Hi
I need to write something in T-SQL which will return a record set from a table of IT hardware. The record set should comprise all items that are older than 3 years from the current date. Each hardware item has a purchase date against it so it should not be too difficult. I am considering the DATEDIFF function but I am not sure how best to write it.
Any suggestions ??
Thanks
I have 2 tables as follows:
table A-NewParts
PartNumber
Description
LaunchDate
a123
product a
4/1/2009
[code].....
I want to get end result as sales for each new product for a rolling period from Launch date as year1 sales,year2 sales...and so on which I got through case statements.I am stuck on how to get the total Sales for all products (including new products) in the same rolling period based on the different launch dates for each new product.
PartNumber
Description
LaunchDate
Yr1 Sales
Total Yr1 Sales
Yr2 Sales
Total Yr2 Sales
a123
[code].....
Does anyone have an example of an SQL query which returns rows for theyear-to-date, but where the "year" commences on August 1st?e.g. select * from mytable where datefield > last august 1stTIA for any helpIsabel
View 2 Replies View RelatedHi,
I'm writing a query that will be calculating a number of business performance measures including the following...
Average Stock:
This is calculated by taking the actual stock value of the product category per month and dividing it by 13 if we have over 12 month's history, or if a new product, then by the number of months we have had it in stock for.
Cost of Goods Sold Annualised:
This is an average figure for the year of the sold landed costs for the product category over a 13 month period if we have over 12 months history. If it's a new product, then it's for the number of months we have had stock.
My question is, how do I tell the query to go back 13 months from the current month?
Please refer to this table in this discussion:
Charges
Date
1
1/1/07
2
2/1/07
3
3/1/07
4
4/1/07
5
5/1/07
6
6/1/07
7
7/1/07
8
8/1/07
9
9/1/07
10
10/1/07
11
11/1/07
12
12/1/07
What i'm trying to do is return a result with total charges from 3 months previous based on a date parameter or just as a whole for that matter. For example:
If my date parameter is 6/14/07, i'd like my total charges to be 15 (6+5+4).
If my date parameter is 7/10/07, the charges would be 18 (7+6+5)
I hope that makes sense of where i'm going with this. I've played with this using the "Guru's Guide" solution by Ken Henderson, but still to no avail yet. Here's his code syntax:
Code Block
SELECT a.DayCount, a.Sales, SUM(b.Sales)
FROM Sales a CROSS JOIN Sales b
WHERE (b.DayCount <= a.DayCount) AS RunningTotal
GROUP BY a.DayCount,a.Sales
ORDER BY a.DayCount,a.Sales
Here is the result set i'm looking for:
Charges
Date
1
1/1/07
2
2/1/07
6
3/1/07
9
4/1/07
12
5/1/07
15
6/1/07
18
7/1/07
21
8/1/07
24
9/1/07
27
10/1/07
30
11/1/07
33
12/1/07
Each date's charges are a culmination of 3 months worth of charges.
Any help would be greatly appreciated. I'll be trying to figure this one out concurrently and if i do, i'll post back!
Thanks in advance!
I am using MS SQL 2012 and have a pretty simple table dbo. Migration Breakdown with sample data as follows.
DepartDateTime ZoneMovement
2015-06-26 14:00:00.000 6 to 4
2015-06-26 14:00:00.000 11 to 7
2015-06-26 15:30:00.000 9 to 6
2015-06-26 21:00:00.000 7 to 3
2015-06-27 08:01:00.000 7 to 4
[code]....
What I am trying to do is parse the data set to find out when we have more than three like movements ex. 3 to 10 within ANY rolling 72 hour period. I have looked at the SQL Window Functions OVER with a ROW | RANGE subclause, but I can't find out how to tackle this rolling 72 hour business.
I have the following script that calculates Sales by month and current year.
We run a Fiscal year from April 1st thru March 31st.
So April 2012 sales are considered Fiscal Year 2013.
