Can anyone just point me in the right direction. All I want to do is add some T-SQL to an existing stored procedure to return the number of rows selected into a return value.
Does anyone know how to do this?
hi,i have a stored procedure like this in SQL server ,it returns proper value if data is there for a given id.But if there is no data,it returns row/rows of NULL value and that is counted towards "number of row returned"..Shouldn't it be like,if there are null values in a row,that row should not be counted towards rows returned value .?Rightnow if no value returned from either of the select,it still returns as 2 rows instead of 0 rows.How do handle this situation in SQL? thanks for your help
SELECT SUM(col1) AS SUM_COL1, SUM(col2) AS SUM_COL2, SUM(col3) AS SUM_COL3, SUM(col4) AS SUM_COL4FROM TABLE1WHERE (ID = nn) UNION all
SELECT SUM(col22) AS SUM_COL22 ,cast(null as int) as c1,cast(null as int)as c2,cast(null as int) as c3FROM table2WHERE TABLE2 = nn)
I have a Dataset that I am populating from a SQL Query. I am then using the dataset to populate a report in Reporting Services. What I want to do is return a standard number of rows in my dataset. (Let's say 10.) Even if my query does not have any rows in it, I want 10 empty rows returned to the dataset. If my query has 7 rows in it then I want to add on 3 empty rows and return it. I will not have more than the standard number of rows.
I cannot get the table in the report to show up if the dataset is empty, but still want the table to display with 10 empty rows. I have searched how to do this online but am getting nowhere. (I know how to add one empty row but not a set number.
Im am trying to return the number of rows in a table and i only can get a response of true thanks for any help
View 3 Replies View RelatedHello,
Any help would be greatly appreciated. I have a single row that looks like this.
Cust, Add, Item, Value
1 ST 258 6
I want to return six rows based on the value and the value could be any number.
All of the row information will stay the same except the Value that will count off of the original value.
Cust, Add, Item, Value
1 ST 258 1
1 ST 258 2
1 ST 258 3
1 ST 258 4
1 ST 258 5
1 ST 258 6
I have a policy table which has policyNumbers and createDate. I need to retrieve all rows where createDate is between 2 dates and there is more than 1 row with the same policy number. I cannot figure out the SQL to return all policy number rows if there are more than 1 row with the policy. Most policies number will be in the table once. I need the others.
Thanks for suggestions.
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
Recently I had an application developer approach me and asked if I could provided him with a list of sprocs by returned row count. We had an issue where the application passed in a number of parameters which attempted to return 200k plus rows of data and the application was timing out. He changed the required parameters in the application and a reasonable number of rows were returned as expected. Short term solution to this one problem.
However there are always timeout issues with this particular application and we got to thinking that maybe other sprocs that were called using parameters would also fail at some point in time because too much data was being returned.
Hi,
i read from help files that "For UPDATE, INSERT, and DELETE statements, the return value is the number of rows affected by the command. " Anyone know how to get the return value from the query below?
Below is the normal way i did in vb.net, but how to check for the return value. Please help.
========
Public Sub CreateMySqlCommand(myExecuteQuery As String, myConnection As SqlConnection)
Dim myCommand As New SqlCommand(myExecuteQuery, myConnection)
myCommand.Connection.Open()
myCommand.ExecuteNonQuery()
myConnection.Close()
End Sub 'CreateMySqlCommand
========
Thank you.
Can someone look at this and tell me where I went wrong? I'm trying to return all duplicate rows that have the same lastName and Address. It returns rows but they don't look like dups.SELECT TOP (100) PERCENT dbo.tblClient.LastName, dbo.tblClientAddresses.Address
FROM dbo.tblClient INNER JOIN
dbo.tblClientAddresses ON dbo.tblClient.Client_ID = dbo.tblClientAddresses.Client_ID
GROUP BY dbo.tblClient.LastName, dbo.tblClientAddresses.Address
HAVING (COUNT(dbo.tblClientAddresses.Address) > 1)
ORDER BY dbo.tblClientAddresses.Address
Hi,Should be quite simple but can someone please tell me the best way tocount the number of rows in an UNION ALL statement.I tried using @@ROWCOUNT but that doesn't seem to contain the correctnumber.Also, I assume that running the query again but just returning count(*)instead of the data is horribly inefficient (plus the code is thenbloated.)?Thanks,Mark
View 1 Replies View RelatedI have a stored procedure which contains a complex scripting that is not an option to rewrite as a single SELECT statement.
