I am restoring a backup from SQL2000 Database to 2005 and I get this error :
An exception occured while executing a Transact-SQL statement or batch
(Microsoft.SqlServer.ConnectionInfo)
Additional Information: Too many backup devices specified fro backup or restore; only 64 are allowed.
RESTORE HEADEEONLY is terminationg abnormally. (Microsoft SQL Server, Error 3205)
How do fix this? Please assist.
Thanx
Is it possible to restore SQL2000 backup to SQL2005? Or I have to restore the DB to SQL2000 and then upgrade it to SQL2005?
Can someone provide me ways to upgrade SQL2000 DB to SQL2005?
Thanks,
Hiten
Hey all,
Just went through migrating to SQL 2005 as well and we have a need to apply log shipping between SQL 2000 and SQL 2005. Well not shipping per say in the automated fashion that SQL 2005 offers but rather we need to apply SQL 2000 transaction logs to a SQL 2005 instance. Though the database is still in SQL 2000 version 80 and the secondary database needs to be available in read only. (STANDBY MODE)
When I attempt to restore either a FULL backup or transaction log I get the error:
RESTORE DATABASE is terminating abnormally. This backup cannot be restored using WITH STANDBY because a database upgrade is needed. Reissue the RESTORE without WITH STANDBY
The only way I could restore the FULL was by using the WITH RECOVERY OR NORECOVERY option during the restore process. The issue with this is I need the database in standby by mode in order to continue to append transaction logs.
Anybody have any thoughts how I might be able to get around this?
Thanks
Eric
If I restore a SQL 2000 DB into 2005 it upgrades it for me.
When restoring a DB to a new server/instance of SQL, in SQL 2000 I had to carry out the sp_changedbowner procedure after the restore was complete.
Is the equivalent procedure when restoring a SQL 2000 DB to 2005 to go to the schema for the restored database, find the schema with the name of the SQL 2000 db owner and change the schema owner?
OR alternatively run the following query where mark is the db owner in 2000 and lladmin in the new user in 2005 ;
ALTER AUTHORIZATION ON SCHEMA::mark TO lladmin;
GO
hi,
i have six files ( 3 MDF and 3 LDF) from a backup of a MS SQL 2000 server.
I installed MS SQL 2005 and wanted to Restore these Dataset. but they cant be accessed. doesnt SQL 2005 support these files ?
How can i use these files to access them with SQL 2005 ?
Thx,
I have a SQL backup that I created on SQL 2005 but need to restore it on a SQL 8.0 SP4 installation. I receive an error when I try to restore it. The error is :
Error 3169: The backed up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database. RESTORE FILELIST is terminating abnormally.
Any ideas?
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
I just upgraded my SQL 2000 server to SQL2005. I forked out all that money, and now it takes 4~5 seconds for a webpage to load. You can see for yourself. It's pathetic. When I ran SQL2000, i was getting instant results on any webpage. I can't find any tool to optimize the tables or databases. And when I used caused SQL Server to use 100% cpu and 500+MB of ram. I can't have this.Can anyone give me some tips as to why SQL 2005 is so slow?
View 3 Replies View Relatedi have sql2000 & sql2005 on the same machine. I am unable to register my localhost in sql2000, get an access denied error. How can I make my localhost use sql2000 database?
View 1 Replies View Relatedhi
i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
pls some one can help me ???
thanks
chaus
Hi all,
I just wonder can we install both sql2000 & sql2005
into one server, any problems?
thanks for advice.
I have two SQL servers setup; A - SQL 2005, and B - SQL 2000.
I would like to create an account on Server A which has access to the results from one view via a linked server on Server B. I don't want the user on Server A to be able to access any databases, tables or even columns on Server B with the exception of those contained within this view.
Is this possible, and how would I go about doing it? (Permission-wise)
I have just loaded SQL2005(server only)on my production box.
This box also is running SQL2000.
When I install the SQL2005 SP2 it says that if services are locked they will cause a reboot. I stop all the SQL 2005 services but it also want to stop SQL2000 Server for "backward compatiblilty".
I thought installing a separate instance of SQL2005 would not have any effect on my SQL2000 instance.
