I am interested in changing the way that data is displayed in my result set.Essentially I want to display a selection of rows (1 to n) as columns, the following diagram explains my intentions.Perhaps one of the greatest challenges here is the fact that I do not have a concrete number of rows (or BIN numbers). Each stock item could be stored in one or more BINS, which I will not know until running my query.
I am trying to compare Sales value of year 2015 with sales value of 2016 and the difference stored in alias column as Sales_growth for year 2016 , for year 2015 the alias column be as '1' similarly difference between margin of 2015 and 2016 and result stored in alias column as margin_rate in year 2016for 2015 as 1 but when there is no record for year 2015 and record present in 2016 for a given (month, SM,SG,CUST,SP) then the alias column sales_growth and margin_rate should be 100
last record : as there is no record for year 2015 and record present in 2016 for a given (month, SM,SG,CUST,SP) then the alias column sales_growth and margin_rate should be 100
Hi, I need to create a table which has the columns from the select statement result. I tried in this way drop table j9a SELECT er.* into j9a FROM caCase c LEFT OUTER JOIN paPatient pp ON c.caCaseID=pp.caCaseID Left Outer JOIN paManagementSite pm ON pp.paManagementSiteID=pm.paManagementSiteID Left Join exexposure ee ON ee.cacaseID=c.caCaseID LEFT OUTER JOIN exExposureRoute eer ON eer.caCaseID=c.caCaseID LEFT OUTER JOIN exRoute er ON er.exRouteID=eer.exRouteID WHERE c.caCallTypeID =0 AND c.Startdate between '1/1/2006' and '12/1/2006' AND (ee.exMedicalOutcomeID=4 OR ee.exMedicalOutcomeID=10) AND pp.paSpeciesID=1 AND c.PublicID_adOrganization_secondary is null
set @21=(select count(*) from j9a whereIngestion=1) set @22=(select count(*) from j9a whereInhalation/nasal=1) set @23=(select count(*) from j9a whereAspiration=1) set @24=(select count(*) from j9a whereOcular=1) set @25=(select count(*) from j9a whereDermal=1) set @26=(select count(*) from j9a whereBite=1) set @27=(select count(*) from j9a whereParenteral=1) set @28=(select count(*) from j9a whereOtic=1) set @29=(select count(*) from j9a whereRectal=1) set @30=(select count(*) from j9a whereVaginal=1) set @31=(select count(*) from j9a whereOther=1) set @32=(select count(*) from j9a whereUnknown=1)
Create table table9(Route varchar(30),Fatal int) insert into table9 values ('Route_Ingestion',@1,@21) insert into table9 values ('Route_Inhalation',@2,@22) insert into table9 values ('Route_Aspiration',@3,@23) insert into table9 values ('Route_Ocular',@4,@24) insert into table9 values ('Route_Dermal',@5,@25) insert into table9 values ('Route_Bite',@6,@26) insert into table9 values ('Route_Parenteral',@7,@27) insert into table9 values ('Route_Otic',@8,@28) insert into table9 values ('Route_Rectal',@9,@29) insert into table9 values ('Route_Vaginal',@10,@30) insert into table9 values ('Route_Other',@11,@31) insert into table9 values ('Route_Unknown',@12,@32)
select * from table9
The exRoute result is like this 70 Ingestion 71 Inhalation 72 Aspiration 73 Ocular 74 Dermal 75 Bite/sting 76 Parenteral 77 Other 78 Unknown 524 Otic 525 Rectal 526 Vaginal
The above giving the errors Msg 207, Level 16, State 1, Line 19 Invalid column name 'Ingestion'. Msg 207, Level 16, State 1, Line 20 Invalid column name 'Inhalation'.
I have started working on SSAS since last week, I need to perform some calculations on the data fetched from the cube based on the parameters. SSRS is used to display the output and SSAS is used as a data source.
How i could perform the operations on the data fetched from the cube in SSAS? Does SSAS provides the storage structure like temp table in stored procedure where we can perform the various operations before sending final data back to the client side tool(SSRS)?
