Dear brothers, still have problem with .net compact framework 1.1 (2003) when i try to sync the data between sqlce and sql server 2000 " not from the first time some times from several times of using the syncronization"
is there any services pack for sql ce
what is appropriate cab file(.NET COMPACT FRAMEWORK, SQLCE etc is ARMI,ARM4....) version for windows mobile 5 with intermec CN3 Device
ISSUE: While synchronizing data between the PDA and MS SQL Server database, using Active Sync connection, the sync process fails at times and displays an empty error message box and occasionally it shows the following exception: Error During Synchronization: A native exception occurred. ExceptionCode:0xc0000005 ExceptionAddress:0x01627b28 Reading: 0x1e000000 OK to terminate CANCEL to debug Moreover the .SDF file on the PDA gets corrupted. The ActiveSync connection drops as soon as the sync process fails. Later when the .SDF file is deleted and restored the synchronization is successful. Note: The replication monitor in the SQL Server indicates that the synchronization was successful even when the above error occurs.
View 3 Replies View RelatedHi!
Here are the details:
- Merge replication is set up between SQL Server 2000 SP3 <-> SQL CE clients
- It is expected for the system to have 100-150 PDA users
- About 80-90 tables are being replicated. About half of the tables are for documents that PDA users create. These tables have to be filtered by SUSER_SNAME() to minimize data transfered and not to allow users to see each others documents. For filtering we used join filters (now there is about 30-40 join filters)
- Tables shared by users have GUID primary key, while other tables have identity columns.
System seemed to work fine when number of tables and number of join filters was about half that it is now.
Now, occasionally we get Native exception 0x00000005 on the PDA after calling Synchronize method of the C# Replication object. Data is transfered to the server, but the application hangs.
In the documentation for SQL Server it is mentioned that performance may suffer from too many join filters so this may be the cause of our problem.
If this is source of the problem one solution would be to use simple horizontal filtering on all tables now included in the join filters (and to add username field to all these tables). We could also reduce number of join filters with denormalisation (which we are not inclined to do).
Any other suggestions? Is our assumption about the source of the error corect?
Can anyone give us some recommendations for database metrics (number of constraints, tables, join filters etc) that can (or do) work with sql ce merge replication.
Thanks!
Greetings,
I have written a very basic C# console test app to check the performance and reliability of SQLCE on Windows CE 5.0 (source code below). Running this on different Windows CE 5.0 devices, I always get a 0xc0000005 native exception error when reaching 25592 inserts. It doesn't matter whether the database is empty or not when the test is run, it always fails at that exact number of inserts. Given that I would expect a managed application not to be able to generate native exceptions anyway, and can't really see any reason why it would in this case, I'm at a bit of a loss as to what's going wrong... Any ideas?
Using:
VS2005 w/ SP1
Windows CE 5.0 (on custom SH4 platform and HTC WM5 smartphone)
.NET CF 2.0 w/ SP1 and post SP1 patch
SQLCE 3.0.3600.0
TIA
PS. The same code (with some SQLCE 3.0 specific bits removed - version and result set for checking table existence) works perfectly under .NET CF 1.0 and SQLCE 2.0).
Source code:
using System.Data;
using System.Data.SqlServerCe;
namespace TestDB
{
class Program
{
static void Main(string[] args)
{
SqlCeConnection sqlConnection = new SqlCeConnection();
SqlCeCommand sqlCommand = sqlConnection.CreateCommand();
SqlCeResultSet sqlResult;
string strDatabase = "\TestDB.sdf";
string strTable = "TestTable";
try
{
// Database connection string
sqlConnection.ConnectionString =
"Data Source=" + strDatabase;
// Database file doesn't exist?
if (!System.IO.File.Exists( strDatabase ))
{
Console.WriteLine("Creating database: " + strDatabase);
// Create SQL engine object
SqlCeEngine sqlEngine = new SqlCeEngine(
sqlConnection.ConnectionString);
// Use it to create database
sqlEngine.CreateDatabase();
}
Console.WriteLine("Opening database: " + strDatabase);
// Open database connection
sqlConnection.Open();
// Display SQL version
Console.WriteLine("SQL Version: "
+ sqlConnection.ServerVersion.ToString());
// Check if table exists
sqlCommand.CommandText = "SELECT TABLE_NAME FROM "
+ "INFORMATION_SCHEMA.TABLES WHERE "
+ "TABLE_NAME = '" + strTable + "'";
sqlResult = sqlCommand.ExecuteResultSet(
ResultSetOptions.Insensitive);
// Table doesn't exist?
