Return Stored Procudure Values
Nov 5, 2005
I have a quick question for you about SQL stored procedures. If I'm
in a stored procedure and want to call another stored procedure and
return values from the second stored procedure what is the procedure?
I know you do the following to run the second stored procedure and pass
in any parameters:
EXEC GetAuthorBooks @AuthorID
So if I wanted the GetAuthorBooks to return all the books for an author
and then populate a temp table in the original stored procedure, how do
I return those records, and populate the temp table?
What do I have to add to this line: EXEC GetAuthorBooks @AuthorID?
View 4 Replies
ADVERTISEMENT
Aug 19, 2015
I have a stored procedure that selects the unique Name of an item from one table.
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
View 17 Replies
View Related
Jan 11, 2000
I have a stored procedure (see below), in which I would like to check if the create an identity column and make it a primary key succeeded. I check @@error after the exec statement. This used to pick up an error if the table already had an identity column. It has stopped doing that. Why? And, if this is not the way to capture the error after the exec statement, how do I do it?
CREATE PROCEDURE rasp_test3
/*
Written by Judith Farber Abraham
this procedure loops thru sysobjects looking for user tables.
If a user table, does it have a primary key?
If not, add an identity column to table and make it a primary key
*/
--would like to have sp in main db but use from all three
@fixDB nvarchar(50)--the db to which to add PKs
AS
Declare @TableName varchar(50)
Declare @TableID int
Declare @Msg varchar (50)
Declare @ColumnName varchar(50)
Declare @IndexName varchar(50)
Declare @MyCursor nvarchar(500)
declare @MyCursorC nvarchar(500)
declare @CName sysname
--Set @Msg = "********* Finished adding Ident fields *************"
/* */
/*
do for all user tables ( xtype = u )
*/
set @Mycursor = N'Declare SysCursor cursor for select Name, ID from ' + @fixdb +'.dbo.sysobjects where xtype = "u"'
execute sp_executesql @mycursor
open syscursor
Fetch next from SysCursor into @TableName, @TableID
/* -1 = no record; -2 = row deleted; 0 = got a row */
While (@@Fetch_status <> -1)
Begin
If (@@Fetch_status <> -2)
Begin /* have a user row (table) */
/* */
set @ColumnName = @TableName + 'ID'
set @IndexName = 'PK_' + @columnName
--only add ident and PK if no primary key in table
If not exists (Select * from Sysobjects where Parent_obj = @TableID and xtype = 'PK')
--add an identity column to user table and make it a Primary key
EXEC ('ALTER TABLE ' + @tablename + ' ADD ' + @columnName + ' INT IDENTITY CONSTRAINT ' + @IndexName + ' PRIMARY KEY ' )
--
Begin
--if error, assume already ident column, so find column name & make PK
print @@error
if @@error <> 0 print "jerror occured"
--set @MycursorC = N'Declare SysCursorC cursor for SELECT c.name
--FROM syscolumns c, sysobjects o
--WHERE ((c.id = o.id) AND (c.status = 128)) AND (o.name = ' + @tablename + ')'
--execute sp_executesql @mycursorC
--Open SyscursorC
--Fetch next from SysCursorC into @CName
--print @cname
--close syscursorc
--deallocate syscursorc
--Exec ('ALTER TABLE ' + @tablename + ' ADD ' + @columnName + ' INT IDENTITY CONSTRAINT ' + @IndexName + ' PRIMARY KEY ' )
--select @cname=c.name
--print c.name
End
End
Fetch next from SysCursor into @TableName, @TableID
End
--Print @Msg
Close SysCursor
Deallocate SysCursor
Return
Thanks for any help,
Judith
View 3 Replies
View Related
Jul 23, 2005
Hello all,I have a stored procedure that prompts the user for beginning date andending date to run a monthly report. The prompt saysEnter_Beginning_Date and Enter_Ending_Date. I want the prompt to sayEnter Beginning Date (Example:1-1-2003) or something like that. Isthere a way to do this?CREATE PROCEDURE dbo.MonthlyReport(@Enter_Beginning_Date datetime,@Enter_Ending_Date datetime)AS SELECT incident, @Enter_Beginning_Date AS BeginningDate,@Enter_Ending_Date AS EndingDate, COUNT(*) AS OccurancesFROM dbo.IncidentWHERE (DateOccured BETWEEN @Enter_Beginning_Date AND@Enter_Ending_Date)GROUP BY incidentGO
View 6 Replies
View Related
Mar 8, 2004
Hi,
Im fairly new to writing stored procudures so I thought you lot might be able to help with this problem.
