Hi.
I have a stored procedure "sp1" which returns a value (with the sql statement Return @ReturnValue).
Is it possible for my asp.net page to retrieve this return value, and to do it declaratively (meaning without writing code to connect to the database in the code behind). If it is possible to do it like this please tell me how, and if not please tell me how to do it with code.
Thanks in advance .
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have created the following stored procedure and tried to retrieve it's output value in C#, however I am getting exceptions. Can anyone tell me what I am doing wrong? Thanks! 1 ALTER PROCEDURE [dbo].[GetCustomerById]
2
3 @CustId NCHAR(5),
4 @CustomerName NVARCHAR(50) OUTPUT
5
6 AS
7 BEGIN
8
9 SELECT @CustomerName = ContactName
10 FROM Customers
11 WHERE CustomerId = @CustId
12
13 END
14
15 RETURN
16
17
18
19
20
21
22 SqlConnection conn = GetConnection(); //retrieves a new SqlConnection
23 SqlCommand cmd = new SqlCommand();
24 cmd.Connection = conn;
25 cmd.CommandType = CommandType.StoredProcedure;
26 cmd.CommandText = "GetCustomerById";
27
28 SqlParameter paramCustId = new SqlParameter();
29 paramCustId.ParameterName = "@CustId";
30 paramCustId.SqlDbType = SqlDbType.NChar;
31 paramCustId.Direction = ParameterDirection.Input;
32 paramCustId.Value = "ALFKI";
33
34 SqlParameter paramCustomerName = new SqlParameter();
35 paramCustomerName.ParameterName = "@CustomerName";
36 paramCustomerName.SqlDbType = SqlDbType.NVarChar;
37 paramCustomerName.Direction = ParameterDirection.Output;
38
39 cmd.Parameters.Add(paramReturn);
40 cmd.Parameters.Add(paramCustId);
41 cmd.Parameters.Add(paramCustomerName);
42
43 conn.Open();
44 SqlDataReader reader = cmd.ExecuteReader();
45
46 string custName = cmd.Parameters["@CustomerName"].Value.ToString();
Hi,
For a particular application i retrieve records using stored procedure and bind the same to the data grid and display the same. The data are fetched from a table say A joined with couple of tables to staisfy the requirement. Now this table A has around 3700000 + records. The Select statement is as
Select column1, column 2, column 3...................... column 25
from table A
inner join hash table D
on A.Column3 = D.Column3
and A.Column4 = D.Column4
and a.nColumn1 = @ParameterVariable
Inner join table B
on a.nColumn1 =b.nColumn1
inner join table C
on A.column2 = C.column2
Indices defined on A are
IDX1 : Column 3, Column 4
IDX2 : Column 1
Around 350 records per second are inserted into the table A during the peak operation time. During this time when executing the procedure, it takes around 4 mins to fetch just 25000 records.
I need to fine tune the procedure. Please suggest me on same.
Thanks
Hi,
I'm at my wit's end with this. I have a simple stored procedure:
PROCEDURE [dbo].[PayWeb_getUserProfile] ( @user_id_str varchar(36), @f_name varchar(50) OUTPUT)AS
BEGINDECLARE @user_id uniqueidentifier;
SELECT @user_id = CONVERT(uniqueidentifier, @user_id_str);
select @f_name=f_name FROM dbo.tbl_user_profile WHERE user_id = @user_id;
ENDRETURN
The proc runs perfectly from the Management Console. In my ASP.net form (C#), the following always results in: "Invalid attempt to read when no data is present." (I'll highlight the line where the error results):
SqlConnection conn = new SqlConnection(<connection string data>);SqlDataReader reader;
SqlCommand comm = new SqlCommand("dbo.PayWeb_getUserProfile", conn);comm.CommandType = System.Data.CommandType.StoredProcedure;
SqlParameter f_name = new SqlParameter("@f_name", SqlDbType.VarChar, 50);
f_name.Direction = ParameterDirection.Output;comm.Parameters.Add(f_name);
comm.Parameters.Add("@user_id_str", SqlDbType.VarChar, 36).Value = Membership.GetUser().ProviderUserKey.ToString().ToUpper();reader = comm.ExecuteReader();Response.Write("Num: " + reader["@f_name"].ToString()); // ERROR: Invalid attempt to read when no data is present.
reader.Close();conn.Close();
The data is there. When I put a watch on 'Reader', I see the correct first_name data there.
