Hi All,
How can I read a query result set (which are of type VARCHAR) into an array? i.e the result set comprises of just one column and 5 rows and i want to save these into an array to easily extract each row whenever i want to. Hope I have conveyed my idea clearly.
Gayathri
Hi I'am practically new in C#, so I want to ask you guys some question.Let say I have this query:"Select EmployeeID, EmpName from PI_Employee"How can I retrieve the result from EmployeeID column and EmpName column and put it into collections of array, so I can call the array and use it again in another function. Can I possibly do that in C# ? if so, how ? please help me guys, I'm on the edge of nervous wreck in here so I could use a little help, any kinds of help. Thanks. Best Regards.
View 2 Replies View RelatedI am between the "newbie" and "intermediate" stages of writing SQL code and I am wondering if there is a way to capture multiple results into one field so I can basically create a "set" for a unique identifier. Here is few result samples I receive from this code I am using now.
ReqNo ProcID
7102005 1409
7102005 1796
7139003 1411
7139003 6097
7261030 1409
7261030 1796
7268303 3998
7268303 4000
I would like to create a single row for each "ReqNo" and have a field that will an array of the "ProcID" results I receive. In other words, for the first "ReqNo" 7102005, can I create a field that will combine the 1409, 1796 into one field? I am trying to capture an array of integers used for that "ReqNo" so I can use that as a unique identifier in a join for another table.
So, ideally my result would be:
ReqNo ProcSet
7102005 1409, 1796
7139003 1411, 6097
7261030 1409, 1796
7268303 3998, 4000
Is this possible?
declare
@startdate smalldatetime,
@enddate smalldatetime ,
@month int,
@year int
select
@startdate = dateadd (dd, -7, getdate())
SELECT
@month = datepart (month, @startdate),
@year = datepart (year, @startdate)
SELECT
@startdate = convert (smalldatetime, convert(varchar(2), @month) + "/1/" + convert (varchar(4), @year))
select
@enddate = dateadd (dd, 1 , @startdate)
select distinct
pp_req_no as ReqNo,
pp_cproc_id_r as ProcID
from
risdb_rch08_stag..performed_procedure
(index pp_serv_time_r_ndx)
where
pp_service_time_r between @Startdate and @Enddate
and pp_status_v = 'CP'
and pp_rep_id > 0
order by
pp_req_no, pp_cproc_id_r
All,
I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.
"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."
Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.
Machelle
I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type.
What would I need to do to convert it to an Integer array?
@OfficerIDs as varchar(200)
Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs)
Thanks
I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg
View 4 Replies View Related
I have an Execute SQL Task that executes "select count(*) as Row_Count from xyztable" from an Oracle Server. I'm trying to assign the result to a variable. However when I try to execute I get an error:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "RowCount": "Unsupported data type on result set binding Row_Count.".
Which data type should I use for the variable, RowCount? I've tried Int16, Int32, Int64.
Thanks!
Hi all,
I copied the following code from Microsoft SQL Server 2005 Online (September 2007):
UDF_table.sql:
USE AdventureWorks;
GO
IF OBJECT_ID(N'dbo.ufnGetContactInformation', N'TF') IS NOT NULL
DROP FUNCTION dbo.ufnGetContactInformation;
GO
CREATE FUNCTION dbo.ufnGetContactInformation(@ContactID int)
RETURNS @retContactInformation TABLE
(
-- Columns returned by the function
ContactID int PRIMARY KEY NOT NULL,
FirstName nvarchar(50) NULL,
LastName nvarchar(50) NULL,
JobTitle nvarchar(50) NULL,
ContactType nvarchar(50) NULL
)
AS
-- Returns the first name, last name, job title, and contact type for the specified contact.
