I have a single .bak file containing full backups of 20+ databases.
Whats the best way of creating and restoring these database onto an instance on a separate server.
note that this is to migrate the whole instance of sql server onto a newly build server.
I have a backup that contains multiple databases. I am restoring it to a different server. How do I restore each database? Tried to restore under SQL Server Management Studio, but can only restore one of many from the backup (it appears it has only 1 logical file name in the backup) If you can refer me to a web page that would be great. I tried googling the topic but nothing seems to come up.
View 5 Replies View RelatedI'm building an app that will data stored in multiple databases. I have an endpoint with a single webmethod like so:
CREATE ENDPOINT [Rosters_Endpoint]
AUTHORIZATION [ADHEadministrator]
STATE=STARTED
AS HTTP (PATH=N'/SQL/Rosters', PORTS = (CLEAR), AUTHENTICATION = (DIGEST, NTLM, KERBEROS, INTEGRATED), SITE=N'10.0.1.116', CLEAR_PORT = 8080, COMPRESSION=DISABLED)
FOR SOAP (
WEBMETHOD 'GetACSStudents'( NAME=N'[fadb].[dbo].[GetACSStudents]'
, SCHEMA=DEFAULT
, FORMAT=ALL_RESULTS), BATCHES=DISABLED, WSDL=N'[master].[sys].[sp_http_generate_wsdl_defaultcomplexorsimple]', SESSIONS=DISABLED, SESSION_TIMEOUT=60, DATABASE=N'fadb', NAMESPACE=N'http://tempUri.org/', SCHEMA=STANDARD, CHARACTER_SET=XML)
Each webmethod will be accessed thru a multiview on the page.
It would seem to me that I can describe the webmethods using a fully qualified stored proc name and that wouldn't cause a big problem. But, my question is what does that DATABASE=N'fadb' clause do?
Does anybody see a problem with using a single endpoint to access multiple databases?
Any advice would be greatly appreciated as this is my first web app using this data access method.
Thanks.
HI Guys,
I just need to add multiple catalogs to the same linked server, in Sql Server 2000 or Sql Server 2005. Here i need only to add 3 databases in to a single linked server name.
Thanks In Advance,
Krishna
Hi, I'm planning to develop a project on .NET using Sql server 2005. Just stuck at a point where I need to decide that Should I use 2 or 3 huge databases with a lot of tables and data into it or should i create a lot of databases which would contain small chunks of data. Please let me know which option would give me a better performance. Thanks in advance
God is great. We are not God. But we still can be great.
Hi,
I want to create two databases by restoring from a
single backup file in sql server. I am using 2005-sqlexpress .Is it possible?
Thanx in advance..
Can someone explain what does this mean? This is from http://www.microsoft.com/technet/prodtechnol/sql/2005/dbmirror.mspx
<quote>However, all these techniques for coordinating client redirection with a database mirroring have an important limitation. Database mirroring occurs only at the database level, not the server level. Be careful if your application relies on querying several databases on a server, or uses multi-part object names to query across several databases. When several databases reside on one server, and they are mirrored to a standby server, it is possible that one of several databases might fail over to the standby but the others remain on the original server. In that case, you might need one connection per database that you are querying, so that you do not attempt cross-database queries on a standby server where only one database is a principal and the remaining are mirrors.</quote>
Also I read somewhere that if one mirrored DB fails, all other mirrored DB should also be transferred to the mirror.
For example: Let's say Srv1 (principle) and Srv2 (mirror) and Srv3(witness) are SQL servers with only default instances. The SQL instance has 4 DBs (DB1, DB2, DB3, DB4) and all of them are mirrored to Srv2.
An ASP.NET application has four seperate connection strings like:
objConn1 --> Data Source=Srv1;Failover Partner=Srv2;Initial Catalog=DB1;Integrated Security=True;
objConn1.connect();
objConn2 --> Data Source=Srv1;Failover Partner=Srv2;Initial Catalog=DB2;Integrated Security=True;
objConn2.connect();
objConn3 --> Data Source=Srv1;Failover Partner=Srv2;Initial Catalog=DB3;Integrated Security=True;
objConn3.connect();
objConn4 --> Data Source=Srv1;Failover Partner=Srv2;Initial Catalog=DB4;Integrated Security=True;
objConn4.connect();
If DB2 failsover to Srv2 (mirror), why should all other DBs be failedover?
Thanks
I have to mirror 3 DBs on my sql server instance . I have restored there full backups and log backups on mirror.I have also created endpoints on principal and mirror using default ports 5022 and 5023.
know if i can use the same endpoint for the databases on principal instance ?
I have multiple databases in the server and all my databases have tables: stdVersions, stdChangeLog. The stdVersions table have field called DatabaseVersion which stored the version of the database. The stdChangeLog table have a field called ChangedOn which stored the date of any change made in the database.
