hey guyz...
i used this stored procedure code my system.. but it crashes saying "exclusive access could not be obtained becuase the database is in use"
i have included the stored procedure below. is the stored procedure correct?
if it is.. how can i sovle this problem?
CREATE Procedure spRestoreDatabase
@Path VARCHAR(100)
AS
Restore Database Test From Disk = @Path
GO
Is it possible to execute a stored procedure in one database, which thenitself executes a stored procedure from another database? We have decide tosplit our data into a tree structure (DB1) and data blobs (DB2) (we areusing MSDE and we have a 2gb limit with each DB so we've done it this wayfor that reason). I would like to, say, execute a stored procedure in DB1,passing in the data blob and other details, DB1 will create a tree node inDB1 and then add the blob record to DB2. DB1 will wrap in a transaction ofcourse, as will DB2 when it adds the blob. Is this possible?
View 1 Replies View RelatedI am trying to backup and restore a 20GB SQL database from a SQL Server 2012 to another SQL Server 2014, but I have come across the following issues:
1) The developers [against best practice] have stored multiple images in fields within the database as binary code.
This therefore exceeds the 65532 character limit in some fields, so even though the images do show [based upon the data saved within this field], I cannot find the data in the field beyond this 65532 limit, within SQL Server.
How can I export / locate this data after the 65532 character limit?
2) When I have attempted to restore the database I am getting this error message:
Restore of database 'zapkam' failed. (Microsoft.SqlServer.Management.RelationalEngineTa sks)
Additional information:
System.Data.SqlClient.SqlError: RESTORE detected an error on page (1:1592996) in database "zapkam" as read from the backup set. (Microsoft.SqlServer.SmoExtended)
I have managed to restore two other smaller databases using the same technique, but am wondering if it's an issue with the database itself.
3) I have uploaded this database to the new server using FileZilla FTP Client, but it has cut out, painfully at 80% + 90% on a couple of occasions.
Is there a better solution for uploading these big files that I could possibly use? For example, uploading table by table or similar...
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Thanks in advance
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
Any advice on how to get this thing finished out?
Greetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
is it possible to insert record into second database from a stored procedure which is in first database?
View 1 Replies View RelatedI am wondering if there is a way to create a procedure in a logging database that can identify the source database from which it is invoked. DB_NAME() of course returns the name of the database in which the stored procedure exists. I could pass the database name as a parameter to the proc, just wondering if there is another way.
This is SQL 2005, I did look into the sys.dm_exec views but nothing seems to have a dbid reflecting the calling context.
Thanks,
Mike
I have a stored procedure that is located in one database and I would like to have it execute against a different database. My problem is when I go to execute it, it is still executing against the database it is stored in. Is it possible to tell this stored procedure when it runs to execute its code against this second database?
This is what I have now, which isn't working:
Code Snippet
use [Database2]
exec [Database1].[dbo].usp_SetupDatabaseUser
The end result still executes against Database1.
Thanks for any advice,
Flea#
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hi,
I have a set of databases. Each user had his own database. Every database had the same stored procedures. The is one "admin" database where content about these users is stored.
When I want to update or change a stored procedure I have to update it in every database. Therefore I want to put the stored procedures in the "admin" database. From there I have to access the databases of the user. I want to send the database name as a parameter.
How can I change de database which te procedure should access?
If I use the "use" statement I complains about that I can't use that command in a stored procedure. I've tried this method too:
SELECT * FROM @databasename.dbo.tblname
but that's not accepted too.
Does anybody know how to select another database in the stored procedure?
Hi there :)
I was hoping someone could help me figure out why this doesn't work....
