and so on following the series for every set of same ID with 5 entries for each ID
I need to Find Maximum interval time for each ID and for condition in given message (between message like Start and Stop) I used below query and it works fine
select Id, max(CreatedDate) AS 'MaxDate',min(CreatedDate) AS 'MinDate',
DATEDIFF(second,min(CreatedDate),max(CreatedDate)) AS 'MaxResponseTimeinSeconds' from Table where Id in (
SELECT distinct Id
from Table
where Message like 'stop')
group by Id
Above query displays max response time for ID A00ze as 20 minutes, but stop message has occured at 7.15. I would need to modify the query to return max response time as 15 min(from 7.00 to 7.15).
Difference of starttime(where A00ze id started) and stoptime(where stop string is found in message).
HI all,In SQL Server, i have a function which will return a table. likecreate function fn_test (@t int) returns table asreturn (select * from table)now i want the function to retun the table based on some condition like belowcreate function fn_test(@t int) returns table asif @t = 1 return (select * from table1)else return (select * from table2)It is not working for me. Please give me your suggesstions. It's very urgent.Thank you in advance....
My requirement is below.enhancing the T- sql query as I was told not to use SSIS.
Insert data from Table A to Table B with conditions:
1. Truncate gender to one character if necessary.
2. Convert character fields to uppercase as necessary.
3. For systems that supply both residential and mailing addresses, use the residential address if available (both street_address and zip fields have value), mailing address otherwise.
In SSIS I took conditional split with 'ISNULL(res_street_address) == TRUE || ISNULL(res_zip) == TRUE '
default outputname :Consider Res Address; Outputname:Consider mail address.
and mapped as:
(Table A) mail_street_address---street address(Table B)
(Table A) mail_city----------------City(Table B)
(Table A) mail_Zip----------------Zip(Table B)
(Table A) mail_state-------------state(Table B)
(Table A) res_street_address--street address(Table B)
(Table A) res_city---------------City(Table B)
(Table A) res_Zip----------------Zip(Table B)
(Table A) res_state--------------state(Table B)
I want to do the same with T-sql code too:
I came up with below T-SQl but unable to pick(street,city,state,zip columns as I have take combination of street and zip from Table A not individual columns as I wrote in below query) based on above condition(3):
Insert into TABLE B SELECT Stats_ID ,UPPER(first_name) first_name ,UPPER(middle_name )middle_name ,UPPER(last_name) last_name ,UPPER(name_suffix) name_suffix
hello all,this might be simple:I populate a temp table based on a condition from another table:select @condition = condition from table1 where id=1 [this will giveme either 0 or 1]in my stored procedure I want to do this:if @condition = 0beginselect * into #tmp_tablefrom products pinner joinsales s on p.p_data = s.p_dataendelsebeginselect * into #tmp_tablefrom products pleft joinsales s on p.p_data = s.p_dataendTha above query would not work since SQL thinks I am trying to use thesame temp table twice.As you can see the major thing that gets effected with the condictionbeing 0/1 is the join (inner or outer). The actual SQL is much biggerwith other joins but the only thing changing in the 2 sql's is the joinbetween products and sales tables.any ideas gurus on how to use different sql's into temp table based onthe condition?thanksadi
-The data is displayed in a table -The table groups by one field -Each table row calls a subreport -There is about 6 paramaters in the report -The last paramater of the list of paramters is a multivalue paramater and based on what is selected in the list the corresponding subreport must be shown. -So i use a custom vbscript funtion to determine if a specific value was selected or not. This functionality is working fine.
My problem is if the user does not select all the values in the multi select then i want to make the row invisble and remove the whitespace so that there is not a gap between the other subreports which is shown.
I can make the subreport invisible inside the row but there is still the white space which does not display very nicly.
How can i make the row invisible if the vbscript function that is called returns a false value?
