It may sound like crazy question, But just curious to know if any one tested this scenario.
I was restoring an existing database from a backup. While the restore is in progress, I found i was restoring with old back, then I canceled the operation.
Now Will it restore the partial data or it rolls back the entire transaction and brings back to original status or it will currupt the database??
Hi All,
I would like to restore database using RESTORE DATABASE ... REPLACE command.
If database exists already and has any open connections this command will fail.
I would like to close all existing connections to specific database before running RESTORE DATABASE ... REPLACE command.
I can do closing from Management Studio using checkbox "Close Existing Connection" when deleting database. Actually I need to do the same but from script.
Please advice me how to do it.
Thanks in advance,
Roman
I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
I need to recover some data in a table but i'm not 100% sure the right way to do this safely.
I'll need to query the two tables to compare the before and after but how do i go about restoring/attaching the backup database to SQL without causing conflicts?
If I restore, i assume this would just overwrite which is obviously the worst thing that can happen. If i attach the backup, how does this affect the current live DB? how do i make sure that it's not getting accessed and mistaken for the live DB?
The SQL server is 2008 R2 running as a VM.
I have a process that restores a backup from a primary server to a backup server daily. When doing the restore, sometime it fails (for various reasons).
I have coded a job to Set offline, set online, an then do the restore:
RESTORE DATABASE [xxx] FROM DISK = N'D:Backup Stagingxxx.bak' WITH FILE = 1, NOUNLOAD, REPLACE, STATS = 10
Sometimes it fails to bring back online, other errors as well. Is there a reliable method of doing this?
I need to recover some data in a table but i'm not 100% sure the right way to do this safely.
I'll need to query the two tables to compare the before and after but how do i go about restoring/attaching the backup database to SQL without causing conflicts?
If I restore, I assume this would just overwrite which is obviously the worst thing that can happen. if i attach the backup, how does this affect the current live DB? how do i make sure that it's not getting accessed and mistaken for the live DB?
The SQL server is 2008 R2 running as a VM.
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
Hi, My server went dead(problems with the hard disk), but I have a copy of the whole sql server directory including the database in a external hard disk. I have a new server now and I would like to copy this database (with the reports from reporting services too) from the external hard disk to my new server. can anybody help me please? Thanks.
Note : I have a plain copy of all the sql server directory with all the files including the database not a SQLServer backup done with the wizards.
Hi guys,
I've been assigned the task of setting up access to our SQL Server 2005 box. A consultant developing for us has accessing to 2 databases and I've set this up fine. It appears however that one of these databases is re-copied over to the server every night to keep data reasonably current.
I'm not interesting in changing this method as I'm not the maintainer (as yet).
Basically I would like to know if I've setup access to this database (it works fine), when the database is updated (with an SSIS package) the account seems to get deleted. Do the original permissions from the source database overwrite those of its destination?
Cheers
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
Any advice on how to get this thing finished out?
I am new to sql and my boss want me to write the program for database and he wants to pull the info from existing table from sql server which is used by Microsoft GP Dynamics and write me code or some kind of front end so when he wants he can pull same data from GP dynamics table and generate some report with other custom table.
How i can do this task? What I have to do in sql so I can use same table to view info in real time so that means if i enter new data in the table it will show up same time in the front end as well.
I have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.
If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:
Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).
It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.
Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.
I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.
ThanksTim
Hi There,
I want to know how to backup and restore database from VB.net. ie I am trying to put two buttons on my form, Backup and Restore. When I click on Backup a Backup of the SQL Database with extension of *.bak is created. Similarly when I click on restore and select a database with *.bak extension it should restore that database. I saw a software where it created a backup of Sql database with extension of .zip containing the bak file which is password protected. when u restore the database it automatically gets unzipped and the database is restored. Can anyone help me.
Thanks in advance.
Regards,
Amit
Hi,
Please help me in this regard, i am desparately need of this queries.
1. I have database and i want to copy the same database with another name(schema and Data remains the same on). Then the newly created database should be transferred to another location of the hard drive.
Can you write a script for me to the newly created to removed from the object explorer and copied to some hard drive location. Example "C:mydatabaseTest2Database.mdf", "C:mydatabaseTest2Database_log.LDF"
2. How to create a proper index on a table because some of the tables i don't have primary key. Give me an example.
3. write a script for "Attach" and "Detach" database.
please write a script to the above problem. Because i am working with Visual Basic programming. I will use these scripts to call from stored procedures.
Thanks.
Regards
Kashif Chotu
I am using MS SQL 2005 Express. I have a database with two filegroups, the PRIMARY default filegroup, and then filegroup X. I have a backup of the PRIMARY filegroup only, and am trying to restore it to my database. When I select the .bak file to restore from, I am NOT given any 'backup sets to restore' - I therefore cannot select the filegroup to restore it. Can anyone advise? (NOTE - I have backed up the transaction log on the database I am restoring to already)
Thanks
MArco
1) We have got the database dump (.bak) file in one machine and we need to restore this to another machine where the SQL server (version 7) is running. But in the restore option there is no way to choose any mapped or shared drives in remote machine. Any pointer to resolve this problem?
2) Can you set up a database if you have the .mdf and .ldf files?
