HI
I want to retrieve data in between two date formats using a query in SQL?
can i do it w/o using GUI tools?
For Exp i have sales data from date 11/11/2000 to 11/2004.
now as a user i want to give Input paramete value ranging between 06/06/2002 and 07/07/2002?
Is there any SQL query which i can use to retrieve the above date values?
Thanx in Advance
VS
I'm very new to SQL Server so please forgive me if this question is ridiculously simple. I have to upgrade the report engine from one that was used in a legacy VB6 app to a C#.net app. In doing so, I'm looking at assorted reports that came out of the old app. Here is the SQL code for one of them:
SELECT (LTRIM(STR(From_To,10,0)) + '-' + LTRIM(STR(From_To + 49,10,0))) AS Bonus_Earned, COUNT (Empl_ID) AS Men, round(SUM (SumDollars),2) AS Group_Earn, round((SUM (SumDollars) / COUNT (Empl_ID)),2) AS Calc0 FROM (SELECT CONVERT (int, round (SumDollars / 50, 2)) * 50 AS From_To, SumDollars, Empl_ID FROM (SELECT round(SUM (Actual_Hours_Dollars.Incentivedollars * Contract_History.Bonus_Pct / 100), 2) AS SumDollars, employees.Empl_ID FROM ((Employees INNER JOIN Actual_hours_dollars ON Employees.Empl_ID = Actual_Hours_Dollars.Empl_ID_R) INNER JOIN Contracts ON Actual_Hours_Dollars.Contract_ID = Contracts.Contract_No) INNER JOIN Contract_History ON Contracts.Contract_Idx = Contract_History.Contract_Idx_R where employees.empl_idx = (SELECT max(empl_idx) FROM Employees AS OuterEmployees WHERE OuterEmployees.empl_id = employees.empl_id AND outeremployees.Datex = (SELECT max(datex) FROM Employees AS InnerEmployees WHERE InnerEmployees.empl_id = employees.empl_id AND Inneremployees.disabled = 0 AND Inneremployees.Datex < '~EndDate~')) AND Contracts.Datex = (SELECT max(datex) FROM Contracts AS InnerContracts WHERE InnerContracts.contract_no = Contracts.contract_no AND InnerContracts.disabled = 0 and InnerContracts.deleted = 0 AND InnerContracts.Datex < '~EndDate~') AND Actual_hours_dollars.Datex >= '~StartDate~' AND Actual_Hours_Dollars.Datex < '~EndDate~' AND dateadd(month, Contract_History.Monthx - 1, dateadd(year, Contract_History.Yearx - 1900, '01 Jan 1900')) >= '~StartDate~' AND dateadd(month, Contract_History.Monthx - 1, dateadd(year, Contract_History.Yearx - 1900, '01 Jan 1900')) < '~EndDate~' and Actual_Hours_Dollars.IncentiveHours <> 0 GROUP BY employees.empl_ID) AS InnerRS1 GROUP BY ROUND (SumDollars * 2, -2) /2, SumDollars, Empl_ID) AS InnerRS2 GROUP BY From_To
I'm only including it for completeness. The key thing I'd like to draw your attention to are two variables that are clearly input parameters: ~StartDate~ and ~EndDate~.
My question is this: If I want to copy this code into SQL Query Analyzer and run it to see what kind of results I get back, what's the simplest way to define these two input parameters? I'm hoping you could just show me the syntax to define them above the SELECT statement.
Robert Werner
Vancouver, BC
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies View RelatedHi,
is it possible to change the appearence of input fields for parameters on the report server? My parameter is Multi-value with quite large amount of available values. On report server, user can (without scrolling) see only the first value. Parameter values are quite long, so user has to move alternally with both vertical and horizontal scrollbars to find the right value.
Thanks
Janca
I'm trying something like this:
CREATE PROCEDURE Add_Junk @Dist char, @CheckNo int =null OUTPUT AS
Set NoCount On
BEGIN TRANSACTION
INSERT INTO Junk (Dist)
VALUES (@Dist)
COMMIT TRANSACTION
select @CheckNo=@@IDENTITY
If what I pass is "416" I only get the "4" in my database and nothing else.
I don't get an error message.
What is wrong with my syntax?
PS I'm using Microsoft SQL 7.0
I have to create a report and I want all activity for the previous month.
I need to calculate the First and Last Day Prior Month to be used as Input Parameters.
