Can someone please tell me what's wrong with my script below? I am trying to restore a database backup to a different database name and location.
RESTORE DATABASE test
FROM 'C:mybackup.bak'
WITH MOVE 'h_data' TO 'C:Program FilesSQL2000MSSQLDataTest_data.mdf'
Thanks
SHK
We have one development server and another production server. I am trying to restore a production dat file to the development server. I can get as far as adding the path name of the remote file (e.g. serverd$directoryfilename), but I can`t seem to enable the "Restore Now" button. The file actually displays in the Devices and Files section, but when I click it, nothing happens.
There happens to be another pre-existing device that does respond to my click - the device is added to the "Backup Information" section of the screen, and the Restore Now button is enabled - but that isn`t really the one I want to restore from.
Is there a step I`m missing?
Thanks in advance,
Lisa
I am trying to restore master to a new server but location of data and log files is different in this new server. The previous location was 'D:Program FilesMicrosoft SQL ServerMSSQLdata" the current location is in the C: Drive; when trying to restore using MOVE:
RESTORE DATABASE master FROM DISK ='\PfileserversqlbackupMDFfilesmaster_db_20070 8170121.BAK' WITH RECOVERY ,
MOVE 'master' TO 'C:Program FilesMicrosoft SQL Serverdatamaster.mdf',
MOVE 'mastlog' TO 'C:Program FilesMicrosoft SQL ServerMSSQLdatamastlog.ldf'
I get the following error message:
The system database cannot be moved by RESTORE
Is there a way you can restore master to a different location?
Thanks,
Carlos
How do I restore a table to a location other than the table as it exists now?
Did that make sense?
I am attempting to restore a master database backup to a new location
(new_masterdb) and am getting the following error:
System.Data.SqlClient.SqlError: There is already an object named 'sysnsobjs' in the database. (Microsoft.SqlServer.Smo)
There is empty so I am not sure why it is finding this object. How can I get around this?
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
Any advice on how to get this thing finished out?
I had to to relocate the database log file and I issued an Alter database command but by mistake I put a space in the file name as below. The space is at the beginning file name. Now I am unable get the database loaded to SQL Server. The database has 2 replications configured, so deleting and re-attaching the database means the replication needs to be re-configured. Is there an alternative way to issue a command to update the database FILENAME ? Not sure if this can be edited in master database (sys files).
ALTER DATABASE [User_DB]
MODIFY FILE (NAME = User_DB_log, FILENAME = 'I:SQLLogs User_DB_log.ldf')
GO
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
Got a couple of questions
1. If you are managing databases in SQL Express with SQL Server Managment Express CTP, why doesnt VBE place the database there where you can see them? I can create a database inside SQL Server Managment Express CTP and view its tables, relations,etc. from within SQL Server Managment Express CTP, but when I make a database with VBE it does not show up in SQL Server Managment Express CTP. Also the database that was made inside SQL Server Managment Express CTP cannot be seen from VBE. Why? what did I do wrong, or is it supposed to be like that? Is that where you would want to place a database for multiple pc to share?
2.Login Question ;-----shouldnt post this here but,
Is there a reason why you dont want to use SQL Authetication over Windows? The are a few pcs here that doesnt have user accounts installed(I know that not a good practice, but when you have multiple people needing different data quickly- switching users is not preferred, its a time thing for what I would call dummy terminals).
How do you take an instance of SQL and change to SQL Authetication over windows?
Curious?
David
Hi i m Uday,i want to delete ie Drop a database from specified location
for this i used this query as
DROP DATABASE AdventureWorks1,'C:Sql_dB_creatorsqlDB_creatorApp_DataAdventureWorks1'
but i gives incorrect syntax error.
So plz give the sql query to Drop a Database from specified path
Thank You
uday
Hi all,
We need an architecture in which one office is in pune and other in mumbai,
principal server is in pune and mirrored in mumbai,
now we need an architecture in which mumbai user will performing read only operation from mumbai server (local server )and write operation in pune server(remote server)
and pune user will be performing read and write operation in pune server(local server)
now when link between pune and mumbai goes down, mumbai users will not be having acess to pune server so at that time mumbai user will not be performing write operation in pune server (local server) and when link goes up we want mumbai server to get updated with pune server.
how this is possible or any other different solution to this, what mandatory is we want mumbai users to perform read operation from mumbai server ONLY.
Regards,
Vinit Fichadia
Thanks,
Vinit Fichadia
Hai,
I would like to know, is it possible to copy the entire database from the object browser to a particular location of hard drive and vice verse. (simaltaneously copy .ldf file also).
If possible can you write script for this?
From SQL Server 2005(object browser) to c:mydatabase
Thanks.
Regards
Kashif Chotu
I can install the SQL Server Express in a computer and locate the database files in another computer of the same local network?
