I am designing a report in which the edges of the tables should be curved. Is there any way to make the edge of the tables rounded? Could any one suggest for this. I am using MS Reporting service 2003
View 2 RepliesI can't print reports using Microsoft Edge from Windows 10 With IE 11 Works fine.I've tried regsvr32 with rsclientprint64.dll but it's not working.
View 8 Replies View RelatedI was using Windows 7 and had SSRS 2014 installed.Having set up the inbound rule on Windows Firewall (port 80), to allow SSRS through, I was able to browse to the Report Manager URL, by opening up Internet Explorer as 'Administrator'..
However, now that I have upgraded to Windows 10, I am unable to open the URL.In fact there is now way for me to open Edge as administrator and open my Report Manager URL.
When I try to open the Powerview report in the new Windows 10 Explorer (MS Edge), I am asked to install Silverlight.
When I try to install this, it says I already have it installed so I can’t proceed in opening the Powerview report.
Just upgraded to Windows 10. My SSRS reports, SharePoint 2013 integrated, still work but have no scroll bars. I can use the touchscreen to scroll left and right. Mouse wheel or any other attempts to scroll the report view don't work.
View 4 Replies View RelatedHi
I'm inserting a decimal value into my db but it keeps round it of to a single figure. Its the result of time between two times. ie between 1:00 and 2:30 equals 2.5. But it ends up as 2 in the db even though the db field is also decimal. I know by looking at the watch in the bugger that its actually a decimal value just prior to insertion which only leads me to suspect that sql server is doing the rounding of, maybe this is the default behaviour but i need it to store the values as decimal.
I am writing a simple shopping cart app and the price field is being rounded when inserted into the database.There is a textbox for the user to enter the price. A stored procedure is used to insert the line item info to the data base table. The field in the table is formatted as datatype decimal. Below is the stored procedure and the code that adds the value to the parameter. Any suggestions on where I am going wrong?<Code>CREATE PROCEDURE [sp_insert_CartDetail] ( @ReferenceNum [int], @Item [varchar](26), @Desc1 [varchar](27), @Desc2 [varchar](20), @Desc3 [varchar](30), @Desc4 [varchar](30), @Note [text], @Quantity [int], @DateOrdered [datetime], @SalesPrice [decimal], @DistCost [decimal], @SalesTaxable [smallint], @RequiredDate [datetime], @User1 [varchar](12), @User2 [varchar](12), @User3 [varchar](12), @User4 [varchar](12), @User5 [varchar](12), @User6 [varchar](12))
AS INSERT INTO [ToolCrib].[dbo].[CartDetail] ( [ReferenceNum], [Item], [Desc1], [Desc2], [Desc3], [Desc4], [Note], [Quantity], [DateOrdered], [SalesPrice], [DistCost], [SalesTaxable], [RequiredDate], [User1], [User2], [User3], [User4], [User5], [User6]) VALUES ( @ReferenceNum, @Item, @Desc1, @Desc2, @Desc3, @Desc4, @Note, @Quantity, @DateOrdered, @SalesPrice, @DistCost, @SalesTaxable, @RequiredDate, @User1, @User2, @User3, @User4, @User5, @User6)SqlCmdInsetCartDetail.Parameters("@SalesPrice").Value = CType(txtCost.Text, Decimal)
</code>
Hello!
I´m having some trouble with a database field that I had to redefine. At first, it was defined as an int, but I had to change it to decimal (5,2).
I have an application which is accessing my database. Problem now is that when if I enter a decimal value, say 3,12 into my field and then press save on my BindingNavigator, this value is instantly rounded to 3,00. I tried entering the value directly into my database, and that´s no problem. The rounding seems to happen on the update statement. I tried stepping through the code, and after this particular line, the value is rounded... Any help?
Me.OrdersTableAdapter.Update(Me.OrdersDataSet.Orders)
Regards
Daniel
I have this case statement below it is for an access fee. My problem that I am having is that now I am getting a number that is huge. Example, 8.2350000000. I need this to be rounded up and numbers srinked to 8.24, how can I add that in my case statement below? Please help if you can.