I have a stored procudure which looks like this:
CREATE PROCEDURE usrCienet.spAdminAgencyActivate_Select
(
@strAgencyId CHAR(6)
)
AS
DECLARE @idAgency INT
SELECT @idAgency = idAgency FROM tblAgencies WHERE strAgencyId = @strAgencyId;
SELECT strName, strAddress1, strAddress2, strCounty, strCountry, strPostcode, strTelephone, strFax, bitActive, bitHeadOffice, bitFinanceBranch
FROM tblBranches
WHERE fk_idAgency = @idAgency
SELECT strFirstName, strSurname, strUsername, bitActive
FROM tblUsers
WHERE fk_idAgency = @idAgency
GO
It basically first declare's and sets @idAgency using the first small select statment, then uses that parameter to run two more selects queries which I want sending to a dataset. Now within the Query Analyzer this works fine. But in my asp.net page it trows up this error:
Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'spAdminAgencyActivate_Select'
Now the code im using in the asp.net page is as follows:
Dim objSqlConnection as New SqlConnection(ConfigurationSettings.AppSettings("strCon"))
Dim objSqlCommand_Select as New SqlCommand("spAdminAgencyActivate_Select", objSqlConnection)
objSqlCommand_Select.Parameters.Add(New SqlParameter("@strAgencyId", SqlDbType.Char, 6))
objSqlCommand_Select.Parameters("@strAgencyId").Value = "tes001"
Dim objSqlDataAdapter as New SqlDataAdapter(objSqlCommand_Select)
Dim dsActivateAgency as New DataSet()
objSqlConnection.Open()
objSqlDataAdapter.TableMappings.Add("Table", "tblBranches")
objSqlDataAdapter.TableMappings.Add("Table1", "tblUsers")
objSqlDataAdapter.Fill(dsActivateAgency)
objSqlConnection.Close()
Can anyone help? I believe the error is in the stored procedure somewhere, because if I change the stored procedure so no parameters are being passed to it then it starts working. This is what I comment out and change for it to to get it working, but obviously this is not satisfactory as a final result because the parameter is hard coded in the stored procedure. Im just showing this to see if it gives anyone a clue!!
CREATE PROCEDURE usrCienet.spAdminAgencyActivate_Select
--(
--@strAgencyId CHAR(6)
--)
AS
--DECLARE @idAgency INT
--SELECT @idAgency = idAgency FROM tblAgencies WHERE strAgencyId = @strAgencyId;
SELECT strName, strAddress1, strAddress2, strCounty, strCountry, strPostcode, strTelephone, strFax, bitActive, bitHeadOffice, bitFinanceBranch
FROM tblBranches
WHERE fk_idAgency = 1
SELECT strFirstName, strSurname, strUsername, bitActive
FROM tblUsers
WHERE fk_idAgency = 1
GO
Thanks in advance for any help!!
- Carl S
View 1 Replies
View Related
Aug 1, 2007
Hi..
I m working on MS SQL Server 2000.
I am trying to pass a list of numbers to a stored procedure to be used with 'IN()' statement.
I was doing something like..
Create Procedure proc
(
@Items varchar(100) --- List of numbers
)
AS Begin
Declare @SQL varchar(8000)
Set @SQL =
'
Select Query......
Where products IN (' + @items + ') '
'
Exec (@SQL)
This stored procedure is working fine, but when i m adding more required stuff to that, the size exceeds 8000, & it gives the error "Invalid operator for data type. Operator equals add, type equals text."
Can any1 please help me out with this ASAP??
View 4 Replies
View Related
Jun 4, 2004
Hello Group
I am new to stored procedure and I need some assistants. I am using the following stored procedure and I would like the return the fldPassword and fldFullName values. Both fields are in the same table. What I am trying to do is display the uses full name (i.e. Welcome <full Name>) and with the password I want to check that the password is not the default password if it is then do a redirect to the change password page.