OR Is there any alternative way to perform the operations based on the input provided through the parameters
I have questions and answers from one table, I need to select questions as column names and answers column values as the results for the questions column.
Hello,I am trying to follow along with the Data Access tutorial under the the "Learn->Videos" section of this website, however I am running into an error when I try to use the "Edit -> Update" function of the Details View form: I'll post the error below. Any clues on how to fix this? Thanks in advance!!! ~DerrickColumn name 'Assigned_To' appears more than once in the result column list. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Column name 'Assigned_To' appears more than once in the result column list.Source Error: Line 1444: } Line 1445: try { Line 1446: int returnValue = this.Adapter.UpdateCommand.ExecuteNonQuery(); Line 1447: return returnValue; Line 1448: }
hiI want to increase a varchar(5000)to varchar(8000) on a table thathas approximately million rows.....What is the impact on the serveror any good recomendations of a action to accomplish this in the best andfastest way.thanks davep
What is the easiest way to return rows 200 through to 300 of a 500 row result set using SQL? Is there a simple way of doing this or do I need to write some Transact SQL? Any ideas would be appreciated.
I have two tables that I am pulling data from to insert into a third table.
Table 1: Organization Address Date Name 404 St. 12/31/1999
Table 2: Organization Software Type Quantity Name SW1 5 Name SW2 6 Name SW3 7 Name SW4 8
My query looks something like this:
INSERT INTO Organization SW Reqs (Name, Address, Date, SW1 Quantity, SW2 Quantity, SW3 Quantity) SELECT Table 1.Name, Table 1.Address, Table 1.Date, (Select Table 2.Quantity Where Table 2.Software Type = 'SW1'), (Select Table 2.Quantity Where Table 2.Software Type = 'SW2'), (Select Table 2.Quantity Where Table 2.Software Type = 'SW3') FROM Table 1, Table 2 WHERE Table 1.Organization = Table 2. Organization
Sadly, this query gives me four rows, one for each Software Type. I have tried putting DISTINCT after my SELECT, but that narrows it down to two rows only. I would really like to have just a one row result per organization.
In the thread http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1071904&SiteID=1 mike.groh stated that you would define the result set as a data set variable through an execute sql task. He then pushed the variable out as a dataset type. (ds = CType(Dts.Variables("Email_CurrentDataset").Value, DataSet)
How would this type of object be declared as a user variable? Is it of type object? What is the logic behind converting a result set to a data set?
Specifically I am having problems with converting / casting the result set to a data set in that I am getting an error stating that it cannot convert the com object to a data.dataset class...
Imports ADODB
Imports System
Imports System.Xml
Imports System.Collections
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts
Imports Microsoft.SqlServer.Dts.DtsClient
Public Class ScriptMain
Public Sub Main()
Dim ds As DataSet
Dim dr As DataRow
Dim str As String
Dim dtm As String
Dim s As String
Try
ds = CType(Dts.Variables("resultSet").Value, DataSet) ' <-- Error on converting
Say you have an existing populated SQL 2005 database, with 700+ tables, and you want to just change the order of the columns inside every table. Short of manually building conversion scripts, anyone know an automated way to do this? I was thinking thru ways to do them all in one shot, and have tools like Erwin and DbGhost that could be used also. Basically moving some standard audit columns from the end of the tables to just after the PK columns.
In Sql Server 2005 Express I have this table:CREATE TABLE [dbo].[Sections]( [SectionID] [int] NOT NULL, [DocumentNo] [smallint] NULL, [SequenceNo] [smallint] NULL, [SectionNo] [smallint] NULL, [DocumentTypeID] [smallint] NULL, [SectionText] [ntext] NULL) Each paragraph of text (SectionText) is in its own row (SectionNo) Each primary document has a DocumentTypeID of 1 with three subdocument types (2=Index, 3=Background, 4=Report).I run this query and return a collection of single rows from various documents grouped together by DocumentNo: SELECT * FROM Sections WHERE CONTAINS (SectionText, 'exercise') ORDER BY DocumentNo For each row that contains the search term, I would like to return the full document (all rows as parapraphs within one row of returned data). In other words, I want to reconstitute the full document as it existed prior to being inserted into the database with paragraph separation. For exampe, if the search term is in row 3 of DocumentNo=5, DocumentTypeID=2, I want to return all the rows of that document in one block of text that retains paragraph format (preferablly with a line break and carriage return between paragraphs). How can this be done?
