Retrieving Multiple Values Using Non-joined Files
Feb 25, 2008
Hi - I'm new to SSRS/SQL and have a situation I can't figure out. I've tried a number of things, but I'm not sure the best way to return a calculated column based on the structure of my tables.
I have a primary Detail table that tracks product testing results. The Detail records need to be calculated against a "Year" table that contains a set of values by year. This table contains a single record for each year. There isn't a direct key that joins these two tables.
The Detail table looks like:
Record ID: 9999
PO Number: 12345
Date: 12/1/2007
Test Result: 1.52
The Year table looks like:
Record ID: 1
Start Date: 10/6/2007
End Date: 6/14/2008
LowVal1: 1.0
HighVal1: 1.49
Incentive1: .05
LowVal2: 1.50
HighVal2: 1.59
Incentive2: .06
and so on...
The Detail records need to find the correct Year record based on the Detail date, find the correct value within the LowVal - HighVal range based on the Test Result value, and then multiply the Test Result by the correct Incentive value and return that value.
I was able to find the correct LowVal-HighVal range using an Expression in the report column. Now that I need multiple years, I can't figure out the best way to configure the query.
Any suggestions would be appreciated. Thanks in advance!
View 3 Replies
ADVERTISEMENT
Mar 30, 2007
I am trying to create a report using Reporting Services.
My problem right now is that the way the table is constructed, I am trying to pull 3 seperate values i.e. One is the number of Hours, One is the type of work, and the 3rd is the Grade, out of one column and place them in 3 seperate columns in the report.
I can currently get one value but how to get the information I need to be able to use in my reports.
So far what I've been working with SQL Reporting Services 2005 I love it and have made several reports, but this one has got me stumped.
Any help would be appreciated.
Thanks.
I might not have made my problem quite clear enough. My table has one column labeled value. The value in that table is linked through an ID field to another table where the ID's are broken down to one ID =Number of Hours, One ID = Grade and One ID= type of work.
What I'm trying to do is when using these ID's and seperate the value related to those ID's into 3 seperate columns in a query for using in Reporting Services to create the report
As you can see, I'm attempting to change the name of the same column 3 times to reflect the correct information and then link them all to the person, where one person might have several entries in the other fields.
As you can see I can change the names individually in queries and pull the information seperately, it's when roll them altogether is where I'm running into my problem
Thanks for the suggestions that were made, I apoligize for not making the problem clearer.
Here is a copy of what I'm attempting to accomplish. I didn't have it with me last night when posting.
--Pulls the Service Opportunity
SELECT cs.value AS "Service Opportunity"
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE ca.name = 'Service Opportunity'
--Pulls the Number of Hours
SELECT cs.value AS 'Number of Hours'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Num of Hours'
--Pulls the Person Grade Level
SELECT cs.value AS 'Grade'
FROM Cstudent cs
INNER JOIN cattribute ca ON ca.attributeid =cs.attributeid
WHERE ca.name ='Grade'
--Pulls the Person Number, First and Last Name and Grade Level
SELECT s.personnumber, s.lastname, s.firstname, cs.value as "Grade"
FROM student s
INNER JOIN cperson cs ON cs.personid = s.personid
INNER JOIN cattribute ca ON ca.attributeid = cs.attributeid
WHERE cs.value =(SELECT cs.value AS 'Grade'
WHERE ca.attributeid = cs.attributeid AND ca.name='Grade')
View 11 Replies
View Related
Jul 24, 2012
I'm looking to pull back some results but not include those that have a value in a column that matches a value in a temp table column.
The below code returns all the values rather than excluding those that are in the temp table.
Code:
------Folder Differences-----
--Create Temp Table--
CREATE TABLE #fdiff
(foldername VARCHAR(255))
SELECT
replace(
replace(foldername,'[Template] ','')
[Code] .....
