Hi everyone
I created a database graphically in VS2005.
Now I want the text version of those DDL(create) commands.
Question is where and how are those commands stored in SqlServer
I have the management studio too.
Any ideas??
I'm building a simple webform, except Visual Studio and my service provider have combined to drive me nutty.
First, I MUST use an ODBC connection to my remote SQL Server do to some unknown configuartion problem. I've been playing with Visual Studio for only a month, so normally when something goes wrong I can go look in the mirror and find the culprit. This is different. I've got a totally functional web form with a SQL Connection, but when I try to change it to an ODBC Connection, I get the following error.
An OdbcParameter with ParameterName '@CertHolder' is not contained by this OdbcParameterCollection
My coding is fine because I stole it straight from the walkthrough and it works. But the specifications that Visual Studio provide are quite suspect. Please note the failure to include some key "@" signs.
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.cmdUpdate = New System.Data.SqlClient.SqlCommand
Me.cmdGetAll = New System.Data.SqlClient.SqlCommand
Me.cmdSelect = New System.Data.SqlClient.SqlCommand
Me.OdbcConnection1 = New System.Data.Odbc.OdbcConnection
Me.OdbcGetAll = New System.Data.Odbc.OdbcCommand
Me.OdbcSelect = New System.Data.Odbc.OdbcCommand
Me.OdbcUpdate = New System.Data.Odbc.OdbcCommand
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "this works fine"
'
'cmdUpdate
'
Me.cmdUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip, CertHolder = WHERE (CertHolder = @Cert" & _
"Holder)"
Me.cmdUpdate.Connection = Me.SqlConnection1
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Name", System.Data.SqlDbType.NVarChar, 50, "Name"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address", System.Data.SqlDbType.NVarChar, 50, "Address"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Address2", System.Data.SqlDbType.NVarChar, 50, "Address2"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@City", System.Data.SqlDbType.NVarChar, 50, "City"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@State", System.Data.SqlDbType.NVarChar, 50, "State"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Zip", System.Data.SqlDbType.NVarChar, 50, "Zip"))
Me.cmdUpdate.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))
'
'cmdGetAll
'
Me.cmdGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.cmdGetAll.Connection = Me.SqlConnection1
'
'cmdSelect
'
Me.cmdSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE (CertHolder = @CertHolder)"
Me.cmdSelect.Connection = Me.SqlConnection1
Me.cmdSelect.Parameters.Add(New System.Data.SqlClient.SqlParameter("@CertHolder", System.Data.SqlDbType.NVarChar, 50, "CertHolder"))
'
'OdbcConnection1
'
Me.OdbcConnection1.ConnectionString = "This works fine"
'
'OdbcGetAll
'
Me.OdbcGetAll.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData"
Me.OdbcGetAll.Connection = Me.OdbcConnection1
'
'OdbcSelect
'
Me.OdbcSelect.CommandText = "SELECT CertHolder, Name, Address, Address2, City, State, Zip FROM InsuranceData W" & _
"HERE CertHolder = @CertHolder"
Me.OdbcSelect.Connection = Me.OdbcConnection1
Me.OdbcSelect.Parameters.Add(New System.Data.Odbc.OdbcParameter("CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, "CertHolder"))
'
'OdbcUpdate
'
Me.OdbcUpdate.CommandText = "UPDATE InsuranceData SET Name = @Name, Address = @Address, Address2 = @Address2, " & _
"City = @City, State = @State, Zip = @Zip WHERE CertHolder = @CertHolder"
Me.OdbcUpdate.Connection = Me.OdbcConnection1
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Name", System.Data.Odbc.OdbcType.NVarChar, 50, "Name"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address", System.Data.Odbc.OdbcType.NVarChar, 50, "Address"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Address2", System.Data.Odbc.OdbcType.NVarChar, 50, "Address2"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("City", System.Data.Odbc.OdbcType.NVarChar, 50, "City"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("State", System.Data.Odbc.OdbcType.NVarChar, 50, "State"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Zip", System.Data.Odbc.OdbcType.NVarChar, 50, "Zip"))