Thanks for your help
R/P
Hello all
I have an odd problem with sql 2005. I'm a long time sql 2000 user trying to migrate to 2005. My company uses CSVs to import data from our clients db into our SQL db. In 2000 I just create a txt source and pick whichever CSV and transform to a temp sql table. This has always worked just fine with no problems.
So we have a new server with sql 2005 installed. I go through the "migrate dts 2000" wizard and pull in all my DTSs from sql 2000. The first thing I see that needs to be fixed is "connection 1" which is my CSV connection manager along with the flat file source.
I went through both the connection and the flat file source and tried to copy exactly what I do in sql 2000. When I preview the data or even execute this package I get bad data.
Here is what my CSV looks like:
"ACCT ","ACCOUNT DESCRIPTION ","ACCT TYPE","SCH NO","SC"
"9999Z","Balance By Source Offset",9
"87B","UTILITIES(NOT PHONE)U-C",7
72,"ADM-LEGAL/AUDIT/COLL EXP",7
315,"SALES TAX - VEHICLES LOCAL 1",3
"90A","INTEREST(NON FPLAN/MORT)/N-C",7
73,"MEALS & ENTERTAINMENT-ALL",7
"210A","REBATES RECEIVABLE",2,17,4
"5A@","# OF EXT WARR SALES-UC",10
"51N","N/C-VEHICLE INV MAINTENANCE",7
"87D","UTILITIES(NOT PHONE)SVC",7
"90B","INTEREST(NON FPLAN/MORT)U-C",7
317,"ACCRUED OTHER",3,75,4
This is what it looks like when I preview it inside the flat file connection manager:
ACCT ACCT DESC ACCT TYPE SCH NO SCTYPE
9999z blance by source... 9– – "87B" UTILITIES(NO... 7
So it is basically putting two rows of csv data into one row of SQL data. Now I realize my CSV isn't in the correct format because it doesn't have the extra commas at the end of a row IF the columns are null. It seems that 2005 doesn't recognize the carriage return/line feed. It puts the actual ascii characters in the preview. Once I execute the package it changes the ascii characters into blank spaces. My big issue is, why did this work just fine in 2000 but I can't get clean data in 2005? I'm completely clueless now, I have no idea where to go with this. Its impossible to change the output of the CSVs I get. There is literally no other options. I kinda get what I get with them. Why is this happening?
Any one knows if I can restore a SQL2000 database backup file on SQL2005? and the DB structure will be upgraded?
Many thanks.
Hi,
Can a sever with OS win2003 install both sql2000 & sql2005? is there any problems with 2 differenct versions in one sever.
Thank you. :)
I have installed MSDE2000 (name: mypcsql2000, port 1433) and sql2005 Express (mypcsql2005, port 1434) on my WinXP.
I'm developing some application and I need to test both server.
It has worked fine about 1 year, but last month i got error message.
When i'm trying to connect to SQL2005 from my application or import data from Excel, i get error message:
[DBNETLIB][ConnectionOpen (Invalid Connection()).]Invalid connection.
I can access SQL2005 with Management Studio or cmd line (sqlcmd). But not with Excel (or with my application).
MSDE2000 works fine, i haven't any problems.
Last weekend I have reinstalled my WinXP and also MSDE2000, SQL2005 Express.
Worked fine, but when turn on automatic updates ON and afterwards installed latest updates, the problem is here again...
Any idea to solve this problem?
(sorry for my english...)
Hi,
Is there any difficulties I should be aware of? I'm not running DTS and I think my DB is relatively simple. I've googled and not found anything that sticks out as a problem.
We are getting a new server because we want more RAM, and better upgrade options. The hosting company recommended 64bit SQL, so I am thinking of following their recommendations.
I am upgrading from a 2 x p4 2.8ghz xeons to 1 x Intel 5130 dual core 64 bit chip. I also will be going from 2 gigs to 4 gigs of RAM.
Any thoughts I would love to hear.
Thanks!
Hello!!
we use SQL2000(64bit) and we are considering our system to apply SQL2005
so i tested two SQL-Server on One Machine by installing each instance of them.