View 2 Replies
View Related
Jan 11, 2014
I joined different tables and got a result like this:
result | process | goal | date |
------- ---------- ------ -----------
ok | process4 | 1 | 12.10.2013
bad | process1 | 2 | 13.10.2013
ok | process1 | 4 | 12.12.2013
good | process4 | 1 | 03.01.2014
ok | process1 | 3 | 10.04.2013
bad | process3 | 6 | 09.01.2014
bad | process4 | 3 | 30.12.2013
best |NULL| NULL
Now I want to count the results by counting the processes and group them by the result.
But it should be count the latest result per process only, e.g. for goal "1" just "good" at 03.01.2014. I solved that with a subquery (date=SELECT MAX(...)..).
But now the result "best" disappears, because that column has no date.
Secondly I want to count results for a specific process, e.g. for process4. Every goal has max. one process, with different dates. But one process could have more than one goal.
I want to have this result for process4:
count | result
------ -------
1 | good
1 | bad
0 | ok
0 | best
But I got only:
count | result
------ -------
1 | good
1 | bad
I have tried a lot, but nothing works.
The whole result (best, good, ok, bad) are stored in an other table and I joined it.
View 4 Replies
View Related
May 3, 2007
Hi
I'm trying to compare two varchars to check if they are the same, if they are the same then the color must turn red, if not then they must remain black
SELECT *
from members m, client c
where C.ClientID = m.ClientID
AND c.ClientID in (87,86)
AND m.email in ('dassd@fdskjh.com','asdfas@sdfd.net', etc...)
my results will give me two of the same email addresses but with different ClientID's, now when it
finds the same email it needs to make them both "RED"
Please help, any advice would be helpful
Kind Regards
Carel Greaves
View 1 Replies
View Related
Mar 11, 2008
I have two tables - products and productpropertyvalue
I need to select multiple fields from the productpropertyvalue as it corresponds to the product id. The script I am using is
select a.id, a.productname, a.siteprice,
b.propertyvalue
from product a, productpropertyvalue b
where a.id = b.productid and propertyid=590
This allows me to extract only 1 propertyid. I need to make it add 3 other columns for propertyid=589, 617, 615
Any help solving this problem would be appreciated - thanx!
Ron
View 14 Replies
View Related
Sep 28, 2007
We have an archive table which keeps each instance of a sales order that was archived under a "Verion No" field. Each time the sales order is archived it is entered into the archive tables (Sales Header Archive, Sales Line Archive). What I am trying to do is write a query to return all sales orders but only the most recent archived version.
For example this table layout is similar to what I am working with. Version No, Order No and Customer No. are the keys between the Header and Line tables, Customer Name column in the output is from only the Sales Header Archive table
SALES LINE ARCHIVE TABLE
Version No - Order No. - Customer No -----> (other columns)
1 s-5 1000
2 s-5 1000
1 s-6 2000
1 s-7 3000
2 s-7 3000
3 s-7 3000
1 s-8 4000
1 s-9 2000
2 s-9 2000
Here is what I need to output to show:
RESULTS OF JOINED TABLES
Version No - Order No - Customer No - Customer Name ---> (other columns)
2 s-5 1000 Something, Inc.
1 s-6 2000 Acme
3 s-7 3000 Company, LLC
1 s-8 4000 Blah & Associates
2 s-9 2000 Acme
It should return the last Version No of each Sales order.
Does that make sense? It is something probably easy... But, I've spent two days using multiples and multiples of different ways, that just aren't working: I'm about to dropkick my server cabinet...
View 4 Replies
View Related
Nov 7, 2006
I'm using SQL server 200
Table A has columns CompressedProduct, Tool, Operation
Table B in a differnt database has columns ID, Product, Tool Operation
I cannot edit table A. I can select records from A and insert into B. And I can select only the records that are in both tables.
But I want to be able to select any records that are in table A but not in Table B.
ie. I want to select records from A where the combination of Product, Tool and Operaton does not appear in Table B, even if all 3 on their own do appear.
This code return all the records from A. I need to filter out the records found in Table B.