Me.OdbcUpdate.Parameters.Add(New System.Data.Odbc.OdbcParameter("Original_CertHolder", System.Data.Odbc.OdbcType.NVarChar, 50, System.Data.ParameterDirection.Input, False, CType(0, Byte), CType(0, Byte), "CertHolder", System.Data.DataRowVersion.Original, Nothing))
I NEVER EVER TYPED ORIGINAL_CERTHOLDER IN THE SQL PREPARATION
End Sub
Protected WithEvents btnSave As System.Web.UI.WebControls.Button
Protected WithEvents SqlConnection1 As System.Data.SqlClient.SqlConnection
Protected WithEvents ddlCertHolder As System.Web.UI.WebControls.DropDownList
Protected WithEvents txtName As System.Web.UI.WebControls.TextBox
Protected WithEvents txtAddress As System.Web.UI.WebControls.TextBox
Protected WithEvents ddlCH As System.Web.UI.WebControls.DropDownList
Protected WithEvents cmdUpdate As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdGetAll As System.Data.SqlClient.SqlCommand
Protected WithEvents cmdSelect As System.Data.SqlClient.SqlCommand
Protected WithEvents txtAddress2 As System.Web.UI.WebControls.TextBox
Protected WithEvents txtCity As System.Web.UI.WebControls.TextBox
Protected WithEvents txtState As System.Web.UI.WebControls.TextBox
Protected WithEvents txtZip As System.Web.UI.WebControls.TextBox
Protected WithEvents OdbcConnection1 As System.Data.Odbc.OdbcConnection
Protected WithEvents OdbcGetAll As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcSelect As System.Data.Odbc.OdbcCommand
Protected WithEvents OdbcUpdate As System.Data.Odbc.OdbcCommand
'NOTE: The following placeholder declaration is required by the Web Form Designer.
'Do not delete or move it.
Private designerPlaceholderDeclaration As System.Object
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Comments? Suggestions, I am not positive about how to fix this.
Ive got a List<sqlCommand> and I want to execute all the commands in it, but only using one trip to the database. I dont need any return values from any of these commands. Most of the commands are update/insert/delete. Sometimes after a insert command there may be a command "set @NEWID =identity_insert" to facilitate the next insert to a related table, but thats the only other type of command to insert/update/delete.I am using microsofts enterprise data application block. I want to execute all the commands in the list with just one trip to the database. Would the following code achieve this : db = DatabaseFactory.CreateDatabase("wlmAdmin"); foreach (SqlCommand sc in saveCommands) { db.ExecuteNonQuery(sc); }or would this make multiple trips to the database? Im not 100% on whats going on behind the db object. If I create the db Item in the constructor of my class using "db = DatabaseFactory.CreateDatabase("wlmAdmin");" would this mean that every instance of that class would maintain an open database connection throughout its scope/lifetime?Ive created the class to retrieve all data using a single stored procedure and then when saving, the class builds a List of SqlCommands which as Ive mentioned I want to execute in one trip, to make the number of trips to the database as small as possible. Because of this I don't need the db object maintain an open connection to the database all the time. However It doesnt seem to have any dispose methods so Im not clear on how it operates.In the case that the code above opens a connection for each command, how would I got about batch executing the queries in one trip?Thanks,C
View 12 Replies View Relatedis there a way using sqlexpress to review the most recent set of sql commandssubmitted to a database?I remember something about setting up logging in sql server 2000, but don'tsee much about this on google or the news group for 2005.thanksJeff Kish
View 2 Replies View RelatedI am now retrieving the PDF from the database and I am getting an error:
Error 1 'GetImages.GetImage(int)': not all code paths return a value
I have:
int imageid = Convert.ToInt32(Request.QueryString["ACTUAL_IMAGE_PDF"]);
And...
private SqlDataReader GetImage(int imageid)
{
Sql Statement...
