I'm trying to run a test from my test environment which is a non-domain Windows 2000 server to access my domain 2003 with SQL2005. I have install 2005 tools to try to access the SQL server.
- I have try following the KB265808 - no success. - Reading alot of blogs and it seems all are pointing to the same problem. "Remote access" but the settign is enabled.Error Message:
TITLE: Connect to Server ------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=53&LinkId=20476
Question: Could Windows 2003 security be blocking access? I'm using sa account to access.
Also, sa account does not seems to work for remote access. It is ok when accessing locally.
I have a SQL backup that I created on SQL 2005 but need to restore it on a SQL 8.0 SP4 installation. I receive an error when I try to restore it. The error is :
Error 3169: The backed up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database. RESTORE FILELIST is terminating abnormally.
I am restoring a backup from SQL2000 Database to 2005 and I get this error :
An exception occured while executing a Transact-SQL statement or batch (Microsoft.SqlServer.ConnectionInfo) Additional Information: Too many backup devices specified fro backup or restore; only 64 are allowed. RESTORE HEADEEONLY is terminationg abnormally. (Microsoft SQL Server, Error 3205)
Just went through migrating to SQL 2005 as well and we have a need to apply log shipping between SQL 2000 and SQL 2005. Well not shipping per say in the automated fashion that SQL 2005 offers but rather we need to apply SQL 2000 transaction logs to a SQL 2005 instance. Though the database is still in SQL 2000 version 80 and the secondary database needs to be available in read only. (STANDBY MODE)
When I attempt to restore either a FULL backup or transaction log I get the error:
RESTORE DATABASE is terminating abnormally. This backup cannot be restored using WITH STANDBY because a database upgrade is needed. Reissue the RESTORE without WITH STANDBY
The only way I could restore the FULL was by using the WITH RECOVERY OR NORECOVERY option during the restore process. The issue with this is I need the database in standby by mode in order to continue to append transaction logs.
Anybody have any thoughts how I might be able to get around this?
If I restore a SQL 2000 DB into 2005 it upgrades it for me. When restoring a DB to a new server/instance of SQL, in SQL 2000 I had to carry out the sp_changedbowner procedure after the restore was complete. Is the equivalent procedure when restoring a SQL 2000 DB to 2005 to go to the schema for the restored database, find the schema with the name of the SQL 2000 db owner and change the schema owner? OR alternatively run the following query where mark is the db owner in 2000 and lladmin in the new user in 2005 ;
-A "master domain" AD, a "sub domain" AD, a trust relationship between the two (sub trust master) -A sql server 2005 on a win server 2003 in "sub domain" AD -A linked server to "sub domain" AD -A linked server login using a "sub domain" admin acccount -A view to this linked server -A grant on masterDomain/Domain Users to the database -A grant on subDomain/Domain Users to the database -We want all connections done through "Windows Authentication" not "Database Authentication".
Queries on the view work fine using "sub domain" user accounts. Queries on the view fail using "master domain" user accounts (including master domain admin accounts)
"Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "ADsDSOObject" for linked server "ADSI" reported an error. The provider indicates that the user did not have the permission to perform the operation."
All connections are done through "Windows Authentication" not "Database Authentication".
Can we establish cross domain connectivity with "Windows Authentication" ?
Below are details of the implementation:
SELECT TOP (100) PERCENT * FROM OPENQUERY(ADSI, 'SELECT displayname, givenName, sn, cn (etc...) FROM ''LDAP://OU=PEOPLE,DC=subDomain,DC=com'' WHERE objectCategory = ''Person'' AND objectClass = ''user'' ')
In SQL Server Mngt Studio in Server Objects/Linked Servers/Providers/ ADSI properties security tab I have:
"connections will: <be made using this security context> Remote login:'subDomainAdminAccnt' With password: 'subDomainAdminAccntPassword'
Error: Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "ADsDSOObject" for linked server "ADSI" reported an error. The provider indicates that the user did not have the permission to perform the operation.
Msg 7320, Level 16, State 2, Line 1
Cannot execute the query "SELECT displayname, givenName, sn, cn
FROM 'LDAP://OU=PEOPLE,DC=subDomain,DC=com'
WHERE
objectCategory = 'Person'
AND objectClass = 'user'
" against OLE DB provider "ADsDSOObject" for linked server "ADSI".
After using ADMT to migrate the domain user or group into the root domain, when I use enterprise manager to try and change the permissions allocated to that domain user/group, i get the 'Error 15401 NT user or Group not found'.
This is a correct error as the user is now in the root domain, however sql (in sysxlogins) still thinks its in the child domain.
Is there a simpler way, other than collecting the users permissions, deleting the user from SQL then adding back in with the correct domainusername format, then adding the permissions back?
I tried renaming the 'name' in sysxlogins (not recommended) and while that worked, whenever I tried to add the migrated user to another database, the login name was missing and would not resolve.
I believe it is something to do with the SID not matching.
we recently migrated from our in-house domain to the Enterprise domain. Everything went smooth except for the fact that I can no longer accept my dBs using my SA or my domain admin account. There is only 1 account I can get into the management studio with but it has no admin privileges, so I can't make any password changes or add accounts. I don't have a test environment so kind of hesitant to experiment with our production system.
I just upgraded my SQL 2000 server to SQL2005. I forked out all that money, and now it takes 4~5 seconds for a webpage to load. You can see for yourself. It's pathetic. When I ran SQL2000, i was getting instant results on any webpage. I can't find any tool to optimize the tables or databases. And when I used caused SQL Server to use 100% cpu and 500+MB of ram. I can't have this.Can anyone give me some tips as to why SQL 2005 is so slow?
