I am using SSIS packages for data transfer in two different databases. I am encountering one scenario in which data in one database in successfull but in other situation it fails . I want to rollback the data back to its original position. I am using multitask to send the data to two different databases. Can anyone guide me through this
View 5 RepliesI'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
I'm able to connect to the Oracle database to insert the data into multiple tables using OLEDB connection via Oracle Provider for OLEDB. However, i wish to create a transaction so that i'm able to rollback all the data in the case where the insertion fails in one of the table. May i know where should i start from?
View 4 Replies View RelatedI am trying to use sql transaction in foreach loop where I am passing 1 ID @ a time .I want to rollback only current ID.1st task in foreach is execute sql task with begin tran and next is data flow task with 2 source and destination for 2 different tables (if anyone fails then rollback from all tables). After data flow is another execute sql task with rollback tran on failure (logical condition on pipe is OR). The rollback works but only rollback 1 table although I want to rollback on current iteration ID of foreach from both tables.
View 3 Replies View RelatedDECLARE @A INT, @B INT,@C INT
SELECT @A=2,@B=3
SELECT @C=@A*@B
SELECT @C
BEGIN TRANSACTION A
SELECT @A
SELECT @B
SELECT @C
END TRANSACTION A
THIS CODE PROCDUE the following errors
Msg 156, Level 15, State 1
Incorrect syntax near the keyword 'END'.
Can anyone help me telling me what I am doing wrong ?
thanks
Ali
Hi
Need a help for the below req.
I have a SP which calls another SP with in a Cursor. The main SP updated two of the DB tables. Based on the data passed from main SP the nested SP updates another two table.
What I want at the end of loop the transaction will be committed. In between if any point it fails means the whole transaction will be rollback.
I am using TRY & CATCH to handle transaction commit & Rollback . But I am getting below error
Error coming in SQL end is:
Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.
Please advise.
Hi,
I have a cursor that deletes records based on the values from another table.
I need to check if any error happens in the delete statement, then i need to roll back all the transactions and display the error message.
Else if there are no errors then i have to commit the tranactions.
How do i check for this and where do i put these conditions.. I need to apply this logic for other scripts too.
Please advise..
Thanks
Below is my query
=================================================
DECLARE Tempcursor1 CURSOR
FOR SELECT ID FROM SITE
DECLARE @ID uniqueidentifier
OPEN Tempcursor1
FETCH NEXT FROM Tempcursor1
INTO @ID
WHILE @@Fetch_Status = 0
BEGIN
DELETE FROM BaseTable
WHERE Id = @ID
DELETE FROM AddBASE
WHERE PARENTID = @ID
FETCH NEXT FROM Tempcursor1
INTO @ID
END
CLOSE Tempcursor1
DEALLOCATE Tempcursor1
I have a pretty simple SSIS package that fast loads a 100 million record table into a SQL Server 2008 table on a daily basis. This normally runs fine and completes in about 1 hour. As this is perhaps one of our largest running SSIS packages, about once every 2-3 weeks this SSIS will fail/drop connection. Once it fails, the large number of records will start rolling back. This rollback process can take 1+ hours so I cannot even restart the failed SSIS package immediately. This is a problem.
I am looking for a solution or option so I do not have to wait on that rollback to restart this particular, long running SSIS package. Is there an option/setting to leave the partial data set committed and not rollback? Then I could just restart the SSIS package immediately or set it the SSIS to auto-restart 1 time on failure. The first step in the SSIS does a truncate of the destination table.
When I write code for a multiple statements transaction do I need to check 'if @@ERROR > 0 ' after each SELECT, INSERT, DELETE or UPDATE statement so that the 'rollback tran' statement can be given, or SQL server will automatically rollback the transaction and we don't need to check for @ERROR > 0 ?
View 2 Replies View RelatedI have a transaction that calls one other sproc and also executes another set of queries, but for some reason I'm getting error 266: "Msg 266, Level 16, State 2, Procedure AddUserHaveTag, Line 26. Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1."There is NO transaction in the sproc AddTag. It is also included below.Here is the sproc with the transaction:1 set ANSI_NULLS ON2 set QUOTED_IDENTIFIER ON
3 go4
5 ALTER PROCEDURE [dbo].[AddUserHaveTag] 6 (7 @UserHaveID int,8 @Tag varchar(24),9 @UserHaveTagExists bit OUTPUT
10 )11 AS12 SET NOCOUNT OFF13 DECLARE @ErrorCode int14 DECLARE @TagID int15 DECLARE @TagExists bit16
17 BEGIN TRAN
18 19 -- Call proc to add tag to Tags table
20 EXEC AddTag @Tag, @TagID OUTPUT, @TagExists OUTPUT
21
22 -- Check for errors
23 IF @ErrorCode <> 0 GOTO ERROR24
25 -- Check for existing record, otherwise insert
26 IF EXISTS (SELECT 1 FROM UserHaveTags WHERE UserHaveID = @UserHaveID AND TagID = @TagID)27 BEGIN28 SET @UserHaveTagExists = 129 RETURN 030 END31 ELSE32 BEGIN33 INSERT INTO UserHaveTags (UserHaveID, TagID) VALUES (@UserHaveID, @TagID)34 SET @UserHaveTagExists = 035 END