Thanks
CASE clm_att1
WHEN 'NG' THEN CASE clm_h30 WHEN 0 THEN cast(clm_sppo as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)
ELSE cast(clm_H30 as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)
END
WHEN 'NA' THEN '0.00'
WHEN 'AF' THEN CASE clm_h30 WHEN 0 THEN cast(clm_sppo as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)
ELSE cast(clm_H30 as decimal(12,2))*(cast(clio_fee04 as decimal (12,2))/100)*.65
END
ELSE Null
END AS AccessFeeFinal,
I came across the below scenario in SSIS where the values are not getting rounded off in SSIS as expected.
I am passing the value 23007.945 and using a derived column expression to round off the value Round(number,2).
Placed a data viewer to view the outcome after the derived column expression.Value after derived column expression seems to be 23007.94 but the same when passed in SQL select round(23007.945,2) gives us the value as 23007.95.
What could be causing this?
I have created the following user function :-
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER function [dbo].[GetBillPrice](@BillLineID int)
returns float
as
begin
DECLARE @BillPrice float
SET @BillPrice = (
SELECT ((CAST(T_BillValueAndTax.BillValueAndTaxBillValue as float))+(CAST(T_BillTax.BillTaxTax1Value as float)) +(CAST(T_BillTax.BillTaxTax2Value as float)))
FROM T_BillLine
INNER JOIN T_BillValueAndTax on T_BillValueAndTax.BillValueAndTaxID = T_BillLine.BillValueAndTaxID_Price
INNER JOIN T_BillTax on T_BillTax.BillTaxID = T_BillValueAndTax.BillTaxID_Bill
WHERE T_BillLine.BillLineID = @BillLineID)
return ABS(@BillPrice)
end
No matter how I try to return the @BillPrice value, the value is rounded to the nearest whole number. For instance if the value is calculated as 198.75 the value returned is 199.0
When I execute the function in Query Anlayser the correct value of 198.75 is returned.
Any help in solving this would be greatly appreciated.
I came across the below scenario in SSIS where the values are not getting rounded off in SSIS as expected.
I am passing the value 23007.945 and using a derived column expression to round off the value Round(number,2).
Placed a dataviewer to view the outcome after the derived column expression.Value after derived column expression seems to be 23007.94 but the same when passed in SQL select round(23007.945,2) gives us the value as 23007.95.
What could be causing this?
In My table formula(varchar) and value(Float) column.
Example
formula --> (A+B)/C
I am trying to create same expression with value But my below example showing value gets rounded if it is big.
I am trying to do,
Declare @a float = 123456.235
SELECT CONVERT( varchar , @a) Result=>123456
any way to keep same value as It is?
I'm new to my company, although not new to SQL 2005 and I found something interesting. I don't have an ERD yet, and so I was asking a co-worker what table some data was in, they told me a table that is NOT in SQL Server 2005's list of tables, views or synonyms.
I thought that was strange, and so I searched over and over again and still I couldn't find it. Then I did a select statement the table that Access thinks exists and SQL Server does not show and to my shock, the select statement pulled in data!
So how did this happen? How can I find the object in SSMS folder listing of tables/views or whatever and what am I overlooking?
Thanks,
Keith
We have 20 -30 normalized tables in our dartabase . Also we have 4tables where we store the calculated data fron those normalised tables.The Reason we have these 4 denormalised tables is when we try to dothe calcultion on the fly, our site becomes very slow. So We haveprecalculated and stored it in 4 tables.The Process we use to do the precalcultion, will get do thecalculation and and store it in a temp table. It will compare the thetemp with denormalised tables and insert new rows , delte the old oneans update if any changes.This process take about 20 mins - 60mins. Ittakes long time because in this process we first do the calculationregardless of changes and then do a compare to see what are changed andremove if any rows are deleted, and insert new rowsand update thechanges.Now we like to capture the rows/columns changed in the normalisedtables and do only those chages to the denormalised table , which weare hoping will reduce the processing time by atleast 50%WE have upgraded to SQL SERVER 2005.So We like to use the newtechnology for this process.I have to design the a model to capture the changes and updated onlythose changes.I have the list of normalised tables and te columns which will affectthe end results.I thought of using Triggers or OUTPUT clause to capture the changes.Please help me with the any ideas how to design the new process
View 3 Replies View RelatedI am using the following select statement to get the row count from SQL linked server table.