Thank you
Michael
CREATE PROCEDURE stpMyAuthentication
(
@fldUsername varchar( 50 ),
@fldPassword Char( 25 ),
@fldFullName varchar( 75 ) OUTPUT
)
As
DECLARE @actualPassword Char( 25 )
SELECT
@actualPassword = fldPassword
FROM [tbUsers]
Where fldUsername = @fldUsername
IF @actualPassword IS NOT NULL
IF @fldPassword = @actualPassword
RETURN 1
ELSE
RETURN -2
ELSE
RETURN -1
GO
code
Sub Login_Click(ByVal s As Object, ByVal e As EventArgs)
If IsValid Then
If MyAuthentication(Trim(txtuserID.Text), Trim(txtpaswrd.Text)) > 0 Then
FormsAuthentication.RedirectFromLoginPage(Trim(txtuserID.Text), False)
End If
End If
End Sub
Function MyAuthentication(ByVal strUsername As String, ByVal strPassword As String) As Integer
Dim strFullName As String
' Variable Declaration
Dim myConn As SqlConnection
Dim myCmd As SqlCommand
Dim myReturn As SqlParameter
Dim intResult As Integer
Dim sqlConn As String
' Set conn equal to the conn. string we setup in the web.config
sqlConn = ConfigurationSettings.AppSettings("sqlDbConn")
myConn = New SqlConnection(sqlConn)
' We are going to use the stored procedure setup earlier
myCmd = New SqlCommand("stpMyAuthentication", myConn)
myCmd.CommandType = CommandType.StoredProcedure
' Set the default return parameter
myReturn = myCmd.Parameters.Add("RETURN_VALUE", SqlDbType.Int)
myReturn.Direction = ParameterDirection.ReturnValue
' Add SQL Parameters
myCmd.Parameters.Add("@fldUsername", strUsername)
myCmd.Parameters.Add("@fldPassword", strPassword)
myCmd.Parameters.Add("@fldFullName", strFullName)
' Open SQL and Execute the query
' Then set intResult equal to the default return parameter
' Close the SQL connection
myConn.Open()
myCmd.ExecuteNonQuery()
intResult = myCmd.Parameters("RETURN_VALUE").Value
Session("strFullName") = strFullName
myConn.Close()
Response.Write(strFullName)
' If..then..else to check the userid.
' If the intResult is less than 0 then there is an error
If intResult < 0 Then
If intResult = -1 Then
lblMessage.Text = "Username Not Registered!<br><br>"
Else
lblMessage.Text = "Invalid Password!<br><br>"
End If
End If
' Return the userid
Return intResult
End Function
View 1 Replies
View Related
May 9, 2008
Hi,
I am trying to get the combination of results in my stored procedure, I am not getting what I need. Following are the things which I need to return from my stored proc.
1. I need to select distinct categories and their record count
2. I also need to select the records from the table.
3. Need to send both category, record counts and records.
First is it possible in stored procedure?
Following is helpful information.
Data in tables looks like this.
prod id, prod_name, prod_category
1, T shirts, Mens Apparel
2 , Shirts, Mens Apparel
3 , Pants , Mens Apparel
4, Tops , Women Wear
5, Bangles, Women Wear
And in User Interface I need to show like this.
Mens Apparel (3)
1 T Shirts
2 Shirts
3 Pants
Women Wear (2)
4 Tops
5 Bangles
Please help me if there is any way to return the complete data structure using stored procedure. If I do something in java code, I can get this, but I am trying to get directly from stored procedure only.
Thanks in advance...
Chandrasekhar
View 1 Replies
View Related
Aug 13, 2007
Hi,
I have a requirement to get two count values from a stored procedure and use those values in other stored procedure.
How can I do that. I'm able to get only 1 value if i use the return key word.
Eg:
create proc test1 as
Begin
Declare scount int
Declare scount2 int
-- statements in stored procedure
return scount
return scount2
End
create proc test2
Declare variables...
Exec Test1
// here i want the values (scount and scount2 ), processed in stored procedure Test1 .
How can i get this.. please let me know..
Thanks,
srikanth
View 7 Replies
View Related
Aug 17, 2006
I need to somehow filter the results of my stored procedure to return the distinct "OrderNum" values. I'm using SQL database and I'm look for a way to alter the results from the stored procedure. My stored procedure rptOpenOrderLines currently returns all invoices (items under a OrderNum). I want to somehow filter those results to return one and only one of those "OrderNum" variables from the invoices. The tricky part is that I need to somehow find a way to do this without going into my database and directly altering the SQL stored procedure. I would be happy for any recommendations/ideas. Thanks!
View 3 Replies
View Related
Feb 1, 2007
I have a table that contains 5 columns (VarChar); where column(0) is a unique ID. Using the unique ID I would like to get the other 4 columns return to me via a stored procedure. Is it possible to have a sproc that has one input var and 4 output?
