Rounding Problem In Total
Jan 23, 2007
In a cell I have the following:
=iif(Parameters!VOLREV.Value="Volume",sum(math.Round(Fields!ADMINSRV_SLS.Value)),sum(math.Round(Fields!ADMINSRV_FEES.Value)))
Depending on parameter I am either rounding the sum of sales or the sum of fees. This works beautifully. Problem is when I copy this to the total row it is not the total of the column. They are slightly off. I even tried naming the cell and then creating a calculated field in the total line to make sure that I am adding the values of that cell. =sum(ReportItems!MyNamedCell.value) But this crashes VS everytime and it has to restart. Does anyone have a suggestion please.
View 4 Replies
ADVERTISEMENT
Jun 9, 2004
Does anyone know how I can determine the number of page writes that have been performed during a set period of time? I need to figure out the data churn in that time period.
TIA
View 5 Replies
View Related
Feb 26, 2014
Very new to SQL and trying to get this query to run. I need to sum the total trips and total values as separate columns by day to insert them into another table.....
My code is as follows;
Insert Into [dbo].[CombinedTripTotalsDaily]
(
Year,
Month,
Week,
DayNo,
Day,
Trip_Date,
[Code] .....
View 3 Replies
View Related
Jul 20, 2005
I haven't a clue how to accomplish this.All the data is in one table. The data is stored by registration dateand includes county and number of students brokne out by grade.Any help appreciated!Rob
View 4 Replies
View Related
Oct 26, 2015
For some reason my Add Total is grey out, when i tried to add grand total using some expression.
I have two row & two column groups?
Is there any alternative or how can i enable add total? using expression..as you can see in my Attached Image
I'm using iff condition in my expression..Â
View 15 Replies
View Related
Jun 28, 2015
I have a table that writes daily sales each night but it adds the day's sales to the cumulative total for the month. I need to pull the difference of todays cumulative total less yesterdays. So when my total for today is 30,000 and yesterday's is 28,800, my sales for today would be 1,200. I want to write this to a new field but I just can't seen to get the net sales for the day. Here is some sample data. For daily sales for 6-24 I want to see 2,000, for 6-25 3,000, 6-26 3,500, and 6-27 3,500. I'm thinking a case when but can't seem to get it right.
CREATE TABLE sales
(date_created date,
sales decimal (19,2))
INSERT INTO sales (date_created, sales)
VALUES ('6-23-15', '20000.00'),
('6-24-15', '22000.00'),
('6-25-15', '25000.00'),
('6-26-15', '28500.00'),
('6-27-15', '32000.00')
View 9 Replies
View Related
Jul 26, 2013
My table contains 1000 records,
I need to know the total record count with the below paging query
SELECT EmpName,Place
FROM EmplyeeDetails ORDER BY Place
OFFSET 10 ROWS FETCH NEXT 10 ROWS ONLY;
How to get?
View 2 Replies
View Related
Apr 28, 2006
Hi, can anyone help?
I have created a Report using Visual studio-the report displays a subreport within it.
On the Subjective Report I have 12 values for each month of the year.
For the first month the value is =sum(Fields! Month_1.Value), and I
have named this text box €™SubRepM1€™
The name of the subreport is €˜subreport1'.
On my Main Report, again I have 12 values for each month of the year.
For the first month the value is =sum(Fields! Month_1.Value)*-1, and I
have named this text box 'MainRepM1'
The name of the main report is 'GMSHA Budget Adjustment Differentials'
The report displays both of the subreport and main report values
but I now need to total these values together for each month in order to
produce a grand total.
I have tried using the following to add the totals for Month 1 together,
=subreport1.Report.SubRepM1 + MainRepM1
but this does not work and I get the following error message €˜The value expression for the text box 'textbox18'contains an error [BC30451] Name subreport1 is not declared'.
I feel that it should be a simple matter of adding the two sets of values together but I€™m having major problems trying to get these totals to work.
Can anyone help, thanks
View 7 Replies
View Related
Jul 20, 2005
Anyone has a "one sql statement" to get the total spaceused and totalspace allocated of an instance ? ie same as sum of relevance fieldsfrom sp_spaceused for each database in an instance, that works accrossversion of mssql from 6 onward.ThanksKD
View 1 Replies
View Related
Aug 10, 2006
Hi all,
I have a table named Prescription that consists of attributes like PatientId, MedicineCode, MedicineName, Prices of different drugs, quantity of different drugs(e.g 1,2,3,10), date .