SELECT Count(*) FROM OPENQUERY (CMSPROD, 'Select * From MHDLIB.MHSERV0P')
MHDLIB is the library name in IBM DB2 database. The above query gives me only the row count of table MHSERV0P. However, I need to get the names, rowcounts, and sizes of all tables that exist in MHDLIB librray. Is it possible at all?
From Newbie to Newbie,
Add reference to:
'Microsoft ActiveX Data Objects 2.8 Library
'Microsoft ADO Ext.2.8 for DDL and Security
'Microsoft Jet and Replication Objects 2.6 Library
--------------------------------------------------------
Imports System.IO
Imports System.IO.File
Code Snippet
'BACKUP DATABASE
Public Shared Sub Restart()
End Sub
'You have to have a BackUps folder included into your release!
Private Sub BackUpDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BackUpDB.Click
Dim addtimestamp As String
Dim f As String
Dim z As String
Dim g As String
Dim Dialogbox1 As New Backupinfo
addtimestamp = Format(Now(), "_MMddyy_HHmm")
z = "C:Program FilesVSoftAppMissNewAppDB.mdb"
g = addtimestamp + ".mdb"
'Add timestamp and .mdb endging to NewAppDB
f = "C:Program FilesVSoftAppMissBackUpsNewAppDB" & g & ""
Try
File.Copy(z, f)
Catch ex As System.Exception
System.Windows.Forms.MessageBox.Show(ex.Message)
End Try
MsgBox("Backup completed succesfully.")
If Dialogbox1.ShowDialog = Windows.Forms.DialogResult.OK Then
End If
End Sub
Code Snippet
'RESTORE DATABASE
Private Sub RestoreDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
RestoreDB.Click
Dim Filename As String
Dim Restart1 As New RestoreRestart
Dim overwrite As Boolean
overwrite = True
Dim xi As String
With OpenFileDialog1
.Filter = "Database files (*.mdb)|*.mdb|" & "All files|*.*"
If .ShowDialog() = Windows.Forms.DialogResult.OK Then
Filename = .FileName
'Strips restored database from the timestamp
xi = "C:Program FilesVSoftAppMissNewAppDB.mdb"
File.Copy(Filename, xi, overwrite)
End If
End With
'Notify user
MsgBox("Data restored successfully")
Restart()
If Restart1.ShowDialog = Windows.Forms.DialogResult.OK Then
Application.Restart()
End If
End Sub
Code Snippet
'CREATE NEW DATABASE
Private Sub CreateNewDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
CreateNewDB.Click
Dim L As New DatabaseEraseWarning
Dim Cat As ADOX.Catalog
Cat = New ADOX.Catalog
Dim Restart2 As New NewDBRestart
If File.Exists("C:Program FilesVSoftAppMissNewAppDB.mdb") Then
If L.ShowDialog() = Windows.Forms.DialogResult.Cancel Then
Exit Sub
Else
File.Delete("C:Program FilesVSoftAppMissNewAppDB.mdb")
End If
End If
Cat.Create("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Program FilesVSoftAppMissNewAppDB.mdb;
Jet OLEDB:Engine Type=5")
Dim Cn As ADODB.Connection
'Dim Cat As ADOX.Catalog
Dim Tablename As ADOX.Table
'Taylor these according to your need - add so many column as you need.
Dim col As ADOX.Column = New ADOX.Column
Dim col1 As ADOX.Column = New ADOX.Column
Dim col2 As ADOX.Column = New ADOX.Column
Dim col3 As ADOX.Column = New ADOX.Column
Dim col4 As ADOX.Column = New ADOX.Column
Dim col5 As ADOX.Column = New ADOX.Column
Dim col6 As ADOX.Column = New ADOX.Column
Dim col7 As ADOX.Column = New ADOX.Column
Dim col8 As ADOX.Column = New ADOX.Column
Cn = New ADODB.Connection
Cat = New ADOX.Catalog
Tablename = New ADOX.Table
'Open the connection
Cn.Open("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Program FilesVSoftAppMissNewAppDB.mdb;Jet
OLEDB:Engine Type=5")
'Open the Catalog
Cat.ActiveConnection = Cn
'Create the table (you can name it anyway you want)
Tablename.Name = "Table1"
'Taylor according to your need - add so many column as you need. Watch for the DataType!
