Retrieve Specific Number Of Records
Mar 5, 2008
Hi,
How to display specific number of records? That means I want to display records starting from 3th row to 5th row. Please send your suggestions or links.
Table
-----
Name Age
-----------------
Raja 23
Kumar 26
Suresh 30
Rani 22
Subha 32
Ganesh 25
The result will be
Name Age
-----------------
Suresh 30
Rani 22
Subha 32
Thanx.
GANESAN MURUGESAN
View 2 Replies
ADVERTISEMENT
Jul 20, 2005
Dear GroupI wonder whether you can give me a syntax example for a SQL Statement.Lets assume I've a table containing three columns ContactID (Primary Key),Firstname and Lastname.I would like to write a stored procedure which returns me the first tenrecords and increments an outside variable each time it runs.E.g If I run it the first time I pass the variable as 0 and it will returnme the first ten records and returns the variable value 1.When run a second time, I will pass the variable as 1 and it will return merecords 11-20 and sets the variable to 2 and so on...The difficult thing is how to tell to return me records 11-20. I can't usethe ContactID as someone might have deleted a row and e.g. ContactID 18 ismissing. In this case I only would get 9 rows returned. It always should beten.Thanks very much for your time and efforts!Kind Regards,Martin"There are 10 types of people in this world: Those that understand binaryarithmetic, and those that don't."
View 3 Replies
View Related
Apr 24, 2008
I€™m working on a database project that will ultimately contain millions of records for each lot. In addition, each lot will have up to 96 corresponding serial number records.
I would like to add a SQL parameter that would tell the database engine to only return X number of records.
For Example:
If table TBL_LOTS contains one million records I would like to limit the return set to 100 for example.
What would I need to add to the SQL command to below to restrict the data set to the first 100 records in the set of one million?
SELECT [LOT NUMBER]
FROM TBL_LOTS
WHERE [STATMENTS]
View 3 Replies
View Related
Nov 19, 2015
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015'
DECLARE @enddate date = '10-31-2015'
DECLARE @afterTime time = '17:00'
SELECT
General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
[Code] ....
View 20 Replies
View Related
Nov 2, 2006
Hello
Im searching for a solution to set all matrix row or cell the same height.
it schoud looks like this example:
This is a simple matrix
test a
text b
text c
text d
text e
text f
text g
This is a matrix with all the same row-height.
test a
text b
.
text c
.
.
text d
text e
text f
text g
.
.
Thx you a lot
View 3 Replies
View Related
Nov 20, 2007
Hye all.. ;-)Question : 1. I try to Retrieve "00012" number from SQL Database..But the Return value is "12"..Wht I need is "00012" not "12". How I gonna do that?2. Because why..I need to save again that number in another Table. I'm using Data Type as "nvarchar(50)". Thank you.
View 4 Replies
View Related
Oct 4, 2007
Let's say I have a result set (records) containing numbers such as:01239162145100101102103104105106How might someone write a procedure to get the next lowest number inthis sequence? In this case it would be: 4. Some combination ofSelect, Min & When, I am sure, but it escapes me at the moment.Thoughts? Thanks...
View 5 Replies
View Related
Apr 10, 2006
HI,
I have one master table and multiple detail tables. The primary key of the master table is an auto-increment number, which is a foreign key in those detail tables. I am wondering if SQL Server allows us to get the next available auto-increment number of the master table up front. Thanks a lot.
View 9 Replies
View Related
Feb 19, 2013
I have a large table of customers. I would like to add a column that contains an integer, unique to that customer. The trick is that this file contains many duplicate customers, so I want the duplicates to all have the same number between them.the numbers dont have to be sequential or anything, just like customers having the same one.
View 8 Replies
View Related
Aug 25, 2005
I am working on a multi-page datagrid that pulls data from a database. The issue I am running into is the SQL select query. What I have is a table to 55 items. What I need to do is grab the first 35 of those items and bind the resulting DataReader to the grid, print the page, then grab the remaining 20 items, bind to the grid and print the page.