}
Could someone help please??
Ok, again, I'm reasonably new to this. I've been trying to display an image stored in SQL in a ASP.NET page. Pretty simple stuff I would have thought. I've read countless examples of how to do this online, and many of them use the same method of displaying the image, but none seem to work for me. The problem seems to lie in the following line of code:
Dim imageData As Byte() = CByte(command.ExecuteScalar())Which always returns the error: Value of type 'Byte' cannot be converted to '1-dimensional array of Byte'.Here's the rest of my code, hope someone can help. It's doing my head in!
Imports System.Data.SqlClient
Imports System.Data
Imports System.Drawing
Imports System.IOPartial Class _ProfileEditor
Inherits System.Web.UI.PageProtected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Get the UserID of the currently logged on user Dim NTUserID As String = HttpContext.Current.User.Identity.Name.ToString
Session("UserID") = NTUserID
Dim Photo As Image = NothingDim connection As New SqlConnection(ConfigurationManager.ConnectionStrings("MyConnectionString").ConnectionString)
Dim command As SqlCommand = connection.CreateCommand()
command.CommandText = "SELECT Photograph, ImageType FROM Users WHERE UserID = @UserID"command.Parameters.AddWithValue("@UserID", NTUserID)
connection.Open()Dim imageData As Byte() = CByte(command.ExecuteScalar())Dim memStream As New MemoryStream(Buffer)
Photo = Image.FromStream(memStream)
End Sub
End Class
Dear Friends,
I have read many solution over the net, but since I am unable to utilize anyone according to my needs I am seeking help from you people.
I have a table imagedata in sql server 2005 having fields name and imageperson. Name is string and imageperson is Image field. I have successfully stored name of the person and his image in database.
I have populated the dataset from codebehind and bind it to the repeater.
By writing <%# DataBinder.Eval(Container.DataItem, "name")%>I am a able to retrieve the name of the person. But when I pass photodata as
<%#photogen((DataBinder.Eval(Container.DataItem, "imageperson")))%>
where photogen is function in code behind having structure
public void photogen(byte[] dataretrieved)
{
Response.BinaryWrite(datarerieved)
}
But it is giving error at <%#photogen((DataBinder.Eval(Container.DataItem, "imageperson")))%>
The best overloaded method match for '_Default.photogen(byte[])' has some invalid arguments
AND
Cannot convert object to byte[].
Can anyone please provide me working solution with code for aspx page and code behind.
Thanks and regards
VWD 2005 Express. I need to retrieve a value from a SQL database from the code behind a page and assign it to a variable. In Microsoft Access I can do this using the DLookup function. What I need to do is get the data that results from the following query into a variable:
SELECT [SystemUserId] FROM [SystemUser] WHERE ([Username] = @Username)
The name of the data source is SqlDataSource2
Also, in Access I can create a recordset from a query and then process through the recordset. Can that be done in VB code in VWD 2005 Express?
Hi.
I've been traling the forum and the internet for a striaghtr forward solution on this.
I'm trying to do what loads of people have already achieved: retrive images from an SQL database.
I have successfully uploaded inages to an "iamges" table, storing the image as SQL type "image", also storing size, type, description, name etc.
I want to be able to read one or more of these images (and other data) back from the table.
I'm using C#, ASP NET 2.0, SQL,
Any examples I've found needed a lot of tweaking, and for some reason or other didn't work!
Please don;t just pose yet another URL to an example - I've probably tried it and failed already.
I don't mind if I display the images in a GridView or just within an aspx page.
Ideally I'd be able to dispaly a few images on a page.
I know how to read and display the rest of the data in the "images" table.
Can anyone help please?
Do you need more info?