col.Name = "ID"
col.Type = ADOX.DataTypeEnum.adInteger
col1.Name = "MA"
col1.Type = ADOX.DataTypeEnum.adInteger
col1.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col2.Name = "FName"
col2.Type = ADOX.DataTypeEnum.adVarWChar
col2.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col3.Name = "LName"
col3.Type = ADOX.DataTypeEnum.adVarWChar
col3.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col4.Name = "DOB"
col4.Type = ADOX.DataTypeEnum.adDate
col4.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col5.Name = "Gender"
col5.Type = ADOX.DataTypeEnum.adVarWChar
col5.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col6.Name = "Phone1"
col6.Type = ADOX.DataTypeEnum.adVarWChar
col6.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col7.Name = "Phone2"
col7.Type = ADOX.DataTypeEnum.adVarWChar
col7.Attributes = ADOX.ColumnAttributesEnum.adColNullable
col8.Name = "Notes"
col8.Type = ADOX.DataTypeEnum.adVarWChar
col8.Attributes = ADOX.ColumnAttributesEnum.adColNullable
Tablename.Keys.Append("PrimaryKey", ADOX.KeyTypeEnum.adKeyPrimary, "ID")
'You have to append all your columns you have created above
Tablename.Columns.Append(col)
Tablename.Columns.Append(col1)
Tablename.Columns.Append(col2)
Tablename.Columns.Append(col3)
Tablename.Columns.Append(col4)
Tablename.Columns.Append(col5)
Tablename.Columns.Append(col6)
Tablename.Columns.Append(col7)
Tablename.Columns.Append(col8)
'Append the newly created table to the Tables Collection
Cat.Tables.Append(Tablename)
'User notification )
MsgBox("A new empty database was created successfully")
'clean up objects
Tablename = Nothing
Cat = Nothing
Cn.Close()
Cn = Nothing
'Restart application
If Restart2.ShowDialog() = Windows.Forms.DialogResult.OK Then
Application.Restart()
End If
End Sub
Code Snippet
'COMPACT DATABASE
Private Sub CompactDB_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles
CompactDB.Click
Dim JRO As JRO.JetEngine
JRO = New JRO.JetEngine
'The first source is the original, the second is the compacted database under an other name.
JRO.CompactDatabase("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Program
FilesVSoftAppMissNewAppDB.mdb; Jet OLEDB:Engine Type=5", "Provider=Microsoft.Jet.OLEDB.4.0;
Data Source=C:Program FilesVSoftAppMissNewAppDBComp.mdb; JetOLEDB:Engine Type=5")
'Original (not compacted database is deleted)
File.Delete("C:Program FilesVSoftAppMissNewAppDB.mdb")
'Compacted database is renamed to the original databas's neme.
Rename("C:Program FilesVSoftAppMissNewAppDBComp.mdb", "C:Program FilesVSoftAppMissNewAppDB.mdb")
'User notification
MsgBox("The database was compacted successfully")
End Sub
End Class
I'm working on an ASP.Net project where I want to test code on a localmachine using a local database as a back-end, and then export it tothe production machine where it uses the hosting provider's SQL Serverdatabase on the back-end. Is there a way to export tables from oneSQL Server database to another in such a way that if a table alreadyexists in the destination database, it will be updated to reflect thechanges to the local table, without existing data in the destinationtable being lost? e.g. suppose I change some tables in my localdatabase by adding new fields. Can I "export" these changes to thedestination database so that the new fields will be added to thedestination tables (and filled in with default values), without losingdata in the destination tables?If I run the DTS Import/Export Wizard that comes with SQL Server andchoose "Copy table(s) and view(s) from the source database" and choosethe tables I want to copy, there is apparently no option *not* to copythe data, and since I don't want to copy the data, that choice doesn'twork. If instead of "Copy table(s) and view(s) from the sourcedatabase", I choose "Copy objects and data between SQL Serverdatabases", then on the following options I can uncheck the "CopyData" box to prevent data being copied. But for the "CreateDestination Objects" choices, I have to uncheck "Drop destinationobjects first" since I don't want to lose the existing data. But whenI uncheck that and try to do the copy, I get collisions between theproperties of the local table and the existing destination table,e.g.:"Table 'wbuser' already has a primary key defined on it."Is there no way to do what I want using the DTS Import/Export Wizard?Can it be done some other way?-Bennett
View 3 Replies View RelatedI have a trade data tables (about 10) and I need to retrieve information based on input parameters. Each table has about 3-4 million rows.