View 4 Replies
View Related
Jul 20, 2005
I came across an article in SQL Mag about Crosstab Queries. It worksgreat in Query Analyzer, but I'm stuck on how to use it in an AccessADP. I need to use it as a Recordsource in a form and report. Cansomeone tell me how to use it, and please try to be as descriptive aspossible. I'm new to Stored Procedures.Thanks*****************************************CREATE PROC sp_CrossTab@table AS sysname, -- Table to crosstab@onrows AS nvarchar(128), -- Grouping key values (on rows)@onrowsalias AS sysname = NULL, -- Alias for grouping column@oncols AS nvarchar(128), -- Destination columns (on columns)@sumcol AS sysname = NULL -- Data cellsASDECLARE@sql AS varchar(8000),@NEWLINE AS char(1)SET @NEWLINE = CHAR(10)-- step 1: beginning of SQL stringSET @sql ='SELECT' + @NEWLINE +' ' + @onrows +CASEWHEN @onrowsalias IS NOT NULL THEN ' AS ' + @onrowsaliasELSE ''ENDCREATE TABLE #keys(keyvalue nvarchar(100) NOT NULL PRIMARY KEY)DECLARE @keyssql AS varchar(1000)SET @keyssql ='INSERT INTO #keys ' +'SELECT DISTINCT CAST(' + @oncols + ' AS nvarchar(100)) ' +'FROM ' + @tableEXEC (@keyssql)DECLARE @key AS nvarchar(100)SELECT @key = MIN(keyvalue) FROM #keysWHILE @key IS NOT NULLBEGINSET @sql = @sql + ',' + @NEWLINE +' SUM(CASE CAST(' + @oncols +' AS nvarchar(100))' + @NEWLINE +' WHEN N''' + @key +''' THEN ' + CASEWHEN @sumcol IS NULL THEN '1'ELSE @sumcolEND + @NEWLINE +' ELSE 0' + @NEWLINE +' END) AS c' + @keySELECT @key = MIN(keyvalue) FROM #keysWHERE keyvalue > @keyENDSET @sql = @sql + @NEWLINE +'FROM ' + @table + @NEWLINE +'GROUP BY ' + @onrows + @NEWLINE +'ORDER BY ' + @onrows-- PRINT @sql + @NEWLINE -- For debugEXEC (@sql)GO
View 6 Replies
View Related
Sep 23, 2015
If I create a stored procedure and do not specify a return value or type, why does SSMS show that the stored procedure returns an int in the object explorer? Is that simply the success flag?
View 5 Replies
View Related
Jun 22, 2007
How to return multiple values from stored procedures to reports in sql server 2005
View 5 Replies
View Related
Sep 24, 2007
Can anyone let me know the prefered method for handling stored procedure errors. I usually trap the error in the stored proc and then return a value using an output parameter
e.g stored proc
if @@error <> 0 beginset @returnValue = -1returnend
c#com.Parameters.Add("@returnValue", SqlDbType.Int).Direction = ParameterDirection.Output;con.Open();com.ExecuteNonQuery();
int result = (int)com.Parameters[0].Value;
if (result == -1){//throw exception}else{//do whatever}
View 2 Replies
View Related
Sep 5, 2004
I need to check whether procedure found any matches or not. If not it has to return the column name where matching value was not found. For example, if there was no record found in the table "Addresses" column "customer" with the value @username, it should return "street". If id with value @prod_id was not found in the table "Products", the "productname" must be returned as well.
CREATE PROC sp_test
@id INT,
@username VARCHAR(50),
@prod_id INT
AS
SELECT name FROM Customers WHERE id=@id
SELECT street FROM Addresses WHERE customer=@username
SELECT productname FROM Products WHERE id=@prod_id
It is kind of check, which has to find out if users have inserted all the necessary values or not.
Thanks for any advice.
View 4 Replies
View Related
Jul 23, 2005
Using JDBC, is there a way to call a stored procedure with multiplereturn values? Thanks.
View 4 Replies
View Related
Feb 12, 2008
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT)
The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO.
returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
CREATE procedure [dbo].[Marketing_extract_history_load_TEST]
@table_name varchar(200),
@i int output
as
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
View 2 Replies
View Related
Apr 25, 2007
I want to insert 3 values to sql database through store procudure
--- a store procudure is like this--
ALTER PROCEDURE dbo.FreeExperience
@identity ,
@name nvarchar(20),@gender int,
AS begin Insert into list(cid,name,gender) values (@identity,@name,@gender)
end RETURN
-----------------------------------------------------------
the cid is a identity value . it will +1 automatically when user insert a new data..
if i ingore this column in store procudure it will cause error (becuase this column is not allow null)
please help. thanks
View 11 Replies
View Related
Feb 14, 2001
How do you get the return value(in ASP) of @@identity in a stored procedure while inserting a row?
