Does anyone know if it is at all possible to restore a single database from tape if no backup jobs have been ran or setup for this database. However, the server itself has been backuped to tape. So I would like to restore this database from the server tape backup. If so, how do I accomplish this?
View 1 RepliesI have inherited a SQLS erver 2000 instance where the client neverimplemented a backup startegy for the "master" and "msdb" databases.MSDB is now showing errors and my only option for a restore is from atape backup of the server.Any thoughts..
View 1 Replies View Related
Hello,
I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.
I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task scheduler on the server before the disaster recovery.
However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task scheduler and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.
----------------------------------------------------------------
Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
----------------------------------------------------------------------
My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.
Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.
I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.
This is some kind of issue with SQL Server Express being restored by tape backup.
Any suggestions, thanks.
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
Any advice on how to get this thing finished out?
I am trying to backup a database to tape. I'm using Microsoft SQL Server 2000 Enterprise Edition.
When I try to do the backup using Enterprise Manager I see the following message:
Microsoft SQL-DMO (ODBC SQLState: 42000)
Cannot open backup device '\.Tape0'. Device error or device off-line. See the SQL Server error log for more details.
BACKUP DATABASE is terminating abnormally.
In the Event Viewer is logged the following message:
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(2)
Event ID:17055
Date:14/1/2004
Time:10:29:20
User:N/A
Computer:MySQLName
Description:
18204 :
BackupTapeFile::OpenMedia: Backup device '\.Tape0' failed to open. Operating system error = 5(Access is denied.).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I can do the backup to disk normally, but I need to do to tape.
Please, help me to solve this issue.
Hi, I back up SQL Server 2000 and SQL server 2005 databases to hard disk using the SQL Server Backup Wizard and maintenance plans. Then, I copy the resulting backups to tape using third party tape backup software and compression by the backup software and hardware. I do not use the SQL Server Agent available for the third party backup software. Is this acceptable, or does the compression performed by the third party backup system introduce opportunities for database corruption or other negative effects?
Thanks
Dear sir/madam,
I am from NTU, Singapore and we have a windows 2003 server edition installed on a DELL server and it also runs MS SQL server 2000 for a project of ours. We have installed a HP tape drive on the dell server and it works fine if ntbackup is used at the command prompt but then the SQL enterprise manager does not recognize the tape drive and backing up of our database is of high priority as it contains sensitive information. But the tape drive is installed properly as the device manager does not show any error and ntbackup also recognizes it. I cant seem to figure out why SQL server 2000 cannot recognize it. It would be very helpful if you could kindly guide me on this issue.
Thanking you
Regards
Lavanya Janardhanan
I backup the database into tape0 using management studio and can see the contents in the backup media.
However when I tried to restore, the error "timeout expired" appears and sometimes together with the error "restore headeronly is terminated abnormally".
Please advice and thank you in advance!
Below is the error message:
===================================
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteWithResults(String sqlCommand)
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteWithResults(String query)
at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSqlWithResults(Server server, String cmd)
at Microsoft.SqlServer.Management.Smo.Restore.ReadBackupHeader(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseGeneral.buttonSelectDevice_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
===================================
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (.Net SqlClient Data Provider)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
------------------------------
Server Name: NTSRV1
Error Number: -2
Severity: 11
State: 0
------------------------------
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected)
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteWithResults(String sqlCommand)
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
I have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.
If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:
Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).
It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.
Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.
I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.
ThanksTim
1) We have got the database dump (.bak) file in one machine and we need to restore this to another machine where the SQL server (version 7) is running. But in the restore option there is no way to choose any mapped or shared drives in remote machine. Any pointer to resolve this problem?
2) Can you set up a database if you have the .mdf and .ldf files?
I am running SQL 7 on two seperate NT4 servers, a production server and a standby server. Both servers are configured for Mixed Mode authentication. If I back up a database on the production server, do I also need to back up the master database and restore it. My reasoning behind this is that users' login details will be held in the sysxlogins tbl in the master, while their access rights will be held in the sysusers tbl in the database I am backing up and restoring. If I back up and restore a database without backing up and restoring the master db as well, will the connection between the system login and the database user be broken.
Any comments/suggestions would be appreciated.
Hi there...
can any one help in following situation.
Suppose in a network I have two sql server ABC and XYZ and XXX (NT server) on same sub net.
1) I take a backup from server ABC on XXX (NT).(ie.. backup on network)
2) Can I restore database in XYZ which was backed up by ABC? How???
3) Suppose My ABC machines fails and I have to again install SQL Server 7 on it, will I be able to restore database from XXX(NT)? how???
regards,
zak
Currently have large database in three devices, named Cabinet cab2 and cab3. Cab3 device has been expanded twice. We are upgrading the hardware and would like to get the database into one device named cabinet and clean the mess up our vendor initially created for us. Any Ideas/steps on how this could be accomplished??? TKS Jerry
View 2 Replies View RelatedUsing SQL 7.0, has anyone backed up a database and restored on to a different database without the device files being moved around.
For example, With SQL 6.5 we used to backup PROD (source) database and restore to TRAIN (target) database. It worked just great regardless whether the databases are located on the same drive or not. We loved it and used it to refresh TRAIN from PROD on a weekly basis.(using sql Enterprise Mgr)
However, in SQL 7.0 when we attempt this procedure the database and log files of the TRAIN (target) are getting relocated to the drive location of PROD (source) database. Very strange.