I want the following output:
CatID | CatTitle | CatTree
001 | News | exec sp_DisplayTree(@CatID)
My code I tried doesn't work:
SELECT
C.CatID As CatID,
C.CatTitle As CatTitle,
CatTree = (exec sp_DisplayTree C.CatID)
FROM
Cats As C WITH (nolock)
I cannot find a solution to my solution, please help...
A table has a column of int type. I need to select a fixed number of rows for each value. For example, if data in that column (c) are 5, 6, 7, and the number I want to select is 2, then I need 2 rows from c=5, 2 from c=6, and 2 from c=7. How to write that query? Any idea?
Thanks.
I am working on a multi-page datagrid that pulls data from a database. The issue I am running into is the SQL select query. What I have is a table to 55 items. What I need to do is grab the first 35 of those items and bind the resulting DataReader to the grid, print the page, then grab the remaining 20 items, bind to the grid and print the page.
I can use "SELECT TOP 35 FROM Table" to get the first 35 items, but I don't know how to get the remaining 20 items. Is there a way to say something like "SELECT TOP 20 FROM Table" but specify only the rows that begin after row 35?
I tried doing this with an ArrayList but couldn't bind it to the DataGrid.
Any suggestions?
hey all,
I am writing a sproc:
select @strCourseNameRegFor = sal.CourseName , @strSectionNoRegFor = sal.SectionNo,
@dteStartDateRegFor = sal.StartDate, @dteEndDateRegFor = sal.EndDate,
@dteStartTimeRegFor = sal.StartTime, @dteEndTimeRegFor = sal.EndTime,
@strDaysOfWeekRegFor = sal.DaysOfWeek
from lars.dbo.tblSalesCourse as sal, lars.dbo.tblCourseCatalog as cat
where sal.SchoolYr = @intRegForYear and rtrim(sal.SchoolTerm) = rtrim(@strRegForTerm) and upper(rtrim(sal.CourseName)) = upper(rtrim(@strCourseNamePrev))
and cat.NewStuAllowed = 0 and sal.CourseName = cat.CourseName and sal.Cancelled <> 1 and cat.SchoolYr = sal.SchoolYr
and sal.MaxNoStudents > sal.CurrNoStudents
I want to check if the select returned an empty set or not. I cannot use @@rowcount because i am assigning the values to the local vars. I tried
if @strCourseNameRegFor is null
begin
set @err = 'No courses';
end
but for some reason even if there are any records in the set, the if condition is getting satisfied. Can anyone help?
I have a table with entries tied to a membership database. The problemis that I want to select a limit of sixteen entries per member, perday, where some members have 16+ entries per day.I have this so far ( which I've simplified for this post)SELECT dbo.members.firstname, dbo.members.lastname,dbo.entries.gameDayFROM dbo.members INNER JOINdbo.entries ON dbo.members.memberID =dbo.entries.memberIDIf it's day 5, each member should have 80 total.How can I change this to select only 16 entries for each member, makingsure it's 16 per day based on dbo.entries.gameDay?Thanks for your help.
View 2 Replies View RelatedHi,
Im using a select statement to query out the data from a table.
ex:- select * from tblperson
Now this select statement is returning me 500 rows
I want to see only the records between 100 - 200 out of these 500 rows..
Anyone help
I have a SELECT statement with multiple JOINs. I want to number the rows returned by this SELECT statement. What's the easiest way to do this?