The RESULT..
i can't find difference of performance between two instance.
is there no impoving in Database engine?
* i'm sorry, for my poor sentence...
I am a IT Manager.I have question:
There is a database was created on SQL Server.
I want to learn if I restore the database to SQL 2005 then I want to get backup then I want to restore to SQL 2000.
shortly: SQL 2000 sever-> SQL 2005->SQL 2000 SERVER
Can I do that?
If I do that is there someting missed?
http://www.narcv.com/
I have a distributor setup on SQL Server 2005 (9.0.3042) and am trying to create a publication on SQL Server 2000 (8.0.2040) which receives the following error in my production environment:
Msg 8526, Level 16, State 2, Procedure sp_addpublication, Line 802
Cannot go remote while the session is enlisted in a distributed transaction that has an active savepoint.
The interesting part of this equation is that I was able to get this to work without error in my DEV (development) environment and well as my QAT (test) environment. This end result was that my distributor was SQL 2005, my publisher was SQL 2000 and my pull subscriber was SQL 2005. I have been diligently comparing our production environment to my other environment and have yet to find differences.
Has anyone else seen an error similiar to this? Any insight would be appreciated.
Thanks in advance,
Max
Hi,
I need to install SQL2000 onto a machine (W2K3 R2, SP2) that already has SQL2005, SP1 running. I can't disturb the SQL2005 installation.
Are there any problems or pitfalls to avoid? I've googled and looked on Technet but not yet found an answer.
Has anyone done this?
I know that if I install a separate instance of SQL2000 alongside a default installation of SQL2000 then I'll get a totally separate installation which won't affect the other one at all, so I reckon it could be done. But I have to be sure before I start!
Thanks in advance,
Steve
Hi,
We have two systems, one working on SQL2000 and other working on SQL2005. In SQL2000, there is JOB which needs to execute a JOB in SQL2005, get feedback based (success or failure) and proceed accordingly.
I am not sure the best practice to call SQL2005 job from SQL2000 job. Both the server's run undersame domain account.
please help, thanks
atul
Hello,
Restoring a DB from sql 2005 (which is located on my local computer) into sql 2000 (which is located on the server) and I am getting this type of message:
TITLE: Microsoft SQL Server Enterprise Edition
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Too many backup devices specified for backup or restore; only 64 are allowed.
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3205)
Hi,
I'm running a VB6 app with MDAC 2.8 on Windows Server 2003 SP1.
I create an ADO recordset with a SELECT statement which returns an empty recordset.
I then add 2 new records to it with AddNew and later perform an UpdateBatch.
Before the SQL upgrade it worked fine but now errors with:
'Cannot convert a char value to money. The char value has incorrect syntax.'
I did a SQL Trace to find out what the Updatebatch was actualling sending to SQL (listed below).
This works fine when I run it on Query Analyser using SQL 2000 but fails on SQL 2005.
I worked out the problem is linked to the columns NewValue and OldValue both are varchar 70.
The first insert has them defined varchar(7) and varchar(1). This insert succeeds, but the second insert has the columns defined as varchar(18) and varchar(12). This one fails (unless they only contains numbers!).
I'm confused.
I've read that sp_executesql has changed for SQL2005.
Any ideas anyone?