---------------------------------------------------------------------------------------------------------------------------------
SELECT ID, CompressedProduct, oq.Tool, oq.Operation FROM OPENQUERY (Lisa_Link,
'SELECT DISTINCT CompressedProduct, Tool, Operation FROM tblToolStatus ts
JOIN tblProduct p ON ts.ProductID = p.ProductID
JOIN tblTool t ON ts.ToolID = t.ToolID
JOIN tblOperation o ON ts.OperationID = o.OperationID
WHERE ts.ToolID=66
') oq
LEFT JOIN Family f on oq.CompressedProduct = f.Product and oq.Tool = f.Tool and oq.Operation = f.Operation
View 1 Replies
View Related
Feb 18, 2003
Can you guys give me any specific classes I should read about to implement the above? Any specific methods?
Any webpage I should read?
Thanks for your direction/help!
View 22 Replies
View Related
Dec 3, 2007
As part of a web site I allow users to store documents in SQL Server 2000 using an Image column on a table. After the file is saved the user can open the document through the browser. This works great for most file extensions such as ".XLS" or ".DOC" but fails when attempting to open ".MSG" files (saved outlook messages). XLS documents will open in Excel and DOC documents open in Word, but MSG documents open in Notepad and display what appears to be binary data. I'm trying to figure out if this is a SQL Server issue or some sort of ASP/ASP.NET webserver issue.
If I attempt to open an MSG file stored directly on the web server, the file opens correctly using the "Microsoft Outlook View Control", but when attempting to open the same file saved in SQL Server, it attempts to open in notepad.
Any ideas?
View 2 Replies
View Related
Nov 1, 2004
Anyone know if it's possible to retrieve a parameterized value from dynamically executed SQL???
Code Example
Declare @table varchar(25)
Declare @somevalue varchar(3)
Set @table = 'sometable'
Set @somevalue = 'somevalue'
Declare @sqlBuild varchar(2000)
Set @sqlBuild = 'DECLARE @return varchar(3); ' +
' SELECT @return = COUNT(COLUMNAME) ' +
' FROM ' + @table +
' WHERE ' +
' value = ' + @somevalue
exec (@sqlBuild)
i want to be able to extract the value of @return for later use. this procdure works fine but I need to grab that value somehow.
Any suggestions?
View 3 Replies
View Related
Dec 17, 2007
Hi There,
Can I store flash files in the database. I have a table with one of the columns as varbinary datatype. Previously, I was saving images (as filebytes) into this column. But now I need to implement something to store the flash file. So, is it possible to store flash files in the database and retrieve them and display them in an asp.net page?
Thanks a lot for your suggestion!!
View 8 Replies
View Related
Oct 8, 2007
Hi,
I have a table with 3 colums and col1 and col2 are datetime columns as follows
ID Col1 Col2
----------------------------------------
1 D1 NULL
2 D2 D3
3 NULL D4
I want to retrive the ID along with the latest date from either of remaining columns.
Can any one let me know the query please??
~Mohan
View 6 Replies
View Related
Sep 17, 2007
Hello,
Please help me find solution to these questions?
1. How do I store audio and video files in sql server 2000.
2. Is it possible to store and retrieve audio and video files using t-sql
3. Which is the most efficient way to store and retrieve audio and video files in sql server
Your suggestions are most valued.
Thanks!
View 6 Replies
View Related
Sep 10, 2015
Question in review today is Creating a Report showing the FName, LName of all Employees not Specified in a region; I would assume "No Value to be Null" Correct?
Or is there another way for me to do this?
This is what I have so far...What am I missing that this is not showing me results?