Thanks in advance,
Garrett
hi,
I have a SQL database that has Images stored. I am able to read the image from the database and display it. But i am not able to control the size and the position where it is displayed. I want to develop something like a photo album. the images should be displayed in a smaller size. but when the user clicks on the image, it should blow up to its original size.
I am struggling with this for some time. Any suggestions as how to develop it??.
Any help in this regard would be highly appreciated.
thanks,
-sriram
hello
i want to know if there is any way to retrieve all the tables for a Database programmatically.
i want to connect to a server and select a database .then by selecting the database all it's tables be loaded into a ComboBox(for example)..the tables name i mean.
i want to give the user the option to select a table from a database.if it is possible help me
my programming language is C#.Net
any information is appereicated
Somayeh
Hi, I've been trying to write an sql statement that can output the 10 minimum entries from a database, but I can't figure out how to do it.
Any help?
Hi all,
I am working on a project on PocketPC in which it is required to reteive data from database. I have created database on simulator as .sdf file. I want to retreive data from eVC++ code. How i can do so?
thanx
Heres my requirement from a financial analysis im doing...I have just calculated an industry averages on financial ratios...Now i wanna upload this industry average to the system...so that I can compare it to the individual companies' averages after calculating a particular company's average; meaning i wanna be able to call the industry average of a particular ratio (eg Current Ratio) after calculating a company's corresponding ratio...Is there a code fragment i can use for this ?? Thanks in advance...Adam
View 1 Replies View RelatedHi,
I want to get information about all the indexes in a database.
Can any one suggest me a query for this.
Thanks.
hi,
here i had created a database named "books" and it contains 8tables in sql server 2005. now i want to take a copy of this "books" database in another system which also have sql server2005 as a back end to asp.net. so where i can get this "books". i.e in which folder it will be saved. is it possible to svae this databse or have to svae each queries by which i created tables?
One can never consent to creep,when one feels an impulse to soar
RAMMOHAN
I've played with various configurations of the MS SQL Server encryption functionality, and come across an embarrassingly easy question that I cannot seem to resolve. How do I retrieve the actual symmetric and asymmetric keys out of the database?
I'd like to explore the possibility of off-loading the encryption/decryption work from the database server to a load-balanced pool of servers. For this model to work the pool would need access to the keys. The symmetric keys currently are generated with the command...
create symmetric key EncryptionKey211
with algorithm = AES_256
ENCRYPTION BY certificate CreditCardCert
Am I missing something obvious here?
I have inherited a database and with it a set of triggers that are 'apparently' installed. However I have a number of different 'versions' for a specific update trigger and it is not clear from the files which is the latest, hence I am unsure of what 'version' of the trigger is installed in the database itself.
I am trying to retrieve the trigger code from the databse so that i can correctly determine which one of my trigger files is the latest version.
I don't want to end up in a situation where an earlier version of the update trigger is installed as this could wreck the underlying data.
I have tried using the syscomments.text column that relates to the trigger but it only gives me a concatenated version of the sql code and not enough to determine which file version was used for the trigger.
Is there a way of retreiving the entire SQL code that was entered rather than just the first few lines?
OK, this is the scenario. I have a database with many columns ( each a mean value and a standard deviation, and with it a set of coordinates that i want to retrieve ).
Then i have a value that i want to query with the database, by comparing it with the mean and its standard deviation, and it should return a few sets (lets say 2) of coordinates whereby the the value of the mean is closet to the one in the database, in order of nearest value. How should i do it, since i am not using the exact value of the mean in the database?
I know its a bit confusing the way i wrote, but anyone understand wat i am trying to say and can help, i am very grateful. I had googled around for answers but cannot find. Thanks.
well i have got a form which displays some result from the databasse, it runs fi9 in webmatrix, but when i try to run it from my main page and when i click on that button which should displays the aspx page, it gives me this error:
############################################################
Server Error in '/' Application.