Is there a way I can alter this script to get Fiscal Year Totals?
select ClassificationId, YEAR(inv_dt) as Year, cus_no,
isnull(sum(case when month(inv_dt) = 4 then salesamt end),0) as 'Apr',
isnull(sum(case when month(inv_dt) = 5 then salesamt end),0) as 'May',
isnull(sum(case when month(inv_dt) = 6 then salesamt end),0) as 'Jun',
isnull(sum(case when month(inv_dt) = 7 then salesamt end),0) as 'Jul',
[Code] ....
Data returned looks like the following.
ClassificationID Year Cus_no Apr May June ....
100 2012 100 $23 $30 $400
100 2013 100 $40 $45 $600
What I would need is anything greater than or equal to April to show in the next years row.
How to get current year from SQL query?
View 10 Replies View RelatedI'm trying to generate a report using matrix like this
Month
Product PreviousYearSalesAmount SelectedYearSalesAmount %SalesDifference
I can populate year sales amount, but i cant calculate the percentage.
Note: Month and Year are passed as parameters.
I have three web form controls, a ddl that contains the day, another ddl that contains the month and a textbox that contains the current year. To send the date chosen by the user to the database, I join the three web form control values so that the resultant string is ‘day/month/year’ thus:
CmdInsert.Parameters("@Date").Value = day.SelectedItem.Value + "/" + month.SelectedItem.Value + "/" + year.Text()
And the resultant string is: dd/mm/yyyy, for example 30/08/2004.
But the problem is if the user does not select any day or any day and month, then the resultant string is for example; 00/08/2004 or 00/00/2004, but the problem is the database does not accept this format as datetime. How can I do it?
I want the user has the possibility to chose as well only the month and year, and as well only the year. Is it possible to send to the database the datetime format with only the month and year, or only the year?
Thank you,
Cesar
I have two queries that give me the total sales amount for the current year, and the last year.
SELECT SUM([Sales (LCY)])
FROM [$Cust_ Ledger Entry] cle
LEFT OUTER JOIN dw.dim.FiscalDate fd
ON fd.CalendarDate = cle.[Posting Date]
WHERE [Customer No_] = '10135'
AND fd.CalendarYear = '2013'
[Code] ....
I would like to learn how to be able to make this a single query and end up with two columns and their summed up totals. Like it shows on the attached image.
This is my query without the columns I need:
SELECT
c.CustomerNumber
,c.Name
,c.ChainName
,c.PaymentTermsCode
,cle.CreditLimit AS 'CreditLimit'
,SUM(cle.Amount) AS 'Amount'
[Code] ....
I am writing a usage query, I need to determine what the current month and year is. If the current month is 1, then I need Year-1. I keep getting this error Line 5: Incorrect syntax near '='.
If I comment out the case statement just evaluate the (YEAR(User_Date) = YEAR(DATEADD(yy, - 1, GETDATE())))or (YEAR(User_Date) = YEAR(GETDATE())) by itself, the query works. What I am missing? Anybody?1 SELECT CONVERT(char(10), User_Date, 101) AS userdate, COUNT(*) AS CNT, User_Name2 FROM Users3 WHERE (User_Name = 'Joe Bob') AND (MONTH(User_Date) = MONTH(DATEADD(mm, - 1, GETDATE()))) AND 4 case MONTH(User_Date) when 1 then 5 (YEAR(User_Date) = YEAR(DATEADD(yy, - 1, GETDATE())))6 else (YEAR(User_Date) = YEAR(GETDATE()))7 END8 GROUP BY CONVERT(char(10), User_Date, 101), User_Name9 ORDER BY CONVERT(char(10), User_Date, 101), User_Name
I am using the query below and it is working great to give me montly averages. I need to find the fiscal year to date averages for the same data. I think all I should need to change is the Select and Group by sections but I am having no sucess.
