Restoring A DB File To An Existing DB
Apr 2, 2008
I am using MS SQL 2005 Express. I have a database with two filegroups, the PRIMARY default filegroup, and then filegroup X. I have a backup of the PRIMARY filegroup only, and am trying to restore it to my database. When I select the .bak file to restore from, I am NOT given any 'backup sets to restore' - I therefore cannot select the filegroup to restore it. Can anyone advise? (NOTE - I have backed up the transaction log on the database I am restoring to already)
Thanks
MArco
View 5 Replies
ADVERTISEMENT
Aug 13, 2007
Hi All,
I would like to restore database using RESTORE DATABASE ... REPLACE command.
If database exists already and has any open connections this command will fail.
I would like to close all existing connections to specific database before running RESTORE DATABASE ... REPLACE command.
I can do closing from Management Studio using checkbox "Close Existing Connection" when deleting database. Actually I need to do the same but from script.
Please advice me how to do it.
Thanks in advance,
Roman
View 3 Replies
View Related
Apr 17, 2015
I need to recover some data in a table but i'm not 100% sure the right way to do this safely.
I'll need to query the two tables to compare the before and after but how do i go about restoring/attaching the backup database to SQL without causing conflicts?
If I restore, i assume this would just overwrite which is obviously the worst thing that can happen. If i attach the backup, how does this affect the current live DB? how do i make sure that it's not getting accessed and mistaken for the live DB?
The SQL server is 2008 R2 running as a VM.
View 2 Replies
View Related
Dec 29, 2007
I have a process that restores a backup from a primary server to a backup server daily. When doing the restore, sometime it fails (for various reasons).
I have coded a job to Set offline, set online, an then do the restore:
RESTORE DATABASE [xxx] FROM DISK = N'D:Backup Stagingxxx.bak' WITH FILE = 1, NOUNLOAD, REPLACE, STATS = 10
Sometimes it fails to bring back online, other errors as well. Is there a reliable method of doing this?
View 1 Replies
View Related
Apr 17, 2015
I need to recover some data in a table but i'm not 100% sure the right way to do this safely.
I'll need to query the two tables to compare the before and after but how do i go about restoring/attaching the backup database to SQL without causing conflicts?
If I restore, I assume this would just overwrite which is obviously the worst thing that can happen. if i attach the backup, how does this affect the current live DB? how do i make sure that it's not getting accessed and mistaken for the live DB?
The SQL server is 2008 R2 running as a VM.
View 9 Replies
View Related
Aug 6, 2015
I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
View 5 Replies
View Related
Jul 30, 2007
I have a huge MDF File - 120 GB File (Had setup as 1 MDF initially) -- Did not anticipate that the DB would grow to that size!!
Anyways.. I heard that the general performance woul grow if i had them as "File Groups"..
Is there anyway - to split the existing MDF file into Mutliple files as a File Group?
Where should i start? Can someone please direct me..
View 1 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 6 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 3 Replies
View Related
May 15, 2006
good morning,
I want to load data that i receive everydays from my customers in .xls file format (excel) or cvs file format, to the database that i have created on this purpose. but when trying to do that whith SSIS; i got an error message .... that i can't import redudant data in my database column.
Best regards.
View 1 Replies
View Related
Sep 5, 2007
We have 2 SQL Server 2k5 servers running the same build - 9.0.2047 . When I backup any database from one server and attempt to restore it to the other, the log file generally increases by 100 fold. It errors out after I try to restore a 100MB db and it tries to create a 9.8GB log file. This happens both when I use the GUI to restore and when I restore from a T-SQL script. What am I doing wrong?
Thanks in advance.
View 1 Replies
View Related
Sep 16, 2004
It may sound like crazy question, But just curious to know if any one tested this scenario.
I was restoring an existing database from a backup. While the restore is in progress, I found i was restoring with old back, then I canceled the operation.
Now Will it restore the partial data or it rolls back the entire transaction and brings back to original status or it will currupt the database??
View 1 Replies
View Related
Apr 10, 2006
Hi,I'm new to sql but have a website running it on a hosted site. I want to have a local copy of the site running here for testing. I have everything set on my local machine to run it including MSDE and Enterprise Mgr.I've created a blank db with the same name,username and password on my local machine. From my host I received a dbname.bak file which they said I should just restore to my local machine. This sounded simple but I have no idea how to do this. When I right click on the db file within Ent.Mgr I see the Restore option but I can figure out how to designate the dbname.bak file as the source. I also see an option to import but that isn't any better.Does anyone have some simple directions which will show me the proper steps and where I should be to do this? I'd really appreciate it. I assume it's simple but not having ever done it it has me stumped.Thanks!
View 11 Replies
View Related
Aug 10, 2000
"Restore Now" button is greyed out after choosing to "Add File". I know I've done this before, can't figure out the problem.
