2 database servers, 1 @ production and 1 @ DR site.
To restore the master database to DR on a regular basis, I have to rely on either the DBA or SysAdm to perform the restore. It's pretty expensive, as they have to dedicate some time to do so.
I'm exploring the possibility of getting the Data Centre staff to do this instead, as they are stationed at the DR site. Please advise the SQL permisssions required to restore master database.
We are running SQL Server 2000.
View 1 Replies
View Related
Feb 24, 2004
I wish to restore master database which was located on "e:" on my server.
the restored copy is residing on "f:"
when i restore the backup and restart, the server does not start.
is there any way to avoid this and perform the restoration succesfully.
or the process followed by me is wrong/incomplete.
do let me know...TIA
View 1 Replies
View Related
Jul 23, 2005
Hello,I need to restore the Master DB in my SQL 2k server (with sp3). Theproblem is that i don't have SQL backups of this file I only havegeneral backup of the entire c: drive i made using NTBackup. So itried all I know and succesfully run the rebuildm utility. Now when Itry to restore it from the general backup (not SQL backup) using"restore database master from gen_backup" i got error: "The file ondevice 'gen_backup' is not a valid Microsoft Tape Format backup set."RESTORE DATABASE is terminating abnormally.Any ideas how I can restore it?
View 2 Replies
View Related
Sep 20, 2006
Hello,
I have a fresh install of sqlExpress and Management Studio Express on my test server. I want to restore my master database from backup.
From the command prompt I set the Sqlservr -s SQLEXPRESS -m
Then I opened another comand prompt and ran my SQLCMD script to restore the Master Database.
here is the sql script:
RESTORE DATABASE [Master] FROM DISK = N'E:COPLEYNEWSDATABASEBACKUPMaster.bak' WITH FILE = 1, MOVE N'mastlog' TO N'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAMaster_1.ldf', NOUNLOAD, STATS = 10
GO
I recieve the following error.
Msg 3154, Level 16, State 4, Server COPLEYNEWSSQLEXPRESS, Line 1
The backup set holds a backup of a database other than the existing 'Master' dat
abase.
Msg 3013, Level 16, State 1, Server COPLEYNEWSSQLEXPRESS, Line 1
How do I restore a Master Database on SQL Express?
View 8 Replies
View Related
Apr 23, 2006
I am having problem restoring a data i backup in master database for an application upgrade. I have this error message that ' i can only restore in single usermode for master database that i should change to single user mode'
View 3 Replies
View Related
May 11, 2014
If one is regularly taking backups of system databases, when does it become necessary to rebuild the master database. I am looking for a situation where rebuilding the master is preferred to restoring it from backup.
View 1 Replies
View Related
Nov 18, 2007
Hi experts,
I had a database in sql server 2005 under instance name 'rohitcvman'. I took its backup. The computer is formatted and sql server 2005 is installed again with instance name 'rtamrakarcvmanager'. When I try to restore it, it ends up with the following message (copied from message box).
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Too many backup devices specified for backup or restore; only 64 are allowed.
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3205)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.0194&EvtSrc=MSSQLServer&EvtID=3205&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I also have its 'MDF' and 'LDF' file. When I try to attach it, I get the following message:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'rtamrakar'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 15, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'CVManager'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have not tried to restore/attach in the same instance name from which it was backed up. Is it compulsory to have same instance name to attach/restore?
Can any one help me?
Thank you.
View 13 Replies
View Related
Jan 31, 2008
I am using SQL server 2005 9.00.3042 . When I go to databases restore, restore to Northwind, from device
I select backup device and select SDLT. The actual backup device is LTO3.
The error is an exception occurred while executing a Transact-SQL statement of batch
Timeout expired. The timeout period elapsed prior to completion or the server is not responding.
I checked and we have no firewall turned on this server
I tried on another SQL 2005 9.00.3042 server - this one has an SDLT drive and the error is similar
Restore headeronly is terminating abnormally
View 2 Replies
View Related
Jul 29, 2014
Sometime during the night last night some user account permissions were "lost". Am I right to think that restoring the master database would be the way to go? We have a 2 node 2012 cluster and I stop the cluster resource and start the db in single user mode from the active node. Somehow the sharepoint farm is still trying to connect so I can't get logged in single user. What method could I use to stop users from connecting when I don't have access to the sharepoint farm.
View 8 Replies
View Related
Sep 20, 2006
Hello,
I have a fresh install of sqlExpress and Management Studio Express on my test server. I want to restore my master database from backup.
