We have a requirement of creating a report which has one data set
And the same data set is being used accross different tables in the report. The tables differ by the type of grouping applied on them.
My situation is
1. The table has two groups applied
a) table level group is on DIVISION
b) detail grouping is done based on two columns:
SYSTEM and NAME
2. When i use the expression rownumber("DIVISION") or rownumber("SYSTEM_NAME"), it does not return a proper sequence
I need the row numbers to be generated based on the grouping on (SYSTEM and NAME) for each DIVISON
I am trying to write a stored procedure to be used for custompaging and I get error with the below SP. "Msg 207, Level 16, State 1, Procedure GetDealersPagedSP, Line 14 Invalid column name 'RowRank'." What am I doing wrong? CREATE PROCEDURE dbo.GetDealerSP (@startRowIndex int,@maximumRows int)AsSELECT installersemaid,dealerid,[name],address1,address2,city,[state],zip,phone,faxFrom(SELECT installersemaid,dealerid,[name],address1,address2,city,[state],zip,phone,fax, ROW_NUMBER() OVER(ORDER BY [name] DESC)AS RowbankFROM dealerenrollment)as DealerWithRowNumbersWHERE Rowbank > @startRowIndex AND RowRank <= (@startRowIndex + @maximumRows)Go
I understand that if using this function with "nothing" between parentheses, then the running row total never resets.
However, I am hoping to have the row counter reset when a group value changes. I tried putting both the field and the defined group name in the parentheses both with and without quotes, but I get an error.
What is the correct syntax for accomplishing this?
I got problem with using custom paging in sql 2005 SET ANSI_NULLS OFF GO SET QUOTED_IDENTIFIER OFF GO ALTER PROCEDURE [dbo].[searchperson_view_general] @Search nvarchar(2000) ,@OrderBy nvarchar (2000) ,@PageSize int ,@PageIndex int AS DECLARE @PageLowerBound int DECLARE @PageUpperBound int
SET @PageLowerBound = @PageSize * @PageIndex SET @PageUpperBound = @PageSize - 1 + @PageLowerBound
--Default order by to first column IF (@OrderBy is null or LEN(@OrderBy) < 1) BEGIN SET @OrderBy = 'p.[person_id]' END
-- SQL Server 2005 Paging declare @SQL as nvarchar(4000) SET @SQL = 'WITH PageIndex AS (' SET @SQL = @SQL + ' SELECT distinct' IF @PageSize > 0 BEGIN SET @SQL = @SQL + ' TOP ' + convert(nvarchar, @PageUpperBound) END
SET @SQL = @SQL + ' ROW_NUMBER() OVER (ORDER BY ' + @OrderBy + ') as RowIndex ' SET @SQL = @SQL + ', p.[person_id]' SET @SQL = @SQL + ', p.[userType_id]' SET @SQL = @SQL + ', p.[fullName]' SET @SQL = @SQL + ', p.[gender_nm]' SET @SQL = @SQL + ', p.[dateOfBirth] ' SET @SQL = @SQL + ', p.[positionTitle]' SET @SQL = @SQL + ' FROM dbo.[person_view] p '
IF LEN(@Search) > 0 BEGIN SET @SQL = @SQL + @Search END SET @SQL = @SQL + ' ) SELECT distinct' SET @SQL = @SQL + ' p.person_id' SET @SQL = @SQL + ', p.userType_id' SET @SQL = @SQL + ', p.fullName' SET @SQL = @SQL + ', p.gender_nm' SET @SQL = @SQL + ', (year(getdate()) - year(p.[dateOfBirth])) as [dateOfBirth] ' SET @SQL = @SQL + ', p.positionTitle' SET @SQL = @SQL + ' FROM PageIndex p ' SET @SQL = @SQL + ' WHERE RowIndex > ' + convert(nvarchar, @PageLowerBound)
IF @PageSize > 0 BEGIN SET @SQL = @SQL + ' AND RowIndex <= ' + convert(nvarchar, @PageUpperBound) END
SET @SQL = @SQL + ' ORDER BY ' + @OrderBy exec sp_executesql @SQL
I checked my store procedure with parameters exec [hr2b_searchperson_view_general_load] 'LEFT OUTER JOIN qualification ON p.person_id = qualification.person_id WHERE qualification.institutionName like N''%ABC%''' ,' p.person_id asc ', 25 , 1
This is a actual query show :
WITH PageIndex AS ( SELECT distinct TOP 49 ROW_NUMBER() OVER (ORDER BY p.person_id asc ) as RowIndex , p.[person_id] , p.[userType_id] , p.[fullName] , p.[gender_nm] , p.[dateOfBirth] , p.[positionTitle] FROM person_view p LEFT OUTER JOIN qualification ON p.person_id = qualification.person_id WHERE qualification.institutionName like N'%ABC%' ) SELECT distinct p.person_id , p.userType_id , p.fullName , p.gender_nm , (year(getdate()) - year(p.[dateOfBirth])) as [dateOfBirth] , p.positionTitle FROM PageIndex p WHERE RowIndex > 25 AND RowIndex <= 49 ORDER BY p.person_id asc
If I used this query without using DISTINCT it will return extactly number of records which I expected but It is duplicated. Then I tried to use DISTINCT in this query number of records return is less than 25 records . Because it was duplicated records when I used LEFT OUTER JOIN.But my query will be able to use more LEFT OUTER JOIN than this query. Please help me get exactly 25 records?