The table has columns like Commodity, Unit, Quantity, Value, Month, Country
A typical query I use to select data is "Select top 10 commodity , sum(value), sum(quantity) , column4, column5, column6 from table where month=xx and country=xxxx"
The column4 = (column2)/(total sum of value) and column 5=(column3)/(total sum of quantity). Column6=column5/column4.
It takes about 3-4 minutes for the query to complete and its a lot of time specially since I need to pull this information from a webpage.
I wanted to know if there is an alternate way to pull the data from server ?
I mean can I write a script that creates tables for all the input combinations i.e month x country (12x228) and save them in table (subtable-table) with a naming convention so from the web I can just pull the table with input parameters mapped to name convention and not running any runtime queries on database ??
OR
Can I write a script that creates a html files for each table for all input combinations save them ?
OR
Is there exists any other solution ?
Hi all,
I have a large Excel file with one large table which contains data, i've built a SQL Server DataBase and i want to fill it with the data from the excel file.
How can it be done?
Thanks, Michael.
Hi,
Currently, I'm using the following steps to migrate millions of records from Foxpro tables to SQL Server tables:
1. Transfer Foxpro records to .dat files and then bcp to SQL Server tables in a dummy database. All the SQL tables have the same columns as the Foxpro tables.
2. Manipulate the data in the SQL tables of the dummy database and save the manipulated data into the SQL tables of the real database where the tables may have different structure from the corresponding Foxpro tables.
I only know the following ways to import Foxpro data into SQL Server:
#1. Transfer Foxpro records to .dat files and then bcp to SQL Server tables
#2. Transfer Foxpro records to .dat files and then Bulk Insert to SQL Server tables
#3. DTS Foxpro records directly to SQL Server tables
I'm thinking whether the following choices will be better than the current way:
1st choice: Change step 1 to use #2 instead of #1
2nd choice: Change step 1 to use #3 instead of #1
3rd choice: Use #3 plus manipulating in DTS to replace step 1 and step 2
Thank you for any suggestion.
I have 3 Checkbox list panels that query the DB for the items. Panel nº 2 and 3 need to know selection on panel nº 1. Panels have multiple item selection. Multiple users may use this at the same time and I wanted to have a full separation between the application and the DB. The ASP.net application always uses Stored Procedures to access the DB. Whats the best course of action? Using a permanent 'temp' table on the SQL server? Accomplish everything on the client side?
[Web application being built on ASP.net 3.5 (IIS7) connected to SQL Server 2005)
Firstly I consider myself quite an experienced SQL Server user, andamnow using SQL Server 2005 Express for the main backend of mysoftware.My problem is thus: The boss needs to run reports; I have designedthese reports as SQL procedures, to be executed through an ASPapplication. Basic, and even medium sized (10,000+ records) reportingrun at an acceptable speed, but for anything larger, IIS timeouts andquery timeouts often cause problems.I subsequently came up with the idea that I could reduce processingtimes by up to two-thirds by writing information from eachcalculationstage to a number of tables as the reporting procedure runs..ie. stage 1, write to table xxx1,stage 2 reads table xxx1 and writes to table xxx2,stage 3 reads table xxx2 and writes to table xxx3,etc, etc, etcprocedure read final table, and outputs information.This works wonderfully, EXCEPT that two people can't run the samereport at the same time, because as one procedure creates and writesto table xxx2, the other procedure tries to drop the table, or read atable that has already been dropped....Does anyone have any suggestions about how to get around thisproblem?I have thought about generating the table names dynamically using'sp_execute', but the statement I need to run is far too long(apparently there is a maximum length you can pass to it), and evenbreaking it down into sub-procedures is soooooooooooooooo timeconsuming and inefficient having to format statements as strings(replacing quotes and so on)How can I use multiple tables, or indeed process HUGE procedures,withdynamic table names, or temporary tables?All answers/suggestions/questions gratefully received.Thanks
View 2 Replies View RelatedDoes anyone have a script that can drop the Identity columns from all the tables in a database? Thanks
View 1 Replies View RelatedHello all,
Being still a relative newcomer to SQL Server (people may say I'm trying to take on too much being somewhat inexperienced once they read about the problem I'm trying to tackle, but alas...) I'm running into the following problem: I need to create tables in my user database on the fly (using Stored Procedures) so that each table can be created many times in the database but only once for every user. The tables should be named something like "username.Table1", "username.Table2" etc. as opposed to "dbo.Table1". I then want to use the stored procedure from .NET/C# in my web application, so that i can create the complete set of usertables for each of my clients.