Thanks
Howard
Code Snippet
exec sp_executesql N'INSERT INTO "pit1_lamda".."Planalt"
("ElNo","Item","MvmtDate","NewValue","OldValue","PlanAltId","PlanNo","Timestamp","User_Id","RBNo","CreatorId","CreatorTypeCode","CreatedDate","ExitNo","PBTxnTriggerId","PremHistNo","RegContractPremium","WaiverPrem","SinglePremTot","PlanMvtId","SingMvtID","PLFAID","TrancheId")
VALUES (@P1,@P2,@P3,@P4,@P5,@P6,@P7,@P8,@P9,@P10,@P11,@P12,@P13,@P14,@P15,@P16,@P17,@P18,@P19,@P20,@P21,@P22,@P23); INSERT INTO
"pit1_lamda".."Planalt"
("ElNo","Item","MvmtDate","NewValue","OldValue","PlanAltId","PlanNo","Timestamp","User_Id","RBNo","CreatorId","CreatorTypeCode","CreatedDate","ExitNo","PBTxnTriggerId","PremHistNo","RegContractPremium","WaiverPrem","SinglePremTot","PlanMvtId","SingMvtID","PLFAID","TrancheId")
VALUES (@P24,@P25,@P26,@P27,@P28,@P29,@P30,@P31,@P32,@P33,@P34,@P35,@P36,@P37,@P38,@P39,@P40,@P41,@P42,@P43,@P44,@P45,@P46)',N'
@P1 varchar(6),@P2 int,@P3 datetime,@P4 varchar(7),@P5 varchar(1),@P6 int,@P7 varchar(12),@P8 int,@P9 varchar(8),@P10 varchar(4),@P11
varchar(12),@P12 tinyint,@P13 datetime,@P14 int,@P15 int,@P16 int,@P17 money,@P18 money,@P19 money,@P20 int,@P21 int,@P22 int,@P23 int,
@P24 varchar(6),@P25 int,@P26 datetime,@P27 varchar(18),@P28 varchar(12),@P29 int,@P30 varchar(12),@P31 int,@P32 varchar(8),@P33 varchar(4),@P34
varchar(12),@P35 tinyint,@P36 datetime,@P37 int,@P38 int,@P39 int,@P40 money,@P41 money,@P42 money,@P43 int,@P44 int,@P45 int,@P46 int',
'000000',80,'01-01-2008','1463286','0',27425002,'043902305X2 ',57153,'mtstdat4','0000',
'mtstdat4 ',1,'03-05-2008',0,0,0,$0.0000,$0.0000,$0.0000,4250207,0,0,3001752,
'000000',11,'03-02-2008','10 In Force (V011)','3 AwaitIssue',27425003,'043902305X2 ',57155,'mtstdat4','0000',
'mtstdat4 ',1,'03-05-2008',0,0,0,$0.0000,$0.0000,$0.0000,4250207,0,0,3001752
I want to replicate from SQL2000 to SQL2005. I had configured distributor, publisher in SQL2000 and also subscriber in SQL2005. But so far no replication was done on SQL2005. I wonder SQL2000 (SP2) and SQL2005 replication will it work? Is it true that I should install Service Pack 3 and above in order to replicate my database to SQL2005.
Thanks
Wint
Somebody knows how to restore a database backup from SQL 7 in a Server with SQL 2000 Installed?
If somebody knows how to do it will save me a lot of work?
Thanks a lot.
Linked server from SQL2005 to SQL2000
Hi
I use the following SQL statements to create a link server. RemoteServerName is an SQL2000 and I am executing this in another machine which is SQL2005.
Though the link server is created successfully, I am not able to se the tables under it so could not query anything.
----
USE [master]
EXEC master.dbo.sp_addlinkedserver @server = N'RemoteServerNameInstanceName', @srvproduct=N'SQL Server'
EXEC master.dbo.sp_serveroption @server=N'RemoteServerNameInstanceName', @optname=N'collation compatible', @optvalue=N'false'
EXEC master.dbo.sp_serveroption @server=N'RemoteServerNameInstanceName', @optname=N'data access', @optvalue=N'true'
EXEC master.dbo.sp_serveroption @server=N'RemoteServerNameInstanceName', @optname=N'rpc',@optvalue=N'false'
EXEC master.dbo.sp_serveroption @server=N'RemoteServerNameInstanceName', @optname=N'rpc out', @optvalue=N'false'
EXEC master.dbo.sp_serveroption @server=N'RemoteServerNameInstanceName', @optname=N'connect timeout', @optvalue=N'0'
EXEC master.dbo.sp_serveroption @server=N'RemoteServerNameInstanceName', @optname=N'collation name', @optvalue=null
EXEC master.dbo.sp_serveroption @server=N'RemoteServerNameInstanceName', @optname=N'query timeout', @optvalue=N'0'
EXEC master.dbo.sp_serveroption @server=N'RemoteServerNameInstanceName', @optname=N'use remote collation', @optvalue=N'true'
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname = N'RemoteServerNameInstanceName', @locallogin = NULL , @useself = N'False', @rmtuser = N'remoteUser', @rmtpassword = N'remotePassword'
Hello,
I am currently using vs2005 with sql2000 and have a parameter query getting records form my sql2000 db.