From the command prompt I set the Sqlservr -s SQLEXPRESS -m
Then I opened another comand prompt and ran my SQLCMD script to restore the Master Database.
here is the sql script:
RESTORE DATABASE [Master] FROM DISK = N'E:COPLEYNEWSDATABASEBACKUPMaster.bak' WITH FILE = 1, MOVE N'mastlog' TO N'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAMaster_1.ldf', NOUNLOAD, STATS = 10
GO
I recieve the following error.
Msg 3154, Level 16, State 4, Server COPLEYNEWSSQLEXPRESS, Line 1
The backup set holds a backup of a database other than the existing 'Master' dat
abase.
Msg 3013, Level 16, State 1, Server COPLEYNEWSSQLEXPRESS, Line 1
How do I restore a Master Database on SQL Express?
View 6 Replies
View Related
Feb 17, 2007
Cn not do anything with my sql server, everything i trt to do i get this message, user does not have permision, etc, ,
I am running windows Vista Business, SQL SERVER 2005
so what going on here
View 23 Replies
View Related
Feb 1, 2007
got rid of my error about user login rights, it was all working yesterday. but for some reason i now get this error CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): CREATE DATABASE permission denied in database 'master'.
An attempt to attach an auto-named database for file C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
i have this in my web.config file <connectionStrings> <add name="ConnectionStringTest" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=C:InetpubwwwrootsqlSiteApp_DatasiteDB.mdf;Integrated Security=SSPI;Connect Timeout=30;User Instance=False" providerName="System.Data.SqlClient" /> </connectionStrings> <appSettings /> <system.web> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <compilation debug="true" /> <identity impersonate="true"/> and my asp connection string is <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionStringTest %>" SelectCommand="SELECT [entryID], [compID], [emailAddy], [answer] FROM [entry]"></asp:SqlDataSource> if i set user instance to true i get a user permission error. it says on sql server management that i have dbo rights on my database, but it wont let me put datareader or write on this login. any ideas? its driving me insane
View 4 Replies
View Related
Jul 23, 2005
Hi,We are planning to create a prod environment on our Dev server, bycreating a new named instance on DEV. Our prod server is running onsql enterprise edition 64bit and dev on SQl enterprise 32bit.Could we copy all the databases from prod server includingMaster,msdb,model onto our dev server, and bring up all the databases?Does Master store information about the version of SQl server?Thanks for your helpGG
View 1 Replies
View Related
Apr 22, 2006
Hi,
In sys.transmission_queue is showing the transmission_status with error. "The session keys for this conversation could not be created or accessed. The database master key is required for this operation."
But I do have a Master Key in the database, and many External Assemblies depend on that. Is there an option to use the existing master key. How to use the existing key ?
Thanks in advance.
Regards
Babu
View 5 Replies
View Related
Oct 9, 2007
I need to rebuild a corrupted/deleted master database in SQL Server 2005 SP2.
When I run setup.exe from the install media as directed by SQL Books Online, I get to the point where it says the instance is a later version and setup cannot continue. Rerunning the SP2 installer, the instances cannot be selected for upgrade (and it ignores the command line options for the original installer).
How to proceed?
Also, it would seem simpler to have a detach, copy and attach the system databases process, rather than run the installer. (I realize you can stop the instance, copy files, restart the instance; but that's not "high availability".)
W.
View 11 Replies
View Related
Dec 14, 2007
Hi ,
I am trying to move the system database master database and mssqlresource database on SQL Server 2005.
I am going according to the doc's . And I am logging in as single user mode : NET START MSSQLSERVER /f /T3608 and when I try to login into sqlcmd or Management studio , I get the error:
SQL Error 18461 , can not login in more than one administrator server in single user mode.
For the managment studio , I close the object explorer as it is taken as one connection and click the new query with existing connection. But it throws me the same error. When I try to enter into sqlcmd , it throws me the same error.
What can I do here.. IS there anything I am missing.
Thanks
.
View 11 Replies
View Related
Aug 23, 2007
Hi, I'm testing my recovery on a sql server 2005 database. The server has been restored, which includes the OS and sql server 2005 installation (binaries, full tape restore). The tape restore didn't put back the master.mdf and other .mdf files (can't be backed up when open), so I need to rebuild the master and do a database recovery on it and the other supporting databases (yes, I have database backups). I have installed the sql 2005 setup CDs in a folder and run the following command to rebuild the master, but nothing happens, it pauses for a couple of minutes before it returns to the prompt, but it does not put and new master.mdf files in the folder and I can't start the service in single user mode. "start /wait setup.exe /qn INSTANCENAME=MSSQLSERVER REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=mypassword" Anybody have any procedures for a full sql server 2005 recovery or suggestions on this, please post.
