Hello,
Is it possible to restore a SQL 2000 backup with Binary Order collation to a new SQL 2005 installation with Dictionary order, case-insensitive. Is this something I can do during the restore process or would I need to change it after?
Thanks in advance,
Buster
Hello, dear Friends!
My situation is a following:
I have some not big databases with only English data and some conteining data in Hebrew.
My question is: May I manage two collation types- meaning the database collation type will be for example some kind of Latin and some databases' collation will be in Hebrew.
If you have any experience of managing DB's in two absolutely different languages (Japanesse, Russian, Chinesse, Arabic with English) please tell me about it.
Best regards.
Marina.:rolleyes:
Hi. Wondered if I might get a bit of advice on a minor collation problem I've experienced after migrating a database form SQL Server 2000 to 2005?
Users reported an error appearing in pages in a web-based application and I traced the problem to a stored procedure that was using a temporary table. I retained the original collation - SQL_Latin1_General_CP1_CI_AS - after migration and the error showing up was 'Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.' This makes sense as I guess temporary tables are assuming tempdb's collation. Resolution in this case was fairly simple, which was to apply an explicit collation to one of the columns in the temporary table (it only had three columns, only one requiring the collation). However the longer-term question is should I: (a) resolve similar issues in the same way as and when they arise; (b) change the collation of the migrated database to that of the default for system and new databases under 2005 - i.e. Latin1_General_CI_AS; or (b) change the collation of tempdb and the other system databases to match that of the migrated databases (sounds risky)?
I would probably go for (a) or perhaps (b) but could use some expert advise on the matter.
Regards,
YaHozna.
Hi.
I had an SQL 2000 database with Turkish collation. (Note: Default database collation was Latin)
Today i transfered data from that to SQL 2005 with Latin collation.
There is no problem with old data. I transfered them correctly. But when i insert/update at new database, Turkish characters change to Latin. (Like i->i, g->g)
When i put an N before the value, it works.
For example INSERT INTO T1 (A) VALUES (N'A')
Must i put N to all of them? I think not. What can be the solution?
Note: Database for Snitz Forums like here.
Hi there,Trying to work with SQL2005 with Hebrew characters. If i use the Unicode character data types do i need to change the database collation???. regards
View 5 Replies View RelatedHello,
I'm having an issue with stored procedures after restoring a db from 2000 -> 2005.
If any stored procedures isnt owned by dbo (eg tomsqluser.updateItems rather than dbo.updateItems) then it just wont work and Studio Management Server doesnt give the permission to change it to dbo.
Is there any way around this after restoring?
hi there,
I've got a problem while restoring a DB from sql server 2005 to sql server 2000 I always got an error message 3169.
Please I want if it's possible to make it, it urgent.
Thanks in advance
Hi Guys,
I have two servers at my site out of which one is our production server (on SQL 2000) and the other being a reporting server (SQL 2005). Now the question i have are the following..
Q1) Can i restore an hourly differential backup of my SQL 2000 to SQL 2005?
Q2) If yes, are there any specific way i need to go about it other than the conventional Restore with NoRecovery option?
Q3) If the answer is no to Q1, then is there any 3rd party software that does this(restoring differentials from 2000 to 2005)?
I had tried this once some time back and at that time it failed to keep the database in a state(norecovery) where in it would accept timely differential db restoration.
Appreciate your help
sk
Hello,
View 7 Replies View RelatedI did a backup of a SQL2000 database (named Winstis) using the 2005 management studio. I then created a blank database on my 2005 instance (named Winstis). I then tried to do a database restore to the new 2005 database. I got an error:
System.Data.SqlClient.SqlError: The backup set holds a backup of a database other than the existing 'Winstis' database. (Microsoft.SqlServer.Smo)
I even tried the option to Overwrite Existing database and I got a different error:
System.Data.SqlClient.SqlError: The operating system returned the error '32(The process cannot access the file because it is being used by another process.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'D:Program FilesMicrosoft SQL ServerMSSQLData est.ldf'. (Microsoft.SqlServer.Smo)
Also the 2005 instance database is on C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataWinstis_Data.mdf
and the 2000 instance is on
D:Program FilesMicrosoft SQL ServerMSSQLDataWinstis_Data.mdf
How can I accomplish getting the database from 2000 to 2005 with all tables, store procedures, and functions?
I would like to know if it is possible to make a backup of a database in a SQL Server 2005 server and restoring it in a SQL Server 2000 server.
Thanks a lot in advanced.
Hi all,
We are experiencing major performance issues after restoring SQL Server 2000 db into newly setup hardware environment. The application is faster on another environemnt running on Windows 2000 server with SQL Server 2000.