I am running SQL 7 on two seperate NT4 servers, a production server and a standby server. Both servers are configured for Mixed Mode authentication. If I back up a database on the production server, do I also need to back up the master database and restore it. My reasoning behind this is that users' login details will be held in the sysxlogins tbl in the master, while their access rights will be held in the sysusers tbl in the database I am backing up and restoring. If I back up and restore a database without backing up and restoring the master db as well, will the connection between the system login and the database user be broken.
Any comments/suggestions would be appreciated.
Hi there...
can any one help in following situation.
Suppose in a network I have two sql server ABC and XYZ and XXX (NT server) on same sub net.
1) I take a backup from server ABC on XXX (NT).(ie.. backup on network)
2) Can I restore database in XYZ which was backed up by ABC? How???
3) Suppose My ABC machines fails and I have to again install SQL Server 7 on it, will I be able to restore database from XXX(NT)? how???
regards,
zak
Currently have large database in three devices, named Cabinet cab2 and cab3. Cab3 device has been expanded twice. We are upgrading the hardware and would like to get the database into one device named cabinet and clean the mess up our vendor initially created for us. Any Ideas/steps on how this could be accomplished??? TKS Jerry
View 2 Replies View RelatedUsing SQL 7.0, has anyone backed up a database and restored on to a different database without the device files being moved around.
For example, With SQL 6.5 we used to backup PROD (source) database and restore to TRAIN (target) database. It worked just great regardless whether the databases are located on the same drive or not. We loved it and used it to refresh TRAIN from PROD on a weekly basis.(using sql Enterprise Mgr)
However, in SQL 7.0 when we attempt this procedure the database and log files of the TRAIN (target) are getting relocated to the drive location of PROD (source) database. Very strange.
Though thru object transfer i.e. import ,we can import data from PROD(source)
to TRAIN (target) database, but it is very slow and takes lot of time and performance degrades for source database (PROD)
Any input on above will be appreciated if backup / restore thru
enterprise mgr or TSQL procedure works in SQL 7.0 for restoring another database which is also on different drive i.e PROD (source) database on
drive C and TRIAN (target) database on drive E.
Thanks
Rajiv
While this may be in the wrong forum, I thought that I should try here first.
One of the developers that works for this company would like to restore a sample database to the SQL server after installing our software.
Is there a command line command that can be issued to restore/create a database with a file (.bak) of an SQL database (sample)? If this can't be done, can it be done with VBScript or something similar?
SQL is not my strong point, and neither is development. Any help would be appreciated.
TIA.
Joe
Hi,
Two of my hard drives went down yesterday. and with it went the Sql server database.The data recovery guys recovered the back up database (.bak) file.I have since reinstalled SQL Server 2000 and now when i try and restore the .bak file it says the Microsoft tape back up file set is not valid when i try and open the .bak file.
Whats the right way to add my databse to the SQl Server2000 using my .bak file and if anyone has come across the error they could help.
Thanks
L
hey...
when i try to restore my database... they gave an error. the database is still in use.. is there a way to kill all the connections to that database ?
Hi,
A while back, I used SQL Server 2000 to back up a database. Now, I am wondering if there is a way to restore this backup into a SQL Server 2005 environment as I no longer use SQL Server 2000?
Thank you
Hi all,
Our Application is made to work with different database. I have a few query
1. There is option of restoring for only table, the tables can be mention during runtime, how to acheive same in sql
2. During restoring if already same data exists, it throws an exception , based on the exception we display the message data already exist. In sql any option is available to check the data exist or not
3. Can sql create the column during runtime.
Thanks
theres two .mdf files
game_log.mdf
game_data.mdf
is there a way to restore a database with these files but not with .bak (backup) files? i couldn't connect to database so i reinstalled sql server 2000 and this time i could connect to the sql server fine but when i tried to restore the database, it wouldn't work when i set it to transcation log and it shows an error
The preceding restore operation did not specify WITH RECOVERY or WITH STANDBY. Restart the restore sequence, specifying WITH NORECOVERY or WITH STANDBY for all but the final step. RESTORE LOG is terminating abnormally.
please help, thank you
Hello,due to some testing my SQL Server crashed. I have to reinstall it and ...For now I only have .mdf file and nothing else. My question is: is there anypossibility to restore this .mdf file for SQL 2000? I have some useful datain this file and there will be nice to use it.Best RegardsMarciN
View 2 Replies View RelatedIs there a way to restore a database backup file to the default data directory in a specific SQL 2005 instance using T-SQL?
I know that you can use the command RESTORE DATABASE, but that will restore the database files back to it original location. I also know that I can use the WITH MOVE option also, but is there a keyword or some special notation that I can use to make sure that the data/log files are moved to the default data directory for a specific SQL 2005 instance?
I am trying to avoid cases where the original file location does not exists in the current file system.
Thanks in advance,
Rodney
i was using mssql 2000
how can i restore my database on another server without affecting the data stored on that server,
or
would there be a wizard where i can compose a query of the design of the whole database and run those on another server to update its structure
Hi everyone,
I made a backup for my Bilgiler database and then by relying on this back up, I erased my Bilgiler data base. so now I tried to restore this Bilgiler database by using Enterprise Manager however I could not succeed.
How can I overcome this ?
Thanks
Pls tell me, can we restore database when database in use,if so how?
View 4 Replies View RelatedHello,
I am taking the error message which is in the below side,while restoring a database.(I am using sql server 2005)
The backup set holds a backup of a database other than the existing 'db1' database. (db1 is the database name.)
Can you help me?