I have a class called ProductsDB with a method called AddProduct that looks like this:
public String AddProduct(int categoryID, int makeID, string name, double price, double saleprice, double offerprice, int homepage, string thumbpath, string imagepath, string description)
{
// Create Instance of Connection and Command Object
SqlConnection myConnection = new SqlConnection(ConfigurationSettings.AppSettings["ConnectionString"]);
SqlCommand myCommand = new SqlCommand("ProductsAdd", myConnection);
// Mark the Command as a SPROC
myCommand.CommandType = CommandType.StoredProcedure;
// Add Parameters to SPROC
SqlParameter parameterCategoryID = new SqlParameter("@CategoryID", SqlDbType.Int, 4);
parameterCategoryID.Value = categoryID;
myCommand.Parameters.Add(parameterCategoryID);
SqlParameter parameterMakeID = new SqlParameter("@MakeID", SqlDbType.Int, 4);
parameterMakeID.Value = makeID;
myCommand.Parameters.Add(parameterMakeID);
SqlParameter parameterName = new SqlParameter("@Name", SqlDbType.NVarChar, 50);
parameterName.Value = name;
myCommand.Parameters.Add(parameterName);
SqlParameter parameterPrice = new SqlParameter("@Price", SqlDbType.Money, 8);
parameterPrice.Value = price;
myCommand.Parameters.Add(parameterPrice);
SqlParameter parameterSalePrice = new SqlParameter("@SalePrice", SqlDbType.Money, 8);
parameterSalePrice.Value = saleprice;
myCommand.Parameters.Add(parameterSalePrice);
SqlParameter parameterOfferPrice = new SqlParameter("@OfferPrice", SqlDbType.Money, 8);
parameterOfferPrice.Value = offerprice;
myCommand.Parameters.Add(parameterOfferPrice);
SqlParameter parameterHomepage = new SqlParameter("@Homepage", SqlDbType.Bit, 1);
parameterHomepage.Value = homepage;
myCommand.Parameters.Add(parameterHomepage);
SqlParameter parameterThumbnail = new SqlParameter("@Thumbnail", SqlDbType.NVarChar, 50);
parameterThumbnail.Value = thumbpath;
myCommand.Parameters.Add(parameterThumbnail);
SqlParameter parameterImage = new SqlParameter("@Image", SqlDbType.NVarChar, 50);
parameterImage.Value = imagepath;
myCommand.Parameters.Add(parameterImage);
SqlParameter parameterProductID = new SqlParameter("@ProductID", SqlDbType.Int, 4);
parameterProductID.Direction = ParameterDirection.Output;
myCommand.Parameters.Add(parameterProductID);
try
{
myConnection.Open();
myCommand.ExecuteNonQuery();
myConnection.Close();
// Calculate the ProductID using Output Param from SPROC
int productId = (int)parameterProductID.Value;
return productId.ToString();
}
catch
{
return String.Empty;
}
}
And then in another cs file for my aspx page I have an event handler for an add button in a webform, which looks like this:
// Add New Product to ProductDB database
bikescene.Components.ProductsDB accountSystem = new bikescene.Components.ProductsDB();
String productId = accountSystem.AddProduct(Int32.Parse(DDLproductcategory.SelectedValue), Int32.Parse(DDLproductmanufacturer.SelectedValue), TBproductname.Text, Double.Parse(TBproductprice.Text), Double.Parse(TBproductsaleprice.Text), Double.Parse(TBproductofferprice.Text), Int32.Parse(DDLproducthomepage.SelectedValue), thumbnailpath, imagepath, TBproductdescription.Text);
And finally, here is my stored procedure:
CREATE Procedure ProductsAdd
(
@ProductID int,
@CategoryID int,
@MakeID int,
@Name nvarchar(50),
@Price money,
@SalePrice money,
@OfferPrice money,
@Homepage int,
@Thumbnail nvarchar(50),
@Image nvarchar(50),
@Description nvarchar(500)
)
AS
INSERT INTO Products
(
productID,
categoryID,
makeID,
name,
price,
saleprice,
offerprice,
homepage,
thumbpath,
imagepath,
description
)
VALUES
(
@ProductID,
@CategoryID,
@MakeID,
@Name,
@Price,
@SalePrice,
@OfferPrice,
@Homepage,
@Thumbnail,
@Image,
@Description
)
SELECT
@ProductID = @@Identity
GO
Basically, my images are uploaded to the server just fine but nothing is being added to the database + I don't get any error messages.