I can use "SELECT TOP 35 FROM Table" to get the first 35 items, but I don't know how to get the remaining 20 items. Is there a way to say something like "SELECT TOP 20 FROM Table" but specify only the rows that begin after row 35?
I tried doing this with an ArrayList but couldn't bind it to the DataGrid.
Any suggestions?
View 10 Replies
View Related
May 22, 2007
hi,
I would like to create a user defined SQL function which returns the number of rows which meets certain condition, and the average value of one of the culomns. I cannot find a code example for it. Please help.
Thanks,
Dror.
View 7 Replies
View Related
Mar 13, 2008
Hi,
Im using a select statement to query out the data from a table.
ex:- select * from tblperson
Now this select statement is returning me 500 rows
I want to see only the records between 100 - 200 out of these 500 rows..
Anyone help
View 13 Replies
View Related
Apr 17, 2008
Hi All
Lets say i have that table:
Month Sales
1 30
1 10
1 10
1 20
2 30
2 30
2 15
3 1
How can i get the sum of the sales where month=1?
I need to do it in the Expression of a text box
View 7 Replies
View Related
Oct 21, 2015
I am trying to write a query that will retrieve all students of a particular class and also any rows in HomeworkLogLine if they exist (but return null if there is no row). I thought this should be a relatively simple LEFT join but I've tried every possible combination of joins but it's not working.
SELECT
Student.StudentSurname + ', ' + Student.StudentForename AS Fullname,
HomeworkLogLine.HomeworkLogLineTimestamp,
HomeworkLog.HomeworkLogDescription,
ROW_NUMBER() OVER (PARTITION BY HomeworkLogLine.HomeworkLogLineStudentID ORDER BY
[Code] ...
It's only returning two rows (the students where they have a row in the HomeworkLogLine table).Â
View 3 Replies
View Related
Jan 10, 2008
Is there any way to retrieve partial contents of a database column? For example, say a column holds 5,000 characters, but I only wish to retrieve the first 50.
Thanks
View 2 Replies
View Related
Jun 5, 2008
Hi all
I've two tables
community, community_related.
I need to get community names for comm_relatedID from community table
where comm_id = 21 , please see my tables below
Community table Community Related
commID, comm_name comm_id comm_relatedID
21 test1 21 24
22 test2 21 22
23 test3 21 26
24 test 5 21 27
26 test6
27 test7
result am trying to display from community related table after joining community table on COMM_ID = 21 is
comm_id comm_relatedID comm_name
21 24 test5
21 22 test2
21 26 test6
21 27 test7
can anybody please help..with a query, am stuck at this point.
View 1 Replies
View Related
Apr 5, 2007
hi friends,
i got a error while retrieving more than 100000 rows (records) from a table .. can any one tell me what is the maximum number of rows retrieve from a database to reports... and how can i overcome this issue...
View 3 Replies
View Related
May 16, 2013
I am trying to output a number in a specific format. I am playing with CAST() and CONVERT() but have not been able to get what I need.
Current: 0.019891
Desired: 000199
It doesn't have to remain in a number format, as i will be output to a CSV in order to bulk load into another system.
View 4 Replies
View Related
Jul 11, 2015
I have a table called Employees which has lots of columns but I only want to count some specific columns of this table.
i.e. EmployeeID: 001
week1: 40
week2: 24
week3: 24
week4: 39
This employee (001) has two weeks below 32. How do I use the COUNT statement to calculate that within these four weeks(columns), how many weeks(columns) have the value below 32?
View 3 Replies
View Related
Jan 10, 2008
Hi,
Can anybody tell me to How to get the week number of a specific Date in SQL Server 2005.
Like : say Date "03/01/2008" belongs to the 1st week of the year 2008, same way "21/02/2008" is 8th week of the year 2008.