Your help is appreciated.
Lets say I have the following stored procedure
Code:
Hi i have the following stored procedure which should retrieve data, the problem is that when the user enters a name into the textbox and chooses an option from the dropdownlist it brings back duplicate data and data which should be appearing because the user has entered the exact name they are looking for into the textbox. For instance
Pmillio Jones
Pmillio Jones
Pmillio Jones
Robert Walsh
Here is my stored procedure;
ALTER PROCEDURE [dbo].[stream_UserFind]
-- Add the parameters for the stored procedure here
@userName varchar(100),
@subCategoryID INT,@regionID INT
AS
SELECT DISTINCT SubCategories.subCategoryID, SubCategories.subCategoryName,
Users.userName ,UserSubCategories.userIDFROM Users INNER JOIN UserSubCategoriesON
Users.userID= UserSubCategories.userIDINNER JOIN
SubCategories ON UserSubCategories.subCategoryID = SubCategories.subCategoryID WHEREuserName LIKE COALESCE(@userName, userName) OR
SubCategories.subCategoryID = COALESCE(@subCategoryID,SubCategories.subCategoryID);
Is there a way to retrieve the parameter list for a given stored procedure?
I am trying to create a program that will autogenerate a list of stored procedures and their parameters so that changes to the database can be accurately reflected in code.
Thanks,
Allen K.
Hello all,
We have a domain where all computers are on GMT(Greenwitch Mean Time). We have an access front end that timestamps certain fields according to the client time that the program is running on, but we will be moving our client workstations off of GMT time and keep our SQL Server on GMT time, and want to keep the timestamps GMT.
So, I wanted to know if it was possible to create a stored procedure that gets the Server's time and returns it to the Access frontend for entry into the timestamp fields?
Or, if anyone has a better idea of how to get the time from the server to use on the clients, I would greatly appreciate it!!!
Kevin Kraus
Please excuse me if this question has been asked before; I couldn’t find it. Perhaps someone could point me to the solution.
A few years ago I wrote an order-entry application in classic ASP that I am now re-writing in ASP.NET 2.0. I am having very good success however I can’t figure out how to retrieve data from a stored procedure.
I am using the FormView & SqlDataSource controls with a stored procedure to insert items into an order. Every time an item is inserted into the order the stored procedure does all kinds of business logic to figure out if the order qualifies for pricing promotions, free shipping, etc. If something happens that the user needs to know about the stored procedure returns a message with this line (last line in the SP)
SELECT @MessageCode AS MessageCode, @MessageText AS MessageText
I need to retrieve both the @MessageCode and the @MessageText values in my application. In classic ASP I retrieved these values by executing the SP with a MyRecordset.Open() and accessing them as normal fields in the recordset.
In ASP.NET I have specified the SP as the InsertCommand for the SqlDataSource control. I have supplied all the parameters required by my SP and told the SqlDataSource that the insert command is a “StoredProcedure�. Everything actuly works just fine. The items are added to the order and the business logic in the SP works fine. I just have no way of telling the user that something important has happened.
Does anyone know how I can pickup these values so that I can show them to my users? Bassicly if @MessageCode <> 0 I want to show @MessageText on the screen.
I'm generating a list of parameters needed by stored procedures, and
I'd like to know which ones have default values assigned to them.
To retrieve the parameter information I use:
sp_sproc_columns @Procedure_Name='InsertUser''
However, the column that is supposed to give the default value,
'COLUMN_DEF' always returns as NULL, even when that column has a
default value assigned to it.
i.e.
CREATE PROCEDURE InsertUser@UserID INT = 10,.....
And then if I do a sp_sproc_columns @Procedure_Name='InsertUser'', the COLUMN_DEF value for the @UserID column is still NULL.
Does anyone know what I'm doing wrong and how I can retrieve the default value?