Any ideas?
Many thanks indeed :)
I am trying to write a stored procedure that has an inner join between two tables from two different databases on the same sql server.
Something like...
Select * FROM
DB1-table1 INNER JOIN DB2-table1
ON DB1-table1.ID = DB2-table1.ID
yada yada yada.......
Does anyone know how to do this or is it possible? If so, what database should I put the stored procedure in or does it matter?
We are trying to develop some standards for SQL stored procedures and I am wandering what is the preferrable method to reference a table within a stored procedure for use within a Client Server / Web OLTP.
One:
SELECT Customer_Id, Customer_Name FROM CUSTOMER
Or TWO:
SELECT Customer_Id, Customer_Name FROM [DATABASENAME].[dbo].[CUSTOMER]
Most of my background is in working with data warehousing which is constantly loading between a staging and main DB, so I am in the habit of using TWO, but is this the best method for an OLTP and why.
Thanks
Loren
Hi all,
I want to use a stored procedure to access data in different databases. I was wondering if it is possible to pass the database name to the stored procedure as a parameter and use it in the sql statement.
Thank you for all the help you can give me.
Regards,
Eve
I have created a stored procedure in the master database that can be run against any database on the server.
I call this procedure from a sql server agent job. In this job I specify the database I want the procedure to run against but it always seems to run against the master database (presumably because the procedure is in this database). I can't switch database inside the procedure so what can I do other than creating a copy of the procedure in every database?
Hi all,
I have an urgent problem. Can a stored procedure create a connection or access data from another database?
Thanks in advace. :)
Hi. I'm trying to write a stored procedure that will access another database on a different server. How can I set this up in a stored procedure? It is a SQL Server 2000 database and it will be using SQL server authentication. Thanks!
View 3 Replies View RelatedIs it possible to use a stored procedure to script an entire database in MS SQL 2000?
View 8 Replies View RelatedI am trying to create a database within a stored procedure, so that the database name is generated each time. Please review the attached code, as sql seems to error out on '@dname'
select @iStatus = 0
select @dbname = 'offline' + '_' + convert(char(6),getdate(),112)
create database @dbname
on
( name = @dbname + 'data',
filename = 'F:MSSQLData' + @dbname + 'data.mdf',
size = 10mb,
filegrowth = 10% )
log on
( name = @dbname + 'log',
filename = 'F:MSSQLData' + @dbname + 'log.ldf',
size = 5mb,
filegrowth = 10% )
select @iStatus = @@error
if @iStatus = 0
print 'Part 1: Database offline_' + @dbname + 'has been created successfully'
else
print 'Part 1: Database Offline_' + @dbname + 'failed to create, status ' + convert(varchar(10), @iStatus)
end
I am running Sql Server 2005, When I create a new stored procedure and try to save it, I'm prompted with the 'save file as dialog'. Is'nt the stored procedure suppose to be saved within the database?
View 2 Replies View RelatedHow do I correctly query from a different database table in a stored procedure?
Here is the procedure:
CREATE PROCEDURE spInsertRegistration
@firstname varchar(25),
@lastname varchar(25),
@job_title varchar(50),
@manager varchar(50),
@cost_center char(3),
@address varchar(50),
@city varchar(50),
@state_id INT,
@zip char(5),
@email varchar(50),
@phone char(10),
@roommate varchar(50),
@arrival datetime,
@departure datetime,
@special_needs varchar(500),
@result INT OUTPUT
AS
DECLARE @stateabr VARCHAR(2)
SET @result=0
SELECT @stateabr=state_abr FROM Public.dbo.state WHERE state_id=@state_id
INSERT INTO registration_form
VALUES(@firstname,@lastname,@job_title,@manager,@cost_center,@address,@city,@stateabr,@zip,@email,@phone,@roommate,@arrival,@departure,@special_needs)
IF @@rowcount>0
SET @result=1
GO
This is the specific line where I'm trying to access a different database:
SELECT @stateabr=state_abr FROM Public.dbo.state WHERE state_id=@state_id
Thank you.
how can we use 2 databases in 1 stored procedure.
like for example i want to get records from 1 table and insert it to other tables in another database.
thnx for the help.