Would something like this be the case or is there a better solution?
[code="sql"]
SELECT DATEADD(month, DATEDIFF(month, -1, getdate()) - 2, 0) as FirstDayPreviousMonthWithTimeStamp,
DATEADD(ss, -1, DATEADD(month, DATEDIFF(month, 0, getdate()), 0)) as LastDayPreviousMonthWithTimeStamp
[/code]
I was thinking get the first day of the previous and current month to exclude the Timestamp and use a less then first day of current month?
Hello, a question please. Could anyone say me if I can create a store procedure with 2 'select's statements into. Besides, I'd want to know if I can execute a "select" depending on input parameters.
Something like this:
create storeproc
Param1, param2
if param1 <> null
Select *
from table
where id = param1
else
Select *
from table
where id = param2
end if
Thanks in advance....
There is not a way to pass parameters to input of Web Service tasks. I heard this problem is fixed with SQL2K5 SP1 and even the online doc says that one can choose either "value" or "variable" when specifying input for web service tasks, but after I installed what-I-think-is SP1, there is still no way to do this.
If one can only specify values (hard-coded) as input to web service tasks, then this would be a very severe limitation. I hope I'm wrong, so could someone please give a pointer. Thanks
Kevin Le
I am able to perform my Stored Procedure, but I can't figure out how to get access to the OUTPUT parameters!Here is my code: Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim mySqlDataSource As SqlDataSource = New SqlDataSource
mySqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure
mySqlDataSource.ConnectionString = "my connection string"
mySqlDataSource.InsertCommand = "MyStoredProc"
mySqlDataSource.InsertParameters.Add("someId", TypeCode.Int16, 166)
mySqlDataSource.InsertParameters.Add("someNumber", TypeCode.Int16, 4)
' Add Some Parameter
Dim someParameter As Parameter = New Parameter("someParameterName", TypeCode.String)
someParameter.DefaultValue = New String("Some Value")
someParameter.Direction = Data.ParameterDirection.Output
mySqlDataSource.InsertParameters.Add(someParameter)
mySqlDataSource.Insert()
End Sub
Any ideas as to how I get the new value that was "hopefully" assigned to someParameter??? Thanks for any help
I've been tasked with creating a stored procedure which will be executed after a user has input one or more parameters into some search fields. So they could enter their 'order_reference' on its own or combine it with 'addressline1' and so on.
What would be the most proficient way of achieving this?
I had initially looked at using IF, TRY ie:
IF @SearchField= 'order_reference'
BEGIN TRY
select data
from mytables
END TRY
However I'm not sure this is the most efficient way to handle this.
The foolowing code I cannot seem to get working right. There is an open connection c0 and a SqlCommand k0 persisting in class.The data in r0 is correct and gets the input arguments at r0=k0->ExecuteReader(), but nothing I do seems to get the output values. What am I missing about this?
System::Boolean rs::sp(System::String ^ ssp){
System::String ^ k0s0; bool bOK;
System::Data::SqlClient::SqlParameter ^ parami0;
System::Data::SqlClient::SqlParameter ^ parami1;
System::Data::SqlClient::SqlParameter ^ parami2;
System::Data::SqlClient::SqlParameter ^ paramz0;
System::Data::SqlClient::SqlParameter ^ paramz1;
System::Int32 pz0=0;System::Int32 pz1=0;
k0s = ssp;
k0->CommandType=System::Data::CommandType::StoredProcedure;
k0->CommandText=k0s;
paramz0=k0->Parameters->Add("@RETURN_VALUE", System::Data::SqlDbType::Int);
//paramz0=k0->Parameters->AddWithValue("@RETURN_VALUE",pz0);
//paramz0=k0->Parameters->AddWithValue("@RETURN_VALUE",pz0);
paramz0->Direction=System::Data::ParameterDirection::ReturnValue;
paramz0->DbType=System::Data::DbType::Int32;
parami0=k0->Parameters->AddWithValue("@DESCXV","chicken");
parami0->Direction=System::Data::ParameterDirection::Input;
parami1=k0->Parameters->AddWithValue("@SRCXV","UU");
parami1->Direction=System::Data::ParameterDirection::Input;
//paramz1=k0->Parameters->AddWithValue("@RCOUNT",pz1);