SELECT Format([CallDate],"yyyy mmm") AS [Month], Count(DailyCallStats.CallDate) AS CountOfCallDate, DailyCallStats.Agent, Avg(DailyCallStats.Inbound) AS AvgOfInbound, Avg(DailyCallStats.Outbound) AS AvgOfOutbound, Avg(DailyCallStats.TotalCalls) AS AvgOfTotalCalls, Avg(DailyCallStats.AvgWrap) AS AvgOfAvgWrap, Avg(DailyCallStats.ParkTime) AS AvgOfParkTime
FROM DailyCallStats
GROUP BY Format([CallDate],"yyyy mmm"), DailyCallStats.Agent, Format([CallDate],"yyyy mm")
ORDER BY Format([CallDate],"yyyy mm");
I'm using PHP with SQLServer2k to create a page containing monthly counts of episodes at a facility occurring between two user selected month/year combinations. For instance, the user could select 10/2003 and 2/2004 and facility X and get a line for each month showing the count of episodes occuring in that month.
The problem is that the episode date is stored in three integer fields (epiday, epimonth, epiyear) and I'm having a terrible time getting them into a format where I can use them in a between statement.
I've tried evaluating the parts of the episode date seperately like:
where
(epimonth>=10 and epiyear=2003)
or
(epimonth<=2 and epiyear=2004)
and that works, but what happens when someone wants to see from 10/2002 to 2/2004?
Any suggestions on the best way to do this?
We have customers who are new to this year (2014) and there same customers in last year (2013). also there are customers we have not received business this year but only last year. so there are 4 conditions.
1) New customer (2014) - Customer(B)
2) Old Regular customer (2013 and 2014) - Customer(A)
3) Last Year (Lost) customer (2013) - Customer(C), no business received in year(2014)
For example we have a transaction table:
TransactionId, ReceivedDate, Customer
1, 2-Dec-2013, A
2, 3-Jan-2014, A
3, 2-Mar-2014, B
4, 25-Nov-2013, C
I want results like
Customer, Business (this year activity/last year activity)
A, 1/1
B, 1/0
C, 0/1
How can i show this for each year? I used to separate it month wise as below but it does not return applying year with each customer anyhow...
select t.customerId, YEAR(Receiveddate),
sum(case month(ReceivedDate) when 1 then 1 else 0 end )as Jan,
sum(case month(ReceivedDate) when 2 then 1 else 0 end )as Feb,
sum(case month(ReceivedDate) when 3 then 1 else 0 end )as Mar,
sum(case month(ReceivedDate) when 4 then 1 else 0 end )as Apr,
[Code] ....
HiI want to write a function that can return a sum for a given daterange. The same function should be able to return the sum for the sameperiod year before.Let me give an example:The Table LedgerTrans consist among other of the follwing fieldsAccountNum (Varchar)TransdateAmountMST (Real)The sample data could be1111, 01-01-2005, 100 USD1111, 18-01-2005, 125 USD1111, 15-03-2005, 50 USD1111,27-06-2005, 500 USD1111,02-01-2006, 250 USD1111,23-02-2006,12 USDIf the current day is 16. march 2006 I would like to have a functionwhich called twice could retrive the values.Previus period (for TransDate >= 01-01-2005 AND TransDate <=16-03-2005) = 275 USDCurrent period (for TransDate >= 01-01-2006 AND TransDate <=16-03-2006) = 262 USDThe function should be called with the AccountNum and current date(GetDate() ?) and f.ex. 0 or 1 for this year / previous year.How can I create a function that dynamically can do this ?I have tried f.ex. calling the function with@ThisYear as GetDate()SET @DateStart = datepart(d,0) + '-' + datepart(m,0) +'-'+datepart(y,@ThisYear)But the value for @dateStart is something like 12-07-1905 so thisdon't work.I Would appreciate any help on this.BR / Jan
View 3 Replies View RelatedI have a table of data that has a format similar to the following:
EventID | Event Date
--------------------
1 | 1/1/2014
2 | 2/8/2014
3 | 10/1/2014
4 | 2/5/2014
5 | 4/1/2014
6 | 9/1/2014
What I am trying to do is create a DAX formula to rank each event in the order that it happened for the year. So I want to end up with something like this. This way I can compare the events year over year as the events don't happen on any regular time schedule.