View 1 Replies
View Related
Aug 25, 1998
I have a .dat file from a SQL Server 6.5 database and am trying to restore it on my server. Any help would be greatly appreciated. If you need more information, please let me know. If it`s not obvious, I`m new to SQL Server so try not to gloss too much over the details.
Thanks,
Nelson
View 2 Replies
View Related
Jan 12, 2004
Tried restoring a database from .bak file through Enterprise Manager and also by usng the following code :
RESTORE DATABASE DBB
FROM DISK = 'c:DBA.BAK'
WITH
REPLACE,
RECOVERY,
MOVE 'ap0data' TO 'c:mssqldataapm_data.mdf',
MOVE 'ap0Log' TO 'c:mssqldataapm_log.ldf'
But, I get an error :
Server: Msg 3156, Level 16, State 2, Line 1
The file 'd:mssql7dataapm.mdf' cannot be used by RESTORE. Consider using the WITH MOVE option to identify a valid location for the file.
I have got the two filenames i.e."ap0data" and "ap0log" by using the command "restore fileslistonly from disk = c:dba.bak".
Can anyone help me to do the things rigtly ?
View 11 Replies
View Related
Jul 27, 2007
I have tried unsuccessfully to attach a database that doesnt have its corresponding log file.
Is this possible in SQL 2005?
Please help.
View 5 Replies
View Related
Mar 2, 2001
I have a MSSQL7 data file mydata_data.mdf that I would like to load into my MSSQL7.
When I try to restore to my database, I got an error message saying MSSQl does not recognize the file as a valid backup file.
Your help is greatly appreciated.
View 1 Replies
View Related
Jan 8, 2008
Here is the problem in details :
It’s a classical ASP ( not .net ) website and it has a sql server 2000 backend database. I’m moving the website to a new windows 2003 server with sql server 2005 standard edition.
The hosting company ( Godaddy ) of the website refused to give me the mdf & ldf files for security reasons so they only allow to give .bak files.
I restored the database to sql server 2005 using the .bak file , the sql server has SQL server authentication, and everything seemed to be nice.
The problem is :
The database has a user name and he is the owner of the database schema. When I try to login with it the sql server says invalid login.
How to change the PASSWORD of this user after the backup?
I tried other scenarios to solve the problem but with no hope…. Some of them were:
•I added a new user to the SERVER security node, and I mapped it to the database schema, it worked fine BUT : all SQL statements in the code are like “ SELECT * from table� not “SELECT * FROM scehma.table�… so I don’t think the user was mapped correctly?
•I tried to delete the old user, but sql server said that he is the owner of the schema.
The only solution I have now is to change all sql statements in the code to be like “SELECT * FROM schema.table “… which will be a GREAT PAIN.
View 3 Replies
View Related
Jul 20, 2005
Hello.Can anyone tell me if a SQL Server 2000 database can berecovered only from the MDF and log files ?I have no backups.Thanks in advance
View 1 Replies
View Related
Oct 4, 2006
how 2 restore database in MS SQL 2005 using .mdf & .ldf file
View 4 Replies
View Related
Feb 21, 2008
Hello
I am trying to restore a file from a file/filegroup backup from our live server to a test machine but keep getting the following error:
The supplied backup is not on the same recovery path as the database, and is ineligible for use for an online file restore.
The location of the files on the live server are different to where they will be on the test machine but from my understanding of the restore t-sql i thought it the move would locate them to where they should be? here is my restore command i am running:
RESTORE DATABASE TestDB
FILE = 'File1'
,file ='File2'
,file ='File3'
,file ='File4'
,file ='File5'
,file ='File6'
FROM disk = 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupFileGroup.bak'
WITH norecovery,
MOVE 'File1' TO 'C:sqlarchivesFile1.ndf' ,
MOVE 'File2' TO 'C:sqlarchivesFile2.ndf' ,
MOVE 'File3' TO 'C:sqlarchivesFile3.ndf' ,
MOVE 'File4' TO 'C:sqlarchivesFile4.ndf' ,
MOVE 'File5' TO 'C:sqlarchivesFile5.ndf' ,
MOVE 'File6' TO 'C:sqlarchivesFile6.ndf',
I can not find any info about this error i am getting, can anyone point me in the direction of where to try and troubleshoot this message please?
Thanks
View 1 Replies
View Related
Sep 24, 2007
Hello everybody!
Does anyone know how to restore a database from a .dmp file? I'm using the SQL Server Enterprise Manager to do that.
I've searched within the program, but i didn't find anything.
Thanks.
View 5 Replies
View Related
May 28, 2015
Can we create the SDF file from existing Database in SQL server?