if (!sqlResult.Read())
{
Console.WriteLine("Creating table: " + strTable);
// Create table
sqlCommand.CommandText = "CREATE TABLE " + strTable
+ "(Sequence integer IDENTITY(1,1) NOT NULL PRIMARY KEY, "
+ "Timestamp datetime DEFAULT GETDATE(),"
+ "Message nvarchar(80))";
sqlCommand.ExecuteNonQuery();
}
string strText;
for (int i = 1; i <= 500000; i++)
{
Console.Write("
Inserted " + i.ToString() + " records ");
strText = "Row Number: " + i.ToString();
sqlCommand.CommandText = "INSERT INTO " + strTable
+ " (Message) VALUES ('" + strText + "')";
sqlCommand.ExecuteNonQuery();
}
}
// SQL error
catch(SqlCeException sqlex)
{
// Display all error messages
Console.WriteLine( "ERROR:" );
foreach (SqlCeError sqlError in sqlex.Errors)
{
Console.WriteLine( sqlError );
}
}
// Other errors
catch(Exception ex)
{
// Display error message
Console.WriteLine( "ERROR:" );
Console.WriteLine( ex.Message );
}
finally
{
// Close connection
if (sqlConnection.State != ConnectionState.Closed)
{
Console.WriteLine("Closing database");
sqlConnection.Close();
}
}
Console.ReadLine();
}
}
}
I found a peculiar thing today while working with SQL Mobile in a multithreaded application (VS2005, application for Pocket PC 2003).
I created a class which has one SqlCeConnection object. Every time I call a function to insert/select/delete something from the local db, I open the connection, execute the query an then close the connection again.
But when I'm calling a function from the db class in thread 1 and in the meantime call a different function (from the same db class of course) in thread 2, things go wrong. Because when function 1 wants to close the connection, function 2 is still using the connection and it will crash my application with a native exception (0xC0000005: access violation).
I can see why the error is happening, but shouldn't there be a nice .NET handled exception instead of a native exception which grinds my app to a hold?
(A workaround I use now is to use multiple connection objects instead of one, but I thought I'd give this feedback anyway)
Hi,
I have developed a Smart Device Application using VB.NET 2003 on top of Windows Mobile 2003 platform which is running on Symbol PPT 8846, a model used in our construction sites for gathering data bar-coded on Pipes, trucks...etc. This application uses SQL CE as its back-end database and since its difficult to cover our sites with WI-FI coverage, most of the time the application is running offline. As for that, on a daily basis, synchronization is done in the offices before the system is released into sites. I have been doing several implementations in several projects and till now everything is running fine but until I got a native exception on exporting the data back into the server database. The server database or main database is using Fox Pro and this is what led me to build a Web Service for communication between SQL CE and Fox Pro. Anyways, going back to that mysterious exception, I did some of my intensive debug on what caused it. As a start, I went through the code line by line to check if there was a memory leak from P/Invokes; but I was shocked that the exception was raised from "SQLCEDataAdapter.Fill(Dataset)" function. First thought came to mind was to hard reset and to re-install the application but no luck. Since it was about SQLCE, I moved towards checking the data found in the SQLCE database and tried to de-fragment the data found under the table needed for export. What I mean by de-fragmenting is that I grouped the data under different classes or families and created different tables depending on these classes. Then tried exporting again and Bingo the data was exported except one record...That was so weird!! huh? (The database had 515 records)
So I went for the Query Analyzer to try to view that record but no hope, it was taking too long to view the record, I just left it for more than 15 minutes and still no response from the Analyzer...it was so strange since there was only one record in that table!!!?!!! As going further, I was so curious why this record causing that native and inability to be viewed by the Analyzer?? I did testing on the column-level of that record and found out that you can view all the columns except two : nvarchar(200) and nvarchar (20)....I was able to resolve this problem with an SQL statement to update both columns with empty or dummy values...!!!!!
But after this resolution, I really don't know how it could be controlled later on!! and why it happened??
I would be glad if anyone can give me any advise on why such problem popped out and especially on the column-level in SQL CE?? And how to overcome it?
Thanks for your time and effort,
Looking forward to hear from as soon as possible...
Just for Clarification:
.NET CF 1.0 SP3
SQLCE 2.0
were used
Hi All,
We have written a multithreaded application in which we are maintaining separate Database connections for each thread. these connections are opened and closed at the start and exit of the thread.
We have observed that even if there is only one thread running ( application thread), execution of simple Select queries some times throws Native exception(Error - 0xc0000005 ).
This error comes intermittently. Execution of same query doesn't throw exception.
Further investigation by breaking the debug at the time of native exception and then looking into the stack trace shows that native exception has occured at one of the Native API (CompileQueryPlan() ) which is being called implicitly by the SQL Mobile.
Each time when we see native exception stack trace shows failure at CompileQueryPlan() call.
Let me know if this is a known defect in SQL Mobile 2005 or there is something else that is causing native exception.
Thanks,
Nikhil
Greetings everyone, I am attempting to build my first application using Microsofts Sql databases. It is a Windows Mobile application so I am using Sql Server Compact 3.5 with Visual Studio 2008 Beta 2. When I try and insert a new row into one of my tables, the app throws the error message shown in the title of this topic.
'((System.Exception)($exception)).Message' threw an exception of type 'System.NotSupportedException'
My table has 4 columns (i have since changed my FavoriteAccount datatype from bit to Integer)
http://i85.photobucket.com/albums/k71/Scionwest/table.jpg
Account type will either be "Checking" or "Savings" when a new row is added, the user will select what they want from a combo box.