I am very new to stored procedures and fairly new to SQL in general. I have a stored procedure that looks like this:
CREATE PROCEDURE sp_UpdateProductsTable
@prodName varchar(50),
@prodManufacturer varchar(50),
@prodShortDescrip text,
@prodLongDescrip text,
@prodCatId int,
@prodPrice varchar(6),
@prodSortOrder int,
@prodActive int,
@prodId int
AS
if( @prodId <> 0 )
begin
update Products set
Name = @prodName,
Manufacturer = @prodManufacturer,
ShortDescription = @prodShortDescrip,
LongDescription = @prodLongDescrip,
CategoryID = @prodCatId,
Price = @prodPrice,
SortOrder = @prodSortOrder,
Active = @prodActive
where ID = @prodId;
select ID as prodId from Products where ID = @prodId
end
if( @prodId = 0 )
begin
insert into Products ( Name, Manufacturer, ShortDescription, LongDescription, Price, CategoryID, SortOrder, Active )
values( @prodName, @prodManufacturer, @prodShortDescrip, @prodLongDescrip, @prodPrice, @prodCatId, @prodSortOrder, @prodActive );
SELECT SCOPE_IDENTITY() AS prodId
end
GO
I have recently added two new fields to the database that I need the stored procedure to act upon, but adding them into the above code does not work. I read somewhere that this would happen with new fields, but I do not know how to fix this issue. Could someone point me in the right direction and help me out? I also have some other tables and SP's that I need to update, but its the same issue, I think so fixing this one should help me out across the board.
Thanks in advance for your help.
From within a stored procedure in an existing database I'm creating a new database from the scratch.
In the query window if I write the statement:
CREATE DATABASE [tomasdb]
USE [tomasdb]
GO
CREATE PROCEDURE TEST1
AS
BEGIN
DECLARE @something varchar(12)
set @something = '123'
END
everything works ok and the database is created and the stored procedure Test1 is created within it.
However, if I want to do the same from another stored procedure (in another database), i.e. I write
EXEC('
CREATE DATABASE [tomasdb]
USE [tomasdb]
CREATE PROCEDURE TEST1
AS
BEGIN
DECLARE @something varchar(12)
set @something = ''123''
END
')
the problem I get is that I'm not allowed to put USE to change the execution context into [tomasdb] before the CREATE PROCEDURE statement.
My question is: how can I change the context in this situation / or / can I create the stored procedure in the [tomasdb] database somehow from outside (another context).