View 2 Replies
View Related
Jun 25, 2007
I got a .bak file from my friendI want to restore the data base in my system(presently I don’t have any database in my system).But while I try to restore itI am getting an error“System.Data.SqlClient.SqlError: Directory lookup for the file "D:Microsoft SQL Server 2005mydatabase.mdf" failed with the operating system error 2(The system cannot find the file specified.). (Microsoft.SqlServer.Smo)�I have installed Microsoft sql server in a different directory not in D: where he is installedI can successfully restore the back up files of data base on my own systemBut not the backup files created from others systems
View 2 Replies
View Related
Oct 30, 2007
Hi all,
My question is:
If I need to restore a database when all I have is the backup file, do I need to recreate all the tables, or is it possible to restore into a new database ?
Is it possible to restore a sql server 2000 database into a sql server 2005 database ?
Thanks in advance.
View 2 Replies
View Related
Mar 26, 2008
Hi all,I have installed sql server express edition and using this with asp.net website application. It was working fine,I am using .mdf file as database in app_code folder of asp.net website application, but now there is one issue which is with a particular table records.In this table some of the columns has got the same value for all records in the table. so, now i want my previous(original) data as backup, but unable to do so. I am using third party tools for recovery. Can anyone please guide me to resolve this issue.Thanks in advance
View 2 Replies
View Related
Nov 28, 2000
Hi Everybody,
Our branch office in Europe has sent full 'backup' file of capacity 25GB.
I have to restore this backup to our database. Their database is 'Candidate'
and our database is 'client'. Both these databases have different logical
names and physical names.
The following Batch script only I hv executed,
RESTORE DATABASE Client
FROM DISK = 'd:dumppaw01dump.bak'
WITH MOVE 'candidatedata' TO 'e:mssqldataclient_data.mdf',
MOVE 'candidatelog' TO 'd:mssqllogclient_log.ldf',
REPLACE
Can anybody tell me, what I have executed above is correct or not. Now
restoration is going on for more than an hr. Still it is going on. Is there
any other way to restore this backup set very fastly.
Our server has got very good hardware setup. Good amount of hard disk space.
4GB RAM Memory. Running 4 processors. No other service is running apart from
SQL Server. Right now nobody is accessing the server.
How long it will take to restore this backupset?. This is urgent please.
Any help would be appreciated.
tks in advance,
Sri
View 2 Replies
View Related
Feb 27, 2014
I have created the file group for my database.First i took backup of individual file group(mdf and ndf) then I tried to restore only secondary(ndf) file group.I got error like
Restore failed for Server 'pcnameSQLEXPRESS'. (Microsoft.SqlServer.SmoExtended)
File 'regSQL_dat' was not backed up in file 1 on device 'D:vtndf.bak'. The file cannot be restored from this backup set.
RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3144)
When i tried to restore only primary file group i got the same error.
Can i restore individual file group? I
For the purpose of data archiveng,i have taken back up of ndf file (it contains very old data) & i have removed this file from database.Now my customer asking these file data.Now i have to again attach/restore this ndf file.how to attach/restore.
View 1 Replies
View Related
Sep 23, 2014
Been asked to restore an orphaned MDF file leftover after a botched uninstall - no .bak file. Tried to reattach, but got an error, I don't think it had been detached. My initial answer was, "No, very likely can't be done".
Am I right? Or is there a way of attaching it that doesn't require it to have been detached?
View 4 Replies
View Related
May 15, 2015
I am trying to restore a database called BCC_DB (I'm actually just needing one table opened to find some data in one column) so I created a blank database called BCCrestore.
I have a .bak file called BCC_DB_backup_201505020017.bak.
I placed it in my local drive C:BCC_DB_backup_201505020017.bak and tried the SQL:
RESTORE DATABASE BCCrestore FROM DISK = 'C:BCC_DB_backup_201505020017.bak'
GO
I get an error:
Msg 3201, Level 16, State 2, Line 1
Cannot open backup device 'C:BCC_DB_backup_201505020017.bak'. Operating system error 2(The system cannot find the file specified.).
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
View 9 Replies
View Related
Mar 7, 2008
Hello,
I have just installed sql server 2005 in a windows server 2003 server.
i tried to create a new database from a backup file. after selecting the backup to restore i got the net message.
Restore failed for Server '<ServerName>'. (Microsoft.SqlServer.Smo)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: Directory lookup for the file'<D:file name.mdf>'. failled with Operating system error 2(The system cannot find the file specified.). (Microsoft.SqlServer.Smo)
i found some information about and it says that it has something to do with the sql writer service i tryed stopping the service but i could not restore the db.
any recomendations to restore this database.
thank's
Michael
View 1 Replies
View Related
Oct 23, 2006
Is it possible to restore SQL2000 backup to SQL2005? Or I have to restore the DB to SQL2000 and then upgrade it to SQL2005?
Can someone provide me ways to upgrade SQL2000 DB to SQL2005?
Thanks,
Hiten
View 5 Replies
View Related