--------------------------------------------------------------------------------
Login failed for user 'MUFADDALASPNET'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'MUFADDALASPNET'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException: Login failed for user 'MUFADDALASPNET'.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +472
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372
System.Data.SqlClient.SqlConnection.Open() +384
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +44
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +36
Microsoft.Matrix.Framework.Web.UI.SqlDataSourceControl.PopulateDataSet(DataSet dataSet, String listName) +494
Microsoft.Matrix.Framework.Web.UI.SqlDataSourceControl.GetDataSource(String listName) +51
Microsoft.Matrix.Framework.Web.UI.DataBoundControl.ResolveDataSource() +95
Microsoft.Matrix.Framework.Web.UI.DataBoundControl.DataBind() +59
Microsoft.Matrix.Framework.Web.UI.MxDataGrid.DataBind() +10
Microsoft.Matrix.Framework.Web.UI.MxDataGrid.OnPreRender(EventArgs e) +62
System.Web.UI.Control.PreRenderRecursiveInternal() +62
System.Web.UI.Control.PreRenderRecursiveInternal() +125
System.Web.UI.Control.PreRenderRecursiveInternal() +125
System.Web.UI.Page.ProcessRequestMain() +1489
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
############################################################
i have kept no passwords in my mssql server 2000 database
can anyone help me out with this problem
Hi,
How to ennumerate the Rights of an User for all the tables [Select/Insert/Update/Delete] in a database or how to ennumerate/list all the Table rights for a particular user in a database? By User, i mean the Login names [like bill, sam, sa] and not dbowner, public, etc. thanx in advance.
MySql has a statement like:
SHOW CREATE TABLE tablename;
that returns the precise CREATE TABLE statement for the specified tablename.
Sql Management Studio also allows scripting Create Statement for any object by right-clicking it.
But I want to do this programatically, and fetch CREATE statements for Tables, Procedures & Views.
How can I retrive CREATE statements for Database objects progrmatically in Sql Server???
I have a query that gets the tables, columns, indexes, index_columns for all tables in a data base.
But, I need to be able to select any data base on the server
and then drill down into the tables, columns, etc.
I looked at sys.databases but can't see how to relate that to the
sys.tables to extend my query.
Is there a way?
I've looked at the information_schema area and catalog views
but I don't see a solution yet.
Hi All,
Currently i am defining a simple relationship between
Customers->Orders->Order Details through the Database Diagrams feature in
the SQL 2K. Using the Server Explorer, i can see the Database Diagrams, but
when i try to "drop" the Database Diagrams into the page, it gives the error
message.
I would like to know the procedures to retrieve the database relationships
from Database Diagrams and manipulate them through ADO.NET
I prefer to "convert" already defined relationship using SQL Server Database
Diagrams into XSD file or probably there is another method to "read" those
relationship and manipulate them.
Thank you very much for all your help
I have a drop down menu for transmission. Inside the drop down menu, there are 1.Any 2.Auto 3.Manual options
Now I want to retrieve from my database, if the client select '1.Any' option. Meaning the output I want it to display all the products which have both auto and manual for transmission.
I have no problem retrieving all the products which either only have auto option or manual option.
I have some VB.NET code to retrieve data from an SQL Server database and display it. The code is as follows: -------------------------------------------------------------------------------------------------------
sw_calendar = calendarAdapter.GetEventByID(cid)
If sw_calendar.Rows.Count > 0 Then
lblStartDateText.Text = sw_calendar(0).eventStartDate
lblEndDateText.Text = sw_calendar(0).eventEndDate
lblTitleText.Text = sw_calendar(0).title
lblLocationText.Text = sw_calendar(0).location
lblDescriptionText.Text = sw_calendar(0).description
Else
lblStartDateText.Text = "*** Not Found ***"
lblEndDateText.Text = "*** Not Found ***"
lblTitleText.Text = "*** Not Found ***"
lblLocationText.Text = "*** Not Found ***"
lblDescriptionText.Text = "*** Not Found ***"
End If
-------------------------------------------------------------------------------------------------------
If all of the fields in the database has values, everything works ok. However, if the title, location or description fields have a null value, I receive the following error message:
Unable to cast object of type 'System.DBNull' to type 'System.String'.
