I have read a lot in favor and recommendation of returning multiple resultsets.
But now I have to implement it with a scenario.
I have a Parent Table named "Books" and a Child one named "Volumes".
A book can have multiple volumes.
Now I want to display the list of Books with their Volumes pagewise.
How can I implement that procdure.
I have create stored procedure that returns 2 resultsets. When I configure OLE DB Source to use this procedure I can not add second output for he source. I get following error:
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Source [1]]: An output cannot be added to the outputs collection.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC020800F (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
How to add second output?
Hi there,
I'd need to generate multiple recordsets within a MS SQL stored procedure. The thing is these recordsets depend on each previous one (the first one obviously has parameters). How can I make this work? I can't create views with SPs. Thank you very, very much.
Martin
I have on stored procedure which returns mote than one resultset i want that to store in two different temp table how can achieve this in SQL server.
Following is the stored procedure and table that i need to create.
create procedure GetData as begin select * from Empselect * from Deptend
create table #tmp1 (Ddeptid int, deptname varchar(500),Location varchar(100))
Insert into #tmp1 (Ddeptid , deptname ,Location )
exec GetData
create table #tmp (empid int , ename varchar(500),DeptId int , salary int)
Insert into #tmp (empId,ename,deptId,salary)
exec GetData
I am looking out for sample stored procedures returning multiple records
Example: GetOrderDetailsByOrderId
The above stored procedure should take orderId as parameter and should return the the order details along mutiple line item details.
Using JDBC, is there a way to call a stored procedure with multiplereturn values? Thanks.
View 4 Replies View RelatedHi all,
I want to know how to handle multiple result sets return from Stored Procedure? I know one way is to insert the result sets into the table, but the limitation is the result sets must have the same data structure. If the result sets have different data structure, how can I handle it.
Thanks,
Hi,
How can i return multiple resultsets from SQLServer. For ex, if we pass EmpNo to my storedprocedure it should return his salary details(from Sal table) and Attendance details(attendance table).
Ramesh
Hi!I want to return a derived table along with 4 simple tables in a storedprocedure as follows:Input parameter: @FtNum (==Order Number, selects one Order and allassociated data)Table 1: OrdersTable 2: ItemsTable 3: InstancesTable 4: StockDetailsDerived Table: for each Item that requires stock items, 1st columnshould receive the ItemNo (from Items), subsequent columns should receive thedetails from StockDetails via the common key field 'StockCode'.I have so far used a 'Fetch' cursor to find all occurrences of a StockCodewithin the Items table, but have been unable to figure out how to first addthe ItemNo into the temporary table.Code is as follows:... build #tmp_StockDECLARE stock_cursor CURSOR FORSELECT StockCode, ItemNoFROM ItemsWHERE FtNum = @FtNumORDER BY ItemNoOPEN stock_cursorFETCH NEXT FROM stock_cursorINTO @StockCode, @ItemNoWHILE @@FETCH_STATUS = 0BEGININSERT INTO #tmp_Stock-- wish to insert ItemNo = @ItemNo here --SELECT *FROM ControlledStockWHERE StockCode = @StockCodeFETCH NEXT FROM stock_cursorINTO @Stockcode, @ItemNoENDOf course there may be a much simpler way to do this!Your help would be greatly appreciated either way.--Message posted via SQLMonster.comhttp://www.sqlmonster.com/Uwe/Forum...eneral/200510/1
View 2 Replies View Related
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
Hi!
I have a question about SQL Reporting Services. I have a stored procedure which returns multiple resultsets (multiple select). In my reporting services project I have a dataset that connects to this procedure. But, when I execute it in the Data tab, I only get the first resultset. So can't I have more resultsets?
I can't use more datasets (that have the selects in the procedure) because the procedure is complicated and has many calculation. I've managed to get all the selects in only one and the reporting services in working in this way. How about many resultsets in a dataset?
Thank you!
Irina Stanca
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedI have a table that contains 5 columns (VarChar); where column(0) is a unique ID. Using the unique ID I would like to get the other 4 columns return to me via a stored procedure. Is it possible to have a sproc that has one input var and 4 output?
View 4 Replies View RelatedHow to return multiple values from stored procedures to reports in sql server 2005
View 5 Replies View RelatedI have a stored procedure that selects the unique Name of an item from one table.
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
hi
i read that stored procedures can return multiple result sets?how is that?
thanks in advance.