Next is a snap shot of my startup form.
http://i85.photobucket.com/albums/k71/Scionwest/form.jpg
Where it says "Favorite Account: None" in the top panel, I am using a link label. When a user clicks "None" it will go to a account creation wizard, and set the first account as it's primary/favorite. As more accounts are added the user can select which will be his/her primary/favorite. For now I am just creating a sample account when the label is clicked in an attempt to get something working. Below is the code used.
private void lnkFavoriteAccount_Click(object sender, EventArgs e)
{
FinancesDataSet.BankAccountRow account = this.financesDataSet.BankAccount.NewBankAccountRow();
account.Name = "MyBank Checking Account";
account.AccountType = "Checking";
account.Balance = Convert.ToDecimal("15.03");
account.FavoriteAccount = 1;//datatype is an integer, I have changed it since I took the screenshot.
financesDataSet.BankAccount.Rows.Add(account);
//The next three lines where added while I was trying to get this to work.
//I don't know if I really need them or not, I receive the error regardless if these are here or not.
this.bankAccountTableAdapter1.Update(financesDataSet);
this.financesDataSet.AcceptChanges();
refreshDatabase();
}
the refreshDatabase() code is here:
private void refreshDatabase()
{
this.bankAccountTableAdapter1.Fill(this.financesDataSet.BankAccount);
//Aquire a count of accounts the user has
int numAccounts = financesDataSet.BankAccount.Count;
//Loop through each account and see which one is the primary.
for (int num = 0; num != numAccounts; num++)
{
//Works ok in frmMain_Load, but when my lnkFavoriteAccount_click calls this, it throws the error.
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
{
//Display the primary account on our home page. User can click the link label & be taken to their account register.
this.lnkFavoriteAccount.Text = this.financesDataSet.BankAccount[num].Name.ToString();
this.lnkFavoriteFunds.Text = this.financesDataSet.BankAccount[num].Balance.ToString();
break;
}
}
}
and my form_load code
private void frmMain_Load(object sender, EventArgs e)
{
refreshDatabase();
}
So, when I click on the lnkFavoriteAccount label, and my new row gets added, the app stops at the following line in my DataSet.Designer
[global:ystem.Diagnostics.DebuggerNonUserCodeAttribute()]
public byte FavoriteAccount {
get {
try {
return ((byte)(this[this.tableBankAccount.FavoriteAccountColumn]));
}
catch (global:ystem.InvalidCastException e) {
//Stops at the following line, this error was caused by 'if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)'
throw new global:ystem.Data.StrongTypingException("The value for column 'FavoriteAccount' in table 'BankAccount' is DBNull.", e);
}
}
set {
this[this.tableBankAccount.FavoriteAccountColumn] = value;
}
}
I have no idea what I am doing wrong, all of the code I used I retreived from Microsofts help documentation included with VS2008. I have tried used my TableAdapter.Insert() method and it still failed when it got to
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
in my refreshDatabase() method it still failed.
When I look, the data has been added into the database, it's just when I try to retreive it now, it bails on me. Am I retreiving the information wrong?
Thanks for any help you guys can offer.
Johnathon
Does anyone know where to find the native datatype formats of sqlserver6/7?
View 1 Replies View RelatedHowdy folks!
Next question of the day:
I have four data types that I can't (or at least I think I can't) use a _variant_t for conversion. The four types are:
- bigint (I'm sending to a LARGE_INTEGER data structure)
- guid (I'm sending to a GUID data structure)
- numeric (I'm sending to a DB_NUMERIC data structure)
- datetime (I'm sending to a DBTIMESTAMP data structure)
I'm looking for a way to locally convert (i.e. not a provider conversion) each to a string. For all the other data types I've been able to cast using _variant_t's, but with these I can't seem to find a way. What are y'all suggestions for working with these data types?
Thanks!
Is there a as400/db2 native provider to extract data?
View 9 Replies View RelatedHi,
I got an strange problem with one of my packages.
When running the package in VisualStudio it runs properly, but if I let this package run as part of an SQL-Server Agent job, I got the message "The script threw an exception: Exception of type 'System.OutOfMemoryException' was thrown." on my log and the package ends up with an error.
Both times it is exactly the same package on the same server, so I don't know how the debug or even if there is anything I need to debug?
Regards,
Jan
I am getting the above error if i try to access sqlce3.0 database from an application which already uses sqlce2.0,
this error happens while initializing the sqlcecommand object
I hope the reason might be executing the the sqlcecommand through a sqlce2.0 engine on a sqlce3.0 database,
But I tried installing the sqlce3.0 in the PDA , still I am getting the same error
I would be thankfull if anyone could solve this
Thanks
Varadan
With "bcp MyDatabase.dbo.MyTable out C:MyFile.Dat -n -T" command line, I could get an exported data file. And I can also import this file into MyTable using 'BULK INSERT MyDatabase.dbo.MyTable FROM 'C:MyFile.dat' WITH (DATAFILETYPE='native');' query statement.
Now, I want to make my own data file just like made by bcp above. Although I could make file of 'char' type, 'native' type file is needed for performance and other reasons. And the format file should not be used.
Any one help?
Hi.
Is it possible to transmit custom data from SQL 2005 to the client via Exception.Data[key]=value?