View 2 Replies
View Related
Jul 27, 2004
Using ado, the _CommandPtr::Execute method returns a recordset. When calling a storedproc with this method, does the 'return' statement return the value in a recordset ?
EG:
//c++ ADO
_CommandPtr pCmd(__uuidof(Command));
............
_RecordsetPtr pRs = pCmd->Execute(NULL, NULL, adCmdStoredProc);
// Stored proc
CREATE PROCEDURE usp_my_proc
AS
SELECT .... FROM tbMyTable WHERE x = something
IF(@@ERROR <> 0)
return -1
.....
What in the case of an error would be returned to pRs recordset?
Any thoughts?
Mike B
View 2 Replies
View Related
Jan 25, 2006
hello,
is it possible to return a return value as a numeric datatype
I can successfully return as an integer, but when i change it to numeric i get this error
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E21)
[Microsoft][ODBC SQL Server Driver]Invalid scale value
/output.asp, line 15
my output value in my asp code is thus
Command1.Parameters.Append Command1.CreateParameter("@RETURN_VALUE", 131, 4)
thanks
Afrika
View 1 Replies
View Related
Jan 25, 2006
hello,
is it possible to return a return value as a numeric datatype
I can successfully return as an integer, but when i change it to numeric i get this error
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E21)
[Microsoft][ODBC SQL Server Driver]Invalid scale value
/output.asp, line 15
my output value in my asp code is thus
Command1.Parameters.Append Command1.CreateParameter("@RETURN_VALUE", 131, 4)
thanks
Afrika
View 1 Replies
View Related
Feb 4, 2004
I have calling a stored procedure that returns two values, and I want to catch these values and to store them into a variable.
Here is a piece of my SP inside SQL Server that shows the returned values:
…
SELECT @Id = SCOPE_IDENTITY()
SELECT @Id AS user_id
SELECT 1 AS Value
END
GO
In my aspx page I am trying to call the first value like this:
Dim nID
CmdInsert.Parameters.Add(New SqlParameter("@RETURN_VALUE", SqlDbType.bigint, 8, "user_id"))
CmdInsert.Parameters("@RETURN_VALUE").Direction = ParameterDirection.ReturnValue
CmdInsert.Parameters("@RETURN_VALUE").Value = nID
And to check if the right value is returned I use:
strConnection.open()
cmdInsert.ExecuteNonQuery
'Set the value of a textbox
ident.text = nID
strConnection.close()
But now no value appears in the textbox, How can I achieve it? What is wrong?
View 6 Replies
View Related
Jun 2, 2004
I have a situation where I need two values (both are integers) returned from a stored procedure. (SQL 2000)
Right now, I use the statement "return @@Identity" for a single value, but there is another variable assigned in the procedure, @NewCounselingRecordID that I need to pass back to the calling class method.
I was thinking of concatenating the two values as a string and parsing them out after they are passed back to the calling method. It would look something like "21:17", with the colon character acting as a delimiter.
However, I feel this solution is kludgy. Is there a more correct way to accomplish this?
Thanks in advance for your comments.
View 2 Replies
View Related
Apr 29, 2004
First question :
How can I set the return value of READTEXT to a variable of type nvarchar.
Second question :
I have a table t1 with a ntext column n1.
The ntext column has has words separated by empty space.
Each word can be assumed to be of size <= 255 characters.
How can I extract all the keywords in the ntext column to a table t2 with a column word nvarchar(255).
Assume that the text in column n1 is big enough so that it cannot be cast into a nvarchar or any other simpler type.
Any help on this is greatly appreciated.
Please do provide a sample code.
Alok.
View 1 Replies
View Related
Jan 9, 2014
I need to Return values with hierachy sum.
I have provided the tables with data and result expected below
============
CREATE TABLE
============
CREATE TABLE [dbo].[Travel_Master](
[Load_Id] [int] NULL,
[Mode_Id] [nchar](2) NULL,
[Mode_Info] [nchar](10) NULL,
[Has_Nodes] [nchar](3) NULL
) ON [PRIMARY]
[Code] ....