Here is the funtion I call -> Code.InArray("ValueToSearchFor", Parameters!MultiValueDropDown.Value)
i have the folowing databases DB1,DB2,DB3,D4,DB5........
i have to loop through each of the databases and find out if the database has a table with the name 'Documents'( like 'tbdocuments' or 'tbemplyeedocuments' and so on......)
If the tablename having the word 'Documents' is found in that database i have to add a column named 'IsValid varchar(100)' against that table in that database and there can be more than 1 'Documents' table in a database.
Can someone give me a clue on this. I'm trying to insert values based off of values in another table.
I'm comparing wether two id's (non keys in the db) are the same in two fields (that is the where statement. Based on that I'm inserting into the Results table in the PledgeLastYr collumn a 'Y' (thats what I want to do -- to indicate that they have pledged over the last year).
Two questions
1. As this is set up right now I'm getting NULL values inserted into the PledgeLastYr collumn. I'm sure this is a stupid syntax problem that i'm overlooking but if someone can give me a hint that would be great.
2. How would I go about writing an If / Else statement in T-SQL so that I can have the Insert statement for both the Yes they have pledged and No they have not pledged all in one stored proc. I'm not to familar with the syntax of writing conditional statements within T-SQL as of yet, and if someone can give me some hints on how to do that it would be greatly appriciated.
Thanks in advance, bellow is the code that I have so far:
RB
Select Results.custID, Results.PledgeLastYr From Results, PledgeInLastYear Where Results.custID = PledgeInLastYear.constIDPledgeInLastYear Insert Into Results(PledgeLastYr) Values ('Y')
I appreciate how difficult it is to resolve a problem without all theinformation but maybe someone has come across a similar problem.I have an 'extract' table which has 1853 rows when I ask for all rows whereperiod_ = 3. The allocation table for info has 210 rows.I have two scripts below. The first script where I specify a period on ajoin, brings back 1853 lines and works. The second script where I specifythe period in the where clause only brings back 1844 rows. I have locatedthe missing 9 rows and they don't look any different to the other 1844 rows.Can someone educate me as to the difference between specifying a conditionon a join and a condition in a where clause.SELECTa.costcentre_,b.nett_,a.*,b.*FROMextract aLEFT OUTER JOINallocation bONa.e_reg_ = b.reg_no_ANDb.period_ = 3WHEREa.period_ = 3--------------SELECTa.costcentre_,b.nett_,a.*,b.*FROMextract aLEFT OUTER JOINallocation bONa.e_reg_ = b.reg_no_WHEREa.period_ = 3ANDb.period_ = 3
Hello-I'm fairly new to writing SQL statements and would greatly appreciatesome help on this one.I'm working on a project for a non-profit that I volunteer for. Partof the database tracks membership using tables like this:PersonInfo-------------------PersonID (primary key)FirstNameLastNameetc..PeopleMemberships-------------------PPLMembershipIP (primary key)PersonIDMembershipTypeIDFeePaidMembershipTypes--------------------MembershipTypeID (primary key)MembershipYearStandardFeeMembershipDescription (varchar)Just because a person is in PersonInfo, doesn't mean they have anythingin PeopleMemberships (they can be in the databse for other reasons andnot have or have ever had a membership).Membership fees vary by year and type of membership and they want toretain a history of a person's memberships.What I'm looking to do here is write a query (a view in SQL Server)that will return the following InfoPersonID, MostRecentMembershipYear, FeePaidForThatMembership,DescriptionOfThatMembershipI'm thinking that I'd use max(MembershipYear), but that requires groupby for the other columns, so I'm getting all of the people'smemberships returned.I'm pretty sure this can be best done with a subquery, but I'm not surehow.Can someone please point me in the right direction or provide a samplethat I can learn from?Kindly,Ken
I have table "Clients" who have associated records in table "Mailings" I want to populate a gridview using a single query that grabs all the info I need so that I may utilize the gridview's built in sorting. I'm trying to return records containing the next upcoming mailing for each client.