Now, I tackled the stored procedure part (that is, it creates all the tables I need with all the parameters I want) and am able to use it from my web application (which took some time to learn but proved quite easy to do), but I cannot seem to get it coupled to the current user (instead of the dbo). Every time I trie, the tables are created as dbo.Table1 and when I try to create a new set, it gives a warning ("table with name such and so already exists..."). I made sure to log in as an authenticated user (using forms authentication) before trying to create the tables but this gives the aforementioned result.
What am I doing wrong? I use Visual Web Developer Express, SQL Server 2005 Express and IIS version 5.1
Please help :-D
Greetingz,
DJ Roelfsema
hi. I am very new to databases.
At the moment I have one big database that has column titles such as author, book title, rating, isbn, publisher, publish date, copyright date, graphical image review, availability, genre.
I want to break this large table down into say four smaller relational tables. Partly because it is so large and partly to make it easier to bind the data to the web site. I also want to keep the large table.
How can i do this? I use sql server management express. The database is on my hosts database. I also use VWD 2005 express edition.
thanks for your time
nick
Ok say I would like to build a table for of the following questions(say 6 questions for the sake of argument):
Do I just stored the index of the radiobuttonlist. What are some resources that I could look at. Should I make a look up table.
5) If money were no object, I would live . . .
Prefer not to say
On a tropical island
In a New York penthouse
In an English castle
On a Texas ranch
In a Malibu beach house
In a mountain retreat (Selected)
On the moon
None of the above
1 --->
2 --->
3 --->
4 --->
5) --->6 This is the question we are looking at.
6 --->
How should I create the database table for the above example.
I have created 3 views, which I then want to join to produce an overall result. The first view returns customer details, along with payment information. The next two views return values only when the customer has purchased extras outside our standard product i.e. if there is no purchase of an extra, then nothing is written to the extra's table. When I join the views together they only return values where data has been matched in all 3 views i.e. extra's have been purchased. Any data that did not match in all 3 view (i.e. no extra's purchased) is either ignored or dropped from the results. So I need my script to return all values even if no data exists in the two extra views.
My scripts are as follows:
Main View
SELECT
CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID,
CUSTOMER_POLICY_DETAILS.HISTORY_ID,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONUSER,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE,
ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID,
CUSTOMER_INSURED_PARTY.SURNAME,
SYSTEM_INSURER.INSURER_DEBUG,
SYSTEM_SCHEME_NAME.SCHEMENAME,
CUSTOMER_POLICY_DETAILS.POLICYNUMBER,
--TotalPayable
IsNull(SUM(CASE LIST_TRAN_BREAKDOWN_TYPE.IncludeInTotal
WHEN 1 THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS TotalPayable,
--NetPremium
IsNull(SUM(CASE ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID
WHEN 'NET' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS NetPremium,