Hi guys I know this is a really common question, and I have read loads of replies on it but everything I try does not work. I have written a small stored procedure in SQL server to upload images to a table and return the new ID using scope_identity. I have tested it and it works fine. here it is:******* @siteID numeric(18,0), @imgNum numeric(18,0), @title NVarchar(50), @MIMEtype nchar(10), @imageData varbinary(max)ASBEGINSET NOCOUNT ONdeclare @imageID intINSERT INTO [site_images] ([img_siteID], [img_num], [img_title], [img_MIME], [Img_Data]) VALUES (@siteID, @imgNum, @Title, @MIMEType, @ImageData) SET @imageID = SCOPE_IDENTITY()RETURN @imageIDSET NOCOUNT OFF************If I run this in management studio express it runs fine and returns the ID under 'return value'. The problem I have is trying to actually call that return value in VB. If I try using these lines:Dim returnParam As SqlParameterreturnParam = New SqlParameter("@imageID", SqlDbType.UniqueIdentifier)returnParam.Direction = ParameterDirection.OutputcmdTest.Parameters.Add(returnParam)withcnBKTest.Open()cmdTest.ExecuteNonQuery() imageIDparam = returnParam.value.toStringcnBKTest.Close() I get the error "procedure has too many arguments specified"And if I try to access the return value like this: imageIDparam = cmdTest.Parameters("@return_value").ValueI get the error "@return_value is not contained by this sqlparametercollection" What am I doing wrong? Any help would be greatly appreciated. Robsa
View 3 Replies View RelatedI have written this stored procedure but I get no return value (neither 0 nor 1). What I hope is when the transaction successful, return value 1. If fails, return value 0.1 set @TransactionOk = 0
2
3 BEGIN TRAN
4
5 UPDATE WhiteList_IMEI SET WhiteList_IMEI_Used = 1, Whitelist_IMEI_UsedDate = getdate()
6 WHERE WhiteList_IMEI_Code = @IMEICode_New
7
8 IF @@ERROR <> 0
9 BEGIN
10 ROLLBACK TRAN
11
12 PRINT ('Error. Contact Software Engineer.')
13 RETURN
14 END
15
16 COMMIT TRAN
17 set @TransactionOk = 1
Hi,
I have been trying to this this for quite a while with no joy can someone please tell me the error of my ways. I am trying to add a new record by stored procedure, this I can do, but my problem lies with the returnvalue part of the procedure. I cannot get it to work. When I debug it tells me that the "Specified cast is not valid" see C# code as i comment the line where it errors. I enclose a sample stored procedure and its c# code. Please can someone tell me where I am going wrong? as this is annoying me alot
SQL:create procedure SPUAddVehicleInsert
@VehicleDetailsRegistrationNumber varchar(50),
@VehicleDetailsMake varchar(50),
@VehicleDetailsModel varchar(50),
@NID bigint =null
as
insert into tblvehicledetails
(
VehicleDetailsRegistrationNumber,
VehicleDetailsMake,
VehicleDetailsModel,
)
values
(
@VehicleDetailsRegistrationNumber,
@VehicleDetailsMake,
@VehicleDetailsModel,
);
select @NID = scope_identity();c# code on sqldatasource: protected void dsAddVehicle_Inserted(object sender, SqlDataSourceStatusEventArgs e)
{
Int64 VID = (Int64)e.Command.Parameters["NID"].Value; //errors with specified cast is invalid
Response.Redirect("details.aspx?VID=" + VID.ToString());
}
protected void dsAddVehicle_Inserting(object sender, SqlDataSourceCommandEventArgs e)
{
SqlParameter p = new SqlParameter("NID", SqlDbType.BigInt);
p.Direction= ParameterDirection.ReturnValue;
e.Command.Parameters.Add(p);
}
sql datasource:<asp:SqlDataSource ID="dsAddVehicle" runat="server" ConnectionString="<%$ ConnectionStrings:National %>"
InsertCommand="SPUAddVehicleInsert" InsertCommandType="StoredProcedure" SelectCommand="SPUAddVehicleSelect"
SelectCommandType="StoredProcedure" OnInserted="dsAddVehicle_Inserted" OnInserting="dsAddVehicle_Inserting">
<InsertParameters>
<asp:Parameter Name="VehicleDetailsRegistrationNumber" Type="String" />
<asp:Parameter Name="VehicleDetailsMake" Type="String" />
<asp:Parameter Name="VehicleDetailsModel" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
I have a stored procedure that returns an integer value, declared as:Public Function MyProc(..) As Int32 . . Return <integer>End FunctionI return an integer value, and can do this and get the value returned from the method, as such:declare @rc intexec @rc = dbo.MyProc <params>select @rcThis returns the value; how do I return the value to code and get the value; I've been debugging and that is my problem, I can't get the value to return.Thanks a lot.