Thanks
Hello!I use a procedure to insert a new row into a table with an identitycolumn. The procedure has an output parameter which gives me theinserted identity value. This worked well for a long time. Now theidentity value is over 700.000 and I get errors whiles retrieving theinserted identitiy value. If I delete rows and reset the identityeverything works well again. So I think it is a data type problem.My Procedure:create procedure InsertProduct@NEWID int outputasbeginset nocount oninsert into PRODUCT(D_CREATED)values(getdate()+'')set nocount offselect @NEWID = @@IDENTITYendMy C# code:SqlCommand comm = new SqlCommand("InsertProduct", sqlCon);comm.CommandType = CommandType.StoredProcedure;comm.Parameters.Add(new SqlParameter("@NEWID",System.Data.SqlDbType.Int)).Direction =System.Data.ParameterDirection.Output;try{SqlDataReader sqlRead = comm.ExecuteReader();object o = comm.Parameters["@NEWID"].Value;//...}catch ( Exception ex ){throw ex;}The object o is alwaya System.DbNull. I also tried to use bigint.Any hints are welcomeCiaoSusanne
View 3 Replies View RelatedSeems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedI have a stored procedure that selects the unique Name of an item from one table.Â
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
Hi guys I know this is a really common question, and I have read loads of replies on it but everything I try does not work. I have written a small stored procedure in SQL server to upload images to a table and return the new ID using scope_identity. I have tested it and it works fine. here it is:******* @siteID numeric(18,0), @imgNum numeric(18,0), @title NVarchar(50), @MIMEtype nchar(10), @imageData varbinary(max)ASBEGINSET NOCOUNT ONdeclare @imageID intINSERT INTO [site_images] ([img_siteID], [img_num], [img_title], [img_MIME], [Img_Data]) VALUES (@siteID, @imgNum, @Title, @MIMEType, @ImageData) SET @imageID = SCOPE_IDENTITY()RETURN @imageIDSET NOCOUNT OFF************If I run this in management studio express it runs fine and returns the ID under 'return value'. The problem I have is trying to actually call that return value in VB. If I try using these lines:Dim returnParam As SqlParameterreturnParam = New SqlParameter("@imageID", SqlDbType.UniqueIdentifier)returnParam.Direction = ParameterDirection.OutputcmdTest.Parameters.Add(returnParam)withcnBKTest.Open()cmdTest.ExecuteNonQuery() imageIDparam = returnParam.value.toStringcnBKTest.Close() I get the error "procedure has too many arguments specified"And if I try to access the return value like this: imageIDparam = cmdTest.Parameters("@return_value").ValueI get the error "@return_value is not contained by this sqlparametercollection" What am I doing wrong? Any help would be greatly appreciated. Robsa
View 3 Replies View RelatedI have written this stored procedure but I get no return value (neither 0 nor 1). What I hope is when the transaction successful, return value 1. If fails, return value 0.1 set @TransactionOk = 0