The idea
I have a number of SPs that accept userId parameter which must be verified. I have written a simple CLR SP (check_userid_valid) which performs the verification of the userId parameter's value. If the parameter's value is considered invalid an exception is thrown. When the exception (System.Exception) is instantiated additional data is added via the Data property of the exception:
System.Exception ex = new System.Exception();
ex.Data["Source"] = "check_userid_valid"
So, any SP that calls the check_userid_valid with invalid userId is expected to "crash" and the exception with all the additional data is expected to be propagated back to the client which, in turn, could read the data.
Unfortunately, it seems that the ex.Data contains only entries put by the MS SQL 2005 server itself, eliminating the rest.
The question is: how can I supply additional exception data with the exception I do throw from my CLR code on the server-side, so that is can be consumed at the client-side.
Hi, there;
I use ASP.NEP to create a SSIS package to import data from .dbf file. When I import data from a big file (216,173KB) my package throw exception:
An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: The specified network name is no longer available.
".
The "input "OLE DB Destination Input" (71)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (71)" specifies failure on error. An error occurred on the specified object of the specified component.
The ProcessInput method on component "OLE DB Destination" (58) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Thread "WorkThread0" has exited with error code 0xC0209029.
Thread "SourceThread0" has exited with error code 0xC0047038.
An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "TCP Provider: The specified network name is no longer available.
".
The "input "OLE DB Destination Input" (77)" failed because error code 0xC020907B occurred, and the error row disposition on "input "OLE DB Destination Input" (77)" specifies failure on error. An error occurred on the specified object of the specified component.
The ProcessInput method on component "OLE DB Destination" (64) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
Thread "WorkThread0" has exited with error code 0xC0209029.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Thread "SourceThread0" has exited with error code 0xC0047038
Does anybody know what the problem is?
Thanks.
Hi there,
I have a Data Flow task which uses an XML File Source with six parellell Outputs, each going firstly to a Data Conversion Task, then the results of each end in a SQL Server Destination Object. (All using the SQL Native Client)
To eplain this further, the Xml file contains 6 different types of elements, the Dataflow splits out each type of element and processes them into different tables. The Data Transformation object exists only because the XML fields are Uni-code and the table fields are VarChar not nVarChar.
Initially using this setup I found that the Connection would timeout using the SQL Native Client so I changed the Timout on the Destination Objects to 0. This fixed the problem to some degree, however at present I can run the Pakage using the Visual Studio enviroment and everything works fine, no problem. When I run the Dtsx file using the SQL Server Agent, I end up getting the error below...
Error: 2007-12-14 14:33:19.16 Code: 0xC0202009 Source: Import XML File to SQL SQL - CP [2746] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from
I understand that this error is somewhat of a 'catch all' and that the way the Native SQL Server Connection object works makes Error Capturing difficult. I have tried a few things which I will list as I'm sure they will be suggested...
I have played around with the 'MaxInsertCommitSize' property of the SQL Server Destination Objects to no avail (IE, changing to 50000, 10000, 1000 all of which resulted in the same problem)
I am running the ssis pakage from the server which is the destination
As mentioned above the Timeout on the SQL Server Destination Objects is set to 0
What I have already mentioned and still don'tt quite understand is that I can run the job successfully from the Visual Studio enviroment but as a job run off the SQL Server it fails...
Can
Dear all,
we have tables with many image columns. We fill these image columns via ODBC and SQLPutData as described in MSDN etc (using SQL_LEN_DATA_AT_EXEC(...), calling SQLParamData and sending the data in chunks of 4096 bytes when receiving SQL_NEED_DATA).
The SQLPutData call fails under the following conditions with sqlstate 08S01
- The database resides on SQL Server 2000
- The driver is SQL Native Client
- The table consists e.g. of one Identity column (key column) and nine image columns
- The data to be inserted are nine blocks of data with the following byte size:
1: 6781262
2: 119454
3: 269
4: 7611
5: 120054
6: 269
7: 8172
8: 120054
9: 269
The content of the data does not matter, (it happens also if only zero bytes are written), nor does the data origin (file or memory).
All data blocks including no 7 are inserted. If the first chunk of data block 8 should be written with SQLPutData the function fails and the connection is broken. There are errors such as "broken pipe" or "I/O error" depending on the used network protocol.
If data no 7 consists of 8173 bytes instead of 8172 all works again.
(Changing the 4096 chunk size length does not help)
Has anybody encountered this or a similar phenomenon?
Thank you
Eartha
Hi,
I need some suggestions how to achive the followings using Data Flow Task?
I have a csv file containing some logs from a different system. CSV file contains columns Code & ErrorMessage.
I also have a SQL table called filters. This table also contains code column.
I need to do the following two things
1. Get all record from csv file where code does not exists in Filters (SQL table)
2. Gell all record from csv file where code does exists in Filters(SQL Table) and ErrorMessage contains a specific keyword.
I can add a derived column with the following function
IsExists = FINDSTRING(ErrorMessage,"MyKeyword",1) which will tells me if MyKeyword contains in the message but I donot know how to filter IsExists > 0 and how to do exception join?
Thanks
Shafiq
Hi,
I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer.
plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll"
Thanks !SqlConnection conn = new SqlConnection(DbConnectionString);
conn.Open();
SqlCommand cmd = conn.CreateCommand();
cmd.CommandText = "dbo.rqryTradesPRR";
cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ;
SqlDataReader reader = cmd.ExecuteReader();
while(reader.Read())
{
// have written something here
}
Thanks in advance !