Select Firstname, Lastname, Region
From Employees
WHERE Region LIKE 'null%';
View 3 Replies
View Related
May 1, 2006
I created one stored proc, then copied it to create another similar stored proc with just some filtering changes in the second. Now I want to obtain the results from both like this:
ProjFee ProjGross DailyRunRate Var1 InHouse1 InHouse2 GrossGoal Group Name PostedAmount
---------------------------------------------------------------------------------------------------------------------------
Row# 1 from current stored proc
Row # 2 from called stored proc
so something like this I should get in the end for example when both results are combined:
ProjFee ProjGross DailyRunRate Var1 InHouse1 InHouse2 GrossGoal Group Name PostedAmount
---------------------------------------------------------------------------------------------------------------------------
100000 33455 200 300 345555 4455555 5666666 Arizona 56000
103400 22455 900 700 777555 3333555 5444666 Illinois 660000
The first stored proc (CurrentMonthCollections_AZ) attempts to include the results of the second stored proc at the end (CurrentMonthCollections_IL) by calling it and inserting the fields into a temp table.
I was told by Angel to instead convert the second stored proc into a UDF...but having trouble with this.
What is the best approach to get the desired 2 rows back that I need in that fasion?
Here is the code for the 2 stored procs (very long so I will post as as links):
http://www.webfound.net/CurrentMonthCollections_AZ.txt
http://www.webfound.net/CurrentMonthCollections_IL.txt
Look at the end of CurrentMonthCollections_AZ.txt to see where I'm stuck in trying to select the results (ProjFee ProjGross DailyRunRate Var1 InHouse1 InHouse2 GrossGoal Var1 PostedAmount
) from both stored procs.
I don't think UNION is what I want because it will combine stuff...I just want 2 separated rows
View 7 Replies
View Related
Feb 4, 2007
I am trying to build an Sql page hit provider. I am having trouble getting a count back from the database. If I use ExecuteScalar it doesn't see any value in the returned R1C1. If I use ExecuteNonQuery with a @ReturnValue, the return value parameter value is always zero. Ideally I would like to use a dynamic stored proceudre if there are any suggestions for using them with C#. My table has rvPathName, userName and a date. I have the AddWebPageHit method working so I know data connection and sql support code in provider is working. I think the problem is either in how I am writing the stored procedures or how I am trying to retrieve the data in C#. Any help with this will be greatly appreciated.
View 5 Replies
View Related
Mar 3, 2008
Please excuse me if this question has been asked before; I couldn’t find it. Perhaps someone could point me to the solution.
A few years ago I wrote an order-entry application in classic ASP that I am now re-writing in ASP.NET 2.0. I am having very good success however I can’t figure out how to retrieve data from a stored procedure.
I am using the FormView & SqlDataSource controls with a stored procedure to insert items into an order. Every time an item is inserted into the order the stored procedure does all kinds of business logic to figure out if the order qualifies for pricing promotions, free shipping, etc. If something happens that the user needs to know about the stored procedure returns a message with this line (last line in the SP)
SELECT @MessageCode AS MessageCode, @MessageText AS MessageText
I need to retrieve both the @MessageCode and the @MessageText values in my application. In classic ASP I retrieved these values by executing the SP with a MyRecordset.Open() and accessing them as normal fields in the recordset.
In ASP.NET I have specified the SP as the InsertCommand for the SqlDataSource control. I have supplied all the parameters required by my SP and told the SqlDataSource that the insert command is a “StoredProcedure�. Everything actuly works just fine. The items are added to the order and the business logic in the SP works fine. I just have no way of telling the user that something important has happened.
Does anyone know how I can pickup these values so that I can show them to my users? Bassicly if @MessageCode <> 0 I want to show @MessageText on the screen.
View 10 Replies
View Related
Jul 23, 2005
I'm generating a list of parameters needed by stored procedures, and
I'd like to know which ones have default values assigned to them.
To retrieve the parameter information I use:
sp_sproc_columns @Procedure_Name='InsertUser''
However, the column that is supposed to give the default value,
'COLUMN_DEF' always returns as NULL, even when that column has a
default value assigned to it.
i.e.
CREATE PROCEDURE InsertUser@UserID INT = 10,.....
And then if I do a sp_sproc_columns @Procedure_Name='InsertUser'', the COLUMN_DEF value for the @UserID column is still NULL.