--IPT
IsNull(SUM(CASE
WHEN SubString(ACCOUNTS_TRAN_BREAKDOWN.Premium_Section_ID, 1, 3) = 'TAX' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS IPT,
--Fee
IsNull(SUM(CASE ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID
WHEN 'FEE' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS Fee,
--TotalCommission
IsNull(SUM(CASE
WHEN SubString(ACCOUNTS_TRAN_BREAKDOWN.Tran_Breakdown_Type_ID, 4, 4) = 'COMM' THEN ACCOUNTS_TRAN_BREAKDOWN.AMOUNT
ELSE 0
END), 0) AS TotalCommission
FROM
ACCOUNTS_CLIENT_TRAN_LINK
INNER JOIN ACCOUNTS_TRANSACTION
ON ACCOUNTS_CLIENT_TRAN_LINK.TRANSACTION_ID = ACCOUNTS_TRANSACTION.TRANSACTION_ID
INNER JOIN ACCOUNTS_TRAN_BREAKDOWN
ON ACCOUNTS_TRANSACTION.TRANSACTION_ID = ACCOUNTS_TRAN_BREAKDOWN.TRANSACTION_ID
INNER JOIN LIST_TRAN_BREAKDOWN_TYPE
ON ACCOUNTS_TRAN_BREAKDOWN.TRAN_BREAKDOWN_TYPE_ID = LIST_TRAN_BREAKDOWN_TYPE.TRAN_BREAKDOWN_TYPE_ID
INNER JOIN CUSTOMER_POLICY_DETAILS
ON CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID = ACCOUNTS_CLIENT_TRAN_LINK.POLICY_DETAILS_ID AND
CUSTOMER_POLICY_DETAILS.HISTORY_ID = ACCOUNTS_CLIENT_TRAN_LINK.POLICY_DETAILS_HISTORY_ID
INNER JOIN SYSTEM_INSURER
ON CUSTOMER_POLICY_DETAILS.INSURER_ID = SYSTEM_INSURER.INSURER_ID
INNER JOIN SYSTEM_SCHEME_NAME
ON CUSTOMER_POLICY_DETAILS.SCHEMETABLE_ID = SYSTEM_SCHEME_NAME.SCHEMETABLE_ID
INNER JOIN CUSTOMER_INSURED_PARTY
ON ACCOUNTS_CLIENT_TRAN_LINK.INSURED_PARTY_HISTORY_ID = CUSTOMER_INSURED_PARTY.HISTORY_ID AND
ACCOUNTS_CLIENT_TRAN_LINK.INSURED_PARTY_ID = CUSTOMER_INSURED_PARTY.INSURED_PARTY_ID
WHERE
CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE = '2007-08-17' AND
ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID <> 'PAY'
GROUP BY
CUSTOMER_POLICY_DETAILS.POLICY_DETAILS_ID,
CUSTOMER_POLICY_DETAILS.HISTORY_ID,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONUSER,
CUSTOMER_POLICY_DETAILS.AUTHORISATIONDATE,
ACCOUNTS_TRANSACTION.TRANSACTION_CODE_ID,
CUSTOMER_INSURED_PARTY.SURNAME,
SYSTEM_INSURER.INSURER_DEBUG,
SYSTEM_SCHEME_NAME.SCHEMENAME,
ACCOUNTS_TRANSACTION.Transaction_ID,
CUSTOMER_POLICY_DETAILS.POLICYNUMBER
Add on View 1
CREATE VIEW TOPCARDPA AS
select policy_details_id, History_id, Selected from customer_addon where product_addon_id = 'TRPCAE01'
Add on View 2
CREATE VIEW TOPCARDRESC AS
select policy_details_id, History_id, Selected from customer_addon where product_addon_id = 'HICRESC01'
Join Result Script
SELECT
TOPCARD.AUTHORISATIONUSER,
TOPCARD.AUTHORISATIONDATE,
TOPCARD.TRANSACTION_CODE_ID,
TOPCARD.SURNAME,
TOPCARD.INSURER_DEBUG,
TOPCARD.SCHEMENAME,
TOPCARD.POLICYNUMBER,
TOPCARD.TotalPayable,
TOPCARD.NetPremium,
TOPCARD.IPT,
TOPCARD.Fee,
TOPCARD.TotalCommission,
TOPCARDPA.SELECTED,
TOPCARDRESC.SELECTED
FROM
dbo.TOPCARD TOPCARD
INNER JOIN dbo.TOPCARDPA TOPCARDPA
ON TOPCARD.POLICY_DETAILS_ID = TOPCARDPA.POLICY_DETAILS_ID AND
TOPCARD.HISTORY_ID = TOPCARDPA.HISTORY_ID
INNER JOIN dbo.TOPCARDRESC TOPCARDRESC
ON TOPCARD.POLICY_DETAILS_ID = TOPCARDRESC.POLICY_DETAILS_ID
AND
TOPCARD.HISTORY_ID = TOPCARDRESC.HISTORY_ID
I have included all the scripts I have used, as others may find them useful, in addition to anyone that is able to provide me with some assistance. Thanks in advance for for the help.
I have facing a design problem and unable to justify which design to choose for my data model.
Usually, what we have is like data tables and reference tables to store data in those data tables.