I would like to get a summary of the total number and amount of different drugs in a specific period, the total amount of each type of drug.
I kindly request for help.
Thanx in advance.
Ronnie
View 4 Replies
View Related
Jul 9, 2005
I have the following code that retreives the current value of the item price. however it always rounds up. If I manually enter a return value like so:return (decimal)12.47 It returns the correct value, however if I set it with an expression like this:return (decimal)arParam[1].Value;It rounds the number up: How can I get it to not round up when insertign a value based ona expression?
public decimal GetCreditPrice(string CustomerSecurityKey)
{
try
{
System.Data.SqlClient.SqlParameter prmCrnt;
System.Data.SqlClient.SqlParameter[] arParam = new System.Data.SqlClient.SqlParameter[2];
prmCrnt = new System.Data.SqlClient.SqlParameter("@CustomerSecurityKey", SqlDbType.VarChar,25);
prmCrnt.Value = CustomerSecurityKey;
arParam[0] = prmCrnt;
prmCrnt = new System.Data.SqlClient.SqlParameter("@Price", SqlDbType.Decimal);
prmCrnt.Direction = ParameterDirection.Output;
arParam[1] = prmCrnt;
SqlHelper.ExecuteNonQuery(stConnection, CommandType.StoredProcedure, "GetCreditPrice", arParam);
return (decimal)arParam[1].Value;
}
catch(System.Exception ex)
{
throw ex;
}
}
View 1 Replies
View Related
Jun 2, 2008
I have the following statement and I want to round the final value(gbkmut.bdr_hfl)two decimal places.
begin
UPDATE gbkmut
SET gbkmut.bdr_hfl = gbkmut.bdr_hfl - (SELECT SUM(inserted.bdr_hfl) FROM inserted WHERE inserted.freefield3 = 'Rebate')
WHERE reknr = ' 1040'
end
View 5 Replies
View Related
Feb 4, 2008
all,
i want to round a number, for example 8.50 be 9
i use math.round
it works when it's like math.Round(8.50)
the result would be 9
but if i do this math.Round(max(Fields)) or max(math.Round(Fields))
> assume the Fields value's 8.50, the result is 8
anybody know how to solve this?
thanks!
Addin
View 7 Replies
View Related
Sep 22, 2004
I'm passing a value from an ASP.net app to an sql stored procedure which stores it in a table.
Problem is if, for example, the value is 2.81 the value is ending up as 2.08999... in my table, but if i do say 6.3 it's fine.
Ive tried having the variable in asp and the field where its stored in sql as a number of types but all with the same result.
Any ideas?
Geoff.
View 1 Replies
View Related
Jun 6, 2000
Looking for a way to round numbers to a specified number of significant digits. The ROUND function rounds to a specific decimal place but does not take into account the level of significance of the remaining numbers. (i.e.
ROUND(7.12435,2)=7.12000) The type of function I need would round the number in the following manner: SigFigRound(7.12435,3)=7.12 or
SigFigRound(7.12345,1)=7.
Any solutions?
View 1 Replies
View Related
Jul 23, 2004
I have rounding problems when editing or inserting a new record in float type fields.
e.g. I have a cursor running an agrregate SQL statement. I have a calculated field Sum(DFactor*Cost). DFactor gets values -1,1 and values of Cost in the table have 2 digits. I get these values in a variable e.g. @FCost. Then I round @FCost=Round(@FCost,2).
When I try to inert this value to a new record again I'using Round(@FCost,2).
However in a lot of records a lot of digits are stored.
I have the same probelm when trying to insert values from MSAccess by ODBC. Although I'm using CLng(@FCost*100)/100 in order to have 2 digits, a lot of demical values are created.
What is the best practise in order to solve this problem?
Regards,
Manolis
View 2 Replies
View Related
Feb 20, 2004
I have just converted some Access VBA code to a sproc. I'm finding that for some reason the rounding is different:
eg.
ROUND(17 * 97995 / 1000,2) = 1665.915 before Rounding
SQL SProc: 1665.91 Rounds down
ADP VBA: 1665.92 Rounds up
Does this make sense?
View 11 Replies
View Related
Jun 11, 2008
I need to add 3% to my prices
UPDATE prices SET price = price * 1.03
But I also need to round up to the nearest 99p so for example 1.13 becomes 1.99
How can I do this, I presume I need to round up to the nearest whole number, i.e. Math.Ceiling and then -0.01 but I dont know the syntax in SQL.