Does anyone know what I'm doing wrong and how I can retrieve the default value?
Thanks
View 1 Replies
View Related
Jul 16, 2015
I have a nested query that retrieves a min value. I would like to know how do i retrieve the corresponding time with that.
my data looks like this
valuevaluetime
1212/31/14 14:51
12.42/19/15 23:30
[highlight=#ffff11]10.92/21/15 6:40[/highlight]
13.21/25/15 20:47
My min value is 10.9 and i need the date 02/21/15
my nested query is as follows
( select min(cast(f.valuestr as float))
from bvfindings f
where f.ObjectName = 'Hematocrit'
and f.sessionid = s.sessionid
and f.ValueTime > s.open_time)
the above returns me the 10.9
i modified the query
select min(cast(f.valuestr as float)),
f.valuetime
from bvfindings f
where f.ObjectName = 'Hb'
but i get all values then.
View 6 Replies
View Related
Mar 7, 2007
Is it possible to retrieve the value of a subreport's field or control from the parent report? I'm doing some grouping in the subreport and need to retrieve the group by's data value from the subreport.
Also, is there a way to repeat the main page's body when subreport has a page break? ie you page break on some thing in the subreport and need the body and head of the parent report to repeat on subsequent pages.
Thanks,
Garick
View 3 Replies
View Related
Sep 3, 2007
Hi allI hv made a stored procedure which printsvarious messages using Print statement(shown in bold)------------------------------------------------------------------------------ .....if (@current_date<@ed) and (@current_date>@sd) begin print 'Date Lies Between Boundary Limits' select * from membership where uid=@uid end else begin if(@pipe=1) begin if(@plan_id=1) begin print 'Monthly Plan Activated' update membership set start_date=@opt_sd,end_date=DateAdd(M,1,@opt_sd),status=@opt,pipeline=0,user_option='',plan_id=null,download_limit=20 where uid=@uid select * from membership where uid=@uid end else begin print 'Weekly Plan Activated' update membership set start_date=@opt_sd,end_date=DateAdd(D,7,@opt_sd),status=@opt,pipeline=0,user_option='',plan_id=null,download_limit=10 where uid=@uid select * from membership where uid=@uid end end end --------------Now I want to retrieve the messages disp by these Print statements in my asp.net page where i m calling this stored proc.Pls suggest RegardsMunish
View 2 Replies
View Related
Jun 12, 2006
Not sure if this is the correct forum, but I 'm having problems retrieving a sqldatasource's asp:control parameter values from a selected row (during edit) in a gridview to update a record thru a stored procedure. The stored procedure is pretty intense, so I'd like to keep it in SQL if possible instead of creating the generic "update table set ..." that I see in most examples. It seems as if I can't get the propertyname right or something because it keeps giving me a "Procedure or function XX has too many arguments specified error". Maybe the DataKeyNames is not right?? I've tried just passing one parameter (ProductID-same as DataKeyNames) using "SelectedValue" as propertyname and still get the same. It's got to be something very simple, but I'm at a loss. All parameters are spelled the same in the sp (with an added "@" at start) as in the asp:controlparameters. Here's the gridview (asp.net 2.0 connecting to SQL Server 2005):
<asp:GridView ID="gvLoadEditProductPrices" runat="server" AutoGenerateColumns="False" AllowSorting="True" DataSourceID="SqlDataSource1" DataKeyNames="ProductID">
<Columns>
<asp:CommandField ShowEditButton="True" />
<asp:BoundField DataField="ProductID" HeaderText="ProductID" HeaderStyle-BackColor="white" InsertVisible="False"
ReadOnly="True" SortExpression="ProductID" />
<asp:BoundField DataField="Product" HeaderText="Product" SortExpression="Product" ReadOnly="True" />
<asp:BoundField DataField="ProductCat" HeaderText="ProductCat" SortExpression="ProductCat" ReadOnly="True" />