Thanks, Mike
View 6 Replies
View Related
Oct 23, 2007
I use this command to change collation on SQL 2005 cluster.
start /wait <CD or DVD Drive>setup.exe /qn VS=<VSName> INSTANCENAME=<InstanceName> REINSTALL=SQL_Engine SKUUPGRADE=1 REBUILDDATABASE=1 ADMINPASSWORD=<StrongPassword> SAPWD=<NewStrongPassword> SQLCOLLATION=<NewSystemCollation> SQLACCOUNT=<domainuser> SQLPASSWORD=<DomainUserPassword> AGTACCOUNT=<domainuser> AGTPASSWORD=<DomainUserPassword>
The rebuild master database failed with the following message. Please help.
Microsoft SQL Server 2005 Setup beginning at Tue Oct 23 07:32:48 2007
Process ID : 3112
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.3042.0
Running: LoadResourcesAction at: 2007/9/23 7:32:48
Complete: LoadResourcesAction at: 2007/9/23 7:32:48, returned true
Running: ParseBootstrapOptionsAction at: 2007/9/23 7:32:48
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2007/9/23 7:32:48, returned true
Running: ValidateWinNTAction at: 2007/9/23 7:32:48
Complete: ValidateWinNTAction at: 2007/9/23 7:32:48, returned true
Running: ValidateMinOSAction at: 2007/9/23 7:32:48
Complete: ValidateMinOSAction at: 2007/9/23 7:32:48, returned true
Running: PerformSCCAction at: 2007/9/23 7:32:48
Complete: PerformSCCAction at: 2007/9/23 7:32:48, returned true
Running: ActivateLoggingAction at: 2007/9/23 7:32:48
Complete: ActivateLoggingAction at: 2007/9/23 7:32:48, returned true
Running: DetectPatchedBootstrapAction at: 2007/9/23 7:32:48
Complete: DetectPatchedBootstrapAction at: 2007/9/23 7:32:48, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__3112" returned false.
Running: PerformSCCAction2 at: 2007/9/23 7:32:48
Complete: PerformSCCAction2 at: 2007/9/23 7:32:48, returned true
Running: PerformDotNetCheck at: 2007/9/23 7:32:48
Complete: PerformDotNetCheck at: 2007/9/23 7:32:48, returned true
Running: ComponentUpdateAction at: 2007/9/23 7:32:48
Complete: ComponentUpdateAction at: 2007/9/23 7:32:49, returned true
Running: DetectLocalBootstrapAction at: 2007/9/23 7:32:49
Complete: DetectLocalBootstrapAction at: 2007/9/23 7:32:49, returned true
Action "LaunchLocalBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchLocalBootstrap__3112" returned false.
Running: PerformDotNetCheck2 at: 2007/9/23 7:32:49
Complete: PerformDotNetCheck2 at: 2007/9/23 7:32:49, returned true
Running: InvokeSqlSetupDllAction at: 2007/9/23 7:32:49
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.3042.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [DSQL1N1]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
Instance Name = DC1
Trying to find install through Instance Name
Install Type = 1
If possible, determine action
*******************************************
Setup Consistency Check Report for Machine: DSQL1N1
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
Article: Edition Upgrade Check, Result: CheckPassed
<Func Name='PerformDetections'>
0
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.3042.0
<EndFunc Name='PerformDetections' Return='0' GetLastError='997'>
*******************************************
Setup Consistency Check Report for Machine: DSQL1N1
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
Article: Edition Upgrade Check, Result: CheckPassed
*******************************************
Setup Consistency Check Report for Machine: DSQL1N2
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: CheckPassed
Article: Administrative Shares Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
Article: Edition Upgrade Check, Result: CheckPassed
The CheckSCCResult returned for cluster install is 0
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.3042.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2007/9/23 7:33:41, returned true
Running: SetPackageInstallStateAction at: 2007/9/23 7:33:41
Complete: SetPackageInstallStateAction at: 2007/9/23 7:33:43, returned true
Running: DeterminePackageTransformsAction at: 2007/9/23 7:33:43
Complete: DeterminePackageTransformsAction at: 2007/9/23 7:33:43, returned true
Running: ValidateSetupPropertiesAction at: 2007/9/23 7:33:43
Complete: ValidateSetupPropertiesAction at: 2007/9/23 7:33:43, returned true
Running: OpenPipeAction at: 2007/9/23 7:33:43
Complete: OpenPipeAction at: 2007/9/23 7:33:43, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2007/9/23 7:33:43
Complete: CreatePipeAction at: 2007/9/23 7:33:43, returned true
Running: RunRemoteSetupAction at: 2007/9/23 7:33:43
<Func Name='CProcessCtrl::GetInstallPath'>
<EndFunc Name='CProcessCtrl::GetInstallPath' Return='0' GetLastError='0'>
Error: 0x80070050 TaskScheduler::NewWorkItem for SQL Server Remote Setup
Error: 0x80070005 TaskSchedulerWorkItem failed to save the task [SQL Server Remote Setup ]
Complete: RunRemoteSetupAction at: 2007/9/23 7:33:43, returned false
Error: Action "RunRemoteSetupAction" failed during execution. Error information reported during run:
Attempting to determine log files for remote install.