Thank you
View 2 Replies
View Related
Sep 27, 2006
I need help on this query. I'm trying to have a number rounded, so I can truncate the decimal. The reason I want to do this is that it is for a planning function and I need it to round to a number that is divisible by an order minimum qty. Example: I show a need for 2611 items, but the item is only ordered in qtys of 100, so I'd need 2600 instead of 2611, because the vendor won't let me order out of qty. So, my query would take 2611 / minimum order qty (100) which would be 26.11 somehow take off the .11 then multiply back by 100, which would give me 2600.
use mas500test_app
-- UPDATE timItem
-- SET UserFld3 = 1
Select distinct I.ItemID, V.VendID, D.ShortDesc, B.Name as ItemBuyer, BV.Name as VendorBuyer,
IC.ItemClassID, PPL.PurchProdLineID, isNUll(BI.QtyOnHand,0) AS QtyOnHand,
IV.QtyOnPO, IV.QtyONSo, IV.QtyONBo, W.WhseID, ((IV.QtyOnPO + isNUll(BI.QtyOnHand,0) - IV.QtyOnSO - IV.QtyOnBO)) as Available,
IV.MaxStockQty, IV.MinStockQty, IV.MaxStockQty - IV.MinStockQty AS SafetyStock, I.UserFld6 as Rank, I.UserFld3,
-- Case
-- WHEN I.UserFld3 = 0
-- THEN '1'
-- ELSE I.UserFld3
-- END
-- as PackQty,
CASE
WHEN (IV.MaxStockQty - IV.MinStockQty) <> 0
THEN ((IV.QtyOnPO + isNUll(BI.QtyOnHand,0) - IV.QtyOnSO - IV.QtyOnBO) / (IV.MaxStockQty - IV.MinStockQty))
ELSE 0
END
AS MonthsOnHand,
CASE
WHEN ((IV.QtyOnPO + isNUll(BI.QtyOnHand,0) - IV.QtyOnSO - IV.QtyOnBO)) < IV.MinStockQty
THEN IV.MaxStockQty - ((IV.QtyOnPO + isNUll(BI.QtyOnHand,0) - IV.QtyOnSO - IV.QtyOnBO)) --* I.UserFld3
END
as QtyNeed, I.StdBinQty,
CASE
WHEN ((IV.QtyOnPO + isNUll(BI.QtyOnHand,0) - IV.QtyOnSO - IV.QtyOnBO)) < I.StdBinQty
THEN I.StdBinQty
WHEN ((IV.QtyOnPO + isNUll(BI.QtyOnHand,0) - IV.QtyOnSO - IV.QtyOnBO)) > I.StdBinQty
******This is the number I need rounded *****THEN ROUND(IV.MaxStockQty - (IV.QtyOnPO + isNUll(BI.QtyOnHand,0) - IV.QtyOnSO - IV.QtyOnBO) / I.userfld3), -2)))
END
AS OrdQty
from timwhsepurchprodln WPL
INNER JOIN TAPvENDOR v ON WPL.PrimaryVendKey = V.VendKey
INNER JOIN timPurchProdLine PPL ON WPL.PurchProdLineKey = PPL.PurchProdLinekey
inner join timInventory IV ON PPL.PurchProdLinekey = IV.PurchProdLinekey
INNER Join timBuyer B ON IV.BuyerKey = B.BuyerKey
INNER Join timBuyer BV ON V.BuyerKey = BV.BuyerKey
INNER JOIN timItem I ON I.ItemKey = IV.ItemKey
INNER JOIN timItemClass IC ON I.ItemClassKey = IC.ItemClassKey
INNER JOIN timWarehouse W ON W.WhseKey = IV.WhseKey
INNER JOIN timItemDescription D ON I.ItemKey = D.ItemKey
INNER JOIN timItemUnitOfMeas IUOM ON I.ItemKey = IUOM.ItemKey
INNER JOIN tciUnitMeasure UM ON IUOM.TargetUnitMeasKey = UM.UnitMeasKey
LEFT JOIN
(SELECT ItemKey, SUM(QtyOnHand) AS QtyOnHand
FROM timWhseBinInvt
GROUP BY ItemKey) BI ON BI.ItemKey = I.ItemKey
where IV.WhseKey = 22
and I.Status = 1
and ((IV.QtyOnPO + isNUll(BI.QtyOnHand,0) - IV.QtyOnSO - IV.QtyOnBO)) < IV.MinStockQty
order by VendID
View 18 Replies
View Related
Mar 13, 2007
I have the following sp which is appending records into my table. However the values appended are being round up eg
SC_PrimaryPupilPrice is 1.5
but when it is inserted into the sql table it is 2
The field in the sql table is numeric.