Event Date | Year | Rank
------------------------
1/1/2014 | 2014 | 1
2/8/2014 | 2014 | 2
10/1/2014 | 2014 | 3
2/5/2015 | 2015 | 1
4/1/2015 | 2015 | 2
9/1/2015 | 2015 | 3
I have tried to do this by creating a formula that will give me the day number of the year:
Day of Year =(YEARFRAC(CONCATENATE("Jan 1 ", YEAR([Event Date])),[Event Date])*360)+1
Then using rankX on this table, but I cant seem to get the proper result. Perhaps I am not understanding the use of rankX or going about this the right way.
=RANKX(FILTER(Event,EARLIER(Event[Event Year])=Event[Event Year]),Event[Day of Year])
or
=RANKX(All(Event[Event Year]),[Day of Year],,1,Dense)
Hello, I need to find the percentage of a a given contract start and end date for the year given.For example, the contract_start date is 05/08/2000 and the contract_end date is 04/30/2010, of course this will be 100% if you want to find the percentage for year 2008 but if you wanted to find the percentage for year 2010, then the percentage would be something like 42% (appr. 5 months) (b/c it would for year 2010, the contract would be from 01/01/2010 thru 04/30/2010)I need to find the percent from the beginning of the year, to the end.a few examples: start: 01/01/2007 end: 05/01/2007 if for year: 2007; this is 4 months @33.33% start: 05/01/ 2006 end: 06/01/2007 if for year: 2007, then 6 months @ 50% (01/01/2007 - 06/01/2007); but if it was for year 2006 then it would be 7 months @ 58% (05/01/2006 thru 12/31/2006) start: 01/01/2000 end: 03/01/2010 for year: 2008 then 12 months @ 100% Any help would be valued. Thank you!
View 4 Replies View RelatedI have to find the earliest date for any existing calendar year in a table...
For instance.....
ClientID Year
1 1/1/2000
1 2/1/2000
2 3/1/2000
2 4/1/2001
2 5/1/2001
The results I need are....
ClientID Year
1 1/1/2000
2 3/1/2000
2 4/1/2001
It is all contained in one table. I have got the earliest years by using the YEAR() function and grouping by it. The only problem is that I am having a problem joining the table back onto itself with the subselect because of it's an aggregate.
Here is the first join I have....
SELECT DT.ClientID, Year1 FROM
(
SELECT ClientID, YEAR(MyDate) as Year1
FROM MyTable
) AS DT
GROUP BY ClientID, Year1
ORDER BY ClientID, Year1
I want to use that as my derived table and then join back to it... but it's not working...
Hi,
I want to display records from Jun-2006 To Mar-2008.Month and Year are two different fields.I got the expected result using Union as follows.But i want it within one qury only.Is it possible? if yes please guide me.
(Select SUM(Amt),
R.Month AS Month ,R.Year AS Year FROM Receipt R
WHERE (R.Month >= 6 AND R.Year = 2006)
Group By R.Year , R.Month )
Union
(Select SUM(Amt),
R.Month AS Month ,R.Year AS Year FROM Receipt R
WHERE (R.Month <=3 AND R.Year = 2008)
Group By R.Year , R.Month )
I am in seach of a query where in I can provide month, year and client name and fetch last available comments from the table.
Client,Month,Year and Comments are columns in that table.
For Ex: If i pass client as A, month as 7 and year as 2015, I should get comments for client A, month July and year 2015 if available.
If data not available, it must go to June month and so on until it finds comments.Also when month is Jan, if query is going back, year also should get changed.
I'm developing a 2 year comparison rolling 12 month Sales report but am having problems with the query I'm using. Because I need to include every month (whether no sales or not) I have a calendar table named metaDates and each table gets outer joined as a result. (Forgive the long query) Please see below.