2
3 BEGIN TRAN
4
5 UPDATE WhiteList_IMEI SET WhiteList_IMEI_Used = 1, Whitelist_IMEI_UsedDate = getdate()
6 WHERE WhiteList_IMEI_Code = @IMEICode_New
7
8 IF @@ERROR <> 0
9 BEGIN
10 ROLLBACK TRAN
11
12 PRINT ('Error. Contact Software Engineer.')
13 RETURN
14 END
15
16 COMMIT TRAN
17 set @TransactionOk = 1
Hi,
I have been trying to this this for quite a while with no joy can someone please tell me the error of my ways. I am trying to add a new record by stored procedure, this I can do, but my problem lies with the returnvalue part of the procedure. I cannot get it to work. When I debug it tells me that the "Specified cast is not valid" see C# code as i comment the line where it errors. I enclose a sample stored procedure and its c# code. Please can someone tell me where I am going wrong? as this is annoying me alot
SQL:create procedure SPUAddVehicleInsert
@VehicleDetailsRegistrationNumber varchar(50),
@VehicleDetailsMake varchar(50),
@VehicleDetailsModel varchar(50),
@NID bigint =null
as
insert into tblvehicledetails
(
VehicleDetailsRegistrationNumber,
VehicleDetailsMake,
VehicleDetailsModel,
)
values
(
@VehicleDetailsRegistrationNumber,
@VehicleDetailsMake,
@VehicleDetailsModel,
);
select @NID = scope_identity();c# code on sqldatasource: protected void dsAddVehicle_Inserted(object sender, SqlDataSourceStatusEventArgs e)
{
Int64 VID = (Int64)e.Command.Parameters["NID"].Value; //errors with specified cast is invalid
Response.Redirect("details.aspx?VID=" + VID.ToString());
}
protected void dsAddVehicle_Inserting(object sender, SqlDataSourceCommandEventArgs e)
{
SqlParameter p = new SqlParameter("NID", SqlDbType.BigInt);
p.Direction= ParameterDirection.ReturnValue;
e.Command.Parameters.Add(p);
}
sql datasource:<asp:SqlDataSource ID="dsAddVehicle" runat="server" ConnectionString="<%$ ConnectionStrings:National %>"
InsertCommand="SPUAddVehicleInsert" InsertCommandType="StoredProcedure" SelectCommand="SPUAddVehicleSelect"
SelectCommandType="StoredProcedure" OnInserted="dsAddVehicle_Inserted" OnInserting="dsAddVehicle_Inserting">
<InsertParameters>
<asp:Parameter Name="VehicleDetailsRegistrationNumber" Type="String" />
<asp:Parameter Name="VehicleDetailsMake" Type="String" />
<asp:Parameter Name="VehicleDetailsModel" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
I have a stored procedure that returns an integer value, declared as:Public Function MyProc(..) As Int32 . . Return <integer>End FunctionI return an integer value, and can do this and get the value returned from the method, as such:declare @rc intexec @rc = dbo.MyProc <params>select @rcThis returns the value; how do I return the value to code and get the value; I've been debugging and that is my problem, I can't get the value to return.Thanks a lot.
View 2 Replies View RelatedHello all of members, I have written a Stored Procedure.that creates a new account and then returns a value witch displays a result to me.if result is 1 "Username already exists" or 2 "E-Mail already exists".I did it with "Return" instruction.But, I don't know how can I get the returned value in ASP.NET(VB.NET)? Please help me. Thanks in advance
View 3 Replies View RelatedHi all,Is there anyway to get a returned value from a called Stored Procedure from within a piece of SQL? For example, I have the following code...DECLARE @testval AS INTSET @testval = EXEC u_checknew_dwi_limits '163'IF (@testval = 0)BEGIN PRINT '0 Returned'ENDELSEBEGIN PRINT '1 Returned'END...which
as you can see calls a SP called 'u_checknew_dwi_limits'. This SP
(u_checknew_dwi_limits) actually returns a value (1 or 0), so I want to
assign that value to the '@testval' variable (as you can see in my
code) - but Query Analyser is throwing an error at me. Is this the
correct way to do this?ThanksTryst
I have a Stored procedure (sql 2000), that inserts data into a table. Then, I add this, at the end: Return Scope_Identity()
I have the parameters for the sProc defined and added to the Command, but I'm having a really lousy time trying to figure out how to get the return value of the Stored PRocedure. BTW - I'm using OleDB instead of SQL due to using a UDL for the connection string.
I have intReturn defined as an integer
I've tried :Dim retValParam As OleDbParameter = cmd.Parameters.Add("@RETURN_VALUE", OleDbType.Integer)retValParam.Direction = ParameterDirection.ReturnValueintReturn=cmd.Parameters("@RETURN_VALUE").Value
whenever I add this section - I get an error that there are too many arguments for the sProc.
I've tried:intreturn=cmd.ExecuteNonquery - tried adding a DataReader - using ExecuteScalar - I've tried so many things and gotten so many errors - I've forgotten which formations go with which errors.
What is the best way to do this in the code part (VB.Net)?