The closest I can get is below: I'm using GROUP BY because it allows me to return a single record for each client and the MIN part allows me to return the associated record in the mailings table for each client that contains the next upcoming 'send_date'
SELECT MIN(dbo.tbl_clients.client_last_name) AS exp_last_name, MIN(dbo.tbl_mailings.send_date) AS exp_send_date, MIN(dbo.tbl_mailings.user_id) AS exp_user_id, dbo.tbl_clients.client_id, MIN(dbo.tbl_mailings.mailing_id) AS exp_mailing_idFROM dbo.tbl_clients INNER JOIN dbo.tbl_mailings ON dbo.tbl_clients.client_id = dbo.tbl_mailings.client_idWHERE (dbo.tbl_mailings.user_id = 1000)GROUP BY dbo.tbl_clients.client_id The user_id set at 1000 part is what makes it rightly pull in all clients for a particular user. Problem is, by using the GROUP BY statement I'm just getting the lowest 'mailing_id' number and NOT the actual entry associated with mailing item I want to return. Same goes for the last_name field. Perhaps I need to have a subquery within my WHERE clause?Or am I barking up the wrong tree entirely..
I'm trying to join two tables based on a like condition. The first table contains the full IP, e.g. '166.27.12.24' and the second contains a 2 octet range, e.g. '166.27', which I need to join.
I have a column with serial numbers 1, 2,3,4,....etc...I want to have P1 for first 4 serial numbers to be displayed in a separate column beside Serial number column and for the next four serial numbers (5,6,7,8) it should be P2 and like that I want till P13 and for next again it should start with P1(I mean after P13 it should give again P1 instead of P14) and continue the same process.
Column name of Serial number is [S.No] table name for example is #temp1
I am facing a challenge and hope some one can help me with the query.
I have a school. School have classrooms. Classrooms are divided into various sections (Section A, Section B and so on) . Sections have subsections. Every student is allocated a rollnumber in that section.(Subsection is just for dividng the sections. it has no other use.) Now the student is given a choice to specify his own roll( DesiredRoll) in that section. If two children select the same rollno, then the system internally allocates a trackingno.(There can be multiple roll no as these are allocated manually by admin). Let me demonstrate this:
So when the first entry is made in the db, and let us say that the section to be allocated is A, RollNo is 1 and the DesiredRoll is 1
Student 1 Section A Subsection 1 Roll No 1 DesiredRoll 1 TrackingNo 0
The second entry is made in the db and let us say the section to be allocated is A, RollNo is 2 and the DesiredRoll is 2
Student 2 Section A Subsection 1 Roll No 2 DesiredRoll 2 TrackingNo 0
Now let us say there is a 3rd entry the section to be allocated is A, RollNo is 3 but the DesiredRoll is 1. Now since the DesiredRoll has already been taken, we will allocate the DesiredRoll 1, however now the trackingNo will be 1
Let us say there is a 4th entry is made, the section to be allocated is A, RollNo is 4 but the DesiredRoll is again 1. Now since the DesiredRoll has already been taken, we will allocate the DesiredRoll 1, however now the trackingNo will be 2
Similarly this logic will work for different sections. How will I write a query so that I can detect this scenario and increment the tracking no or allocate a tracking no of 0 if there is a new entry made in that section
My question is that: Just one month before subscriptionendperiod that is on 11/20/2005(mm/dd/yyyy) an automatic email should go to david@john.com with the message 'Your subscription period ends on 12/20/2005'
How to write trigger for this.
Please Note : No ASP code is invloved in this. Only MSSQL coding to be done.
For UserA : - For problemID 1 -> submitted three times -> rejected for first two submission and accepted on third submission. - For problemID 2 -> submitted one time -> accepted on first submission
For UserB : - For problemID 1 -> submitted two times -> rejected for first submission and accepted on second submission. - For problemID 2 -> submitted one time -> accepted on first submission
Now I would like to process the table and want to get the following result :
Explanation : - For each rejected submission, a -2 point penalty. - UserA have submitted probelmID 1 - > score of problemID 1 is 10. - > first two times rejectd - > third time accepted. -> score = 10 - 4 = 6 - UserA have submitted problemID 2 - > score of problemID 2 is 30 - > first time accepted. No penalty will be counted - > score = 30
I have a table where I need to concatenate and sum based on conditions given below .