I have a dataset with 500,000 records and I'm getting the following error with ReportViewer control for local report. "An error has occurred during local report processing. An error has occurred during report processing. Exception of type System.OutOfMemoryException was thrown. any help with this would be highly appreciated.
View 1 Replies View RelatedHi guys,
View 4 Replies View RelatedI have an app running Windows CE 5.0 and SqlServerCE 3.0. Occasionally, one of the production units will throw an exception with the following stack trace but no exception message:
Exception Msg:
Stack Trace: at System.Data.SqlServerCe.SqlCeCommand.ProcessResults()
at System.Data.SqlServerCe.SqlCeCommand.CompileQueryPlan()
at System.Data.SqlServerCe.SqlCeCommand.ExecuteCommand()
at System.Data.SqlServerCe.SqlCeCommand.ExecuteReader()
at System.Data.SqlServerCe.SqlCeCommand.ExecuteReader()
at XX.MobileApp.frmXXX.LoadData()
This is not something that I have been able to reproduce in our shop. I even take their database and run it here in our shop with out such errors. Does anyone know some possible causes for this error?
Sorry, I don't have more info to give becuase this is all I have to work with since I cannot reproduce in our shop. If the exception object exposes a property for the HResult, I would be able to provide that.
I appreciate your repsonses.
How to use Microsoft Data Link(Udl) type file to connect with SQL Server using SQL Native Client,If i use OLDEDB Connection i can make connection using UDL file with Database ,but how can i use a file for a connection using SQL Native Client.Is there any other data link file that can be used to connect with SQL server using SQL Native Client.
View 5 Replies View RelatedHello Coders,
I need help fixing a problem in my code that I do not understand. I basically have a procedure that is supposed to take all user information and then insert it to the DB or update the Database based on user entry.
The call to the method is this
Dim bankname As String = ""
If (objBill.BillTransaction(Session("conString"), Session("whattobill"), PROC_CURR, Session("lISN"), 0, Session("fISN"), Request.ServerVariables("REMOTE_ADDR"), "scott@mycleanstart.com", Session("fAmount"), Session("first_name"), Session("last_name"), Session("city"), Session("state"), Session("phone"), Session("address1"), Session("address2"), Session("postal_code"), Session("email_address"), Session("fDesc"), Session("ssn"), Session("nameoncard"), Session("PAN"), Session("cvv"), Session("cardexpirationdate"), bankname, Session("txtroutingnumber"), Session("txtaccountnumber"), Session("txtchecknumber"), Session("bqISN"), _
returnedbqISN, AuthCode, OrderNumber, DeclineCode, TermCode, ErrorMessage, authenticationValue, authenticationTransactionID, str_Centinal_ECI, "signup", PAResStatus, SignatureVerification, paypalSubAgreeID, notificationLocation, strErrorNo, strErrorDesc, strTransactionID, strStatus, strStatusCode, strReasonCode)) Then
And then below is the actual method itself........
NOTE: The code below is contained in a DLL
1 public bool BillTransaction(string strDBInstance, string ccORach, string whichProcessor,Int32 lISN, Int32 mISN,
2 Int32 fISN, string ip,string merchant_email,string total_amount,
3 string firstname, string lastname, string city,string state, string phone, string address1,string address2, string zip, string customer_email,
4 string product_desc, string socialsecuritynum, string nameoncard, string creditcardnumber, Int32 cardverifynum, DateTime cardexpiredate,
5 string bankname, string routingnumber, string accountnumber, string checknumber, Int32 bqISN,
6 ref Int32 returnedbqISN, ref string AuthCode, ref string OrderNumber, ref string DeclineCode,
7 ref string TermCode, ref string ErrorMessage,
8 string authenticationValue,string authenticationTransactionID,string eci,string transactiontype,
9 string PAResStatus, string SignatureVerification, string paypalSubAgreeID, string notificationLocation,
10 ref string strErrorNo, ref string strErrorDesc, ref string strTransactionId, ref string strStatus,
11 ref string strStatusCode, ref string strReasonCode)
12
13 {
14
15 if (ccORach.Trim().Length <= 0)
16 {
17 ErrorMessage = "CC or Check?";
18 return false;
19 }
20
21 if (whichProcessor.Trim().Length <= 0)
22 {
23 ErrorMessage = "Blank processor";
24 return false;
25 }
26
27 decimal grand_total = Convert.ToDecimal(decimal.Parse(total_amount).ToString("N2"));
28 string ProcessorResponse="";
29 Database db = DatabaseFactory.CreateDatabase(strDBInstance);