View 2 Replies View RelatedHello all of members, I have written a Stored Procedure.that creates a new account and then returns a value witch displays a result to me.if result is 1 "Username already exists" or 2 "E-Mail already exists".I did it with "Return" instruction.But, I don't know how can I get the returned value in ASP.NET(VB.NET)? Please help me. Thanks in advance
View 3 Replies View RelatedHi all,Is there anyway to get a returned value from a called Stored Procedure from within a piece of SQL? For example, I have the following code...DECLARE @testval AS INTSET @testval = EXEC u_checknew_dwi_limits '163'IF (@testval = 0)BEGIN PRINT '0 Returned'ENDELSEBEGIN PRINT '1 Returned'END...which
as you can see calls a SP called 'u_checknew_dwi_limits'. This SP
(u_checknew_dwi_limits) actually returns a value (1 or 0), so I want to
assign that value to the '@testval' variable (as you can see in my
code) - but Query Analyser is throwing an error at me. Is this the
correct way to do this?ThanksTryst
I have a Stored procedure (sql 2000), that inserts data into a table. Then, I add this, at the end: Return Scope_Identity()
I have the parameters for the sProc defined and added to the Command, but I'm having a really lousy time trying to figure out how to get the return value of the Stored PRocedure. BTW - I'm using OleDB instead of SQL due to using a UDL for the connection string.
I have intReturn defined as an integer
I've tried :Dim retValParam As OleDbParameter = cmd.Parameters.Add("@RETURN_VALUE", OleDbType.Integer)retValParam.Direction = ParameterDirection.ReturnValueintReturn=cmd.Parameters("@RETURN_VALUE").Value
whenever I add this section - I get an error that there are too many arguments for the sProc.
I've tried:intreturn=cmd.ExecuteNonquery - tried adding a DataReader - using ExecuteScalar - I've tried so many things and gotten so many errors - I've forgotten which formations go with which errors.
What is the best way to do this in the code part (VB.Net)?
Thanks ahead of time
I don't know whey this code does not return the values when I run it in sql server 2005 manager.set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[usp_usr_Add]
@FName nvarchar(30),
@LName nvarchar(30),
@UserName nvarchar(20),
@Password nvarchar(20),
@Email nvarchar(50),
@Country nvarchar(2),
@AIM nvarchar(10)
AS
SET NOCOUNT ON
BEGIN
DECLARE @usrID int
DECLARE @usrEmail int
SELECT @usrID = NULL
SELECT @usrEmail = NULL
SELECT @usrID = usrID FROM usr WHERE usrName = @UserName
IF (@usrID IS NOT NULL )
BEGIN
RETURN 1
END
SELECT @usrEmail = usrID FROM usr WHERE usrEmail = @Email
IF (@usrEmail IS NOT NULL)
BEGIN
RETURN 2
END
INSERT INTO usr (usrFName, usrLName, usrName, usrPassword, usrEmail, usrCountry, usrAIM, usrJoinDt)
VALUES (@FName, @LName, @UserName, @Password, @Email, @Country, @AIM, GetDate())
RETURN 0
END
When i run this code i executes fine except when the two conditions become true they do not return thier values, nor does it return 0 when it inserts a row.
Hi
I have the following stored procedure which when exectuted within the Query Analyzer adds a record and returns the @SeqRunNo value. However when I call
it in the from ado the record is added but the value is empty.
I enter the parameter as:
.Parameters.Append .CreateParameter("@SeqRunNo", adVarChar, adParamOutput, 4)
and try and access it as:
SeqRunNo = oCommand.Parameters("@SeqRunNo").Value
Any ideas?
Thanks.
john
CREATE PROCEDURE up_mix_Set_Seq_Run_No
@IID int,
@TrackingID int,
@ADP_Code varchar(6),
@ClientID varchar(20),
@SeqRunNo varchar(4) OUTPUT
AS
DECLARE @Max_Seq_No int,
@Seq_No varchar(4),
@LastUpdate datetime
SELECT @Seq_No = QTR_SEQ_RUN_NO FROM Transmission_Quarter
WHERE IID = @IID
AND Tracking_ID = @TrackingID
AND ADP_Code = @ADP_Code
IF ISNULL(@Seq_No,0) = 0
BEGIN
SET @LastUpdate = GETDATE()
SELECT @Max_Seq_No = CAST(MAX(QTR_SEQ_RUN_NO) AS int)
FROM Transmission_Quarter
WHERE IID = @IID
AND ADP_Code = @ADP_Code
IF ISNULL(@Max_Seq_No,0) = 0
BEGIN
SET @SeqRunNo = '0001'
END
ELSE
BEGIN
IF @Max_Seq_No = 9999
BEGIN
SELECT @SeqRunNo = '0001'
END
ELSE
BEGIN
SELECT @SeqRunNo = REPLICATE('0', 4 - DATALENGTH(CAST(@Max_Seq_No AS VARCHAR))) + CAST((@Max_Seq_No + 1) AS VARCHAR)
END
END
INSERT INTO Transmission_Quarter
(IID, Tracking_ID, QTR_SEQ_RUN_NO, ADP_Code, Last_Updated_By, Last_Updated_Date)
VALUES
(@IID, @TrackingID, @SeqRunNo, @ADP_Code, @ClientID, @LastUpdate)
END
ELSE
BEGIN
SELECT @SeqRunNo = @Seq_No
END
GO
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
How do I get then return value from an insert stored procedure?