CREATE TABLE #DimOrder ( [ID] [INT] IDENTITY(1,1) NOT NULL, [OrderID] [INT] NOT NULL, [SalesRegion] [VARCHAR](5) NULL, [OrderType] [INT] NOT NULL,
[Code] ....
Example SELECT 1296 AS OrderID, 2547 AS ProjectID,364 AS ProductID,6 AS FormatID,66 AS MEdiaTypeID,'Fast Track,Fast Track' AS ProductComment,'sq mi' AS UOM,'Y' AS FormatName,'LTO4_800' AS MEdia ,41.67000 AS aPPLIEDRATE
IF OrderID,PrjectID,ProductID,FormatID,MediaTypeID AND AppliedRate AND ProductComment IS different , THEN I want TO concetenate ProductComment AND sum AppliedRate
Example SELECT 1207 AS OrderID, 2351 AS ProjectID,364 AS ProductID,6 AS FormatID,32 AS MEdiaTypeID,'no charge,final volume' AS ProductComment,'sq mi' AS UOM,'Y' AS FormatName,'3590E' AS MEdia ,55.56000 AS AppliedRate
I have one main report which has 5 subreport. i dont want to show all the sub reports all the time. i want to suppress any subreport based on some conditioned. can i do it in case of the SSRS. How?
I have two tables : Students and StuHistory. The structure of the Student table is as follows :
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Student]') AND type in (N'U')) BEGIN CREATE TABLE [dbo].[Student]( [RID] [int] NOT NULL, [Class] [int] NULL, [Section] [char](1) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [SubSection] [int] NULL, [RollNo] [int] NULL, [DesiredRoll] [int] NULL, [TrackingNo] [int] NULL, [Original_rollno] [int] NULL, [StudentStatus] [int] NULL ) END GO
A section has subsections where students are allocated rollno's. Every student has a unique roll no in that subsection. However he is also given a choice to enter his desired roll no. If more than one student choose the same desired roll no in that subsection/section, there is a [TrackingNo] field that then starts keeping a count. For the first unique desired roll no in that subsection/section the tracking no is always 0. [StudentStatus] represents the following : (-1 for deleted, 0 for edited, 1 for newly inserted).
After every fortnight, i have to run a batchquery that does the following:
1. all students marked with -1 are moved to a table called StuHistory which has the same structure as that of Student.
2. Now oncethe -1 status students are moved, there will be a gap in the roll no. I want to reallocate the rollnos now, where rollnos = desired roll no taking into consideration the trackingno
So if 4 students have chosen the desired roll no as 5 and their current roll no is scattered in a subsection lets say 7, 10, 14,16, then while rearranging they will be together(grouped by subsection/section) and will be allocated roll no's 5,6,7,8. The other students will be moved down based on their desired roll nos. Over here i have to also fill the gaps caused because of the students who were deleted.
How do i write query for this? I have been struggling.
I thought of posting this as a new post as it was mixed in the previous post.
I have a table where the date and time stamp are logged together and I want to only show the date in a 10 character output. Also I want to return as blank some dates in the field that are 01/01/1800.
The current table format is 2013-06-28 00:00:00:000..I just want the date. I was using RTRIM function but it keeps erroring out.
When the value of Downtime is greater than 0:00:10 I would like to have the background of that cell to be Red and its font bold. How to accomplish this in query?
Here we need consider patient dates that fall between sdate and edate of the patientrefs table, and then we need to consider the highest status values in order (for example, the highest values in order - 2 is first highest, 4 is second highest, 3 is third highest, and 1 is fourth highest value)
If the date falls between multiple different sdate and edate with the same status values, then we need to consider the latest sdate value and from that entire record we need to extract that value.