Thanks ahead of time
I don't know whey this code does not return the values when I run it in sql server 2005 manager.set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[usp_usr_Add]
@FName nvarchar(30),
@LName nvarchar(30),
@UserName nvarchar(20),
@Password nvarchar(20),
@Email nvarchar(50),
@Country nvarchar(2),
@AIM nvarchar(10)
AS
SET NOCOUNT ON
BEGIN
DECLARE @usrID int
DECLARE @usrEmail int
SELECT @usrID = NULL
SELECT @usrEmail = NULL
SELECT @usrID = usrID FROM usr WHERE usrName = @UserName
IF (@usrID IS NOT NULL )
BEGIN
RETURN 1
END
SELECT @usrEmail = usrID FROM usr WHERE usrEmail = @Email
IF (@usrEmail IS NOT NULL)
BEGIN
RETURN 2
END
INSERT INTO usr (usrFName, usrLName, usrName, usrPassword, usrEmail, usrCountry, usrAIM, usrJoinDt)
VALUES (@FName, @LName, @UserName, @Password, @Email, @Country, @AIM, GetDate())
RETURN 0
END
When i run this code i executes fine except when the two conditions become true they do not return thier values, nor does it return 0 when it inserts a row.
Hi
I have the following stored procedure which when exectuted within the Query Analyzer adds a record and returns the @SeqRunNo value. However when I call
it in the from ado the record is added but the value is empty.
I enter the parameter as:
.Parameters.Append .CreateParameter("@SeqRunNo", adVarChar, adParamOutput, 4)
and try and access it as:
SeqRunNo = oCommand.Parameters("@SeqRunNo").Value
Any ideas?
Thanks.
john
CREATE PROCEDURE up_mix_Set_Seq_Run_No
@IID int,
@TrackingID int,
@ADP_Code varchar(6),
@ClientID varchar(20),
@SeqRunNo varchar(4) OUTPUT
AS
DECLARE @Max_Seq_No int,
@Seq_No varchar(4),
@LastUpdate datetime
SELECT @Seq_No = QTR_SEQ_RUN_NO FROM Transmission_Quarter
WHERE IID = @IID
AND Tracking_ID = @TrackingID
AND ADP_Code = @ADP_Code
IF ISNULL(@Seq_No,0) = 0
BEGIN
SET @LastUpdate = GETDATE()
SELECT @Max_Seq_No = CAST(MAX(QTR_SEQ_RUN_NO) AS int)
FROM Transmission_Quarter
WHERE IID = @IID
AND ADP_Code = @ADP_Code
IF ISNULL(@Max_Seq_No,0) = 0
BEGIN
SET @SeqRunNo = '0001'
END
ELSE
BEGIN
IF @Max_Seq_No = 9999
BEGIN
SELECT @SeqRunNo = '0001'
END
ELSE
BEGIN
SELECT @SeqRunNo = REPLICATE('0', 4 - DATALENGTH(CAST(@Max_Seq_No AS VARCHAR))) + CAST((@Max_Seq_No + 1) AS VARCHAR)
END
END
INSERT INTO Transmission_Quarter
(IID, Tracking_ID, QTR_SEQ_RUN_NO, ADP_Code, Last_Updated_By, Last_Updated_Date)
VALUES
(@IID, @TrackingID, @SeqRunNo, @ADP_Code, @ClientID, @LastUpdate)
END
ELSE
BEGIN
SELECT @SeqRunNo = @Seq_No
END
GO
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
Hello Newsgroup !My Tools are:Windows 2000, VBA(Access 2000) and MS SQL Server 7.0I wrote in an *.adp project (Access 2000) a Stored Procedure "xyz"with parameters a,bIn my VBA Code i wrote:Dim par As New ADODB.ParameterCmd.CommandType = adCmdStoredProcCmd.CommandText = "[prcSucheUNRWIAEStichtag]"Set par = Cmd.CreateParameter("@a", adInteger)Cmd.Parameters.Append parSet par = Cmd.CreateParameter("@b", adVarChar, adParamInput, 5)Cmd.Parameters.Append par........Cmd.Parameters(0) = aCmd.Parameters(1) = bSet rsTemp = Cmd.ExecuteNow my Problem is the following:there is an error in the stored procedure and i want to use something likethis:if @idontknow = '000000000'Beginreturn(1) -- Something <>0endHow can i use this return value in my VBA code ? Maybe i should ask thisquestion in an other Newsgroup. Pleaselet me know in which oneGreetingsFrank
View 2 Replies View RelatedIn one of my SSIS jobs I have an 'Execute SQL Task' which is calling a stored procedure. This SP returns 0 or 1, if the SP returns 1 the package needs to stop executing. Is there a way to get the value that is returned from the SP and either continue or stop the job from continuing to run?
so if value is 0 it goes to the next step, if its 1 it stops running
Greetings All,
I am a newbie to SSIS and need some help. I need to get the return value from a stored procedure into a SSIS variable. I'm assuming I would use an OLE DB Command but I havn't a clue on how to capture the return value. Can someone get me started on how I can do this?