My current SELECT statement returns this:
ProjectId -- TaskId -- TaskName
123 - 111 -- Do something
123 - 222 -- Do something else
123 - 333 -- Do one more thing
I want to return this:
ProjectId -- TaskId -- TaskName -- Sequence
123 - 111 -- Do something -- 1
123 - 222 -- Do something else -- 2
123 - 333 -- Do one more thing -- 3
I am writing some functions that work on a time series database of prices, ie volatility, correlation. I need to use the SELECT TOP syntax, but cannot do this with a variable, ie 'SELECT @x TOP * from prices'. My solution is to simply have a function for each potential period that will be looked at - 30day_volatility, 60day_volatility, etc. I looked at setting the ROWCOUNT variable but this is not allowed in functions. I haven't posted any DDL because I think the question is general enough - How do I return n ordered rows from a function without using SELECT TOP, or is there a way to use SELECT TOP with a variable that I am not aware of.
Thanks!
Hello all,
I have been working with a DetailsView control for the past week and it is a great control, but also lacks on some departments. Anyhow I need to know what the best approach for this scenerio would be?
I have a SqlDataSource"
<asp:SqlDataSource ID="SqlUpsertAffiliateDetails" runat="server" ConnectionString="<%$ ConnectionStrings:connectionstring %>"
SelectCommand="SELECT am.affiliate_id AS AffiliateId, am.member_id AS MemberId, m.First_Name, m.Last_Name, am.category_id AS CategoryId, ac.category_name, am.profile_web_address AS WebAddress, am.profile_email_1 AS Email, am.comments AS Comments, am.date_modified FROM tAffiliateMaster AS am WITH (NOLOCK) INNER JOIN tAffiliateCategories AS ac WITH (NOLOCK) ON am.category_id = ac.category_id INNER JOIN rapdata..Member AS m WITH (NOLOCK) ON am.member_id = m.Member_Number WHERE (am.affiliate_id = @AffiliateId)"
UpdateCommand="spUpsertAffiliateProfile" UpdateCommandType="StoredProcedure">
<SelectParameters>
<asp:QueryStringParameter Name="AffiliateId" QueryStringField="affiliate_id" />
</SelectParameters>
<UpdateParameters>
<asp:Parameter Name="Action" Type="Byte" DefaultValue="2" />
</UpdateParameters>
</asp:SqlDataSource>
And my SP:/* 09-19-07 Used to update affiliate profile */
CREATE PROCEDURE spUpsertAffiliateProfile
@Action tinyint,
@AffiliateId int,
@MemberId int = -1,
@CategoryId int,
@WebAddress varchar(50),
@Email varchar(50),
@Comments varchar(1500)
AS
SET NOCOUNT ON
-- Find errors first, check is not needed if deleting
IF @Action <> 3
IF NOT EXISTS (SELECT Member_Number FROM rapdata..Member_Association WHERE Member_Number = @MemberId AND Status = 'A' AND Association_ID = 'TRI' AND Bill_Type_Code LIKE '%AF%')
BEGIN
SELECT retval = 'A qualified member ID was NOT found. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1
IF EXISTS (SELECT member_id FROM tAffiliateMaster WHERE member_id = @MemberId)
BEGIN
SELECT retval = 'This member has already been listed. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1 AND @AffiliateId = 0-- insert
BEGIN
INSERT INTO tAffiliateMaster
(member_id, category_id, profile_web_address, profile_email_1, comments)
VALUES
(@MemberId, @CategoryId, @WebAddress, @Email, @Comments)
SELECT retval = 'Record Entered', errorcount = 0, @@IDENTITY AS affiliate_id
RETURN
END
ELSE IF @Action = 2 AND @AffiliateId > 0-- update
BEGIN
UPDATE
tAffiliateMaster
SET
category_id= @CategoryId,
profile_web_address=@WebAddress,
profile_email_1=@Email,
comments=@Comments
WHERE
affiliate_id = @AffiliateId AND member_id = @MemberId
SELECT retval = 'Record Updated', errorcount = 0, @AffiliateId AS affiliate_id
RETURN
END
ELSE IF @Action = 3 AND @AffiliateId > 0-- delete
BEGIN
DELETE
tAffiliateMaster
WHERE
affiliate_id = @AffiliateId
SELECT retval = 'Record Deleted', errorcount = 0, 0 AS affiliate_id
RETURN
END
GO
My question is how will I be able to return the retval? Will I need to do it within the code behind of the SqlDataSource Updated Event?