We have replicated exact same hardware setup, but only fifference is we are running latest version windows server (2003) and latest version of SQL Server (2005). So far we have troubleshooted the bottleneck to be one of the trigger that is inserting data into a table in one of the stored procedures. The same SP takes 9 mins to execute whereas on our env it takes around one hour. If I disable the trigger it executes in 2 minutes.
After restoring, we have executed
exec sp_updatestats
DBCC UPDATEUSAGE
DBCC DBREINDEX all tables
Set Compatibility level to SQL SERVER 2005 (90).
Now we are installing latest Service Pack for both OS and SQL Server.
Any ideas?
Your help is appreciated.
Hello,
I tried to restore a database which I backuped from MS SQL 2000 to SQL Express 2005 but it always failed with the following error message. What could be the problem?
Restore failed for Server 'SERVSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
Additional information
System.Data.SqlClient.SqlError: The backup set holds a backup of a database other than the existing 'gtp' database.
(Microsoft.SqlServer.Express.Smo)
Thanks
Hello,
I've restored a SQL Server 2000 database with a Latin1_General_BIN collation from a .dmp file to a SQL Server 2005 server with a default collation of SQL_Latin1_General_CP1_CI_AS. When I try to change the database collation I get hundreds of the following error:
The object 'CK_PM10200_GLPOSTD_00AF8CF' is dependent on database collation. So, in this case, is it even possible to change the collation if there are objects in the database that are dependent on it?
Thanks,
Bruce
Hi all,I'm having a problem restoring backup from 2000 to 2005. The actualrestore process went ok. However, the database user of the restoreddatabase is missing a Login Name. I've made sure that the Login Nameis created in 2005. Also tried deleting the user, but couldn't theuser is db owner. Is there any way that I can assign a Login Name forthis database user or maybe drop this user and assign another one?Regards,Gerd
View 2 Replies View RelatedHi,
I have a database that is in the SQL Server 2000 compatability mode on my SQL 2005 server. I am trying to restore a backup of this database on my SQL Server 2000 database on another server and keep getting strange messages. First trying Red-Gate and then plain SQL Server with no luck.
It seems as I remember that the 7.0 and 2000 compatibility issue between backups did not arise when the compatibility mode was set to 7.0.
Is this "planned" behavior or an "undocumented feature"??? Anyone else have success doing this?
Thanks,
John Campbell
Hi All,
I was trying to restore MSDE 2000 database to SQL 20005 EE and I got stuck with the following error:
System.Data.SqlClient.SqlError: RESTORE detected an error on page (xxxx:xxxxxx) in database 'testdb' as read from the backup set.
Do you think some pages are corrupt from the db or the backup set?
Has anybody come across this? Any ideas to resolve this error?
Thanks,
Siva.
We have a set of databases some are fully read-only others have read-only file groups, is there any way to restore backups of these taken on an MSDE 2000 to an SQL Express 2005 instance?
When doing the inplace upgrade we change these to read-write before the upgrade and set them back after the upgrade.
These databases are used in the field by customers althought the controlled upgrade requires a backup before (and blocks if it fails) and tries a backup after if the post upgrade backup fails (due to disk space) we might need to recover from this odd situation.
The only solution I have is install MSDE some place restore to this then do the controlled upgrade again, any other ideas?
Hi all.
I don't know if this is the right forum to post this question, but here it goes.
We have restored into sql 2005 the database backups made in sql 2000. We connect with trusted connection and application roles, and when trying to execute a transaction to another database (with the guest user), we get a permission error.
Does anyone know if, apart from restoring the databases, we should do something else to get the guest user working the same way as with sql 2000 in the restored databases?
Thanks in advance for your help.
Scenario
Recently moved a SQL2000 database to SQL2005.
Collation on SQL 2000 database server was SQL_Latin1_General_CP1_CI_AS
Colaltion on SQL 2005 database server is Latin1_General_CI_AS
After restoring the SQL 2000 database on SQL 2005 we observed that the database collation was SQL_Latin1_General_CP1_CI_AS. We have altered the database collation to Latin1_General_CI_AS. We understand this will work for all new objects created on the database but existing objects (prior to the collation change) will continue to have the 'SQL_Latin1_General_CP1_CI_AS' collation.
What is the best method to change the collation of the older columns to 'Latin1_General_CI_AS' -
1) Run ALTER TABLE ALTER COLUMN <colname> <datatype> COLLATE Latin1_General_CI_AS <nullability>
on each varchar/char column
or
2) For each table
BCP out data
DROP TABLE
RECREATE TABLE (taking the new collation Latin1_General_CI_AS)
BCP in data
3) Other methods?
Thanks in advance
David.