30 DBCommandWrapper dbCmdWrapper = null;
31 bool retBilling = true;
32 string sql = "";
33 string bqAction = "SBILL";
34 string strFirstName = "";
35 string strLastName = "";
36 string[] cardname = nameoncard.Split(new char[] {' '});
37 strFirstName = cardname[0];
38 for (int i=1; i <= cardname.GetUpperBound(0); i++)
39 {
40 strLastName = strLastName + ' ' + cardname[i].Trim();
41 }
42
43 MCS_Encryption.Encryption mcscrypt = new MCS_Encryption.Encryption();
44 //card number
45 string enc_cardnumber = mcscrypt.Encrypt(creditcardnumber);
46 //account number
47 string enc_accountnumber = mcscrypt.Encrypt(accountnumber);
48
49 if (bqISN > 0)
50 {
51 //if bqISN is present, do UPDATE instead
52 sql = "spUpdateBillingQ";
53 dbCmdWrapper = db.GetStoredProcCommandWrapper(sql);
54 dbCmdWrapper.AddInParameter("@bqISN",DbType.Int32,bqISN);
55 dbCmdWrapper.AddInParameter("@email",DbType.String,customer_email);
56 dbCmdWrapper.AddInParameter("@bankname",DbType.String,bankname);
57 dbCmdWrapper.AddInParameter("@routingnumber",DbType.String,routingnumber);
58 dbCmdWrapper.AddInParameter("@accountnumber",DbType.String,enc_accountnumber);
59 dbCmdWrapper.AddInParameter("@checknumber",DbType.String,checknumber);
60 dbCmdWrapper.AddInParameter("@nameoncard",DbType.String,nameoncard);
61 dbCmdWrapper.AddInParameter("@cardnumber",DbType.String,enc_cardnumber);
62 dbCmdWrapper.AddInParameter("@cardverifynum",DbType.Int32,cardverifynum);
63 dbCmdWrapper.AddInParameter("@cardexpirationdate",DbType.DateTime,cardexpiredate);
64 dbCmdWrapper.AddInParameter("@billaddress1",DbType.String,address1);
65 dbCmdWrapper.AddInParameter("@billaddress2",DbType.String,address2);
66 dbCmdWrapper.AddInParameter("@billcity",DbType.String,city);
67 dbCmdWrapper.AddInParameter("@billstate",DbType.String,state);
68 dbCmdWrapper.AddInParameter("@billzip",DbType.String,zip);
69 dbCmdWrapper.AddInParameter("@billphone",DbType.String, phone);
70 dbCmdWrapper.AddInParameter("@ip",DbType.String, ip);
71 dbCmdWrapper.AddInParameter("@fISN",DbType.Int32, fISN);
72 dbCmdWrapper.AddInParameter("@price",DbType.Currency, grand_total);
73 dbCmdWrapper.AddInParameter("@description",DbType.String, product_desc);
74 dbCmdWrapper.AddInParameter("@bqaction",DbType.String, bqAction);
75 dbCmdWrapper.AddInParameter("@creditamount",DbType.Currency, 0);
76 dbCmdWrapper.AddInParameter("@processor",DbType.String, whichProcessor);
77 db.ExecuteNonQuery(dbCmdWrapper) ;
78
79 returnedbqISN = bqISN;
80 }
81 else
82 {
83 //insert into billingQ or update if bqISN is passed
84 sql = "spInsertBillingQ";
85 dbCmdWrapper = db.GetStoredProcCommandWrapper(sql);
86 dbCmdWrapper.AddInParameter("@lISN",DbType.Int32,lISN);
87 dbCmdWrapper.AddInParameter("@mISN",DbType.Int32,mISN);
88 dbCmdWrapper.AddInParameter("@email",DbType.String,customer_email);
89 dbCmdWrapper.AddInParameter("@bankname",DbType.String,bankname);
90 dbCmdWrapper.AddInParameter("@routingnumber",DbType.String,routingnumber);
91 dbCmdWrapper.AddInParameter("@accountnumber",DbType.String,enc_accountnumber);
92 dbCmdWrapper.AddInParameter("@checknumber",DbType.String,checknumber);
93 dbCmdWrapper.AddInParameter("@nameoncard",DbType.String,nameoncard);
94 dbCmdWrapper.AddInParameter("@cardnumber",DbType.String,enc_cardnumber);
95 dbCmdWrapper.AddInParameter("@cardverifynum",DbType.Int32,cardverifynum);
96 dbCmdWrapper.AddInParameter("@cardexpirationdate",DbType.DateTime,cardexpiredate);
97 dbCmdWrapper.AddInParameter("@billaddress1",DbType.String,address1);
98 dbCmdWrapper.AddInParameter("@billaddress2",DbType.String,address2);
99 dbCmdWrapper.AddInParameter("@billcity",DbType.String,city);
100 dbCmdWrapper.AddInParameter("@billstate",DbType.String,state);
101 dbCmdWrapper.AddInParameter("@billzip",DbType.String,zip);
102 dbCmdWrapper.AddInParameter("@billphone",DbType.String, phone);
103 dbCmdWrapper.AddInParameter("@ip",DbType.String, ip);
104 dbCmdWrapper.AddInParameter("@fISN",DbType.Int32, fISN);
105 dbCmdWrapper.AddInParameter("@price",DbType.Currency, grand_total);
106 dbCmdWrapper.AddInParameter("@description",DbType.String, product_desc);
107 dbCmdWrapper.AddInParameter("@bqaction",DbType.String, bqAction);
108 dbCmdWrapper.AddInParameter("@creditamount",DbType.Currency, 0);
109 dbCmdWrapper.AddInParameter("@processor",DbType.String, whichProcessor);
110 returnedbqISN = 0;
111 returnedbqISN = (Int32)db.ExecuteScalar(dbCmdWrapper) ;
112
113 }
114
115
116
117 //bill credit card or ACH
118 switch (ccORach.Trim())
119 {
120 case "CC":