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
I am unable to install 32-bit SQL Server Integration Services on the server due to something that was left behind by the 64-bit version.
I've uninstalled SQL Server 2005 64-bit and when I try to install the 32-bit version of Integration Services, I get this error: "Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087 Error message: Unknown error 0x80131501 Error descrition: FATAL: Could not find component 'Microsoft.SqlServer.Dts.Task.MessageQueueTask.ServCompMQTask' we just installed."
I can't seem to figure out how to resolve this problem with the COM+ and I can't remember if Integration Services is required.
Hi all,it happen to me a strange problem:i have a mdb file (in Access 2K) with SQL Server 2K linked tables whoruns on a workstation which is on a different domain that the SQLServer. It works.If i create a mdb file from a workstation which is a the domain of theSQL Server and then i run it a my non-domain workstation i have errormessage:Login failed for user '(null)'. Reason: Not associated with a trustedSQL Server connectionBut if i reattached my tables it works.If someone have an idea....PS: same ODBC on both machines
I have some production boxes on Win 2000 32-bits OS and some production servers have been upgraded to Win2003 64-bit OS runing SQL Server 2005. There are also a number of Win2003 32-bit OS running SQL 2005.
The issue is that when linking the 64-bit production servers to the 32-bit boxes running SQL 2005 / Win 2003 OS, the linking seems to succeed, but I am unable to see a number of entries in sys.objects. Typically, these objects are User Stored Procedures.
Moreover, the linking seemed to have worked, but data extraction does not take place between the servers. However, there are no errors. The objects (user stored procs) exist on the 64-bit side, but linking does not actually happen.
Microsoft KB has addressed this in SQL 2000 case in this KB article, but has not suggested a solution for SQL 2005.
I'm trying to set up replication from one SQL server to another.
The publishing server is not a member of a domain and is located in a hosting center (but we have full control over the server). I can set up a Snapshot publication just fine.
The subscribing server is located in another remote location and is a member of a domain. Here I can also set up the subscription without errors.
The errors, I think, comes when the snapshot is about to be created, the error is, on the publisher server:
[298] SQLServer Error: 18456, Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. [SQLSTATE 28000]
And the snapshot is not created.
Is it even possible to set up replication like this. I need to transfer the data from one sql server to another so we have a working "backup" so to speek if the other server does not respond.
Guys, I have problem in adding the user. The domain name "scs" that I am logged on a machine with user name "rao", But I am not able this user to SQL Server as scs/rao, it gives that the not found.
I am in the process of installing SQL Server 2005. Under Service Account I am selecting the domain user account option. It asks for the username, password and the domain name. How can I find out what the domain name is?
A while back I asked this in the SQL security forum, but did not receive any replies. I feel that this is a fairly basic, common question, so I am posting it here in the hopes that this forum has higher traffic and that someone here will know the answer.
I am trying to connect as follows:
Server: Windows 2003, SQL 2005, on a domain Client: Windows 2008 Beta, not on any domain
I created an account with the same user name as the domain user on the client machine. And then I logged in as that user and went to Manage Network Password. I entered the correct domain credentials. Verified that this worked for file shares. However, SQL does not appear to be recognizing this and it tells me:
Login failed for user ''. The user is not associated with a trusted SQL Server connection.
I have verified that this domain account is working properly with SQL when the client is also on the domain.
Q: How can I get this Windows authentication scenario to work where the client is not on the domain and the SQL server is on the domain?
(Note: A similar case that can also occur frequently is that the server and client are on different domains.)
1. How could I change the Domain within SQL Server. 2. When the NT Server changed to a new domain, Does the SQL server change also? Could someone help me. Thank you.
SQL2K SP2 on Win2K Server in single native-mode domain
I'm trying to change MSSQLServer and SQLServerAgent to run under a domain account instead of LocalSystem. SQL is not running on the DC. I get Error 22042:xp_SetSQLSecurity() returned error -2147023564, 'No mapping between account names and security ID's was done'.
The SQL machine is part of the domain. I'm logged in as a Domain Admin.
I can map to a domain to the server where I have a sql Server database from my machine which is in another domin. However, I cannot register the sql server with enterprise manager from the same machine. I am assuming that it is not a permission problem since I could not get the registration to work logging on as SA or with windows authorization. What should be looked at?
We have a network setup with two domain controllers, DC1 and DC2, working independently from eachother along with a DBserver1 that runs a BCM database and is a member of DC1. For certain reasons we would like to demote the DBserver1 and join it on the domain of DC2. What are the steps required in order to properly move a BCM Database running on SQL2005 to a new domain, where the security data lies in the active directory of DC1?
I have a IIS server on "A" Domain. My application is hosted on on a machine which is under that domain.
I have a DB server, SQL server 2000 on B Domain. The server is a named instance of SQL Server 2000. I have a default SQL Server 7.0 on that same machine.
For the application i am trying to connect from the IIS to database server, but i am unable to connect to the named instance, but i can connect to the default 7.0 instance.
The connection string used for the application is as follows: oConn.open "Driver={SQL Server};Server=server_nameinstance_name;Database= db_name;uid=user_name;pwd=password;"
I am getting SQL Server does not exists error messege on page...
Please help, me if any one knows how to connect to the database server which is on different domain and is a named instance using the connection string in ASP page..