I've tried a bunch of different things such as:
Adding ".ToString" to the database field,
Seeing if the value is null: If sw_calendar(0).description = system.DBnull.value...
...but either I get syntax errors in the code, or if the syntax is ok, I still get the above error message.
Can anyone help me with the code required to trap the null within the code example I've provided? I'm sure there are other, and better, ways to code this, but for now I'd really like to get it working as is, and then optimize the code once the application is working (...can you tell I have a tight deadline )
Thanks,
Brad
Hi there folks,
was just wondering if there was an easy way to include a files contents into a web page via a database field. A bit confusing i know.
Here goes:
I got a field called ContentPage stored in a database. (e.g Index.htm)
I want to retrieve this page and then include its contents in my middle div of the webpage like so: <!--#include file="<%=ContentPage%>"-->. Not allowing me to do this as you may have guessed. These pages will either be htm or aspx pages. This would make my life so much easier.
Is there any way of doing this or am i kidding myself.
Would appreciate any help.
Paul
Mean_A Std_Dev_A Mean_B Std_Dev_B Mean_C Std_Dev_C X_Co Y_Co Posn
71.7
9.36
73.23
3.62
70.87
4.06
12
14
1
72.69
8.02
79.39
2.66
73.39
5.16
13
15
2
74.37
10.27
77.33
4.10
79.33
3.44
14
16
3
The Above is my database, I need help in retrieving the X_Co and the Y_Co using values of rcv_A, rcv_B and rcv_C to compare with the Mean_A, Mean_B, Mean_C. The values of rcv_A, rcv_B and rcv_C are instances of values that are not exact of the mean columns , and we want is to compare it against our database and retrieve the row that is the closest to the rcv_A, rcv_B and rcv_C.
Here is an example of what i need. Let's say my rcv_A = 71, rcv_B = 73 and rcv_C = 70.8, so the row with mean value closest would be row 1, followed by row 2, then row 3.
So the result i hope to retrieve is in order of the closest value and i only need the X_Co and Y_Co.
This is what i want
X_Co Y_Co
---------------------------
12 14
13 15
14 16
So anyone please can help me in querying for the above results? Thanks
Hi All,
I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?
set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @cmd, no_output
SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @email, no_output
Thanks.
Hi All,
I have these two commands that I execute at the end of my stored procedure. I get an email every time I execute this stored procedure whether the select statement returns a value or not. But I only want to get an email if select statement returns an Error value. How can I accomplish this?
set @cmd = 'osql -S server -U user -P psswd -q "set nocount on; select distinct(rtrim(col1)) from ##table where datediff(dd,col2,getdate()) = 1 and (col1 like ''%Error: %'')" -h-1 -w 1025 -o J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @cmd, no_output
SET @email = 'mailsend -f someone@mymail.com -d -smtp -t someone@mymail.com -sub "Error Log Errors" -m J:MyFolderErrorLogMsg.txt'
EXEC master.dbo.xp_cmdshell @email, no_output
Thanks.
How can I get all SQL commands in SqlServer? How can I trace this commands?
Thansk
Hello,
I finally got access to Northwind/pubs.
I would like to know when and why do we use the following set commands. The SQL Server BOL does not say why and when to use these commands.
Thanks in advance!!!
sqlnovice123
Option Default Setting
Set nocount OFF
Set rowcount 0
Set ansi_nulls ON
Set quoted_identifier ON
Hi guys,I wanna ask bout the problem with my web application. I'm doing a select a statement from table 1 and and with the query results i got, i need it to store the result on table 2. How will i do this? I need your tips and suggestions.
View 1 Replies View Related