As I said in the subject I've a problem trying to restore a backup of a previous db created in sql 2000 server
When I try to do it I recive the following message:
____________________________________________________________________________________
System.Data.SqlClient.SqlError: Il set di backup include il backup di un database diverso dal database 'musica2007' esistente. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&LinkId=20476
------------------------------
Program Location:
in Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages)
in Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries)
in Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
____________________________________________________________________________________
What should I do? What's the probem? I've already tried to look for the solution in other messages but I didn't find anything..... Thanks for help,,, by Luke
Hey guys
We currenlty have SQL Server 2000 installed inhouse for testing. A client has given us a backup of their 2005 database and i'm wondering if the restore will work into 2000, or any issues i should be aware of. Should i just install msde locally on my machine and restore the database?
thanks
Hi
What is the default collation SQL 2000 Server takes during installation on Windows 2000?
Can it be chosen during installtion of SQL 2000 or does it depend on my regional options and according them the SQL 2000 server default collation will be selected?
Why can it happen that the user datebases have collation Latin1_General_CI_AS and the tempdb has collation SQL_Latin1_General_CP1_CI_AS?
I ran into problems as temporary data had to be compared residing in temp db's on tempdb and the result was a collation conflict!
In the BOL it says:
"When you install an instance of SQL Server, you can specify the default collation for that instance during setup"
but I had no window or dialog during installation of SQL2000 Personal Edition where I could select the collation.
How can I change default collation of SQL 2000 Server?
Anyone has some more informations?
Thanks
mipo
I need to migrate an application from SQL 7.0 to SQL 2000. I knowthat they use different collations, and this causes problems when7.0 applications are moved to 2000. I would like to find apermanent fix (so I'm not happy with using "COLLATE" in futurestored procedures) and I'd like to keep the default 2000 collation(Latin1_General_CI_AS) in order to avoid problems if theapplication needs to be moved to another 2000 server in the future.So the only option is to change the collation of the restored DB.What is the most efficient way of doing this?Thanks,Marco
View 2 Replies View RelatedHi.
I don't know how to change the collation in SQL Server 2000, my collation is Modern_Spanish_CI_AS, if somedoby knows the procedure to change the collation I would be thankful.
Thank you again and best regards.
Christian
hi all,
I need to select collation settings to support chinese characters. As i came to know that i need to select 950 character set. But problem is that i am not able to find the option for chinese characters i.e, 950 character set in the collation settings of the setup. It will be helpful if anyone could suggest me if there is any other option to set while set up or in an existing sql server instance to support chinese character data.
Thanks in advance,
sekhar
I having one problems regarding to database collation settings issue.
Scenario: i have image file named as "řřřřřř.jpg" and save as attachment inside document. But once after saved and reopen that document, that filename become "øøøøøø.jpg". This is causing RTE issue when i want to sending it through email. So, could anyone here help me on these issue? Thanks
Environment:
OS = Windows XP
Database = MSSQL 2000, Collation=SQL_Latin1_General_CP1_CI_AS
Default input language = Slovak, keyboard=Czech
I am trying to change the "Server collation" for the all SQL 2000 server without uninstall SQL Server 2000 and reinstall it.
Is there any way for it or not. Thanks.
Hello...
When I migrated data from one SQL Server to another I got collection problems because collation of the target server was different from the source one.
The best solution I thought about was to change collation of the database in target server to be equal to the server collation so that when a temporary table is created, and the collation used would be the server collation, no error would occur. All sounds logic, but, after I ran ALTER DATABASE command and changed the collation of the database, I verified that all varchar fields of all database tables retained the old collation, not the new database collation I set.
Is there any way to change the collation of all fields at once when I change the database collation?
Thanks for your help
Jaime
Hi,
Can anybody give me some information on Table data types of SQL2K.
How and where can it be used. Does it make the queries faster, in case there are many users using ?
Please could anybody give me these details, to make me decide whether I can use it or not ?
Thanx and Regards,
Sushma
Hi,Can anybody tell me if it is possible to return a table data type (asopposed to a temporary table) from a stored procedure.I am currently studying for 70-229 using the Thomas Moore book but itdoesn't really make it clear, as the text suggests you can't returnthem but some of his sample questions suggest you can.I can't make it work in Query Analyser so I am assuming that you can'treturn them. Is that correct?Thanks in advance for any help,Simon.
View 1 Replies View RelatedHi,I am working in a sql server 2000 environment but my customer uses sql server 7. Is it possible to use backup and restore to transfer the database or should I set up a sql server 7 for development?The database only contains tables and views...ThanksKoen
View 1 Replies View RelatedWhen I restore some one elses database in SQL 2000 I get an error
[Microsoft SQL - DMP ( odbc state:42000)]
An internal consistency error occured, Contact technical support RESTORE DATABASE is terminating abnormally
at first I thought it was the sort order and collation, but now I have the same and I still get this error.
Does anyone have any ideas or atleast point me in the right direction.