View 1 Replies View RelatedHey,
I'm trying to get the information where the databases are stored by default.
With Management Studio I can look on Server Properties -> Database Settings -> Database Default locations
Is there a way to read this information in TSQL?
Cheers,
Manolo
SQL location:
When I create the setup for the Teacher Starter Kit( Created with Visual Basic) (Click Once Setup) and install it in someone else computer, I can not find the SQL database ( in sense of opening it and tweak it in case i need to). the program works fine and store data, but where is the database?!! that I can not find. can you help me please? or explain.
Later On I would need to instal the ClickOnce setup of this application on a server in so everyone can reach it. is the the ClickOnce setup sufficient for this task. and will the database be added to the SQL SERVER databases ?
Please advice ...
Thank you.
RM
If you enter "Create Database test", the database files (mdf file & log file) are created, by default, in:-
C:Program FilesMicrosoft SQL ServerMSSQLData
I want to change that to:-
D:Database Files
I sucessfully moved the model database to this location (using the instructions in BOL) assuming that all new databases would now get created in the same location, but they don't. They still get created in:
C:Program FilesMicrosoft SQL ServerMSSQLData
So how do I change the default?
(It's not satisfactory to have to move each database after it's created)
Thanks, Andy Abel
Hi again,I have setup a maintenance plan schedule, my question is; can I create anadditional plans located on another network location ?In my attempts the only locations displayed are those on the current server.thank you
View 1 Replies View RelatedI did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
I have installed my modell database onto c:mssql7data...
How do I now change the properties of this so that when someone creates a database, the path it will get created to is set to d:
I thought that I could just move model, but it seems that this isn't possible.
Any advice?
thanks
derek
changing master database location in sql server 2000
HELLO PLEASE HELP ME I AM TRYING TO CHANGE THE LOCATION OF MASTER DATABASE ( MDF AND LDF ) AND ERRORLOG FILES I HAVE TRIED EDITING STARTUP PARAMETERS IN ENTERPRISE MANAGER I FAILED ,I TRIED IN COMMAND
PROMPT "SQLSERVR.EXE " I SUCCEEDED IN CHANGING THE DATA FILE AND ERROR LOG BUT UNABLE TO CHANGE THE LOG FILE PATH FROM DEFAULT LOCATION C:PROGRAM ............
TO D:DATA
PLEASE GIVE ME THE PROCESS TO CHANGE DATA ,LOG AND ERROR LOG FILES of master database
thanq in advance
I have C,D,E drives on server. Data files will be on D and Log on E. My question is what is best practice for data and log files for system databases during sql server installation selection? Should they be on C drive along with SQL Server installation or D & E? If they should not be on C then what is the reason and what is benefit to move them on other drives.
View 9 Replies View Related
Hi,
I would like to change the default location where new databases are created.
In Server Management Studio, I right clicked my instance and selected Properties. I selected the Database Settings option and am presented with an option to change the Database Default Location (the location for databases and logs can be changed here). If I change the paths for the DB's and logs, and create a new DB, the new files are saved to the new default location paths that I just entered.
My question is this:
If I change these paths, will my system databases (master, model, msdb, tempdb) still be accessible and usable by SQL server? I don't need (want) to change the location of these files, only all my other databases and logs.
Will this do what I want?
Thanks for the help!
Oliver
Hey everyone I've got this question that has me stuck for the last few days but its an important part of my website.....What I am trying to do is basicly have a user be able to upload a file, have that uploaded file plus some other info automaticly display on other parts of my site, and have a different user eventually be able to download that file....I have thought about allowing the file upload as a BLOB but still cannot find a proper way to execute this using VB, plus I have heard that this way of doing it is not reccommeneded cause databases were not designed to store large files like this, lots of articles recommened having the file upload to a Folder on your server then get the binary data for the file that can be placed in a database to refrence that particular file.....Well this also proves to be a lot harder then said here is what I got so far (written in C#) protected void UploadBtn_Click(object sender, EventArgs e)
{
if (FileUpLoad1.HasFile)
{
FileUpLoad1.SaveAs(@"C:Documents and SettingsAdamMy DocumentsVisual Studio 2005ProjectsWebsiteFiles" + FileUpLoad1.FileName);
Label1.Text = "File Uploaded: " + FileUpLoad1.FileName;
}
else
{
Label1.Text = "No File Uploaded.";
}
}
and here is the asp part of the code that goes with it<asp:FileUpLoad id="FileUpLoad1" runat="server" />
<asp:Button id="UploadBtn" Text="Upload File" OnClick="UploadBtn_Click" runat="server" Width="105px" />
<asp:Label ID="Label1" runat="server" Text=""></asp:Label>
Now from what I know is I need to get the binary of the file which I have read you can do with the Page.Request.Files statement but again not sure how I would impliment this. Does anyone have any suggestions on which way I should take when dealing with this should I try and just use the BLOB method or use the binary refrence method? and if so how would I impliment this, heck even some good tutorials on the subject would be great... Thanks.....Adam
In SQL Server 2012 Instance properties ,database default location is not showing system drive E: which was my backup drive. How can I add it again?