paramz1=k0->Parameters->Add("@RCOUNT",System::Data::SqlDbType::Int);
paramz1->Direction=System::Data::ParameterDirection::InputOutput;
paramz0->DbType=System::Data::DbType::Int32;
//k0->Parameters->GetParameter("@RCOUNT");
r0=k0->ExecuteReader();
//pz0=System::Convert::ToInt32(paramz0->SqlValue);
bOK=k0->Parameters->Contains("@RCOUNT");
//k0->Parameters->GetParameter("@RCOUNT");
pz0=System::Convert::ToInt32(paramz0->Value);
pz1=System::Convert::ToInt32(paramz1->Value);
ndx = -1;
while(r0->Read()){
if (ndx == -1){
ndx=0;
pai0ndx=0;
pad0ndx=0;
r0nf=r0->FieldCount::get();
for (iG1_20=0;iG1_20<r0nf;iG1_20++){
this->psf0[iG1_20]=this->r0->GetName(iG1_20);
this->psv0[iG1_20]=this->r0->GetDataTypeName(iG1_20);
this->psz0[iG1_20]=System::Convert::ToString(this->r0->GetValue(iG1_20));
this->pas0[ndx,iG1_20]=System::Convert::ToString(this->r0->GetValue(iG1_20));
if (psv0[iG1_20]=="int") {pai0[ndx,pai0ndx]=System::Convert::ToInt32(r0->GetValue(iG1_20));pai0ndx++;}
if (psv0[iG1_20]=="float") {pad0[ndx,pad0ndx]=System::Convert::ToDouble(r0->GetValue(iG1_20));pad0ndx++;}
}
}
else {
pai0ndx=0;
pad0ndx=0;
for (iG1_20=0;iG1_20<r0nf;iG1_20++)
{ this->pas0[ndx,iG1_20]=System::Convert::ToString(this->r0->GetValue(iG1_20));
if (psv0[iG1_20]=="int") {pai0[ndx,pai0ndx]=System::Convert::ToInt32(r0->GetValue(iG1_20));pai0ndx++;}
if (psv0[iG1_20]=="float") {pad0[ndx,pad0ndx]=System::Convert::ToDouble(r0->GetValue(iG1_20));pad0ndx++;}
}
}
ndx++;
}
r0nr=ndx;
r0->Close();
k0->Parameters->Remove(paramz0);
k0->Parameters->Remove(parami1);
k0->Parameters->Remove(parami0);
k0->Parameters->Remove(paramz1);
return true;
}
Hi everyone
I have just starting creating some stored procedures for our system and have a question related to management of these.
When using input parameters using the following syntax:
CREATE PROCEDURE sp_someInputProcedure
@Username as varchar(16)
@Password as varchar(12)
@Name as varchar(50)
@Address as varchar(60)
@Zip as int
@City as varchar(30)
...
etc.
This is all well and good, but what if I make a change in the datamodel - for instance changing a datatype or the length of a varchar - do I need to remember to manually update all stored procedures that uses these columns/variables?
Seems like a bit of a hazzle. Is there an easier way to do this?
Many thanks,
Stian Danielsen
Epizone
How can I run a single SP by asking multiple sales question eitherby using the logical operator AND for all the questions; or usingthe logical operator OR for all the questions. So it's alwayseither AND or OR but never mixed together.We can use Northwind database for my question, it is very similarto the structure of the problem on the database I am working on.IF(SELECT OBJECT_ID('REPORT')) IS NOT NULLDROP TABLE REPORT_SELECTIONGOCREATE TABLE REPORT_SELECTION(AUTOID INT IDENTITY(1, 1) NOT NULL,REPSELNO INT NOT NULL, -- Idenitifies which report query this-- "sales question" is part ofSupplierID INT NOT NULL, -- from the Suppliers tableProductID INT NOT NULL, -- from the Products table, if you choose--a ProductID, SupplierID is selected also by inheritenceCategoryID INT NOT NULL, -- from the Categories tableSOLDDFROM DATETIME NULL, -- Sold from which dateSOLDTO DATETIME NULL, -- Sold to which dateMINSALES INT NOT NULL, -- The minimum amount of salesMAXSALES INT NOT NULL, -- The maximum amount of salesOPERATOR TINYINT NOT NULL -- 1 is logical operator AND, 2 is OR)GOINSERT INTO REPORT_SELECTIONSELECT 1, 1, 2, 1, '1/1/1996', '1/1/2000', 10, 10000, 1 UNION ALLSELECT 1, -1, -1, 1, '1/1/1996', '1/1/2000', 10, 1000, 1You can ask all kinds of sales questions like:1-I want all employees that sold products from supplierID 1(Exotic Liquids), specifically the ProductID 2 (Chang) from theCategoryID 1 (Beverages) between Jan 1 1996 to Jan 1 2000 and soldbetween $10 and $10000 - AND for my 2nd sales question2-I want all employees that sold CategoryID 1 (beverages) betweenJan 1 1996 to Jan 1 2000 and sold between $10 and $1000I want to get the common result of both questions and find outwhich employee(s) are in this list.Here are some of the points:1-I want my query to return the list of employees fitting theresult of my sales