CREATE PROCEDURE spSM_AddWeeksandMealPrices
@dteWeekEnding datetime
as
INSERT INTO tblSM_Meals
(ML_Id,
ML_WeekEnding,
ML_SchoolNumber,
ML_PupilMealPrice,
ML_AdultMealPrice,
ML_SpillagesMealPrice,
ML_AdultRechargeMealPrice,
ML_ReservedMealPrice)
select convert(varchar,@dteWeekEnding ,103) + '*' + cast(SC_SchoolNumber as varchar(10)) , convert(datetime,@dteWeekEnding ,106),
SC_SchoolNumber,
SC_PrimaryPupilPrice,
SC_PrimaryAdultPrice,
SC_PrimaryPupilPrice,
SC_PrimaryAdultPrice,
SC_PrimaryAdultPrice
from tblSM_Schools
GO
View 4 Replies
View Related
Feb 21, 2006
I have a problem...Data transformation rounds or truncate decimals!I have an ODBC source in witch is a table with float numbers (ODBC Driverpublish it as float).If I build a query form access or from excel with Query Analizer, I see alldecimal places, but when I try to insert data using DTS, float numbers willbe converted to its integer values.A "select * from table", with table ODBC table, gives integer value whenrunned from DTS to transform data from ODBC to MS-SQL Server table, andgives float values from Access or other tools.Where I can fix my problem?Thanks.Giorgio
View 1 Replies
View Related
Mar 25, 2008
When ISELECT CAST(96.58 AS DECIMAL(10 , 0)), it returns 97.When ISELECT CAST(575629 / 54 AS DECIMAL(10 , 0)), why it returns 10659? Itshould return 10660, right?What am I missing?Thanks,Faye Larson
View 1 Replies
View Related
Jul 20, 2005
Perhaps someone can settle an arguement for me ?I have a set of data that I need to group together. SQL Script below.CREATE TABLE [dbo].[CommTransactions] ([ID] [id_type] NOT NULL ,[TransactionID] [id_type] NULL ,[ClientID] [id_type] NULL ,[AccountCode] [varchar] (10) NULL ,[Amount] [float] NULL ,[CreateDateTime] [datetime] NULLFor the records I want to group the following applies.The ID is unique and distinct.The TransactionId is the same.The ClientId is the same.The AccountCode is different.The Amount will be the same.The CreateDateTime field is different by a few milliseconds.I want to create a single line showing two account codes in differentfields. i.e. Staff and Manager (where their ID is the account code).These can be entered in any order in the table mentioned.The problem I have is I need to link two records together (that's theproblem in it's most simplistic terms). However, there may beadditional records with the same TransactionId, ClientId, AccountCodeand Amount, but happened at a slightly different time. It could bedone on the same day.Now, the arguement is that we can group using the CreateDateTimefield. I argue that we can't as it will show down to the millisecondand any rounding will not always allow for a match. If we added thematching records once per day, then I can extract the date and groupon it, but if more than one group is added per day, then this wouldcause the logic to fail.So, are there any reliable methods for grouping date/time fieldsreliably if there is a small difference (I suspect not)?Is there anything I have missed ?Any help or suggestions would be appreciated.ThanksRyan
View 4 Replies
View Related
Feb 20, 2008
I have 2 record with same value A and B
A = 150.68273
B = 0.002000
1st Record A+B = 150.68473
2nd Record A+B = 150.68473
In the report column both of the result added up will show as 150.68, format code= N2
Now the diffrence is when i do the subtotal.
It gives me Diffrent value when i use
SUM(Round(Fields!ACCINT.Value + Fields!INTADV.Value,2)) = 301.36
and
SUM(Fields!ACCINT.Value + Fields!INTADV.Value) (format code= N2) = 301.37
why?
View 4 Replies
View Related
Dec 5, 2007
Hi All,
Is there a way in T-SQL using the round command to always round up regadless of the value.
For example:ROUND(normal_hours * pay_rate * 52, - 3) AS Expr3
normal_hours = 36
pay rate = 23.64
weeks in year = 52
(36 * 23.64) * 52 = 44,254.08
It rounds to 44,000. I want 45,000. Is this possible. Am I overlooking the obvious?
Thanks in Advance and Happy Holidays!!!!!!!!Adam
View 9 Replies
View Related
Apr 6, 2006
Hi,
How can I round a value to the next int number like all values > 1 and < 2 I need to round to 2 and on and on...to all numbers
So If I have 2.1 it's 3 if I have 2.9 it's 3 ...and so on...