for example:
CREATE PROCEDURE sp_ReceiptsInsertc
@Branch_ID int,
@Source varchar(1),
@BatchNo varchar(8),
@Amount money ,
@Iden int OUTPUT
AS
INSERT INTO Receipts(Branch_ID, Source, BatchNo, Amount)
VALUES (@Branch_ID, @Source, @BatchNo, @Amount)
SELECT @Iden=@@Identity
GO
Thanks
Hello Newsgroup !My Tools are:Windows 2000, VBA(Access 2000) and MS SQL Server 7.0I wrote in an *.adp project (Access 2000) a Stored Procedure "xyz"with parameters a,bIn my VBA Code i wrote:Dim par As New ADODB.ParameterCmd.CommandType = adCmdStoredProcCmd.CommandText = "[prcSucheUNRWIAEStichtag]"Set par = Cmd.CreateParameter("@a", adInteger)Cmd.Parameters.Append parSet par = Cmd.CreateParameter("@b", adVarChar, adParamInput, 5)Cmd.Parameters.Append par........Cmd.Parameters(0) = aCmd.Parameters(1) = bSet rsTemp = Cmd.ExecuteNow my Problem is the following:there is an error in the stored procedure and i want to use something likethis:if @idontknow = '000000000'Beginreturn(1) -- Something <>0endHow can i use this return value in my VBA code ? Maybe i should ask thisquestion in an other Newsgroup. Pleaselet me know in which oneGreetingsFrank
View 2 Replies View RelatedIn one of my SSIS jobs I have an 'Execute SQL Task' which is calling a stored procedure. This SP returns 0 or 1, if the SP returns 1 the package needs to stop executing. Is there a way to get the value that is returned from the SP and either continue or stop the job from continuing to run?
so if value is 0 it goes to the next step, if its 1 it stops running
Greetings All,
I am a newbie to SSIS and need some help. I need to get the return value from a stored procedure into a SSIS variable. I'm assuming I would use an OLE DB Command but I havn't a clue on how to capture the return value. Can someone get me started on how I can do this?
Note, the return value is actually an identity of the inserted value. I need this value in my data flow for further processing.
Thanks is advance!
I am have stored procedure that accepts one parameter and returns a single value
The sp works fine.
My question is how do I set the c# webpage to return the single value.
I need a specific example of how to code.
this is how the code should work.
A blank form is loaded, when the user clicks submit I need the code to pull the Login name from the text box and check to see if it exist. I have the sp working the way I need it to. But I can figure how to pull the single value into a variable in the code behind.
I am using dataset elsewhere on the site, so I created a ds the calls the sp. Can it work this way?
thanks,
Hi AllHere is my SPALTER PROCEDURE dbo.InsertPagerDays @ReportEndDate datetime, @PagerDays int,@UserID varchar(25)ASIF EXISTS(-- you cannot add a pager days more than once per report dateSELECT ReportEndDate, UserId from ReportPagerDays where ReportEndDate = @ReportEndDate and UserId = @UserID)Return 1 elseSET NOCOUNT OFF;INSERT INTO [ReportPagerDays] ([ReportEndDate], [PagerDays], [UserID]) VALUES (@ReportEndDate, @PagerDays, @UserID)RETURNMy Question is, this SP will not let you enter in a value more than once (which is what i want) but how do I write my code to inform the user? Here is my VB code becuase the SP does not error out (becuase it works it acts as if the record updates)How can I catch the Return 1'set parameters for SPDim cmdcommand = New SqlCommand("InsertPagerDays", conn)cmdcommand.commandtype = CommandType.StoredProcedurecmdcommand.parameters.add("@ReportEndDate", rpEndDate)cmdcommand.parameters.add("@PagerDays", PagerDays)cmdcommand.parameters.add("@UserId", strUserName)Try'open connection hereconn.Open()'Execute stored proccmdcommand.ExecuteNonQuery()Catch ex As Exceptionerrstr = ""'An exception occured during processing.'Print message to log file.errstr = "Exception: " & ex.Messagelblstatus.ForeColor = Drawing.Color.Redlblstatus.Text = "Exception: " & ex.Message'MsgBox(errstr, MsgBoxStyle.Information, "Set User Report Dates")FinallyIf errstr = "" Thenlblstatus.ForeColor = Drawing.Color.Whitelblstatus.Text = "Pager Days Successfully Added!"End If'close the connection immediatelyconn.Close()End Try
View 1 Replies View Related