Connection to remote computer's scheduler service.
Creating new workitem.
Deleting existing work item and trying again...
Starting remote setup onSQL1N2
Error: 80070005 Access is denied.
Running: PopulateMutatorDbAction at: 2007/9/23 7:33:43
Complete: PopulateMutatorDbAction at: 2007/9/23 7:33:43, returned true
Running: GenerateRequestsAction at: 2007/9/23 7:33:43
SQL_Engine = 3
SQL_Data_Files = -1
SQL_Replication = -1
SQL_FullText = -1
SQL_SharedTools = -1
SQL_BC_DEP = -1
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = -1
NS_Engine = -1
NS_Client = -1
SQL_DTS = -1
Client_Components = -1
Connectivity = -1
SQL_Tools90 = -1
SQL_WarehouseDevWorkbench = -1
SDK = -1
SQLXML = -1
Tools_Legacy = -1
TOOLS_BC_DEP = -1
SQL_SSMSEE = -1
SQL_Documentation = -1
SQL_BooksOnline = -1
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = -1
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = -1
Complete: GenerateRequestsAction at: 2007/9/23 7:33:44, returned true
Running: CreateProgressWindowAction at: 2007/9/23 7:33:44
Complete: CreateProgressWindowAction at: 2007/9/23 7:33:44, returned false
Error: Action "CreateProgressWindowAction" failed during execution.
Running: ScheduleActionAction at: 2007/9/23 7:33:44
Complete: ScheduleActionAction at: 2007/9/23 7:33:45, returned true
Skipped: InstallASAction.11
Waiting for actions from remote setup(s)
Breaking wait state and aborting package due to cancel code received: 1602
Remote setup(s) are ready
Notify package action is determined: 1602
Error Code: 0x800700e9 (233)
Windows Error Text: No process is on the other end of the pipe.
Source File Name: remotemessageliboverlappedpipelistener.cpp
Compiler Timestamp: Sat Oct 7 09:43:54 2006
Function Name: sqls:verlappedPipeListener::writePipe
Source Line Number: 294
Notification failed to send.
---- Context -----------------------------------------------
sqls::HostSetupPackageInstallerSynch::installAction
Removing machine from list of targets to sync.
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlsupport", referred by package: "as", will not be installed.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
All installs have been cancelled, so package: "owc11", referred by package: "as", will not be installed.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
All installs have been cancelled, so package: "bcRedist", referred by package: "as", will not be installed.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
All installs have been cancelled, so package: "msxml6", referred by package: "as", will not be installed.
Skipped: InstallDTSAction
Skipped: Action "InstallDTSAction" was not run. Information reported during analysis:
All installs have been cancelled, so package: "dts", will not be installed.
Skipped: InstallDTSAction.11
Skipped: Action "InstallDTSAction.11" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlsupport", referred by package: "dts", will not be installed.
Skipped: InstallDTSAction.12
Skipped: Action "InstallDTSAction.12" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlncli", referred by package: "dts", will not be installed.
Skipped: InstallDTSAction.18
Skipped: Action "InstallDTSAction.18" was not run. Information reported during analysis:
All installs have been cancelled, so package: "owc11", referred by package: "dts", will not be installed.
Skipped: InstallDTSAction.22
Skipped: Action "InstallDTSAction.22" was not run. Information reported during analysis:
All installs have been cancelled, so package: "bcRedist", referred by package: "dts", will not be installed.
Skipped: InstallDTSAction.9
Skipped: Action "InstallDTSAction.9" was not run. Information reported during analysis:
All installs have been cancelled, so package: "msxml6", referred by package: "dts", will not be installed.
Skipped: InstallNSAction
Skipped: Action "InstallNSAction" was not run. Information reported during analysis:
All installs have been cancelled, so package: "ns", will not be installed.