question(s).2-If I ask three questions with the logical operator AND, I wantthe list of employees that are common to all three questions.3-If I ask 2-3-4. questions with the logical operator OR, I wantthe list of employees that are in the list of the 1st "successful"sales question (the first question that returns any employee isgood enough)4-You can ask all kind of sales question you want even if theycontradict each other. The SP should still run and returnnothing if that is the case.5-Let's assume you can have the same product name from the samesupplier but under different categories. So entering a ProductIDshould not automatically enter the CategoryID also; whereasentering the ProductID should automatically enter its SupplierID.6-SOLDFROM, SOLDTO, MINSALES, MAXSALES, OPERATOR are mandatoryfields, you can't leave them NULL7-SupplierID, ProductID and CategoryID are the dynamic inputparameters, there can be 5 different combinations to choose from:a-SupplierID onlyb-SupplierID and a ProductID,c-SupplierID and a CategoryIDd-SupplierID, ProductID and a CategoryIDe-CategoryID onlyf-Any time you choose a ProductID, the SupplierID valuewill be filled automatically based on the ProductID'srelationshipg-Any of the three values here that is not chosen by theuser will take a default value of -1 (meaning return ALLfor this Column, in other words don't filter by this column)The major problem I have is I can't use dynamic SQL for choosingthe three dynamic columns as the 2nd row of records would have adifferent selection of dynamic columns (at least I don't know howif the solution is dynamic SQL). The only solution I can think oflooks pretty bad to me. I would use a cursor, run each row at atime, store a TRUE, FALSE value to stop processing or not andstore the result in another detail table. Then if all ANDquestions have ended with TRUE do a union of all the result andreturn the common list of employees. It sounds pretty awful as anapproach. I am hoping there's a simpler method for achieving this.Does anyone know if any SQL book has a topic on this type ofquery? If so I'll definitely buy the book.I appreciate any help you can provide.Thank you
View 7 Replies View RelatedHi,
I have 2 source tables emp_ass,aprvl_status these tables are not having common column to join. and 1 target table Time_Card, i have a stored procedure with 4 input parameters, emp_ass_id,status_id,start date,end date,i am inserting data into timecard based on emp_ass_id, my week start date is sunday and end date is saterday if emp start date is sunday i am just incremnting the start date by 7 days as end date is saterday and inserting that row, if employe statrt date is other than Sunday. i am just insering start date with to reach end date saterday, this work fine when i give the input parameters, now my reqirement is i need to automate this process as i need to get new emp_ass_id which is not in target table and insert his records based on his start date and end date,
ex:
if emp_ass_id is 1001, start date 1/1/2008 and end date is 2/1/2008 then i need to insert
Uniq_Id, emp_ass_id, start_date end_date status_id
1099
1001
1/1/2008 12:00:00 AM
1/5/2008 12:00:00 AM 1
1100
1001
1/6/2008 12:00:00 AM
1/12/2008 12:00:00 AM 1
1101
1001
1/13/2008 12:00:00 AM
1/19/2008 12:00:00 AM 1
1102
1001
1/20/2008 12:00:00 AM
1/26/2008 12:00:00 AM 1
1103
1001
1/27/2008 12:00:00 AM
2/2/2008 12:00:00 AM 1
the stored procedure will insert these records if i give the input parameters, now i need to automate this process by using SSIS. please help me,i need to get emp_ass_id,start_date,end_date dynamically from source table if emp_ass_id is not in target table.
Thanks in advance.
Hi,
id beg for a hint if our idea of a general dynamic CATCH handler for SPs is possible somehow. We search for a way to dynamically figure out which input parameters where set to which value to be used in a catch block within a SP, so that in an error case we could buld a logging statement that nicely creates a sql statement that executes the SP in the same way it was called in the error case. Problem is that we currently cant do that dynamically.