BEGIN
DECLARE
@FirstName nvarchar(50),
@LastName nvarchar(50),
@JobTitle nvarchar(50),
@ContactType nvarchar(50);
-- Get common contact information
SELECT
@ContactID = ContactID,
@FirstName = FirstName,
@LastName = LastName
FROM Person.Contact
WHERE ContactID = @ContactID;
SELECT @JobTitle =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN (SELECT Title
FROM HumanResources.Employee
WHERE ContactID = @ContactID)
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE ContactID = @ContactID)
ELSE NULL
END;
SET @ContactType =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN 'Employee'
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN 'Vendor Contact'
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN 'Store Contact'
-- Check for individual consumer
WHEN EXISTS(SELECT * FROM Sales.Individual i
WHERE i.ContactID = @ContactID)
THEN 'Consumer'
END;
-- Return the information to the caller
IF @ContactID IS NOT NULL
BEGIN
INSERT @retContactInformation
SELECT @ContactID, @FirstName, @LastName, @JobTitle, @ContactType;
END;
RETURN;
END;
GO
----------------------------------------------------------------------
I executed it in my SQL Server Management Studio Express and I got: Commands completed successfully. I do not know where the result is and how to get the result viewed. Please help and advise.
Thanks in advance,
Scott Chang
HI,
I ran a select * from customers where state ='va', this is the result...
(29 row(s) affected)
The following file has been saved successfully:
C:outputcustomers.rpt 10826 bytes
I choose Query select to a file
then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend
invalid TLV record
Thanks for your help
Ali
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:
SHOWS
showID
showTitle
SHOWACCESS
showID
remoteID
VIDEOS
videoDate
showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?
thanks
I am trying to code a WHERE xxxx IN ('aaa','bbb','ccc') requirement but it the return values for the IN keyword changes according to another column, thus the need for a CASE function.
WHERE GROUP.GROUP_ID = 2 AND DEPT.DEPT_ID = 'D' AND WORK_TYPE_ID IN ( CASE DEPT_ID WHEN 'D' THEN 'A','B','C' <---- ERROR WHEN 'F' THEN 'C','D ELSE 'A','B','C','D' END )
I kept on getting errors, like
Msg 156, Level 15, State 1, Line 44Incorrect syntax near the keyword 'WHERE'.
which leads me to assume that the CASE ... WHEN ... THEN statement does not allow mutiple values for result expression. Is there a way to get the SQL above to work or code the same logic in a different manner in just one simple SQL, and not a procedure or T-SQL script.
I'm using a subquery to return a delivery charge line as a column in the result set. I want to see this delivery charge only on the first line of the results for each contract. Code and results are below.
declare @start smalldatetime
declare @end smalldatetime
set @start = '2015-03-22 00:00' -- this should be a Sunday
set @end = '2015-03-28 23:59' -- this should be the following Saturday
select di.dticket [Contract], di.ddate [Delivered], di.item [Fleet_No], di.descr [Description], dd.min_chg [Delivery_Chg], dd.last_invc_date [Delivery_Invoiced],
[code]....
In this example, I only want to see the delivery charge of 125.00 for the first line of contract HU004377. For simplicity I have only shown the lines for 1 contract here, but there would normally be many different contracts with varying numbers of lines, and I only want to see the delivery charge once for each contract.
help strange result whan i do this
Code Snippet
SELECT unit_date, unit, ISNULL(NULLIF ((unit + DATEDIFF(mm, GETDATE(), unit_date)) % 4, 0), 4) AS new_unit
FROM dbo.empList
i try to get next unit value to next month
why i get this -1
on date
01/01/2008
1
-1
unit_date unit new_unit
01/02/2008
2
1
01/02/2008
1
4
01/01/2008
1
-1
01/02/2008
1
4
21/01/2008
1
-1
21/01/2008
1
-1
01/02/2008
1
4
TNX
how can i send array from asp.net to sql?
View 3 Replies View RelatedHi, I am trying to do a loop while a list of array is assigned ('CHP,CNH,COW') ... I am using comma seperator to get each list value ... but, it donest really do what I am trying to do ... pls help!!! How do I loop through each value and do the rest ...??
=====================================
DECLARE @ABBR AS NVARCHAR(50)SET @ABBR = 'CHP,CNH,COW'
DECLARE @SEP AS NVARCHAR(5)SET @SEP = ','
WHILE patindex('%,' + @ABBR + ',%', @ABBR ) > 0 BEGIN
-- do the rest
END
I want to do a query on an SQL Server 2005 db and have the results returned into aarray or collection in vb.net... how do I do this? I know the basicconnection and stuff.. just not how to get the result to an array thanks!