Though thru object transfer i.e. import ,we can import data from PROD(source)
to TRAIN (target) database, but it is very slow and takes lot of time and performance degrades for source database (PROD)
Any input on above will be appreciated if backup / restore thru
enterprise mgr or TSQL procedure works in SQL 7.0 for restoring another database which is also on different drive i.e PROD (source) database on
drive C and TRIAN (target) database on drive E.
Thanks
Rajiv
While this may be in the wrong forum, I thought that I should try here first.
One of the developers that works for this company would like to restore a sample database to the SQL server after installing our software.
Is there a command line command that can be issued to restore/create a database with a file (.bak) of an SQL database (sample)? If this can't be done, can it be done with VBScript or something similar?
SQL is not my strong point, and neither is development. Any help would be appreciated.
TIA.
Joe
Hi,
Two of my hard drives went down yesterday. and with it went the Sql server database.The data recovery guys recovered the back up database (.bak) file.I have since reinstalled SQL Server 2000 and now when i try and restore the .bak file it says the Microsoft tape back up file set is not valid when i try and open the .bak file.
Whats the right way to add my databse to the SQl Server2000 using my .bak file and if anyone has come across the error they could help.
Thanks
L
hey...
when i try to restore my database... they gave an error. the database is still in use.. is there a way to kill all the connections to that database ?
Hi,
A while back, I used SQL Server 2000 to back up a database. Now, I am wondering if there is a way to restore this backup into a SQL Server 2005 environment as I no longer use SQL Server 2000?
Thank you
Hi all,
Our Application is made to work with different database. I have a few query
1. There is option of restoring for only table, the tables can be mention during runtime, how to acheive same in sql
2. During restoring if already same data exists, it throws an exception , based on the exception we display the message data already exist. In sql any option is available to check the data exist or not
3. Can sql create the column during runtime.
Thanks
theres two .mdf files
game_log.mdf
game_data.mdf
is there a way to restore a database with these files but not with .bak (backup) files? i couldn't connect to database so i reinstalled sql server 2000 and this time i could connect to the sql server fine but when i tried to restore the database, it wouldn't work when i set it to transcation log and it shows an error
The preceding restore operation did not specify WITH RECOVERY or WITH STANDBY. Restart the restore sequence, specifying WITH NORECOVERY or WITH STANDBY for all but the final step. RESTORE LOG is terminating abnormally.
please help, thank you
Hello,due to some testing my SQL Server crashed. I have to reinstall it and ...For now I only have .mdf file and nothing else. My question is: is there anypossibility to restore this .mdf file for SQL 2000? I have some useful datain this file and there will be nice to use it.Best RegardsMarciN
View 2 Replies View RelatedIs there a way to restore a database backup file to the default data directory in a specific SQL 2005 instance using T-SQL?
I know that you can use the command RESTORE DATABASE, but that will restore the database files back to it original location. I also know that I can use the WITH MOVE option also, but is there a keyword or some special notation that I can use to make sure that the data/log files are moved to the default data directory for a specific SQL 2005 instance?
I am trying to avoid cases where the original file location does not exists in the current file system.
Thanks in advance,
Rodney
i was using mssql 2000
how can i restore my database on another server without affecting the data stored on that server,
or
would there be a wizard where i can compose a query of the design of the whole database and run those on another server to update its structure
Hi everyone,
I made a backup for my Bilgiler database and then by relying on this back up, I erased my Bilgiler data base. so now I tried to restore this Bilgiler database by using Enterprise Manager however I could not succeed.
How can I overcome this ?
Thanks
Hello,
I am taking the error message which is in the below side,while restoring a database.(I am using sql server 2005)
The backup set holds a backup of a database other than the existing 'db1' database. (db1 is the database name.)
Can you help me?
Hi
I have a .db file from another server and i am trying to install it at home and get this lengthy error message ( 9 lines long )
Microsoft SQL-DMO ODBC SQL STATE 42000
The physical name ( path blah blah may be wrong)
how do i change the physical path of the .db file i'm trying to restore??
thx
Hi there,
I am using VWD and have my production website hosted elsewhere. The hosting company provides a backup service that allows me to download a something.bak file as the backup of my website. My query is: how to export or copy the data in the something.bak file into the database on my own computer? Can anyone helps please?
Thanks in advance.
m able to take backup and restore the database through gui. Backup is comming with backup query, but using restore query m unable to restore database.It is giving exception is REstore failed for server.what it means ? what is the solution for this?
View 1 Replies View RelatedWhen I restore some one elses database in SQL 2000 I get an error
[Microsoft SQL - DMP ( odbc state:42000)]
An internal consistency error occured, Contact technical support RESTORE DATABASE is terminating abnormally
at first I thought it was the sort order and collation, but now I have the same and I still get this error.
Does anyone have any ideas or atleast point me in the right direction.
Hai,
We are using sql server 7.0 for developing our applications.Recently we formated the disk and.But before doing so i just backed up the database(full backup using EM) alone.Then i restored the database after reinstalling sql server.All the objects are restored except the logins.So how to restore the logins.
I cannot create logins of same name and getting an error saying that the login already exists.
Thanks in advance.
Regards
K.Saravanan
I have two servers (same config) I am trying to restore a database that I backed up on one server to the other. The method I used was as follows: I backed up the database to disk.
Copied to the Disk of the second server.
When I try to restore I get the following message.
"The backup set holds a backup of a database other than the existing "database name" database.
What am I doing wrong?