What we currently do is that after a SP is finished, a piece of C# code scans the SP and adds a general TRY/CATCH bloack around it. This script scans the currently defined input parameters of the SP and generates the logging statement accordingly. This works fine, but the problem is that if the SP is altered the general TRY/CATCH block has to be rebuildt as well, which could lead to inconstencies if not done carefully all the time. As well, if anyone modifies an input param somewhere in the SP we wouldnt get the original value, so to get it right we would have to scan the code and if a input param gets altered within the SP we would have to save it at the very beginning.
So the nicer solution would be if we could sniff the input param values dynamically on run time somehow, but i havent found a hint to do the trick.....
Any tipps would be appreciated...
cheers,
Stefan
Hi Everyone,
I haven't been able to successfully use the ADO.NET connection type to use both input and output parameters in an execute sql task containing just tsql statements (no stored procedure calls). I have successfully used input parameters on their own but when i combine it with output parameters it fails on the simplest of tasks.
I would really find it beneficial if you could use the flexibility of an ADO.NET connection type as the parameter marker and parameter name can be referenced anywhere throughout the sql statement in no particular order. The addition of an output parameter would really make it great!!
Thanks
Hi all,
In a Database "AP" of my SQL Server Management Studio Express (SSMSE), I have a stored procedure "spInvTotal3":
CREATE PROC [dbo].[spInvTotal3]
@InvTotal money OUTPUT,
@DateVar smalldatetime = NULL,
@VendorVar varchar(40) = '%'
This stored procedure "spInvTotal3" worked nicely and I got the Results: My Invoice Total = $2,211.01 in
my SSMSE by using either of 2 sets of the following EXEC code:
(1)
USE AP
GO
--Code that passes the parameters by position
DECLARE @MyInvTotal money
EXEC spInvTotal3 @MyInvTotal OUTPUT, '2006-06-01', 'P%'
PRINT 'My Invoice Total = $' + CONVERT(varchar,@MyInvTotal,1)
GO
(2)
USE AP
GO
DECLARE @InvTotal as money
EXEC spInvTotal3
@InvTotal = @InvTotal OUTPUT,
@DateVar = '2006-06-01',
@VendorVar = '%'
SELECT @InvTotal
GO
////////////////////////////////////////////////////////////////////////////////////////////
Now, I want to print out the result of @InvTotal OUTPUT in the Windows Application of my ADO.NET 2.0-VB 2005 Express programming. I have created a project "spInvTotal.vb" in my VB 2005 Express with the following code:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub printMyInvTotal()
Dim connectionString As String = "Data Source=.SQLEXPRESS; Initial Catalog=AP; Integrated Security=SSPI;"
Dim conn As SqlConnection = New SqlConnection(connectionString)
Try
conn.Open()
Dim cmd As New SqlCommand
cmd.Connection = conn
cmd.CommandType = CommandType.StoredProcedure
cmd.CommandText = "[dbo].[spInvTotal3]"
Dim param As New SqlParameter("@InvTotal", SqlDbType.Money)
param.Direction = ParameterDirection.Output
cmd.Parameters.Add(param)
cmd.ExecuteNonQuery()
'Print out the InvTotal in TextBox1
TextBox1.Text = param.Value
Catch ex As Exception
MessageBox.Show(ex.Message)
Throw
Finally
conn.Close()
End Try
End Sub
End Class
/////////////////////////////////////////////////////////////////////
I executed the above code and I got no errors, no warnings and no output in the TextBox1 for the result of "InvTotal"!!??
I have 4 questions to ask for solving the problems in this project:
#1 Question: I do not know how to do the "DataBinding" for "Name" in the "Text.Box1".
How can I do it?
#2 Question: Did I set the CommandType property of the command object to
CommandType.StoredProcedure correctly?
#3 Question: How can I define the 1 output parameter (@InvTotal) and
2 input parameters (@DateVar and @VendorVar), add them to
the Parameters Collection of the command object, and set their values
before I execute the command?
#4 Question: If I miss anything in print out the result for this project, what do I miss?
Please help and advise.
Thanks in advance,
Scott Chang
Any way to disable the calendar datepicker show it does not even show up on the report?