Thanks!
hey all,
I have the following query:
ALTER PROCEDURE [dbo].[sp_SelectMostRecentArticle]
AS
BEGIN
DECLARE @article_id INT
SELECT @article_id = (
SELECT TOP 1 article_id
FROM article
ORDER BY article_id DESC
)
DECLARE @comment_count INT
SELECT @comment_count = (
SELECT COUNT(comment_id)
FROM comment
JOIN article ON article_id = comment_article_id
GROUP BY article_id
HAVING article_id = @article_id
)
SELECT TOP 1 article_id, article_author_id,
article_title, article_body, article_post_date,
article_edit_date, article_status, article_author_id
article_author_ip, author_display_name,
category_id, category_name--, comment_count AS @comment_count
FROM article
JOIN author ON author_id = article_author_id
JOIN category ON category_id = article_category_id
GROUP BY article_id, article_title, article_body, article_post_date,
article_edit_date, article_status, article_author_ip,article_author_id,
author_display_name, category_id, category_name
HAVING article_id = @article_id
END
GO
as you can see, im trying to return a comment_count value, but the only way I can do this is by defining the variable.
I have had to do it this way, because I cannot say COUNT(comment.comment_id) AS comment_count or it returns an error that it cant reference the comment.comment_id.
But when change it to FROM article, comment; I get errors about the article_author_id and article_comment_id.
And i cant add a join, because it would return the amount of rows of the comment...
unless someone could help with what i Just decribed (as i would prefer to do it this way), how would i return the variable value as part of the select statement?
Cheers
I have concatenated a long Select Statement and assigned it to a variable. (i.e.)
@a = Select * from foo ---Obviously mine is much more robust
How do I execute @a to actually Select * from foo?
Hey guys,
This is what I think and hope is a fairly straight forward SQL question
Essentially, I have a table which has the following columns that are relevent to my question:
PROJID
ACTIVITY_NAME
COMPLETION_DATE
Rows in this table are, for example:
PROJID ACTIVITY_NAME COMPLETION_DATE
1 Prepro 10/12/2007 3:42:30
2 Prepro 10/13/2007 9:16:27
2 QA 10/13/2007 10:00:01
2 Delivery 10/14/2007 09:31:12
etc.
So, really the key is the PROJID & the ACTIVITY_NAME (really, there's a unique column ID, but for this question, I'll leave it at that).
(Though this should be much easier to accomplish in code, the system is not built that way so) Is there a good way that I could return a status for a given PROJID based on whether a row exists for a given PROJID). In other words, ultimately, I would like to return something like this:
PROJID LAST_ACTIVITY
----------------------------------------------
1 Prepro
2 Delivery
where the activity order (in this case) is Prepro, QA, Delivery. So because a Delivery row exists for PROJID 2, then the LAST_ACTIVITY would return "Delivery" and because only Prepro exists for PROJID 1, the LAST_ACTIVITY returned would be Prepro
I really appreciate the help
Thanks,
Steve
I am using SQL 2014 RTM (may be it's time to upgrade).
I have the following view:
create view [dbo].[SiriusV_Max4SaleList]
as
select m.id as Max4SaleId,
mt.[Description] as [TypeDescription],
CAST(m.[type] as tinyint) as [Type],
m.start_time as [StartTime],
m.end_time as [EndTime],
[Code] ....
I am thinking I may want to remove CAST for department, category, item later on as I don't really care if these columns would be defined as key for my EF model, but I do want to search by these columns. Anyway, this is my current view.