36
37 -- Check for errors
38 IF @ErrorCode <> 0 GOTO ERROR39
40 COMMIT TRAN
41
42 ERROR:43 IF (@ErrorCode <> 0)44 BEGIN45 PRINT 'Unexpected error occurred!'
46 ROLLBACK TRAN47 END
Here is the AddTag sproc:1 set ANSI_NULLS ON2 set QUOTED_IDENTIFIER ON
3 go4
5 ALTER PROCEDURE [dbo].[AddTag] 6 (7 @Tag varchar(24),8 @TagID int OUTPUT,9 @TagExists bit OUTPUT
10 )11 AS12 SET NOCOUNT OFF13 14 IF EXISTS (SELECT 1 FROM Tags WHERE Tag = @Tag)15 BEGIN16 SELECT @TagID = TagID FROM Tags WHERE Tag = @Tag17 SET @TagExists = 118 RETURN 019 END20 ELSE21 BEGIN22 INSERT INTO Tags (Tag) VALUES (@Tag)23 SET @TagID = SCOPE_IDENTITY()24 SET @TagExists = 025 ENDAny advice?Also if you see any glaring errors or things I could be doing better, I'm open to suggestions. I'm fairly new to sprocs and transactions. Thanks,Travis
Hello:
I am implimenting the creation of sequence numbers .I use an insert proc on a table that generates the numbers using an identity field:
procedure usp_createidentity
begin transaction
insert into [tblOrderNumber] with default values
rollback ' done so no records in this table
select @OrderNumber = scope_identity()
I call this from another proc that inserts values into my order table:
procedure usp_Insert @OrderNumber int
as
SET XACT_ABORT ON;
BEGIN TRY
BEGIN TRANSACTION
EXEC usp_GetNewOrderNumber @OrderNumber = @OrderNumber output
INSERT INTO [dbo].[tblOrder] ([OrderNumber]) values (@orderNumber) ' inserts value from other stored proc
COMMIT TRANSACTION
END TRY
BEGIN CATCH
if (XACT_STATE() = -1)
ROLLBACK TRANSACTION
else
if (XACT_STATE() = 1)
COMMIT TRANSACTION
END CATCH
Here is the problem. When I run usp_Insert I get the following: Error 266 Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.
This refers to the usp_GetNewOrderNumber that is called inside the other proc as shown above.
The problem does not happen if I put each statement in usp_Insert in its own try/catch. transaction statements.
Maybe it has something to do with the rollback call in the usp_getneworder.
What do I need to do to get rid of this. problem and still run these within one try/catch trans statement set.
Thanks
i'm getting following exception when i try to execute stored procedure.{"Ambiguous column name 'MemberID'.
Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1." }I know why i'm getting "Ambiguous column name 'MemberID'" exception but i dont know why i'm getting"Transaction count after EXECUTE indicates that......" In my stored proc i'm checking if error occured goto :Error_handler where i do ROLLBACK TRAN/* Its failing at MemberID = tTempResult.MemberID bcoz of Ambiguous column name. I know i have to use RebateInstanceItem.MemberID=tTempResult.MemberID */ here is my stored procCREATE PROCEDURE dbo.ExportFile @intMonth INT, @intYear INT, @dtFirstDayOfMonth DATETIMEAS BEGINBEGIN TRANSACTION /* I have some logic here that will select rows into temporary table #TEMPRESULT */ UPDATE dbo.RebateInstanceItem SET ResubmitCreated = @dtmNewCreated FROM #TEMPRESULT tTempResult WHERE MemberID = tTempResult.MemberID AND RebateInstanceItem.IsResubmit = 'Y' AND (RebateInstanceItem.ResubmitCreated = @dtmLastCreated OR RebateInstanceItem.ResubmitCreated IS NULL) IF @@ERROR<>0 GOTO ERR_HANDLER // when error it will goto error_handler that will rollback DROP TABLE #TEMPRESULT IF @@ERROR<>0 GOTO ERR_HANDLERCOMMIT TRANSACTIONRETURN 0ENDERR_HANDLER: ROLLBACK TRANSACTION RETURN 1GO
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
Any help is appreciated.
Thanks
Derrick
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
Hello,
I recently joined a company that is having an issue connecting to SQL Server Integration Services on one of their production servers. When trying to connect via management studio, both locally and remotely, they receive the error below. The server is a 64 bit server and is using third party replication (Veritas).
It sort of sounds like the issue described in this knowledge base article: http://support.microsoft.com/kb/919224. However, we do not have a problem creating maintenance plans. I'd just give it a shot but its a production server and getting approval to do anything that modifies the registry with the registry replication setup is a pain, so I'd like to determine if there could be another cause first.
TITLE: Connect to Server
------------------------------
Cannot connect to ***************.