View 2 Replies View RelatedHello,
I have a table that keeps track of users subscription and unsubscription. If a user has unsubscribed, i need to retrieve the last time the user has subscribed given the field creationdate??????
e.g
User1 Subscribed 2008/02/20
User2 Subscribed 2008/02/20
User1 Unsubscribed 2008/02/23
User1 Subscribed 2008/02/27
User2 Subscribed 2008/02/27
User1 Unsubscribed 2008/02/28
Please help!!!
Hye all,
I need help on this.
Let say my source file in excel format. Currently i'm using foreach loop to execute those source files. The problem is that , i want to retrieve a date from the source(filename) itself. i've tried using derived column. but it doesnt work.
eg: Source file name Email_Jan_05.xls, i want to grab the string JAN and 05 which later i'm going to put it in my database.
any suggestion? Thanks in advance.
Hello All,
I am new to MS SQL Server 2000. I come from a Unix/Oracle/sqlplus environment. I am having problems in my where clause when comparing an ActiveX user input date to a date from the database. Or, I think that's what my problem stems from. I have a DTS package that pulls info from a table to an Excel speadsheet. I added an ActiveX input box under Workflow Properties to prompt the user for a date. I want to pass this date into the query on the where clause to pull only those rows where the updatedate = the input date. The DTS package executes just fine but it doesn't select any rows. Can someone tell me what I'm missing. I have tried inputting the date several different ways in combination with different convert/case in the where clause. Thanks in advance for any guidance......wisa64
My ActiveX script is:
Function Main()
dim tamdate
tamdate = inputbox("Enter Date")
Main = DTSStepScriptResult_ExecuteTask
End Function
My Query is:
select consumerid, servicedatefrom, updatedate
from tbl_cs_sv_service
where convert(char(10),updatedate,101) = ?
P.S. I have a Global Variable setup under Package Properties called tamdate of type string. And, I have a parameter setup under Transform Data Task Properties called tamdate.
hi all , does SQL server able to input the date that is originally from 2/6/2004 11:07:46 AM to DD-MM-YY 06-02-04 and store in the DB. For example , this is the SQL insert query
INSERT INTO ADMIN ( ID , NAME , DATE ) VALUES ( 'A001' , 'karen' ,'2/6/2004 11:07:46 AM')
the date will automatically converted to 06-02-04 and store in DB .
Does it need to use SQL Rule or user-defined data type.
I have a table has following fields(Process, datestart,dateend,datedue,,,,)
Process datestart dateend ...
A 14.07.2017 20.07.2014
B 15.07.2014 21.07.2014
C 24.07.2014 30.07.2014
What i want when user enters from date and end date. i want to filter records which are fallen between those two input dates.
if user enters 17.07.2014 and 20.07.2014 as input range. query should show only A and B process as
A 14.07.2017 20.07.2014
B 15.07.2014 21.07.2014
I am trying to write a Stored proc to retrieve only records from my table tat do not have a DateTime value ie DateTime is NULL and for some reason simply adding a DateRemoved = NULL does not work. Can anyone please help me with solution to this issue please??? Thanks in Advance
View 3 Replies View RelatedHi,
I'm using the following code (created by Report Designer) to populate the From and To data controls in my report;
WITH MEMBER [Measures].[ParameterCaption] AS '[Check Date].[Date].CURRENTMEMBER.MEMBER_CAPTION' MEMBER [Measures].[ParameterValue] AS '[Check Date].[Date].CURRENTMEMBER.UNIQUENAME' MEMBER [Measures].[ParameterLevel] AS '[Check Date].[Date].CURRENTMEMBER.LEVEL.ORDINAL' SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , [Check Date].[Date].ALLMEMBERS ON ROWS FROM [MyCube]
The report parameters for From and To contain a first item of 'All' which I don't want. How can I remove this please?
Thanks.
I Apologize if this isn't the forum to ask this...