I executed the following select statement once
select * FROM dbo.siriusv_max4saleList where department like 's%' or category like 's%' or item like 's%'
And I believe I got 29 rows initially. However, when I execute this statement now I'm getting just 13 rows. If I execute just the department like 's%' I am getting 0 rows although I can see in the first result a row where department has s in in.
I guess I keep it here since I've created the message already but now I figured out why I am not getting the expected result. I used the condition like 's%' and not like '%s%' which application is doing.
If I try to run the code below, and even one of the values in the INNER
JOIN statements is NULL, the DataReader ends up with zero rows.
What I need is to see the results even if one or more of INNER JOIN
statements has a NULL value. For example, if I want info on
asset# 2104, and there's no value in the DriverID field, I need the
rest of the data to display and just have the lblDriverName by
blank. Is that possible?
<code>
Sub BindSearchGrid()
Dim searchUnitID As String
Dim searchQuery As String
searchUnitID = tbSearchUnitID.Text
lblIDNum.Text = searchUnitID
searchQuery = "SELECT * FROM Assets " & _
"INNER JOIN Condition ON Condition.ConditionID = Assets.ConditionID " & _
"INNER JOIN Drivers ON Drivers.DriverID = Assets.DriverID " & _
"INNER JOIN Departments ON Departments.DepartmentID = Assets.DepartmentID " & _
"INNER JOIN AssetCategories
ON AssetCategories.AssetCategoryID = Assets.AssetCategoryID " & _
"INNER JOIN Store ON
Store.[Store ID] = Assets.StoreID WHERE RTRIM(Assets.[Unit ID]) = '"
& searchUnitID & "'"
Dim myReader As SqlDataReader
myReader = Data.queryDB(searchQuery)
While myReader.Read
If
Not IsDBNull(myReader("Store Name")) Then lblStrID.Text =
myReader("Store Name")
If
Not IsDBNull(myReader("AssetCategory")) Then lblAsstCat.Text =
myReader("AssetCategory")
If
Not IsDBNull(myReader("Condition Description")) Then lblCondID.Text =
myReader("Condition Description")
If
Not IsDBNull(myReader("DepartmentName")) Then lblDepID.Text =
myReader("DepartmentName")
If
Not IsDBNull(myReader("Unit ID")) Then lblUnID.Text = myReader("Unit
ID")
If
Not IsDBNull(myReader("Year")) Then lblYr.Text = myReader("Year")
If
Not IsDBNull(myReader("Make")) Then lblMk.Text = myReader("Make")
If
Not IsDBNull(myReader("Model")) Then lblMod.Text = myReader("Model")
If
Not IsDBNull(myReader("Mileage")) Then lblMile.Text =
myReader("Mileage")
If
Not IsDBNull(myReader("Vin Number")) Then lblVinNum.Text =
myReader("Vin Number")
If
Not IsDBNull(myReader("License Number")) Then lblLicNum.Text =
myReader("License Number")
If
Not IsDBNull(myReader("Name")) Then lblDriverName.Text =
myReader("Name")
If
Not IsDBNull(myReader("DateAcquired")) Then lblDateAcq.Text =
myReader("DateAcquired")
If
Not IsDBNull(myReader("DateSold")) Then lblDtSld.Text =
myReader("DateSold")
If
Not IsDBNull(myReader("PurchasePrice")) Then lblPrPrice.Text =
myReader("PurchasePrice")
If
Not IsDBNull(myReader("NextSchedMaint")) Then lblNSM.Text =
myReader("NextSchedMaint")
If
Not IsDBNull(myReader("GVWR")) Then lblGrVWR.Text = myReader("GVWR")
If
Not IsDBNull(myReader("GVW")) Then lblGrVW.Text = myReader("GVW")
If
Not IsDBNull(myReader("Crane Capacity")) Then lblCrCap.Text =
myReader("Crane Capacity")
If
Not IsDBNull(myReader("Crane Certification")) Then lblCrCert.Text =
myReader("Crane Certification")
If
Not IsDBNull(myReader("Repair Cost")) Then lblRepCost.Text =
myReader("Repair Cost")
If
Not IsDBNull(myReader("Estimate Replacement")) Then lblEstRep.Text =
myReader("Estimate Replacement")
If
Not IsDBNull(myReader("SalvageValue")) Then lblSalVal.Text =
myReader("SalvageValue")
If
Not IsDBNull(myReader("CurrentValue")) Then lblCurVal.Text =
myReader("CurrentValue")
If
Not IsDBNull(myReader("Comments")) Then lblCom.Text =
myReader("Comments")
If
Not IsDBNull(myReader("Description")) Then lblDesc.Text =
myReader("Description")
End While
End Sub</code>
Is there a SELECT statement that will return a the column names of a given table?