121 retBilling = BillCreditCard(whichProcessor,ip,merchant_email,grand_total, strFirstName.Trim(), strLastName.Trim(),
122 city,state, phone, address1,address2, zip, customer_email,
123 product_desc, socialsecuritynum,creditcardnumber, cardverifynum, cardexpiredate,returnedbqISN,
124 ref AuthCode, ref OrderNumber, ref DeclineCode, ref TermCode, ref ErrorMessage, ref ProcessorResponse,
125 authenticationValue,authenticationTransactionID, eci, transactiontype, PAResStatus, SignatureVerification);
126 break;
127 case "ACH":
128 retBilling = BillACH(whichProcessor, ip,merchant_email, grand_total, firstname, lastname,
129 city,state, phone, address1,address2, zip, customer_email,
130 product_desc, socialsecuritynum,bankname, routingnumber, accountnumber, checknumber, returnedbqISN,
131 ref AuthCode, ref OrderNumber, ref DeclineCode, ref TermCode, ref ErrorMessage, ref ProcessorResponse);
132 break;
133 case "PAYPAL":
134 retBilling = BillPayPal(ip,merchant_email,grand_total,firstname,lastname,
135 city,state,phone,address1,address2,zip,customer_email,
136 product_desc,socialsecuritynum,returnedbqISN, paypalSubAgreeID, notificationLocation,
137 ref strErrorNo, ref strErrorDesc, ref strTransactionId, ref strStatus,
138 ref strStatusCode, ref strReasonCode);
139 break;
140 }
141
142 //insert into billingDetail
143 char bqRecurring = 'N';
144 sql = "spInsertBillingDetail2";
145 dbCmdWrapper = db.GetStoredProcCommandWrapper(sql);
146
147 dbCmdWrapper.AddInParameter("@mISN",DbType.Int32,mISN);
148 dbCmdWrapper.AddInParameter("@bqISN",DbType.Int32,returnedbqISN);
149 dbCmdWrapper.AddInParameter("@bdamountcollected",DbType.Currency,grand_total);
150 dbCmdWrapper.AddInParameter("@bdtransactioncode",DbType.String,AuthCode);
151 dbCmdWrapper.AddInParameter("@bdstatus",DbType.Boolean,retBilling);
152 dbCmdWrapper.AddInParameter("@bdauthcode",DbType.String,AuthCode);
153 dbCmdWrapper.AddInParameter("@bdordernumber",DbType.String,OrderNumber);
154 dbCmdWrapper.AddInParameter("@bdtracecode",DbType.String,returnedbqISN);
155 dbCmdWrapper.AddInParameter("@email",DbType.String,customer_email);
156 dbCmdWrapper.AddInParameter("@bankname",DbType.String,bankname);
157 dbCmdWrapper.AddInParameter("@routingnumber",DbType.String,routingnumber);
158 dbCmdWrapper.AddInParameter("@accountnumber",DbType.String,enc_accountnumber);
159 dbCmdWrapper.AddInParameter("@checknumber",DbType.String,checknumber);
160 dbCmdWrapper.AddInParameter("@nameoncard",DbType.String,nameoncard);
161 dbCmdWrapper.AddInParameter("@cardnumber",DbType.String,enc_cardnumber);
162 dbCmdWrapper.AddInParameter("@cardverifynum",DbType.Int32,cardverifynum);
163 dbCmdWrapper.AddInParameter("@cardexpirationdate",DbType.DateTime,cardexpiredate);
164 dbCmdWrapper.AddInParameter("@billaddress1",DbType.String,address1);
165 dbCmdWrapper.AddInParameter("@billaddress2",DbType.String,address2);
166 dbCmdWrapper.AddInParameter("@billcity",DbType.String,city);
167 dbCmdWrapper.AddInParameter("@billstate",DbType.String,state);
168 dbCmdWrapper.AddInParameter("@billzip",DbType.String,zip);
169 dbCmdWrapper.AddInParameter("@billphone",DbType.String, phone);
170 dbCmdWrapper.AddInParameter("@ip",DbType.String, ip);
171 dbCmdWrapper.AddInParameter("@bqrecurring",DbType.String, bqRecurring);
172 dbCmdWrapper.AddInParameter("@Message",DbType.String, ErrorMessage);
173 dbCmdWrapper.AddInParameter("@ProcessorResponse",DbType.String, ProcessorResponse);
174 dbCmdWrapper.AddInParameter("@processor",DbType.String, whichProcessor);
175
176 dbCmdWrapper.AddInParameter("@strErrorNo",DbType.String, strErrorNo);
177 dbCmdWrapper.AddInParameter("@strErrorDesc",DbType.String, strErrorDesc);
178 dbCmdWrapper.AddInParameter("@strTransactionId",DbType.String, strTransactionId);
179 dbCmdWrapper.AddInParameter("@strStatus",DbType.String, strStatus);
180 dbCmdWrapper.AddInParameter("@strStatusCode",DbType.String, strStatusCode);
181 dbCmdWrapper.AddInParameter("@strReasonCode",DbType.String, strReasonCode);
182
183
184 Int32 returnedbdISN = 0;
185 returnedbdISN = (Int32)db.ExecuteScalar(dbCmdWrapper) ;
186 if (retBilling)
187 {
188 if (UpdateBillingQStatuses(strDBInstance,returnedbqISN,'S'))
189 {
190 return true;
191 }
192 }
193 else
194 {
195 if (UpdateBillingQStatuses(strDBInstance,returnedbqISN,'F'))
196 {
197 return false;
198 }
199 }
200 return false;
201
202 }
While making a connection to a SQL server Enterprise Database using ASP.Net(C#), during execution of .aspx file i got the following error :-
Kindly help me if anybody knows the solution .