I need to write a query/stored procedure/function that will return all the database names, version and the date changed on. The results should look something like this:
DatabaseName DatabaseVersion DateChangedOn
OK5_AAGLASS 5.10.1.2 2015/01/12
OK5_SHOPRITE 5.9.1.6 2015/01/10
OK5_SALDANHA 5.10.1.2 2014/12/23
The results should be ordered by DateChangedOn.
I am fairly new to SQL Server and have a question about restoring a database . If a server that contained SQL Server was totally destroyed, and we have backups stored on an external server, how do we restore these backups. I am assuming I would have to install a new instance on the server we buy to replace the destroyed one. Once installed how do I convince or tell SQL Server that there are backups out there. I could move the archived backups back to the new server, but how do I point the new instance of SQL Server to these backups? Thanks in advance for any help.
View 1 Replies View RelatedGuys,I need to restore a database which is 400 GB plus. Usually a normalrestore from a backup file takes about 40 minutes. I have a databaseCompany on a server A. I need to use the backup of database company torestore as company1 on the same box. At the end, company and company1would reside on the same box. Is there any way to do it faster than anormal restore???Thanks in advance.RegardsJaideep
View 3 Replies View RelatedI try to restore a database but I receive the message "...the database is compressing. Uncompress the database and try again..."
In the original system (MSQL 2003) the backup is doing by the utility "backup"
In my personal system (MSQL 2005) I use the restore utility
Notice that I don't use winzip, winrar or other compressing software
Can anybody help me?
Thanks in advance
I would like to know if its OK to restore a SQL 7 user database to SQL 2000.
I have looked into Books On Line, with no success.
Anyone know where I might find some documentation on this topic?
Many thanks in advance.
Gary Andrews
I recently was given control of an SQL server that stop working.
We had no past backups of the database and the only file we had was the .mdf
I decided to install a fresh version of SQL 2000 on another server and created a database using enterprise manager with the same name as my database called SWATraining
I then stop the sql server
the first thing that I notice is that the .mdf that enterprise manager created had _DATA at the end of the name. Thus I renamed the the orginal .mdf SWATraining_Data and
copied it to the
C:program filesmicrosoft sql servermssqldata
when I started SQL the database was greyed out and had (suspect)labeled
How can I recover the database when the only file I have is the .mdf file??
I even tried
sp_attach_single_file_db @dbname = 'SWATraining',
@physname = 'C:Program FilesMicrosoft SQL ServerMSSQLDataSWATraining.mdf'
but reason this error
Server: Msg 5172, Level 16, State 15, Line 1
The header for file 'C:Program FilesMicrosoft SQL ServerMSSQLDataSWATraining.mdf' is not a valid database file header. The FILE SIZE property is incorrect.
Hello:
I'm working with two sql servers instances, ServerA and ServerB, which run under two different service accounts on different machines. They both have a database, DatabaseA, that has some encrypted fields.
If I take a backup of DatabaseA on ServerA and restore it on ServerB, I need to re-encrypt the Database Master Key (DMK) with the Service Master Key (SMK) as follows:
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'pwd used to encrypt DMK'
ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY
However, if I again take a backup on ServerB and then restore it on ServerA, I can use the DMK on ServerA without re-encrypting it with the SMK.
Shouldn't I have to re-encrypt the DMK with the SMK everytime I restore from a backup that was generated from a different server?
Thanks,
Cyndi
Dear Readers,Is it possible, like in Access, to link to tables in other SQL databases that are on the same server? I have a query that I originally had in Access that queered from multiply databases. It did this by having those other tables in the other databases linked to the database that had the query.
With all the new functionality, can 2014 now restore a single table from a standard backup without using any third party tools? I have looked, but can't see this listed as a feature (though that doesn't mean it's not there, maybe I've just missed it).
View 6 Replies View RelatedHello,
Does anyone else ever experience this problem, and if so do you know what causes it:
When ever I restore a database called say XXX.mdf, it restores OK and I can view via MSE as XXX.mdf. Then when I visit MSE again there is another database called C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataXXX.mdf - both are linked to the same .mdf file, however if you try to expand XXX.mdf nothing happens as though the database has been detached?
Cheers MArco
I have run into problems trying to use backed-up encrypted databases. I have an ASP.Net/SqlServer 2005 website for which I have production, test, and development environments, each on its own box. I have set up encryption using Master Keys, Certificates, and Symmetric Keys using the following commands:
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'password'
CREATE CERTIFICATE CERTIFICATE_NAME WITH SUBJECT = 'My Website'
CREATE SYMMETRIC KEY KEY_NAME WITH ALGORITHM = TRIPLE_DES ENCRYPTION BY CERTIFICATE CERTIFICATE_NAME.
All databases have the same certificate and symmetric key names. The Production database has a different password than the development and test databases.