So, the same way I need to know the week number of a given (variable) date.
I need to write / use a Function in SQL server which will return the Number (INT) (i.e. 1 or 8 or 10 etc...) against a specific (Parameter) date.
regards,
Saibal
Note : Please feel free to write me if my question is not clear.
View 5 Replies
View Related
Mar 31, 2008
I am using ADODB.Recordset to retrieve the records from an MS Access database. The table has 11450 records and the recordset shows this number as the recordcount too. But when I try to fetch the records in a While loop using EOF as the check, I am able fetch only 4000 or so records. No error occurs and no exception is thrown. Control just comes out of the function. Why could this be happening?
Does Recordset have some limit on the number of records for Jet 4.0 provider?
Any help is appreciated.
View 3 Replies
View Related
Jan 30, 2004
I'm having problems constructing a query. I need to get a count of emails in my database, but only the emails that appear 2 or more times.
Can anyone help?
Thanks!
Justine
View 4 Replies
View Related
Jul 23, 2004
Scenerio:
Its 3pm and a user comes to me and says, she's deleted an invoice with many associated items. I know the affected tables (foreign keys) and I have last nights backup of the db. However I don't want restore the entire db back from last night just the deleted invoice record/s. What is the best practice procedure for accomplishing this?
View 2 Replies
View Related
Jan 24, 2007
I have a column session_date that holds the date in the format: m/d/yyyy or m/dd/yyyy
how do I write my select statement to grab all records by a specific year?
SELECT *
FROM mytable
WHERE session_date =
Thanks for any help.
View 2 Replies
View Related
Dec 26, 2006
I am not sure where i should post this question since it falls both in Report Server and T-Sql but here goes...
I currently need to run a Report that has only specified records that the client/user wants by clicking the check in the check box next to the record they want. They can pick as many or a few of the records that want then run a report only with the records they indicated they wanted... i am thinking they will need some kind of t-sql statement either a function or temp table but i am not sure if even that...
if anyone has any ideas please reply...
Thanks,
WoFe
EXAMPLE: Instead of running a report on records 1, 2, 3, 4, 5, 6, 7, 8, 9
they would run the report on records: 2, 5, 6, 9
View 1 Replies
View Related
Sep 27, 2005
hi,
i need SP that receive 2 integers ,@NUM_ROWS and @PAGE_NUMBER,
and return the rows in that page.
for example:
SP(4,2) will return 4 rows in page number 2 .
So if i have table with 9 rows i will get rows 5-8,
the first page is rows 1-4 the second page is 5-8 and the 3 page is row 9.
i have to assume that rows can be deleted form that table.
thanks
View 3 Replies
View Related
Apr 7, 2015
I have this query
SELECT top 100 Ltrim([text]),objectid,total_rows,total_logical_reads , execution_count
FROM sys.dm_exec_query_stats AS a
CROSS APPLY sys.dm_exec_sql_text(a.sql_handle) AS b
where last_execution_time >= '2015-04-07 10:01:01.01'
ORDER BY execution_count DESC
But the result of execution count is from the first. I want to know it only one day.
View 9 Replies
View Related
Feb 6, 2008
I'll try to make this simple. I'm on SSRS 2005 and I have a report with a matrix object that has one row group and one column group. I need to switch the number format only for values where the column group has a specific value.