Thanks in advance
Login failed for user 'IT-CELLIWAM_IT-SERVER'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'IT-CELLIWAM_IT-SERVER'.
Source Error:
Line 52: //mycommand.SelectCommand.CommandType=CommandType.StoredProcedure;
Line 53: DataSet ds=new DataSet();
Line 54: mycommand.Fill(ds);
Line 55: DataTable dt;
Line 56: dt=new DataTable();
Source File: c:inetpubwwwrootetapplogin.aspx.cs Line: 54
Stack Trace:
[SqlException: Login failed for user 'IT-CELLIWAM_IT-SERVER'.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +484
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +372
System.Data.SqlClient.SqlConnection.Open() +384
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +44
System.Data.Common.DbDataAdapter.FillFromCommand(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +304
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +77
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet) +38
netapp.login.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootetapplogin.aspx.cs:54
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
I made a point type by C# for deploying in SQL2005.
It builds successfully every time.
When I deploy, it gives the following error:
"Error: Type "SqlServerProject1.TypePoint" is marked for native serialization, but field "x" of type "SqlServerProject1.TypePoint" is not valid for native serialization." although x variable is value type decimal.
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
[Serializable]
[SqlUserDefinedType(Format.Native, IsByteOrdered=true)]
public struct TypePoint : INullable
{
private bool m_Null;
private Decimal x;
private Decimal y;
public override string ToString()
{
// Replace the following code with your code
if (IsNull) // added part
{
return "null";
}
else
{
return x + ":" + y;
} // end of this part
// return "";
}
public bool IsNull
{
get
{
// Put your code here
return m_Null;
}
}
public static TypePoint Null
{
get
{
TypePoint h = new TypePoint();
h.m_Null = true;
return h;
}
}
public static TypePoint Parse(SqlString s) // Most Important Part
{
if (s.IsNull)
{
return Null;
}
else // added part
{
TypePoint p = new TypePoint();
string str = s.ToString();
string[] xy = str.Split(':');
p.x = Decimal.Parse(xy[0]);
p.y = Decimal.Parse(xy[1]);
return p;
}
}
public Decimal X
{
get
{
return x;
}
set
{
x = value;
}
}
public Decimal Y
{
get
{
return y;
}
set
{
y = value;
}
} // end of added part
// This is a place-holder method
public string Method1()
{
//Insert method code here
return "Hello";
}
// This is a place-holder static method
public static SqlString Method2()
{
//Insert method code here
return new SqlString("Hello");
}
// This is a place-holder field member
public int var1;
}
Is it possible to do a native BCP from 7.0 to 6.5? I'm having all sorts of data issues when I try.
Would a character bcp work (albeit slowly) instead?
Hello.
Does anybody knowk if it's necessary to upgrade Sql Native Client to conect to a Server when you has upgrade it to Sql 2005 SP2? That is to say, can you conect to a Sql server 2005 SP1 and to a Sql Server 2005 SP2 from a client with the same Sql Native client or you have also to upgrade it?
Thanks.
We have a VB6 app that we're trying to connect to an SQL2005 server.
We're able to connect from dev machines that have SQLExpress, or SQL 2005 tools installed, but we cannot connect from other machines. We've installed sqlncli.msi from the MS site, but this still doesn't work. When we try to login, we get an error that reads "0[Microsoft][SQL Native Client]Fractional truncation" when we try writing to a smalldatetime field. This problem does not happen on the dev machines.
Connection string:
connectiontype = cnnSQLServer
database name = name
pasword = password
userid = uid
servername = servername
driver = {SQL Native Client}
Driver version on the dev machines is: 2005.90.3042.00
Driver version on the roll out machines is: 2005.90.1399.00
What are we doing wrong?
Zeke.
Hi
I need to browse SQL servers on local and network computers in a native C++ program (MFC / ADO).
I developped a .NET module based on SqlDataSourceEnumerator (works fine), but I cannot use it in my program (CLR is not allowed).
-> Is it possible to use SqlDataSourceEnumerator in a native C++ program (=without CLR) ?
We're upgrading from SQL2K to 05 next week. We want to push the SQL Native Client driver(ODBC) thru the network but IT said it can only be an msi or exe file. Is their anyway we could get this file in this format?
View 4 Replies View RelatedHi all,
Ms SQL Server Native Error 18456 !! Login Failed.
Pls help me out.
Thanx in Advance