I am running into problems when I back up the development database and try to move it to the test environment. When I do the move, and then try to access the encrypted data, I get an error "An error occurred during decryption", even though they are the "same" database (I originally detached and copied the development database to the test box when I set up the test environment) with the same password.
I then try the following commands, which I used when I brought the development database over to the test box the first time:
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'password'
ALTER MASTER KEY REGENERATE WITH ENCRYPTION BY PASSWORD = 'password'
This caused the following error:
"An error occurred while decrypting certificate 'CERTIFICATE_NAME' that was encrypted by the old master key. The FORCE option can be used to ignore this error and continue the operation, but data that cannot be decrypted by the old master key will become unavailable."
So, how do you set up encrypted databases so that you can backup from one database server and restore on another? This problem will be very important when I set up a backup production database server.
I have a question regarding moving databases within the same server but to a different drive. Using the 'Alter Database' query transaction procedures within the SQL Server Management Studio, I'm able to take a user database offline and move it. However, when using the Alter transaction to bring the database back online, I get errors. There was also an attempt that seemed to work, but the app that uses the database through ODBC can't see the database that was moved and errors out.
How can databases be moved and connections re-established within the same server?
Thanks...
Hello,
I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.
I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task scheduler on the server before the disaster recovery.
However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task scheduler and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.
----------------------------------------------------------------
Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
----------------------------------------------------------------------
My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.
Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.
I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.
This is some kind of issue with SQL Server Express being restored by tape backup.
Any suggestions, thanks.
I am working on a task. Currently we are taking a database backup and keeping that backups in a folder. The backups doesn't have time stamp on it. My task is need to get the latest backup and copy that backups into some other server and then restore the database from there.I am planning to create SSIS package.Do we need script task for this task.How to get the .bak with latest create or moidified date. For now we doesn't have timestamp so need to go based on modified date?
View 9 Replies View Related
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
I have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
I was contacted by the SAN team to test backup/restore of larger databases using a split-mirror backup (BCV) or clone that is taken from production db server and copied to another sql box. They want to use this process once a week. I see the mounted drives with the data/log files. All looks good. Initially I attempted to attach the databases and received (Unable to open the physical file db.mdf Operating System Error 5 Access is denied). I manually granting SQLServerMSSQLUser$<computer_name>$<instance_name> on all of the physical files 20 total. That worked.
Since this will be weekly, the SAN team performed the copy again and now none of the databases can communicate with the newly copied files. NTFS permissions need to be set again. I'm getting (Operating System error 21: the device is not ready). Is there something that I'm missing in this process how the vendor BCV clones the data and SQL communicates with the copied files as I was thinking it would be more automated process?
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
How to insert single row/multiple rows into multiple tables by using single insert statement.
View 1 Replies View RelatedHi all.
I don't know if this is the right forum to post this question, but here it goes.
We have restored into sql 2005 the database backups made in sql 2000. We connect with trusted connection and application roles, and when trying to execute a transaction to another database (with the guest user), we get a permission error.
Does anyone know if, apart from restoring the databases, we should do something else to get the guest user working the same way as with sql 2000 in the restored databases?
Thanks in advance for your help.
I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary',
@profile_name =
'SQL SMTP',
[code]....
Hi,
I'm trying to create a database that takes specific information from a number of databases on different servers to make some reporting that we have much easier.
I'm pretty new to SQL so I'm not sure of the best way to proceed. I read an article that suggested I use the OPENROWSET command. The problem is, the version of SQL that came with one of the programmes we use is limited and will not allow you to turn on the allow "Ad Hoc distributed Queries" so the SLQ statement will not execute.
I'm confused why it won't let me to connect through ODBC as I've created a web page that selects data from this database with no problems!
Here is the SQL statement that I've written to make sure it is the correct one (on the msdn library page it said that this was the ODBC connection):
SELECT a.*
FROM OPENROWSET('MSDASQL','DRIVER=(SQL Server);SERVER=APPOLOACT7;UID=sa;PWD=***************',
'SELECT * FROM MDCTestAndDev.dbo.TBL_CONTACT') AS a
I've also created the ODBC connection using the tool on Administration Tools>Data Sources ODBC
Any help would be greatly appreciated (also any ways of selecting from one database and inserting it into another will be helpfull)
Thanks
Hi!
I have 7 source databases and one target database, all using the same structure. The structure is made of 10 tables, with foreign key constraints.
I need to merge the source databases into the target (which won't have any data before that process, but will already have the correct schema), and to keep the relationships between the records.
I know how to iterate over the source databases (with SMO foreach), but I'd like to know if someone can advise the best copy method for that context in SSIS ? (I don't want to keep the primary keys, but I need to keep the relationships...)
Any pointer most welcome!
best regards and thanks
Thibaut
Is it possible to have an ID that can access 2 databases? If it's possible, I have to create the same ID and password under each database?
View 6 Replies View Related