------------------------------
ADDITIONAL INFORMATION:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
Error loading type library/DLL. (Exception from HRESULT: 0x80029C4A (TYPE_E_CANTLOADLIBRARY)) (Microsoft.SqlServer.DTSRuntimeWrap)
------------------------------
BUTTONS:
OK
------------------------------
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
I click on menu item SSIS and enable logging to my SQL Database (SSIS log provider for SQL Server). When I run the package it runs fine for the first time. Upon subsequent runs I get the following error.
[Log provider "SSIS log provider for SQL Server"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E14 Description: "There is already an object named 'sysdtslog90' in the database.".
It seems like I need to drop the table every time to avoid this error. Is there a way I can log all package logs to single table historically? Any weblink or tip is appreciated.
Thanks!
Palak Mody
Hello experts, I made a huge mistake on a production server, ran an update without the WHERE clause. UPDATE myTableSET Field1 = 'SOmetext',Field2 = 'sometext2'Is there a way to rollback? I read something a while ago about transaction logs.SOS!Thanks
View 4 Replies View RelatedHI,
Suppose I execute any transaction say inserted some rows.
I want to delete my previous transaction using rollback.
What is the proper syntax for that.
In Query Window:
Insert ---------- executed
rollback.
it was asking for name of the transaction. How to give that.
Help me out
Thanks
Bye
This is my stored procedure. Problem is that a rollback does not happen when there is an error ? How can this be, am starting and ending the transaction?
CREATE Procedure opretKunde
(
@cvr int,
@url varchar(200),
@firmaNavn varchar(50),
@adresse varchar(150),
@postnr int,
@fax int,
@tlf int,
@email varchar(200),
@bruger varchar(20),
@kode varchar(32)
)
AS
BEGIN TRANSACTION
INSERT INTO login
(
brugernavn,
kodeord,
type
)
VALUES
(
@bruger,
@kode,
'k'
)
INSERT INTO kunde
(
cvr,
url,
navn,
fax,
tlf,
email,
brugernavn
)
VALUES
(
@cvr,
@url,
@firmaNavn,
@fax,
@tlf,
@email,
@bruger
)
INSERT INTO adresse
(
type,
cvr,
adresse,
postnr
)
VALUES
(
'b',
@cvr,
@adresse,
@postnr
)
COMMIT
GO
Hi,
Can I rollback a database if I have transaction logs?
For example, I want to rollback the database without all the transactions that occurs within the last 10 days.
Thank you.
I tried killing a rollback several times, but it would not disapear.
I came back the next day, it is still there.
Anyone knows how to get rid of a rollback?
Thanks in advance.
Hi:
I have rollback on one of the users. I tried killing
her process through Enterprise Manager and Query Analyzer,
but I still can see her process on the screen. However, her
login is grayed out after I execute the kill query.
I have encountered this problem several times, and the only way
I can get clear the rollback is by rebooting the server.
Does anyone have a sugeestion on how to clear the rollback
without rebooting.
Please advise if you have any suggestion.
Thanks in advance.
Hi All
A question on DTS ROLLBACK CAPABILITY.
Is it possible to setup a DTS pkg to roll back the loaded files if a step fails?
If a step fail records inserted by Data Pump to a table should be removed.
Is this possible? If so how can we achieve this?
Any advice is appreciated.
Thanks
when i give rollback in my QA it gives an error saying (something like this)
- no begin transaction specified
In oracle it works fine why?
how to rollback(undo) record was i deleted???
pls tell me...
Hello every body,
I would like to know the procedure, that how to rollback my transaction in sql server 2000
Hi,
i wanna know something, i inserted some rows of data to a table, but i wanna undo those insertion. How can i do it?
thanks
hi friends,
is it possible to roll back a transaction here? i heard that it will be possible only if we wrote the code only in certain block.please tell me the block.
vinod
The code inserts into table TABLES. TABLES has a primary key.
If the insert statement has no error it should insert 'ROWS INSERTED' to table CONTROL and update table DATETRACKING else insert 'ROWS NOT INSERTED' to table CONTROL and do not update table DATETRACKING.
1- I will like to improve my code if it is possible.
2- Can I use a rollback?
DECLARE @ROWCOUNT INT
DECLARE @ERROR INT
DECLARE @LASTDT DATETIME
SET @LASTDT =GETDATE()
BEGIN TRAN
insert tables
select 4
SELECT @ROWCOUNT = @@ROWCOUNT, @ERROR = @@ERROR
IF (@ERROR <> 0)
BEGIN
INSERT CONTROL
SELECT 'ROWS NOT INSERTED', @ROWCOUNT
END
ELSE
BEGIN
INSERT CONTROL
SELECT 'ROWS INSERTED', @ROWCOUNT
END
COMMIT TRAN
IF (@ROWCOUNT > 0)
BEGIN
UPDATE DATETRACKING
SET LASTDATEDL = GETDATE()
END
http://www.sqlserverstudy.com
Hi All,
Can anyone please tell how to rollback a transaction or a command.
TIA
RKNAIR
Hi all
I have SQL server 2000 with SP4,
1.Some of the reason,I want roll back SP4 and I want replace SP3.
2.Is it true SP4 slow down the Quey performance compare with SP3.
any suggestion appreciated.