'Load existing data to textboxes for editingDim strSQL1 As String = "SELECT id, LogDate, LogTime, LogDD, StatDD, LogEvent FROM DEMO_DailyOccurrence WHERE completed = 0 AND RecordIdentify = @strOutdate ORDER BY id ASC "Dim scnnNW1 As SqlConnection = New SqlConnection(System.Configuration.ConfigurationManager.AppSettings("SQLconnection"))Dim scmd1 As New SqlCommand(strSQL1, scnnNW1)With scmd1.Parameters.Add(New SqlParameter("@strOutdate", SqlDbType.DateTime)).Value = strOutdate1End WithDim sda1 As New SqlDataAdapter(scmd1)Dim ds1 As New Data.DataSetTrysda1.Fill(ds1)Catch ex As ExceptionEnd Try
strOutdate1 is a date and has been tested and proven to be OK.
When I run the same code against my sql2005 db, the query returns nothing.
Do I have to handle something differently for sql2005.
Thanks
Peter
Hi,
I'd like to host a small website created using VS2005 EE with a company that offers just SQL2000 DB support.
My question, can i use the DB created by VS site manager as a DB to the site, if not, is there any alternatives.
Thanks.
Hi all,
I'm new to SQL and I am trying to move from SQL 2000 to SQL 2005 on another server. When I change my connection string from the old IP to the new one(with SQL 2005) my web app crashes. Here is the command string I need to change:
<add key="ConnStr" value="data source=myoldIP;initial catalog=gt-test;uid=myuserid;pwd=mypassword;" />
I have copied the old database exactly the way it was to the new one. I need to change myoldIP to my new one but when I do it crashes... Any ideas?
Thanks in advance for your help
-Will
I'm having trouble accessing SQL2005 Standard Edition as a secondinstance of SQL Server where the first instance is SQL 2000 EnterpriseEdition. I installed SQL 2005 as a named instance "SQL2005". Theserver is running Windows 2000 SP4 ON A 32-Bit machine. When I look inServices I see the SQL Server (SQL2005), SQL Server Agent (SQL2005)services there. I went into SQL Server Configuration manager anddisabled the named pipes protocol and only have TCP/IP and by defaultShared Memory enabled to rule out that named pipes is causing theproblem. In SQL Server Configuration Manager I created an alias"computername$SQL2005" and was able to connect to database engine"computernameSQL2005" through SQL Server Management Studio WHILE ONTHAT BOX.But when trying to access the 2005 instance from another server(64-bit Windows 2003 SP1) I'm having trouble. On the 64-bit machine Idisabled the named pipes protocol for both "SQL Native ClientConfiguration (32-bit)" and "SQL Native Client Configuration". Under32-bit I created the alias "machinename$SQL2005" to point to the IPaddress of the 32-bit machine. In SQL Server Management Studio whentrying to connect to the database engine "machinename$SQL2005" itdefaults to the SQL 2000 instance. How do I access the SQL2005instance from a remote server?Any help would be appreciated.Mike
View 5 Replies View RelatedWe have the follwoing environment
Sql2005 64 bit edition standard edition servers
Sql2000 Sp3 enterprise edition servers
when we try to access a table in sql2000 from sql2005 using linked server, the query also uses inner joins and max()
it gives the follwoing error
"Msg 8180, Level 16, State 1, Line 1
Statement(s) could not be prepared.
Msg 207, Level 16, State 3, Line 1
Invalid column name 'Col1017'."
The query looks something like this
select *FROM [X.X.X.X.].HRDE.dbo.PS_HX_LVE_FRM_SRCH A, [X.X.X.X.].HRDE.dbo.PS_NAMES B
WHERE A.EMPLID = B.EMPLID
AND A.HX_LEAVE_STATUS = 'PND'
AND B.EFFDT IN (SELECT MAX(EFFDT) FROM [X.X.X.X.].HRDE.dbo.PS_NAMES WHERE EMPLID = A.EMPLID)