Here, pn=2 values have dates which fall between sdate and edate of patientref table. Then we give highest values status is 2, and status 2 values have two records, then we go for max sdate(latest sdate). Then this pn=2 latest sdates is 2015-02-10 and we need to retrieve the corresponding edate and status values.
pn = 4donot have sdate and edate and status values dut not fall conditon
select p.pn,p.code,p.[date],p.doctorcode,pr.sdate,pr.edate,pr.[status] from patient p outer apply (select top 1 pr.pn,pr.code,pr.sdate,pr.edate,pr.[status] from patientref pr where pr.pn=p.pn and pr.code=p.code and p.date between pr.sdate and pr.edate order by case when pr.status=2 then 1 when pr.status=4 then 2 when pr.status=3 then 3 when pr.status=1 then 4 end ,pr.sdate )pr
but this query not given expected result.here when dos not fall between sdate and edate that records not given in the above query. I required that records also.if not fall b/w condition then we need retrive that records empty values for that records.
RO1 BOOK RL1 PDF/ECOPY RO2 PAPER RL2 CONFERENCE RO5 JOURNAL RL11 OTHER
Now, on the above query I want to insert three extra columns with the name (status, location and contact) where the results in the extra three columns would be based on the conditions I want to define in the query based on the above results…
Something for example (I am not trying to write a condition: my question is how to write it),
if column_code1 = RO1 and column_description2 = PDF/ECOPY on status column it should return a value ‘ONLINE’ & on location column it should return ‘WEB’ and on contact column it should write ‘BOB’.
Also, if column_code1 = RO5 and column_description1 = JOURNAL on status column it should return a value ‘ON PRESS FOR PRINT’ & on location column it should return ‘S.R STREET, LONDON’ and on contact column it should write ‘SMITH’ like below result…so the final output should be the top four columns and the extra three columns…
See the attachment for better formatting...
--------------------------------------------------------------------------------------------- status location contact --------------------------------------------------------------------------------------------- ONLINE WEB BOB ON PRESS FOR PRINT S.R STREET, LONDON SMITH
I want to write a query that will cycle through the results and if it comes across another record that has a matching Table.ID I want to exclude that row from the result set.
I am not all too familiar with how to use either a Case or If..Else Statement within a Sql statement that would accomplish this.
I have written a merge Statement where i am facing trouble to delete the data basing on Where Clause Condition.
1) Case 1 : For example i have inserted Data from Source to Target based on Date Key Condition.Take an Instance 10 Records Inserted. 2) Case 2 : For example some changes in the records and it has been updated through the Merge Statement . 3) Case 3 : For the Same Date key based on Conditions now three records has came and need to be inserted and rest should be deleted for that Date Key.
How i need to proceed on this before 10 records are not getting deleted and new records adding for that one
My Example Code :
MERGE INTO TargetTable AS Target USING ( SELECT DISTINCT Col1, Col2 FROM Table1 AS cga ) ON dad.AnchorDate = CASE
Every Employee should be in Department 2 and 3 (as example EmpID = 17 has DepID 2 and 3 from above table). But when any of the employees either exists only in any one department (as EmpID = 12 has only DepID = 2), then a new row should be added to the table for that employee with that missing DepID.
I have a source table with App_Id, App_Type , Tier_Type, Date_Id as columns. I have a destination table with Date_Id, Total_App_Count, Booked_App_Type_Count, Approved_App_Type_Count columns.
I need to count the Total number of records , count of records with App_Type = "Booked" and count of records with App_Type = "Approved" and populate in my destination table.
What all the steps i need to create in SSIS to get this results ?
I have a subreport added to the main report and I want to make this report visible only when the parameter value is met.
Ex, I have a parameter CustName in the main report and want to show the subreport when the custName = xxxxx. There reports are parameter driven not data driven reports.