Thanks,
Tomas
Hello,I need to come up with a stored procedure that will allow me to readdata from another database. The database I need to read the data fromis a UniData residing on a Unix server. The stored procedure needs toreside on my sql 2005 server. The task is very simple in Access as wehave ODBC connections set up to the UniData via Informix (or IBM)UniData ODBC drivers. I can easily combine my UniData and Sql Servertables from within access. However, I can't seem to find a way toreplicate the same behavior in MS SQL Stored Procedure without the useof Access. Is that even possible?Thanks,Marek
View 7 Replies View RelatedAs I had real problems working my head around sp_spaceused, I've written anSP to do it (I also noted a lot of questions about this when "searching").Pass in a database name and it will return the size of the database as afloat (ie. 0.75 for 0.75mb). Update usage set to 1 indicates the DB shouldupdate its size information before giving you the result.Anyway, comments appreciate.ALTER PROCEDURE dbo.proc_BL_Get_Space_Used@DatabaseName NVARCHAR(54),@updateusage BIT,@Size REAL OUTPUTASBEGINDECLARE @dbsize DECIMAL(15,0)DECLARE @bytesperpage DECIMAL(15,0)DECLARE @pagesperMB DECIMAL(15,0)DECLARE @Error INTEGERDECLARE @ExecString NVARCHAR(256)DECLARE @ParmString NVARCHAR(128)SET @Error = 0/*Update usage for this database.*/IF @updateusage = 1BEGINDBCC UPDATEUSAGE (@DatabaseName) WITH NO_INFOMSGSSET @Error = @@ERRORENDSET NOCOUNT ON/*Work out the database size.*/IF @Error = 0BEGINSET @ExecString = 'SELECT @dbsize = SUM ( CONVERT ( DECIMAL (15 ), SIZE ) ) FROM ' + @DatabaseName + '.dbo.sysfiles WHERE (status & 64 =0)'SET @ParmString = '@dbsize DECIMAL(15,0) OUTPUT'EXECUTE sp_executesql @ExecString, @ParmString, @dbsize OUTPUTSET @Error = COALESCE ( NULLIF ( @Error, 0 ), @@ERROR )END/*and bytes per page.*/IF @Error = 0BEGINSELECT @bytesperpage = LOWFROM master.dbo.spt_valuesWHERE number = 1AND type = 'E'SET @Error = @@ERROREND/*pages per mb*/IF @Error = 0BEGINSELECT @pagesperMB = 1048576 / @bytesperpageSET @Error = @@ERROREND/*and finally, the result.*/IF @Error = 0BEGINSET @Size = CONVERT(REAL, @dbsize) / CONVERT(REAL, @pagesperMB )SET @Error = @@ERRORENDRETURN @ErrorEND
View 1 Replies View RelatedIs there a stored procedure installed by sql server 2000 that I cancall and just pass in the name of a new database and have it createthe database for me? If not, how do I do it in sql? Thanks.
View 3 Replies View RelatedI need to create a stored procedure in the master database that canaccess info to dynamically create a view in another database. Itdoesn't seem like it should be very hard, but I can't get it to work.Here's an example of what I want to do.CREATE PROCEDURE create_view @dbname sysnameASBEGINDECLARE @query varchar(1000)SELECT @query = 'use ' + @dbname + ' go CREATE VIEW ........'EXEC(@query)ENDIn this case, I get an error with the word "go". Without it, I get a"CREATE VIEW must be the first statement in a batch" error. I tried asemicolon in place of "GO" but that didn't help either.Thanks
View 4 Replies View Relatedhi
i have stored procedure and i need to access another database in my stored procedure
I'm going to query a table which is located in another database
as you know it is impossible to use the USE database keyword in stored procedures
so what should I do?
thanks.
Hello,
I have a query in my VB / SQL Server application, but I now want to replace that query with a stored procedure.
Do anyone know how I can go about calling a database procedure with connection as I have tried but getting errors. Thanks.
A stored procedure was created to update a database.
But, I don't know how to trigger it in code:
This is the example to create a dataset for Dropdownlist,
Dim da As New SqlDataAdapter(myCommand)
Dim ds AS DataSet = new DataSet() da.Fill(ds)
This way doesn't work for triggering the stored procedure for updating database
How to trigger the stored Procedure for updating the database in the code?
Thx.
Hi all,
I wonder if there is anybody that can help with this one.
As you know, you can pass variables into a stored procedure and then use these variables for table names, columns etc.
Now, you also know that you can access another database on the same server just by typing the name of it into your query.
The hard part:
Instead of hardcoding the database name into the stored procedure i want to use a variable and then pass this to reference the database name, in the same way you would reference anything else with a variable. I need to do this as i have to search for various results across multiple databases.
We currently use SQL server 2000 standard, though are looking into SQL 2005 - especially is this problem is easy to resolve in the latter.
Look forward to your help
Regards
Darren