I have a MS Access (MDB) file with a table with 2 date fields, i want to read from a dialog on my app (on MS Visual .NET Studio 2005), here's the code I've been using do far:
Code Snippet
hr=theApp.m_cs.Open(theApp.m_ds);
if(SUCCEEDED(hr)) {
theApp.m_cs.StartTransaction();
theApp.m_cs.Commit();
CCommand< CDynamicAccessor > cmd;
CComBSTR query(_T("SELECT NumContrato, NumClie, FechaC, FechaCob, Inversion, NoCobrador, NoVendedor, Total, Plazo, Pagos FROM Contrato"));
CString string(query.m_str);
cmd.Open(theApp.m_cs,string);
hr = cmd.MoveFirst();
query=static_cast< BSTR >(cmd.GetValue(1));
CString csres(query.m_str);
this->m_numc=(int)*(query.m_str);
query=static_cast< BSTR >(cmd.GetValue(2));
m_numcte=(int)*(query.m_str);
query=static_cast< BSTR >(cmd.GetValue(3));
//m_fecc=(int)*(query.m_str);
MessageBox(csres);
theApp.m_cs.Close();
}
FechaC, FechaCob, are the two Dates I want to retrieve, but when I debug, it reads a 0 (zero) from the date fields, is there a limitation? can they be read? is there a special way to read them?
> thanks in advance!
-----
Me!
hello all
pls tell me
how can i insert, retrieve date from ASPX(vs2003) page in table in sql server 2000??
i m in trouble
pls help me
Hi
I would like to return data for working days only. This will need to exclude holidays.For eg In the Month of August we have 31 Days and every 1st day of 1st week is holiday.So my output should retrieve me 31-4=27 .
Any ideas?
Thanks...
SQL 2005 Dev
How can I do this with Parameters? I can get a single parameter to filter for a single date (or even a combo list of the dates in DB). But I want my parameters to interact so that they specify a range. Is this possible?
i need to be able to do an sql call whereby i can check the day and hour for publishing.eg select story where day = ?? AND hour = ?? any one know the best way to do this.
i need to call out date as a day number or someting and the getdate as just the hour??? anyone know how??
Below is the query in which i want to retrieve another column (exchange rate) from a particular date for the sub query.
Actually PurchaseOrderDet table get records related to purchaseorder but for each row in purchaseorderdet need info from the same table for all rows on a particular date.
how i can achieve this query without using RANK() and other functions.
"SELECT Supplier.Uniid AS SupplierID, Supplier.Name, PurchaseOrder.Uniid AS PurchaseID, PurchaseOrder.OrderNo, PurchaseOrder.FormDate, StockItem.Uniid AS StockID, StockItem.StockCode + N' - ' + StockItem.Description1 AS StockItem,
PurchaseOrderDet.ExchangeRate, PurchaseOrderDet.UnitPrice, PurchaseOrderDet.Discount, SUM(PurchaseOrderDet.OrderQty) AS SumOfOrderQty,
[Code] ....
I have to produce a report to calculate no of days based on user input start date and end date. I have tried to explain below.
say for eg: in the tables I have emp name
user 'Phani' started work from - EStart 20/11/2014EEnd 10/01/2015 - total days --datediff
within his work period he did different roles:
PhaniMarketing (prSt Date) 20/11/2014prE date (28/11/2014) Total 9 days
PhaniAdmin (prSt Date) 29/11/2014prE date (20/12/2014) Total 22 days
PhaniCRM (prSt Date) 20/12/2014prE date (10/01/2015) Total 22 days
Total days 53 Days
For this :
I calculated datediff + 1 and got sub jobs days BUT
say financial director wants to see Title of 'Sub Jobs' with 'Days' from 1st Dec to 31st Dec
so on paper I calulated as :
1-31 Dec 2014
PhaniMarketing NULL (Do not fall in Req Dt)
PhaniAdmin 20 (Deduct 2 days of Nov & calculated 20 days of Dec)
PhaniCRM 11 (Deduct 20 days of Nov and deduct 11 days of Jan so for Dec , we got 11 days)
Total days 31
HOW CAN I USE Case statement to calculate days for given start date and end date. I have to include all three totals, 1 for Job dates, 2, subjobs dates, 3 cal of days for a requested period.
I have to produce a report to calculate no of days based on user input start date and end date.
say for eg: in the tables I have emp name
user 'Phani' started work from - EStart 20/11/2014EEnd 10/01/2015 - total days --datediff
within his work period he did different roles:
PhaniMarketing (prSt Date) 20/11/2014prE date (28/11/2014) Total 9 days
PhaniAdmin (prSt Date) 29/11/2014prE date (20/12/2014) Total 22 days
PhaniCRM (prSt Date) 20/12/2014prE date (10/01/2015) Total 22 days
Total days 53 Days
for this :
[code]...
HOW CAN I USE Case statement to calculate days for given start date and end date. I have to include all three totals, 1 for Job dates, 2, subjobs dates, 3 cal of days for a requested period.