View 1 Replies View RelatedHi All,
I have this code below:Dim a As Integer = 0 While a <= myArray.Length() Conn.Open() Dim UpdateCmd As New SqlClient.SqlCommand("Update email_addr SET category = 'Deleted' where HP = @hp", Conn) UpdateCmd.Parameters.Add("@hp", SqlDbType.VarChar, 50).Value = myArray(a) UpdateCmd.ExecuteNonQuery() a = a + 1 Conn.Close() End While
BUt, When I run it, I receive error "Prepared statement '(@hp varchar(50))Update email_addr SET category = 'Deleted' wher' expects parameter @hp, which was not supplied. "
DOes anyone have the solution???
Thanks....
Hello, how can I use an array in a WHERE clause? If I had an array saystring[] NamesArray = new string[] {"Tom", "***", "Harry"} How would I do this:string myquery = "SELET name, city, country FROM myTable WHERE name in NamesArray" Thanks in advance,Louis
View 3 Replies View RelatedHi,
i m pretty new to this forum and c#.net
i m doin a project in c#.net
I have four values in my datarow array
for example
DataRow[] cmb;
cmb=dsResult.Tables[0].Select("Controls Like 'cmb%'");// Here i m getting four Rows
for(i=0;i<cmb.Length;i++)
{
cmb[i]=Session["cmb'+i].ToString().Trim()//Here i m getting error;Cannot implicitly convert type 'string' to 'System.Data.DataRow'
}
How to assign my session values to them.
I want to assign my value stored in the session variable to that array.Is there any way i can do it.Can i convert datarow array to string array! Please can any one help
me.
I have two CheckBoxList controls. One CheckBoxList is a group of area codes as they apply to our customers, and the second CheckBoxList is a group of categories of those customers. The code below works fine with either CheckBoxList as a standalone (this code applies to the Area Codes selection), but what I need is the VB code to combine the choices a user makes in both CheckBoxLists. Is this where parameterized SQL comes into play? Or can I/should I use an array statement to combine both CheckBoxList choices? Sometimes a user will select nothing in one CBL and a few choices in the other, or vice versa, or a handful of choices in both CBLs, so that they might want only customers in, say two area codes and then only the selected categories of those area codes. Need help on this one, thanks...Protected Sub btn_CustomerSearchCombine_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btn_CustomerSearchCombine.Click Dim ACSelections As Boolean = False Dim ACItem As ListItem For Each ACItem In cbl_CustomerSearchAREA.Items If ACItem.Selected Then ACSelections = True End If Next If ACSelections = True Then Dim ACSqlString As String ACSqlString = "SELECT Customers.CustomerID, Customers.CustomerName, Customers.CategoryID, Customers.EstHours, Customers.Locality, Categories.Category FROM Customers INNER JOIN Categories ON Customers.CategoryID = Categories.CategoryID WHERE " For Each ACItem In cbl_CustomerSearchAREA.Items If ACItem.Selected Then ACSqlString &= "Customers.AreaCodeID = '" & ACItem.Value & "' OR " End If Next ACSqlString = Left(ACSqlString, Len(ACSqlString) - 4) ACSqlString &= "ORDER By Customers.CustomerName" sql_CustomerSearchGrid.SelectCommand = ACSqlString End IfEnd Sub
View 7 Replies View RelatedI want to do something like the following but I get an error: Object reference not set to an instance of an object. SqlConnection sqlConnection = new SqlConnection("server=xxxxx"); SqlCommand [] cmd = new SqlCommand[3]; Object returnValue; cmd[0].CommandText = "DO QUERY"; cmd[1].CommandText = "DO QUERY"; cmd[2].CommandText = "DO QUERY"; cmd[3].CommandText = "DO QUERY"; } sqlConnection.Open();int i = 0;while(i<4){ cmd[i].CommandType = CommandType.Text; cmd[i].Connection = sqlConnection; cmd[i].ExecuteNonQuery(); returnValue[i] = cmd[i].ExecuteScalar();i++} sqlConnection.Close();How should I do the followingThanks
View 9 Replies View RelatedI have data which looks like below
actid labname
100 CKS
200 CKS;HDP;LAS
I need the data to be
actid labname
200 CKS
200 HDP
200 LAS
The ; is the seperator
For a reporting product I created a sp which created a temp table and then using my function below built. problem is the product won't allow me to create a temp table. With what I have below anyone have any creative ideas I could use. In-line sql, subquery views?