Note, the return value is actually an identity of the inserted value. I need this value in my data flow for further processing.
Thanks is advance!
I am have stored procedure that accepts one parameter and returns a single value
The sp works fine.
My question is how do I set the c# webpage to return the single value.
I need a specific example of how to code.
this is how the code should work.
A blank form is loaded, when the user clicks submit I need the code to pull the Login name from the text box and check to see if it exist. I have the sp working the way I need it to. But I can figure how to pull the single value into a variable in the code behind.
I am using dataset elsewhere on the site, so I created a ds the calls the sp. Can it work this way?
thanks,
Hi AllHere is my SPALTER PROCEDURE dbo.InsertPagerDays @ReportEndDate datetime, @PagerDays int,@UserID varchar(25)ASIF EXISTS(-- you cannot add a pager days more than once per report dateSELECT ReportEndDate, UserId from ReportPagerDays where ReportEndDate = @ReportEndDate and UserId = @UserID)Return 1 elseSET NOCOUNT OFF;INSERT INTO [ReportPagerDays] ([ReportEndDate], [PagerDays], [UserID]) VALUES (@ReportEndDate, @PagerDays, @UserID)RETURNMy Question is, this SP will not let you enter in a value more than once (which is what i want) but how do I write my code to inform the user? Here is my VB code becuase the SP does not error out (becuase it works it acts as if the record updates)How can I catch the Return 1'set parameters for SPDim cmdcommand = New SqlCommand("InsertPagerDays", conn)cmdcommand.commandtype = CommandType.StoredProcedurecmdcommand.parameters.add("@ReportEndDate", rpEndDate)cmdcommand.parameters.add("@PagerDays", PagerDays)cmdcommand.parameters.add("@UserId", strUserName)Try'open connection hereconn.Open()'Execute stored proccmdcommand.ExecuteNonQuery()Catch ex As Exceptionerrstr = ""'An exception occured during processing.'Print message to log file.errstr = "Exception: " & ex.Messagelblstatus.ForeColor = Drawing.Color.Redlblstatus.Text = "Exception: " & ex.Message'MsgBox(errstr, MsgBoxStyle.Information, "Set User Report Dates")FinallyIf errstr = "" Thenlblstatus.ForeColor = Drawing.Color.Whitelblstatus.Text = "Pager Days Successfully Added!"End If'close the connection immediatelyconn.Close()End Try
View 1 Replies View RelatedI have the following stored procedure for SQL Server 2000: SELECT a.firstName, a.lastName, a.emailfrom tbluseraccount ainner join tblUserRoles U on u.userid = a.useridand u.roleid = 'projLead' Now, this is not returning anything for my dataset. What needs to be added?Here is the code behind:Dim DS As New DataSetDim sqlAdpt As New SqlDataAdapterDim conn As SqlConnection = New SqlConnection(DBconn.CONN_STRING)Dim Command As SqlCommand = New SqlCommand("myStoredProcdureName", conn)Command.CommandType = CommandType.StoredProcedureCommand.Connection = connsqlAdpt.SelectCommand = CommandsqlAdpt.Fill(DS) Then I should have the dataset, but it's empty.Thanks all,Zath
View 5 Replies View RelatedThis is my SP:SELECT CAST(id AS varchar(10)) + ' - ' + UserName AS 'User List', Scanned, Scripts AS 'Total Scripts', Processed,CAST((Processed/ Scripts)* 100.0 as int) AS 'DONE (%)'FROM tblworkQueueProcessed and Scripts are both DataTypes of intMy DONE(%) column comes back with 0Any idea where I am going wrong?
View 2 Replies View Related