For example, here are the records in the table:
Customer, Type, Amount
Customer1, Revenue, -100
Customer2, Cost, 60
Customer1, Revenue, -200
Customer2, Cost, 125
By default the matrix object shows the following (the total comes from the standard subtotal on the column group):
Revenue Cost Total
Customer1 -100 60 -40
Customer2 -200 125 -75
But the users need the report to look like this, with all positives (why, oh why?! ):
Revenue Cost Total
Customer1 100 60 40
Customer2 200 125 75
I was able to use the inscope function to switch the signs of the Total numbers. But now I need to switch the signs of the Revenue column from negative to positive (and vice versa), without affecting the signs of the Cost column. It's strange to me because I CAN switch the signs for a specific row group (changing Customer1's number format, without affecting Customer2's format) using something like this:
=iif(Fields!Customer.Value = "Customer1", "($#,###.#0); $#,###.#0", "$#,###.#0; ($#,###.#0)")
But a similar expression specifying a column group value does not work, because the report seemingly doesn't recognize the value of the column group at all no matter what I do:
=iif(Fields!Type.Value = "Revenue", "($#,###.#0); $#,###.#0", "$#,###.#0; ($#,###.#0)")
The other reason why this is strange is that I've done drill-through reports off of matrix objects where specific column group values (the ones clicked on) can be passed into the drill-through report parameters. So it recognizes the column group values upon drill-through, but not for formatting?
How else can I do this? I must be missing something here. Thanks.
View 6 Replies
View Related
Jun 7, 2008
I am new to SQL, still learning.
If I want to retreive unique records for e.g. VendorName,City and State however no 2 vendors must be of the same city or state.
How can I do this?
I have used Select and distinct but that still brings unique vendornames in the same state and city. I only need one vendor per city and State.
Help!
View 4 Replies
View Related
Jan 15, 2007
Hi, All
I'm only have permition to query table data and with local sql server installed. Also, capable link server from local machine to live sql server (Blue). Getting error type when ran a query that commons: Column name or number of supplied values does not match table definition. Others, ambiguous column name " ". Here are the information below before i ran the query.
In house data:-Table fields contain (address,city,state,zip,zip4,fips)
-All data type fields are character
-No Primary Key
Local machine table:
-Fipscodes (table) contain data was provided by customer that I inserted into my machine
and column fields (state,zip,fips) made Zip as Primary Key.
So, I wants to able run a query to retrieve data from live server by using some kind of join table with table(FipsCodes)locate in my local machine.
Query Statement:
SELECT h.lname,h.fname,h.street,h.city,h.state,h.zip,h.zip4,h.carroute,h.gender,
h.keycode,h.purprice,h.mortamt,h.phone,h.lender,h.recorddate,h.fips,h.pubmonth,
h.pubday,h.pubyr,h.trantype,h.condocode,h.transdate,h.ratetype,h.loantype,h.birth,
h.heritage,h.estcurrval,h.estcurreq,h.dpbc,n.state,n.fips
FROM blue5.Homeowner.dbo.homeowners AS h INNER JOIN FipsCodes AS n
ON h.FIPS = n.FIPS
WHERE state ='AL' AND fips='001' AND pubDate >= '12/1/2006' AND pubDate <='1/8/2007'
Error occur:
Msg 209, Level 16, State 1, Line 1
Ambiguous column name 'State'.
Server: Msg 209, Level 16, State 1, Line 1
Ambiguous column name 'FIPS'.
, please help me solve this issue and thank you very much everyone.
View 8 Replies
View Related
Jul 20, 2005
Hello,If I run an action SP from MS Access using ADO:...cmd.executewhere the SP is something like Create...Update tbl1 set fld1 = 'something' where...how can I retrive the count of records affected like from Queryanalyzer?Thanks,Rich*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 5 Replies
View Related
Dec 18, 2006
Hi all,
I have a report which is grouped by a field called R_ID, which gives me a list of records for each R_ID. So here is the thing, I want to get only top 3 records for each R_ID. Is there any way to do this thing in the report level. I tried it from the query level, but the result is not like what I wanted.
Please let me know if some body has any idea.
Thx.
View 1 Replies
View Related
Nov 28, 2007
I want to write a sql Query which retrieves the last (some number ) records form a Table ,
the table specification is like :
Table1
==================================
ID int , <----- is identity And identity seed =1
Title char(50) ,
News nvarchar(100)
its like I want to get the last 5 news form DB ...
View 5 Replies
View Related