select enc_id,labcnt,order_name,date_due
reate FUNCTION fn_GET_ARRAY_VALUE(
@DELIMITER VARCHAR(100),
@STRING VARCHAR(1000),
@ARRAY_POSITION INT)
RETURNS VARCHAR(8000)
AS
BEGIN
DECLARE @CURRENT_POSITION INT
DECLARE @VALUE VARCHAR(8000)
SET @CURRENT_POSITION = 0
WHILE @CURRENT_POSITION<@ARRAY_POSITION
AND CHARINDEX(@DELIMITER,@STRING,0)>0
BEGIN
SET @STRING =
SUBSTRING(@STRING,
CHARINDEX(@DELIMITER, @STRING, 0)
+LEN(@DELIMITER),
LEN(@STRING)
-CHARINDEX(@DELIMITER, @STRING, 0)
+ LEN(@DELIMITER)
)
SET @CURRENT_POSITION = @CURRENT_POSITION + 1
END
IF CHARINDEX(@DELIMITER,@STRING,0)=0
SET @VALUE = @STRING
ELSE
SET @VALUE = SUBSTRING(@STRING, 0,
CHARINDEX(@DELIMITER, @STRING, 0)
)
RETURN(LTRIM(RTRIM(@VALUE)))
END
Hi,
Is it possible to have a column as array in SQL Server 2000- similar to Oracle's varray. If yes, how?
rgds,
Kishore
How would one implement an array in SQL Server ?
Specically, i'm parsing a field into the array, and doing operations on these elements.
Thanks.
Hi all,
My Issue is the next thing:
I have a table filled with contracts
I have Stoc that checks if contract has expired
If I start the Stoc I must give it the contractnumber with it like:
SP_expired 8
This works fine but now I want that the Stoc checks all the contracts by just starting the Stoc.
I don't really know how to do this, I have thinking about using an array.
But don't have an idea where to start....
Thnx in advance
Please excuse me if this is the wrong forum. I hope your combined genius will be able to point me in the right direction.
I have an ASP page that accepts any SQL query. I want to create a table based on the result set so the number of columns can grow/shrink. But I don't know how. Can anyone help me?
My ASP Code shows how I create a table with only 8 fields.
<%
Dim objConn
dim SQLstmt
Dim objRS
Dim SQLqry
Dim UID
Dim RecordArray
Dim I
UID = right(Request.ServerVariables("AUTH_USER"),8)
SQLqry = Request.Form("qry")
Set objConn = Server.CreateObject("ADODB.Connection")
objConn.ConnectionString="Trusted_Connection=yes;driver=SQL Server;server=Server;database=db;"
objConn.Open
If SQLqry = "" then
Response.Write "Please Enter a SQL Query"
Else
Set objRS = objConn.Execute(SQLqry)
Response.Write "<H5 align = ""center"">" & sqlqry & "</H5>"
Response.Write "<Table align = ""center"" border = ""1"">"
For I = 0 To objRS.Fields.Count - 1
Response.Write "<TD><B>" & objRS(I).Name & "</B></TD>"
Next
Do while not objRS.EOF
RecordArray = objRS.GetRows(30)
For I = 0 To UBound(RecordArray,2)
Response.Write "<TR>"
Response.Write "<TD>" & RecordArray(0,I) & "</TD>"
Response.Write "<TD>" & RecordArray(1,I) & "</TD>"
Response.Write "<TD>" & RecordArray(2,I) & "</TD>"
Response.Write "<TD>" & RecordArray(3,I) & "</TD>"
Response.Write "<TD>" & RecordArray(4,I) & "</TD>"
Response.Write "<TD>" & RecordArray(5,I) & "</TD>"
Response.Write "<TD>" & RecordArray(6,I) & "</TD>"
Response.Write "<TD>" & RecordArray(7,I) & "</TD>"
Response.Write "</TR>"
Next
Loop
Response.Write "</TABLE>"
objRS.close
objConn.close
set objRS=nothing
set objConn=nothing
End if
%>
hi guys im having some problems with arrays as parameter
what i want to do is pass a array of comma separated values i.e 12,24,36 and use the in(@parameter) but it doesnt work
i've found some solutions, like
ALTER PROCEDURE [dbo].[GetLawyers] ( @LawyerTypeIDs VARCHAR(100)
AS
DECLARE @SQL VARCHAR(2000)
SET @SQL = 'SELECT * FROM [dbo].[TB_VALOR_BANCOS]
WHERE [PARCELAS] IN (' + @LawyerTypeIDs + ')'
EXECUTE (@SQL)
but in my case doesnt work.