The parent data will have either QA or QC
Child will have data in QY.
========================
EXPECTED RESULT
========================
Mode_Info |Mode_Detail| QA| QC|QY
Air||4 | |
Sea|||5|
SEA|SHIP|||15
SEA|BOAT|||25
ROAD|||2 |
ROAD|BUS|||20
ROAD|BIKE|||30
ROAD|CYCLE|||4
ROAD|TRAM|||10
ROAD|CAR|3||
ROAD|BMW|||36
ROAD|AUDI|||84
View 3 Replies
View Related
Apr 19, 2014
I am trying to return all the names of employees and their managers
this query returns all the employees except for 1
SELECT E.FNAME,E.LNAME,M.FNAME,M.LNAME
FROM EMPLOYEE E,EMPLOYEE M
WHERE E.SUPERSSN=M.SSN
the one that isn't returned has a null SUPERSSN, but when I add in:
OR E.SUPERSSN IS NULL
it returns a row with the name of the employee whose SUPERSSN is null 8 times (where each time the M.FNAME,M.LNAME are other employee names)
How do I ammend the first query to return each employee and their respective manager once, the employee without a manager having null values for the manager name columns?
View 1 Replies
View Related
Sep 15, 2006
I am new to SQL and I am trouble-shooting a problem with a home-grown app someone else wrote using PERL. It has a web interface with names of boards. I found the program where i need to add the board names into and did that. The new board names show up in the drop-down list in the Web page for the app. Alerts are sent to the new board names and show up on the new boards. Users are granted access to the new boards and they can clear items off the new boards. Yet when i try to use a report function for the new boards i added, nothing is returned. I even ran a simple SQl select statement specifying the new board names and nothing is returned. The older board names, some of which i added myself, return values. I don't know what is going on. Any help is appreciated.
View 3 Replies
View Related
Aug 22, 2007
Hi,
How do I ensure that DISTINCT values of r.GPositionID are returned from the below??
Code Snippet
SELECT CommentImage AS ViewComment,r.GPositionID,GCustodian,GCustodianAccount,GAssetType
FROM @GResults r
LEFT OUTER JOIN
ReconComments cm
ON cm.GPositionID = r.GPositionID
WHERE r.GPositionID NOT IN (SELECT g.GPositionID FROM ReconGCrossReference g)
ORDER BY GCustodian, GCustodianAccount, GAssetType;
Thanks.
View 11 Replies
View Related
Sep 27, 2004
Hi,
I have two tables. Both tables have a FirstName and a LastName field. I can return the results where (LastName = LastName) and (FirstName = FirstName). However in one table some of the FirstName values are shortened ie Pat is P etc.
Is there some way (its prob using LIKE but i can't get it right) I can write the below query so that it returns values where the first letter of FirstName in one table equals the first letter of FirstName in the second table.
SELECT tbl2.FirstName, tbl2.LastName, SALARY.[Employee No]
FROM SALARY INNER JOIN tbl1 ON (SALARY.LastName = tbl2.LastName) AND (SALARY.FirstName = tbl2.FirstName)
Cheers for all help.
View 2 Replies
View Related
May 23, 2007
I want the following query to return a row even when table 'X' is empty. How would I do this?
SELECT TOP 1 @Var1, @Var2, @Var3 from X
The parameters @Var1, @Var2 and @Var3 are passed to the stored procedure in which the above query is included.
When table is empty, it reurn nothing. It only return a row when table is not empty.
View 16 Replies
View Related
Dec 30, 2003
This is a portion of my stored procedure in T-SQL
CREATE PROCEDURE GetPoll
(
@PollID INT,
@PollQuestion VARCHAR(1000) Output,
@PollOptions VARCHAR(1000) Output,
@PollPercentages DECIMAL Output
)
AS
SELECT @PollQuestion = (SELECT PollQuestion FROM Polls WHERE PollID = @PollID)
SELECT @PollOptions = (SELECT [Option] FROM PollOPtions WHERE PollID = @PollID)
*SELECT @PollPercentages = (SELECT [Option], COUNT([Option]) As Num_Votes FROM Votes WHERE PollID = 1 GROUP BY [Option])
The final part(*) of this SQL will return more than one value, so is it possible for me to return all that information in one varaible with one SELECT query?? Or would I need to use a loop and query a value at a time, and store it into a delimited string?
thx in advance...
View 3 Replies
View Related