View 8 Replies View RelatedI have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.
If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:
Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).
It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.
Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.
I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.
ThanksTim
I've configured log shipping to use for DR purposes. I'm concerned that the physical location of the secondary is mis-reported by SQL Server Management Studio.
Viewing the secondary location (with Studio DB_name Properties Files) shows the path of the primary DB (I expected it to show the path of the secondary).
This SQL command shows the correct/actual paths of both primary and secondary DB's when run on their host servers.
SELECT name, physical_name AS CurrentLocation, state_desc FROM sys.master_files
Is this just cosmetic?
Here is an Example of how the Studio shows the incorrect path for the secondary.
Example:
(Primary) servername=prodSrv, DBname=aquaDB, Actual_Path=G:aquaDB, SQL-studio-Properties-Path=G:AquaDB, sys.master_files Path=G:AquaDB,
Log shipped to
(Secondary / Read Only) servername=DRSrv, DBname=aquaDB, Actual Path=F:aquaDR, SQL-studio-Properties-Path=G:AquaDB(WRONG), sys.master_files Path=F:aquaDR
I'm using SQL Server 2012 and was attempting to move the msdb, model, and tempdb databases to a new location and accidentally gave their log files an mdf extension instead of ldf when providing the new pathfilename. After the server wouldn't start I checked my script and noticed my error. I have good backups of my system databases, so I was hoping to start the MSSQLSERVER service in single-user mode (using the -m startup parameter) and then just restore master using sqlcmd.Â
Unfortunately the service was starting but I couldn't connect via sqlcmd using any of the three protocols (it said the server was not found or not accessible each time). I also tried using the dedicated Admin connection but I got the same error. Then I went into the Templates folder and copied the master, msdb, model, and tempdb templates into the DATA folder and tried to restart SQL Server but still no luck (now the MSSQLSERVER service won't start at all). Is there an easy way to fix this mess without having to reinstall from the setup application?
1) We have got the database dump (.bak) file in one machine and we need to restore this to another machine where the SQL server (version 7) is running. But in the restore option there is no way to choose any mapped or shared drives in remote machine. Any pointer to resolve this problem?
2) Can you set up a database if you have the .mdf and .ldf files?
I am running SQL 7 on two seperate NT4 servers, a production server and a standby server. Both servers are configured for Mixed Mode authentication. If I back up a database on the production server, do I also need to back up the master database and restore it. My reasoning behind this is that users' login details will be held in the sysxlogins tbl in the master, while their access rights will be held in the sysusers tbl in the database I am backing up and restoring. If I back up and restore a database without backing up and restoring the master db as well, will the connection between the system login and the database user be broken.
Any comments/suggestions would be appreciated.
Hi there...
can any one help in following situation.
Suppose in a network I have two sql server ABC and XYZ and XXX (NT server) on same sub net.
1) I take a backup from server ABC on XXX (NT).(ie.. backup on network)
2) Can I restore database in XYZ which was backed up by ABC? How???
3) Suppose My ABC machines fails and I have to again install SQL Server 7 on it, will I be able to restore database from XXX(NT)? how???
regards,
zak
Currently have large database in three devices, named Cabinet cab2 and cab3. Cab3 device has been expanded twice. We are upgrading the hardware and would like to get the database into one device named cabinet and clean the mess up our vendor initially created for us. Any Ideas/steps on how this could be accomplished??? TKS Jerry
View 2 Replies View RelatedUsing SQL 7.0, has anyone backed up a database and restored on to a different database without the device files being moved around.
For example, With SQL 6.5 we used to backup PROD (source) database and restore to TRAIN (target) database. It worked just great regardless whether the databases are located on the same drive or not. We loved it and used it to refresh TRAIN from PROD on a weekly basis.(using sql Enterprise Mgr)
However, in SQL 7.0 when we attempt this procedure the database and log files of the TRAIN (target) are getting relocated to the drive location of PROD (source) database. Very strange.
Though thru object transfer i.e. import ,we can import data from PROD(source)
to TRAIN (target) database, but it is very slow and takes lot of time and performance degrades for source database (PROD)
Any input on above will be appreciated if backup / restore thru
enterprise mgr or TSQL procedure works in SQL 7.0 for restoring another database which is also on different drive i.e PROD (source) database on
drive C and TRIAN (target) database on drive E.
Thanks
Rajiv