here is a part of my code
SELECT * FROM (
SELECT *, ROW_NUMBER()
OVER (PARTITION BY cod_banco ORDER BY coeficiente asc) AS RecID FROM tb_valor_bancos
where
(1 = CASE WHEN @TABELA IS NULL THEN 1
ELSE CASE WHEN TABELA = @TABELA THEN 1
ELSE 0
END
END
)
AND (1 = CASE WHEN @PARCELAS IS NULL THEN 1
ELSE CASE WHEN PARCELAS in(@PARCELAS) THEN 1
ELSE 0
END
END
)
...
i know there is a way to pass the array into a table but it doesnt work too
thanks
hi,
how can i split text separated by semicolumn in different cells:
text1;text2;text3;
into
1 - text1
2 - text2
3 - text3
thank you
I have seen several examples explaining the fact that a tablecontaining a field for each day of the week is for the most part anarray. An specific example is where data representing worked hours isstored in a table.CREATE TABLE [hoursWorked] ([id] [int] NOT NULL ,[location_id] [tinyint] NOT NULL,[sunday] [int] NULL ,[monday] [int] NULL ,[tuesday] [int] NULL ,[wednesday] [int] NULL ,[thursday] [int] NULL ,[friday] [int] NULL ,[saturday] [int] NULL)I had to work with a table with a similar structure about 7 years agoand I remember that writing code against the table was pretty close toHell on earth.I am now looking at a table that is similar in nature - but different.CREATE TABLE [blah] ([concat_1_id] [int] NOT NULL ,[concat_2_id] [int] NOT NULL ,[code_1] [varchar] (30) NOT NULL ,[code_2] [varchar] (20) NULL ,[code_3] [varchar] (20) NULL ,[some_flg] [char] (1) NOT NULL) ON [PRIMARY]The value for code_2 and code_3 will be dependently null and they willrepresent similar data in both records (i.e. the value "abc" can existin both fields) . For example if code_2 contains data then code_3 willprobably not contain data.I do not think that this is an array. But with so many rows wherecode_2 and code_3 will be NULL something just does not feel right.I will appreciate your input.
View 1 Replies View RelatedHi all,
I have data like this :
POHDR;JAKARTA;St.1DTL;1. ;00248337;8996006855701 ;083;041;002; 7,812.50; 312,500.00; 284,091.00; 8,875.00
first row is the PO header and the second is the detail. This data was collected using Export Import Wizard from flatfile and put it in one column. I want to split the header and the detail into different table and map each column separated by ; to a proper field. For this work I should check every column separated by ; with CHARINDEX function but I have to write the TSQL as much as the count of ;. It would be better if we can use array to simplify the code.
Can we use array in Transact SQL ? since I have no clue referring to SQLBOL. Thanks in advance.
Best regards,
Hery
Hi. Does anyone know how to pass a 2 dimensional array into a stores procedure? I need to loop through it and insert it into a table.
Thanks!
I'm using SQL Server 2005 and have have a table similar to the following:
Name Week Role
Bob 1 Primary
Bob 2 Backup
Bob 3 Primary
Joe 1 Backup
Joe 2 Backup
Mike 1 Primary
Mike 2 Backup
Is there a t-SQL query that will combine the role and week into an array and return a table like:
Name Role
Bob Primary: 1, 3
Backup: 2
Joe Backup: 1, 2
Mike Primary: 1
Backup: 2
Is there any way to make a CLR stored procedure that accepts an array style set of data? I want to make a stored procedure that accepts to parameters of type int, and then one more that is an array of name/value pairs. Is it possible to do something like this?