Skipped: InstallNSAction.11
Skipped: Action "InstallNSAction.11" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlsupport", referred by package: "ns", will not be installed.
Skipped: InstallNSAction.12
Skipped: Action "InstallNSAction.12" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlncli", referred by package: "ns", will not be installed.
Skipped: InstallNSAction.18
Skipped: Action "InstallNSAction.18" was not run. Information reported during analysis:
All installs have been cancelled, so package: "owc11", referred by package: "ns", will not be installed.
Skipped: InstallNSAction.22
Skipped: Action "InstallNSAction.22" was not run. Information reported during analysis:
All installs have been cancelled, so package: "bcRedist", referred by package: "ns", will not be installed.
Skipped: InstallNSAction.9
Skipped: Action "InstallNSAction.9" was not run. Information reported during analysis:
All installs have been cancelled, so package: "msxml6", referred by package: "ns", will not be installed.
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
All installs have been cancelled, so package: "sqlsupport", referred by package: "rs", will not be installed.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
All installs have been cancelled, so package: "owc11", referred by package: "rs", will not be installed.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
All installs have been cancelled, so package: "bcRedist", referred by package: "rs", will not be installed.
Skipped: InstallSqlAction
Clustered feature detected: SQL_Engine
Clustered feature detected: SQL_FullText
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.3042.0
Windows Error Text: User cancelled installation.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Nov 16 20:32:00 2006
Function Name: sqls::ReportChainingResults:erform
Source Line Number: 3667
---- Context -----------------------------------------------
sqls::RunRemoteSetupAction::waitForRemoteSetupComplete
king package: "patchRS2000" as failed due to cancel code received from cancel source: 1602
sqls
Delay load of action "UploadDrWatsonLogAction" returned nothing. No action will occur as a result.
Message pump returning: 1602
View 1 Replies
View Related
Feb 21, 2002
Hi Friends ...
I need your advice and help on the following problem . Say for example I have a SQL 7.0 Server A with 30 databases and i am in the process of transfering these databases to another system which is SQL Server B with 7.0 again .
Although the Databases can be copied by various means , can i restore Master database from the Server A to Server B so that my Server B will have all the database and login information as that of Server A.
As Master database is system database , it won't allow to be dropped and hence you cannot restore .
Is there any other way to restore Master database from One SQL server 7.0 to another with the same SQL version .
Any kind of assistance will be of great help to me . Many thanks in advance .
Kind Regards
Sneha
View 4 Replies
View Related
Oct 9, 2001
When I try to restore master, I keep getting an error message, while it is in the process of restoring, that says the connection has been broken. I assume it means the connection for single user mode. Any ideas on how to fix this??????
View 2 Replies
View Related
Jan 28, 2000
Does anyone have anything that can automate the restoration of the master database in MS SQL 7? I need to do it on a daily basis on a back up server. I also need to do the 2 production databases and the msdb and model as well. Does anyone have any suggestions to keep me from reinventing the wheel?
Thanks,
Tim Davis
View 1 Replies
View Related
Dec 7, 1999
I'm trying to nail down some procedures for disaster recovery of our SQL 6.5 databases. If I rebuild master (or do a fresh install), then create the devices based on the output of sp_helpdevice, and then create the databases based on the output of sp_help_revdatabase, do I really need to RESTORE the master database? Are there any other objects in the master database (except for maybe some custom stored procedures) that I really need from my production server?
I've just recreated the device and database structures manually, so do I really need to restore master?
Another issue: the current wisdom that I've seen is that although databases need to be grown back in the same increments, the devices do not. Therefore, you can just DISK INIT them to their current size. Does anyone think this is a bad idea?
View 4 Replies
View Related
Aug 16, 2002
I have a SQL 2000 server that when they installed it they changed the default settings of the locations of the data files. Master included. I now want to restore master to a standard location. However everytime I do it, I then cannot log onto SQL Server. Any suggestions!!
View 1 Replies
View Related
Apr 15, 2008
ALL,
When I attempt to restore a master database I am having some issues. I am using SQL Server 2000. I have set the start up option with -c -m to set the database in single user mode.
When I run the restore from enterprise manager I am get an popup window that is titled "SQL-DMo(odbc SQLSTATE:HY000)" with not message and then the database conection is lost. Thus the master datbase is appears to it was not resotred. As when I close enterprise manager and then restart the MSSQLSERVER service the database is in the same state.
Please advise on how i can get the Database restored.
Thanks
Chris
View 1 Replies
View Related