<asp:BoundField DataField="VarRate" HeaderText="VarRate" SortExpression="VarRate" />
<asp:BoundField DataField="loadid" HeaderText="loadid" InsertVisible="False" ReadOnly="True"
SortExpression="loadid" />
<asp:BoundField DataField="loadamount" HeaderText="loadamount" SortExpression="loadamount" ReadOnly="True" />
<asp:BoundField DataField="ProductCol" HeaderText="ProductCol" SortExpression="ProductCol" ReadOnly="True" />
<asp:BoundField DataField="PageID" HeaderText="PageID" SortExpression="PageID" ReadOnly="True" />
</Columns>
</asp:GridView>
and the sqldatasource's info:
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
ConnectionString="<%$ ConnectionStrings:MARSProductEditor %>" ProviderName="System.Data.SqlClient" SelectCommand="spGetLoadEditProductPrices" SelectCommandType="StoredProcedure" UpdateCommand="spUpdateProductPrices" UpdateCommandType="StoredProcedure" >
<UpdateParameters>
<asp:ControlParameter Name="ProductID" Type="Int32" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("ProductID")></asp:ControlParameter>
<asp:ControlParameter Name="LoadID" Type="Int32" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("LoadID")></asp:ControlParameter>
<asp:ControlParameter Name="PageID" Type="Int32" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("PageID")></asp:ControlParameter>
<asp:ControlParameter Name="ProductCol" Type="Int32" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("ProductCol")></asp:ControlParameter>
<asp:ControlParameter Name="NewRate" Type="Double" ControlID="gvLoadEditProductPrices" PropertyName=SelectedDataKey.Values("NewRate")></asp:ControlParameter>
</UpdateParameters>
<SelectParameters>
<asp:ControlParameter ControlID="ddlEstLoadsPerAcre" Name="LoadID" PropertyName="SelectedValue"
Type="Int32" />
<asp:ControlParameter ControlID="txtEditType" Name="PageName" PropertyName="Text"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
TIA,
John
View 1 Replies
View Related
Jan 11, 2008
Mean_A Std_Dev_A Mean_B Std_Dev_B Mean_C Std_Dev_C X_Co Y_Co Posn
71.7
9.36
73.23
3.62
70.87
4.06
12
14
1
72.69
8.02
79.39
2.66
73.39
5.16
13
15
2
74.37
10.27
77.33
4.10
79.33
3.44
14
16
3
The Above is my database, I need help in retrieving the X_Co and the Y_Co using values of rcv_A, rcv_B and rcv_C to compare with the Mean_A, Mean_B, Mean_C. The values of rcv_A, rcv_B and rcv_C are instances of values that are not exact of the mean columns , and we want is to compare it against our database and retrieve the row that is the closest to the rcv_A, rcv_B and rcv_C.
Here is an example of what i need. Let's say my rcv_A = 71, rcv_B = 73 and rcv_C = 70.8, so the row with mean value closest would be row 1, followed by row 2, then row 3.
So the result i hope to retrieve is in order of the closest value and i only need the X_Co and Y_Co.
This is what i want
X_Co Y_Co
---------------------------
12 14
13 15
14 16
So anyone please can help me in querying for the above results? Thanks
View 5 Replies
View Related
Aug 11, 2015
I am working on a model where I have a sales fact table. Each fact record has four different customer fields (ship- to, sold-to, payer, and bill-to customer). I have one customer dimension table that joins to the sales fact table four times (once for each of the customer fields above). When viewing the data in Excel, I would like to have four hierarchies (ship -to, sold-to, payer, and bill-to customer) within Customer.Â
Is there a way to build hierarchies within my Customer dimension based on the same Customer table? What I want is to view the data in Excel and see the Customer dimension. Within Customer, I want four hierarchies.Â
View 2 Replies
View Related
Jul 21, 2005
hy all..How can I achieve the above ?Moreover can I retrieve data from multiple databases which are lying on different DBMSs ( like retrieving from database A which is on SQL and from database B which is on Oracle ) ?Rgds.