My database has tables with 20-30 columns in them. And most of them (though not all of them), stores data from some reference tables. Meaning each column has an associated reference table where it stores possible list of values for that particular column. Sort of data domain for that column. FYI, My database is related to medical field.
For example, A table that has a varchar(40) column called "Differentiation". It can only store values from following list:
- Undifferentiated
- Moderate
- Poor
- Poor - Moderate
- Moderate - well
Now, to implement this, simple solution would be to have a reference table where I can store all these possible values...And then have just a reference of each data item into my "Differentiation" column in the table.
This is simplest and probably the best solution for such thing and i can also have referential integrity implemented for this.
But now if we look at the bigger picture, my database is growing and I have about 80 tables which I need to create where most of the columns will have different reference tables like I mentioned above. Approximate number of reference tables is 300 tables. All the reference table will have same structure, with different values for different columns.
Now, what seems to me is, because the table structure is same for every column, rather than having 300 different tables, I can only have 2 tables, where I can put all these reference values into these 2 tables.
Like,
Table 1 :
This table can have name of the reference table like "differentiationlist" etc.
Table 2:
It has reference to the reference table list in Table 1 discussed above and all the values that are part of that reference table can go in this table with its reference.
But problem with this is, because all the reference tables are in these two tables, I don't know how to implement referential integrity in this design.
Does anyone have any idea or solution for situation like this?
Thanks,
Ujjaval
I have a table that I am basically reduplicating a couple of times for each part of this database that I want to create.Each table basically has the same data: The tables will be called motherTable, fatherTable, sonTable, daughterTable and so on.I am pretty much using the following in each column: UserID, MotherID(or FatherID or SonID, etc., etc. and so on for each unique table), FirstName, LastName, MiddleName, BirthPlace, Photo, Age.I don't see an option to copy a table and just modify the second ID part and rename that table accordingly.How can I make this an easier way of creating these similar tables without retyping all these columns over and over again?Thanks in advance.
View 4 Replies View RelatedI need to copy data from warehouse tables to master tables of different SQL instances. Refresh need to done once in an hour. What is the best way to do this? SQL agent jobs or SSIS packages?
View 3 Replies View RelatedHi! I have a general SQL CE v3.5 design question related to table/file layout. I have an system that has multiple tables that fall into categories of data access. The 3 categories of data access are:
1 is for configuration-related data. There is one application that will read/write to the data, and a second application that will read the data on startup.
1 is for high-performance temporal storage of data. The data objects are all the same type, but they are our own custom object and not just simple types.
1 is for logging where the data will be permanent - unless the configured size/recycling settings cause a resize or cleanup. There will be one application writing alot [potentially] of data depending on log settings, and another application searching/reading sections of data.
When working with data and designing the layout, I like to approach things from a data-centric mindset, because this seems to result in a better performing system. That said, I am thinking about using 3 individual SDF files for the above data access scenarios - as opposed to a single SDF with multiple tables. I'm thinking this would provide better performance in SQL CE because the query engine will not have alot of different types of queries going against the same database file. For instance, the temporal storage is basically reading/writing/deleting various amounts of data. And, this is different from the logging, where the log can grow pretty large - definitely bigger than the default 128 MB. So, it seems logical to manage them separately.
I would greatly appreciate any suggestions from the SQL CE experts with regard to my approach. If there are any tips/tricks with respect to different data access scenarios - taking into account performance, type of data access, etc. - I would love to take a look at that.
Thanks in advance for any help/suggestions,
Bob
Has anyone seen this error? It comes up when my app executes a select statement via linked server (from MSSQL 2000 to 2005) the second time it runs. It's basically a timed poll of tables in the remote database. It works once but the second time it executes I get the error from the remote db, it's just a select but I guess the cursor is still open so it can't run again. After the exception the select will run again, once and it just repeats. I have researched it a little and it looks like it mostly has to do with the isolation level of the transaction. Unfortunately based on the componet being used to access the database I don't beleive I have the ability to use transact SQL to call the isolation level (s) listed.
Here's the weird part though, at another site the same scenario is running fine. Same primary and remote db versions of MSSQL as well as the application and it runs fine. I guess my question is what type of setup parameters that may be defined in MSSQL 2005 for the remote database might make it behave in this manner in one instance and not the other? TIA in advance for any thoughts/assistance.
DT