View 5 Replies View RelatedMy example data as this:
ID code1 code2
1 a m
1 b n
1 c T
2 d m
2 e n
2 f n
3 g m
3 h n
3 i T
I would like to have a select stmt that check for all same ID and code2 does not contain T, then return the records
For example data: the query should return
2 d m
2 e n
2 f n
Is it possible to do this?
Hi
I'm trying to convert and format integer values in a SQL Server select statement to a string representation of the number formated with ,'s (1000000 becomes 1,000,000 for example).
I've been looking at CAST and CONVERT and think the answers there somewhere. I just don'tseem to be able to work it out.
Anyone out there able to help me please?
Thanks,Keith.
Here is the example
state
-----
NY
NJ
CA
NY
NC
NJ
CA
IL
CA
Can we generate a result like this with select statement
state No
----- ---
CA 1
CA 2
CA 3
NJ 1
NJ 2
NY 1
NY 2
IL 1
NC 1
A simple Query to select alternate rows from a table ?
View 9 Replies View RelatedI have a stored procedure on a SQL Server 2008 database. The stored procedure is very simple, just a SELECT statement. When I run it, it returns 422 rows. However, when I run the SELECT statement from the stored procedure, it returns 467 rows. I've tried this by running both the stored procedure and the SELECT statement in the same SSMS window at the same time, and the behavior is the same. The stored procedure is:
USE [REMS]
GO
/****** Object: StoredProcedure [mobile].[GetAllMobileDeviceUsers] Script Date: 12/04/2014 */
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
When I do this in the same SSMS window:
exec mobile.GetAllMobileDeviceUsers
SELECT
ee.EmployeeID,
EmployeeName = LastName + ', ' + FirstName
FROM EmployeeInvData ee
--UNION
[Code] ....
I get two result sets. The first is 422 rows; the second is 467 rows. Why?
I am trying to insert a carriage return in the select statement after the web link where I had highlighted code in bold. When I insert a record into the table, I receive the email with the message body is in single line.I need the result to look like this in the message body:
ALTER TRIGGER [dbo].[SendNotification]
ON [dbo].[TicketsHashtags]
FOR INSERT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[code]....
I have a db that has duplicate customer records.
If I run the following select statment against the appropriate table it returns the duplilcate records in the result set. However, from this list I want to add an additional select statement embedded into the query that will actually return only those records with the most current syscreated date.
Example of script I'm using---
select cmp_fadd1, syscreated, cmp_name, cmp_code
from cicmpy
where cmp_fadd1 in (select cmp_fadd1
from cicmpy
group by cmp_fadd1
having count(1) = 2)
order by cmp_fadd1,syscreated desc
The results is:
Address Syscreated date Customer
1622 ONTARIO AVENUE 2005-06-15 22:19:45.000 RELIABLE PARTSLTD
1622 ONTARIO AVENUE 2004-01-22 18:10:05.000 RELIABLE PARTS LTD
PEI CENTER 2006-01-05 22:03:50.000 P.G. ENERGY
PEI CENTER 2004-01-22 17:57:56.000 P.G. ENERGY
From this I want to be able to select ONLY those records with the most current syscreated date or those records with 2005-06-15 and 2006-01-05
Can anyone help me with creating this?
Thanks
Cyndie