SELECT Customer.country, Order_Line_Invoice.prodcatid, MetaDates.[Month], MetaDates.[Year], isNull(SUM(Order_Line_Invoice.Sales),0) AS Sales , SUM(Order_Line_Invoice.Cost) AS Cost,
( isNull(SUM(Order_Line_Invoice.Sales),0) - isNull(SUM(Order_Line_Invoice.Cost),0) )AS GM,
'Current 12 Months' AS yearNum
FROM MetaDates
LEFT OUTER JOIN Order_Line_Invoice ON (MetaDates.Date = Order_Line_Invoice.InvoiceDate AND (Order_Line_Invoice.prodcatid IN (@GroupByFieldFilter)) )
LEFT OUTER JOIN Customer ON (Order_Line_Invoice.CustId = Customer.CustId and Customer.country IN (@country) )
LEFT OUTER JOIN Product ON (Order_Line_Invoice.ProdId = Product.ProdId)
WHERE (MetaDates.Date BETWEEN dateadd(m, datediff(m, 0, DATEADD(month,-11,@EndDate) ), 0) AND @EndDate)
GROUP BY MetaDates.[Year], MetaDates.[Month], Customer.country, Order_Line_Invoice.prodcatid
UNION
SELECT Customer.country, Order_Line_Invoice.prodcatid, MetaDates.[Month], MetaDates.[Year], isNull(SUM(Order_Line_Invoice.Sales),0) AS Sales , SUM(Order_Line_Invoice.Cost) AS Cost,
( isNull(SUM(Order_Line_Invoice.Sales),0) - isNull(SUM(Order_Line_Invoice.Cost),0) ) AS GM,
'Previous 12 Months' AS yearNum
FROM MetaDates
LEFT OUTER JOIN Order_Line_Invoice ON (MetaDates.Date = Order_Line_Invoice.InvoiceDate AND (Order_Line_Invoice.prodcatid IN (@GroupByFieldFilter)) )
LEFT OUTER JOIN Customer ON (Order_Line_Invoice.CustId = Customer.CustId and Customer.country IN (@country) )
LEFT OUTER JOIN Product ON (Order_Line_Invoice.ProdId = Product.ProdId)
WHERE (MetaDates.Date BETWEEN dateadd(m, datediff(m, 0, DATEADD(month,-23,@EndDate) ), 0) AND dateadd(m, datediff(m, 0, DATEADD(month,-11,@EndDate) ), -1))
GROUP BY MetaDates.[Year], MetaDates.[Month], Customer.country, Order_Line_Invoice.prodcatid
ORDER BY MetaDates.[Year], MetaDates.[Month]
That said the second outer join (Customer.country IN (@country)) never gets executed. It's really a simple concept. "Give me last 2 year sales by month (every previous and last month even if no sales) but only for the country the user is in"
Can someone help me out with this sql statement. Any help would be much appreciated.
I'm working with a table called SALFLDGAMS where it has two columns that I need to work with. One of the columns is Period which has years from 2000 to 2005 and the other column is called amount which has the balance for that year. Let me explain in a little more detail. There are account codes associated with the years as well so there will be many places where for example the year 2000 will show up with a given value. What I'm trying to do is to create a view which has a BeginBalance column which adds lets say all the values for 2000 and sticks them to 2001. So what I'm saying is all the values from the previous year I want them in the current year. All in one column. Thanks for the help guys.
View 8 Replies View RelatedI have one matrix that shows the CrashCount (measure) by month. Looks like this:
Jan Feb Mar Apr May Jun Jul Aug Sep Oct Dec
25 90 100 55 52 55 22 55 22 35 65
The user selects a Year as a parameter. I want to put another matrix in that displays the previous year, just as the first year is displayed. How do i edit the second matrix? Do i put the parameter as
=(Parameters!CrashStatisticalYear.Value)-1 or is there some other way this can be done. Without having the user put 2 years. I just want them to pick one. And the previous year shows up in the matrix below this one. Can anyone help me with this...what should i do?
Guys,
I wanted to find the ratio: (sales made for current year 2007 - sales made for previous year 2006)/sales made for previous year 2006.
so, the result should be something like this:
Year: Sales: %change in sales:
2005 100 10%
2006 200 20%
2007 300 30%
How do I write a query for this...??? so that i can plot this in a chart in SSRS.
somebody help me.
Hello,
I am creating a sales report that needs to display Sales statistics for a selected month grouped by Material. Also, it needs to display the same stats for the selected month of the previous year. Finally, it needs to display Year To Date Statistics for the current year and previous year up to and including the selected month.