Thanks
View 3 Replies
View Related
Nov 5, 2007
I'm trying to manipulate the data in my Service_2 column to round off the Estimated_Miles to the closest 5K miles. I tried the round function (Round(EstimatedMiles, -4)) but this does not exactly give me the results I want. Below is my result set:
Row_ID
Service_2
Estimated_Miles
1
40000
44012
2
50000
46124
3
120000
121512
4
30000
31857
5
10000
7547
6
80000
79500
And below is what I'd like to have
Row_ID
Service_2
Estimated_Miles
1
45000
44012
2
50000
46124
3
125000
121512
4
35000
31857
5
10000
7547
6
80000
79500
The range of data I'm working with is pretty broad meaning my Min & Max Estimated_Miles is between 0 - 1,000,000. In essence, I would like to say is if the estimated mileage is between 0-4999 then Service_2 = the closest 5K miles otherwise round to the closest 10K miles. Any help is truly appreciated. Thanks
View 11 Replies
View Related
Feb 29, 2008
Hi,
I am trying to create a report on some data. I have about 8 tables and 30+ queries attached to those 15 reports. In one of those reports I want to get the percentage based on the data in the tables and queries. Say I have the minimum hours for an employee as 176 hours and the employee works for 227 hours in a month. I want to see the result in percentage.
My report looks something like this :
ID Name Oct Nov Dec Jan Feb March Total
001 alex 87.6% 104.1% 65.1% 50.2% 85.6%
002 Linda 87.4% 109.1% 68.1% 35.2% 90.8%
003 Jon 87.6% 104.1%
004 alex 87.6% 104.1% 65.1% 50.2% 85.6%
005 Linda 87.4% 109.1% 68.1% 35.2% 90.8%
For the 002 ID, though he has worked for Nov and Dec the total % is blank.
The formula that I used for all of these entries is :
=IIf(IsError([total]),"",[total])
and for the month it is : =IIf(IsError([Oct]),"",[oct]), nov and so on.
It works fine for all, but where ever there is blank in one field it doesn;t calculates for the others too..
Please help, how can I get the total for all.
Thanks,
Farn
View 1 Replies
View Related
Aug 23, 2006
I am trying to round this data, but can't find a good resource on this. If my results are 15.6 I need it to round down to 15.5 and if my results are 15.4 I need it to round down to 15.0.ROUND(DATEDIFF(mm, employee.emp_begin_accrual, GETDATE())
* employee.emp_accrual_rate - SUM(ISNULL(request_1.request_duration, '0')), .5) Any help would be greatly appreciated. A link to a good reference on rounding would help too.Thanks in advance!!!
View 8 Replies
View Related
Nov 15, 2007
I have a field in my SQL Server 2005 database of type numeric(18,3)In code, I treat the value as decimalWhen creating my command parameters, this is how I'm declaring them:prm.SqlDbType = SqlDbType.Decimal;prm.Precision = (byte)int.Parse("18");prm.Size = int.Parse("0");prm.Scale = (byte)int.Parse("3");Inserting a number like 5.687 is rounding to 6.000 anyone know why it is doing that?
View 5 Replies
View Related
Jun 18, 2008
I have a strange problem: Stored procedure to feed a report.The SP created a temp table and one of the fields is Decimal(8,1)The sequence of building this field is: Insert integer from a table Update the field: this is a simple division formula, the result could be a decimal and I want it upto 1 place only: Update #tempTable Set theDecimalField = IntegerField/IntegerFieldFinal SP that puts all together is just a select * from #tempTable.After verifying the math, one of the records should should give 1.6 in the DecimalField, the math being 40/24: I get a 2.0 instead.What am I missing? This is literally driving me crazy.
View 3 Replies
View Related
May 28, 2004
SQL Server seems to round this down:
AVG(DATEDIFF(d, startdate, enddate))
I've tried using ROUND(AVG(DATEDIFF(d, startdate, enddate)), 0) but it still rounds down.
For example, if the result is 1370.758, I want it to round to 1371.
Am I missing something?
Thanks.
View 1 Replies
View Related
Feb 16, 2012
This give me 6 digits to the right of the decimal point - can round it to 2???
CONVERT (decimal(18 , 2), 1.0 * NULLIF (vVotesR, 0) / NULLIF (vVotesR + vVotesD, 0) * 100)
View 3 Replies
View Related