This is my tables person_view(person_id, fullname, userType_id, gender_nm, dateOfBirth, positionTitle)
I have a detailed report ..with summary lines and detailed lines (drill down).
I have a column with a function "RowNumber(Nothing)" which is supposed to just count the rows
when I put this in the summary row for the column I need in the Design Layout section and run the report, I get numbers on the summary lines which include the number of rows in the level below (detailed rows).
I just want to number the summary rows sequentially without taking into consideration, the number of detailed rows.
How do I modify RowNumber(Nothing) to exclude counting the detailed rows....???
Hi, I create a matrix table with wizard. I want to write rownumber() as a new column near my column. But when =Rownumber(nothing) it returns the value of the record in the dataset. If the data in the 56.row then =Rownumber(nothing) =56 But in the preview of table it is in 1.row.
I have a requirement to find the rowmumbers based on a group. I know there is Rownumber function in sql. How can I implement the same in DAX. PFA screenshot. Rownumber is the calculated field i want based on the id and name column group.
Not nice but a work around: is there a way to get the amount of fields or rows from a table or query within MS SQL, to pick out the lastfield-4 for example ?
I will try my best to explain this, We have a shopping cart on our website, the person that was developing this has now left the company and I've been given the job to finish it off.
When I load all the items that the user has entered in to his/her cart I return the Item ID and the RowNumber (ROW_NUMBER() OVER (Order by Id) AS RowNumber)
I'm trying to delete the item from the table using the following query
DELETE FROM [dbo].[Cart.Items] WHERE UniqueID = UniqueID and ItemID = @ItemID and @RowNumber IN ( SELECT ROW_NUMBER() OVER (Order by Id) AS RowNumber)
Now the reason we are using the RowNumber is because the user can add the same Item as many times as they like so for example you buy 3 different mobile phones, and you want three screen protectors, they will click screen protector 3 times which will add 3 records in to the db with the same id. so the row number is used to find the correct one.
The script below works but i have a break when datediff (days,startdate, endate) reaches 0. For every bookidm i want to iterate till the datediff is zero then move on to next bookid and do the same thing.
I have a report with details grouping on table. What i need to do is put row number only on Parent row and skip the child row. When i use RowNumber("GroupName") of course it gives me a current RowNumber. Is there a way to count only parents?
I have a sales report that is pulling up data and displaying the detailed lines and the aggregate/summary lines grouped by a single field.
THe report say has 10 summary/aggregate lines and each summary lines have a maybe 20 more lines to it.
I want to NUMBER the SUMMARY lines only. In a new column on the summary line cell, if I type, =RowNumber(Nothing), I get a count of all its sub-lines displayed. How can I limit the scope of numbering to just the summary lines and make sure it does not include the sub lines involved ?
i am working on a small "Biztalk" engine, by creating dynamic ssis packages that change according to the client source file definition.
in order to create a row-number to each row in my input file, i am tryng to add the Konesans's Row Number component to the dynamic package by using SSIS API, but i get a lot of errors. the component is not created as a"rowNumber" component, but as a General Managed Component, though i use the ComponentClassID as the classID in the RowNumber component.
has anybody try to do this ?
is there any way to get the row number other then this way?
I have got question because time is running but I still don't know how to do it.
So I have 1 group with 3 rows and I would like to put for each row not only group individual number like 1,2,3,4,5 ... etc until end of report. Generally using fuction RowNumber I got 1,2,3 and then 1,2,3 again.
I have to import data from a flatfile into our datawarehouse. The supplier of the flat file isn't able to give me a delta, he just gives me a flat files with all the changes on a certain table. So for instance when a row in a table is updated 3 times, I get 3 rows in my flatfile with the 3 updates and I only need the last one. The determine wich record is updated I need to combine 6 columns to be sure if I'm looking at the right row in the source database. Is their a way to accomplish this? I'm pretty new to those advanced SSIS things and I tried to look for a way to do it with conditional splits etc...