Currently, I am using 3 queries to do this. The first one gets the statistics the current month grouped by material. The others sprocs get their corresponding information by me passing in the material number and the month and doing the appropriate sum. So, essentially, for a single line of the report, 3 queries are being done. The problem arises in that sometimes there may be as many as 300 materils displayed in a given month, which amounts to alot of db activity and a long delay loading the report.
Is there anyway to get this information in one swoop using some fancy aggregation?
Thanks,
Jake
Having two tables.
1. ID Year
----------
1 1990
2 1991
3 1992
2. Name Year
--------------
ABC 1
XYZ 2
123 3
By passing year as an argument, Want to retrieve all the Names that does not have records for that particular year.
For example, if pass 1990, then the result set should be 'XYZ' and '123'
Thanks in advance
This is what I have for a query but i would like to take the year off. is there a way i can just have the month and day without the year attached?
View 3 Replies View RelatedI have a data column named Date_In with format of 20-May-13. How can I filter the data to select based on year only. I used
Select
*
From apps.xdmc_852@erpprod
Where Year(Date_in) = 2014
This code is not working. I also need a way to automatically update to next week range. For example, last week I used where function like this
Where Date_in = to_date('01/12/2014','MM/DD/YYYY')
Is there a way it will automatically at the next 7 days to the code above when the date is available. This week I have to go back and changed the code in to this:
Where Date_in = to_date('01/19/2014','MM/DD/YYYY')
Hi,
I'm having problems creating a query that brings the results based on last 8 days on date column (column9) and diferrent year from the current one.
If I run the each filter,
Code SnippetYear(Column9) <> Year(GetDate())
and
Code Snippet
(Column9 >= DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 8), 0)) AND (Column9 < DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 7), 0))
it returns the right values.
So far I've got (it returns no results):
Code Snippet
SELECT Column1, Column2, Column3, Column4, Column5, Column6, Column7, Column8, Column9, Column10, Column11, Column12, Column13, Column14,
Column15, Column16, Column17, Column18, Column19, Column20, Column21, Column22, Column23, Column24, Column25, Column26, Column27,
Column28, Column29, Column30, Column31, Column32, Column33, Column34, Column35, Column36, Column37, Column38, Column39, Column40,
Column41, Column42, Column43, Column44, Column45, Column46, Column47, Column48, Column49, data_anulacao, data_instalacao
FROM Contratos01
WHERE Year(Column9) <> Year(GetDate()) AND (Column9 >= DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 8), 0)) AND (Column9 < DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 7), 0))
ORDER BY Column1
Please give me your input.
THX.
In the Reference_Master table I have Total count based on date for each RefCode. Can I get the total count of each RefCode by monthly wise for each year
Reference_Master
RefCode Date Count
100012/18/20074
100012/19/20078
100012/20/20074
100022/18/20073
100022/19/20072
100022/20/20076
[Code] ...
I need the result as below
Result
RefCodeMonth/YearTotalCount
10001FEB-200716
10002FEB-200711
10003Mar-20077
10004Mar-20073
10005Mar-20072
10001FEB-200816
10002FEB-200811
10003Mar-20087
10004Mar-20083
10005Mar-20082
Greetings All,
I have a SQL question that maybe someone out there can help me with. Our fiscal year starts on 01/27. I want to write a query that I can pass a date to and it will return the week number (DATEPART("ww", someDate)) of the year using the Fiscal Year Start Date as the base. Datepart works great except it figures the first day of the year as 1/1. Does anyone know how I can make it work with a first day of the year equal to the fiscal year date 01/27. Any help would be appreciated.
TIA,
~ck
Our business get orders through the week with the weekends (Fri & Sat) orders being higher than weekdays. Im wanting to graph this years data with last years and possible the years before but to compare days in such a way that the all the weekdays line up. so comparing 2015 week 1 with 2014 week 1 but with 03/01/2015 (Sat) lining up with 04/01/2014 (Sat) etc.
I'm looking for alternatives to adding or removing days from the dates to solve this issue, i have a date dimension table for the past 5 years that i can use to compare calendar week 201401 with calendar week 201501 but I am finding it a bit inflexable.