View 2 Replies
View Related
Nov 9, 2001
I have multiple SQL 2000 servers that hold data which I retrieve using a single SQL stored procedure. Unfortunately, I don't know how to retrieve this data asychronously (in parallel).
For example, I retrieve data from two linked servers using the following:
select * into #temp from openquery(SomeLinkedServer,'exec BigQueryHere')
select * into #temp2 from openquery(OtherLinkedServer,'exec BigQueryThere')
.
.
lots of manipulation of the temporary tables to get what I want, etc.
.
.
The problem I have with this is that there is no reason why the first query should have to finish before the second query begins (serially) because these are on separate servers. Is there a way to execute these so that they run at the same time?
Bill
View 1 Replies
View Related
Sep 28, 2000
Hi, can someone plz give me an idea of how to proceed with this...
I've got a server side cursor that retrieves a list of customers from a sql server table which match a specific criteria (those who have had orders in the yr 2000)
For each customer, I need to retrieve a list of 5 top items purchased along with dollars spent on each item by that customer.
I've tried to do this in a loop that uses a counter but probably my syntax was off and I'm not sure that this is better than a correlated join? Can someone show me a temlate of the appropriate syntax to use for this operation
I appreciate suggestions, thanks again.
Irene
View 2 Replies
View Related
Sep 15, 2006
OK here's my question. I want to retrieve from my database employee table all those employees with the name eg. Smith and display them in a list. Can anyone give me any pointers please. I'm using VB 2005 Express Edition. So far this is what I have but it only seems to return 1 row when I know there are more than one entries with the name I am inputting
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim searchString As String
searchString = Me.SearchStringBox.Text
Try
Dim filter As String
filter = "LastName LIKE '" & searchString & "'"
Dim search() As System.Data.DataRow
search = myCDDataSEt.ClientData.Select(filter)
If search.Length > 0 Then
'no code as yet
Else
MessageBox.Show("The client " & searchString & "is not in the database")
End If
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
End Sub
View 2 Replies
View Related
Mar 11, 2015
I am using following queries in a stored procedure.This stored procedure is executed through a dot net application.
DECLARE @DEPTNBR BIGINT
SELECT @DEPTNBR = DEPTNBR
FROM DEPARTMENT_DETAILS WITH (UPDLOCK,READPAST)
WHERE STATUS= 1
UPDATE DEPARTMENT_DETAILS SET STATUS= 0 WHERE DEPTNBR = @DEPTNBR
SELECT DEPTNBR,DEPTNAME,DEPTLOC FROM DEPARTMENT_DETAILS WHERE DEPTNBR = @DEPTNBR ​
From my queries,I am providing a available department information.Each user needs to get unique available department information.But when more number of users using the application concurrently, multiple users getting same department information.How to solve my problem?I always wants to get unique department information even though multiple users using the application concurrently.
View 6 Replies
View Related
Jun 16, 2015
I have a requirement where in i have around 15 different flat files , filenames are fixed but folder path can be changed(i think i should use a variable for folder path). These 15 files data should go to their respective tables in the database.
Whether I need to create separate data flow task for each file or separate package? In addition to these, example : while importing product data into product table, if product ID already exists, we need to ignore it and upload only the new records.
View 4 Replies
View Related
Jun 27, 2006
I have a couple of hundred flat files to import into database tables using SSIS.
The files can be divided into groups by the format they use. I understand that I could import each group of files that have a common format at the same time using a Foreach Loop Container.
However, the example for the Foreach Loop Container has multiple files all being imported into the same database table. In my case, each file needs to be imported into a different database table.
Is it possible to import each set of files with the same format into different tables in a simple loop? I can't see a way to make a Data Flow Destination item accept its table name dynamically, which seems to prevent me doing this.
I suppose I could make a different Data Flow Destination item for each file, in the Data Flow. Would that be a reasonable solution, or is there a simpler solution, or should I just resign myself to making a separate Data Flow for every single file?
View 9 Replies
View Related