My site have a complicated search, the search give the results in two stages- the first one giving the number of results in each section:
"In the forums there is X results for the word X In the articles there is X results...."
And when the user click one of those lines, the list shows the specific results in that section.
My problem is that I don't know how to calculate the first part, for now I use dataset, and table.rows.count to show the number of results in each section. Since my site have more then ten, it looks like a great waste to fill such large dataset (in some words it can be thousands of rows in each section) only for getting the number of rows…
Are there is a sql procedure or key word that will give me only the number of results (the number of times that specific word showing in the columns?)
Hello! I have two similar servers (hardware) with SQL Server 2000 (SP1) on Win2000 (SP2). (sp_helpsort - default)
When I run the same SELECT statement from Query Analyzer on each machine I get different rows order in result Grid (the order of rows stays the same for each machine but different for machine1 and machine2)
SELECT table1.a, table1.b, table1.c, table1.d
FROM table2, table1, table3
WHERE table2.nTestDefnId = 1034 AND table2.nDefnId = table1.nDefnId AND table3.szClinDiscType = 'X' AND table2.nDiscId = table3.nDiscId
What is a reason for such behavior and how I can fix it?
I want to have a query like SELECT SettingKey, SettingValue FROM Settings WHERE SettingGroup='Comms' GROUP BY SettingSubGroup
where the result set has a single row for each distinct value of SettingGroup. I want the result set to look like: SettingSubGroup, Speed, Parity, DataBits, StopBits <--column headings ---------------- Com1, 9600, N, 8, 1 Com2, 2400, E, 7, 2
I've had a look at the PIVOT command but it seems to require an aggregate function... is there a way to simply flip from rows to columns?
Here's my need : In one directory there's several excels file. Theses file have the same structure : col : LOOKID, LOOKNAME, ASMPID, ASMPNAME, LOOKTYPE, LTYP_NAME, PAR_TYPE, PTYP_NAME, PARAMETER, VALUE. The problem is that the cell format of the PARAMETER col. is different bewteen excel files. It could be date, numeric, ... The col destination in sqlservr database is Varchar(10).
I've created the ssis package with a ForEach Loop, and in the ForEach loop I've created a Data Flow Task. In the data Flow Task I've created an excell source file (using excel file with col PARAMETER in date format) with an OLE DB destination.
When I launch the package on the same excel file as the one using to create Excel Source object it's OK, no errors, and data in the sql table are OK. But when I launch the package on Excel file with col. PARAMETER in numeric format, there's no execution errors, but in the destination table the value of the PARAMETER col. is transform in date format.
I tried to change in Excel source object the datatype of the input PARAMETER col, but I've got some compilations errors. It seems that SSIS recognize automaticaly excel source data type col. But may be I did something wrong in the excel source settings ? Is there a way to force the excel source datatype with varchar(10) ?
I've also tried to do the treatment with an script task but my vb.net knowledge isn't enought to do that.
Working in Sql Server 2005,got 3 different table.Need to fetch the list of persons.A person can belong to different categories.When i am using inner join on tables i am getting the duplicate rows because a perosn can belong to different categories.I want that there should be only onoe row for the person and the different categories he belongs to can come up in single field as comma sepatated string Now the results are like this: firstname lastname adress category abc xyz aaa a abc xyz aaa b abc xyz aaa c I want like below: abc xyz aaa a,b,c I am thinking of using cursors in the stored procedure.Can you provide me the solution of this including the stored procedure..
In MySQL we use "SELECT (....) LIMIT 0, 10" to only return the first 0 to 10 records. Alternatively we could do "LIMIT 10, 20" to return the 10th to 20th records.
I am using SLQ Server 2008 R2. The database was designed by another company.
I have two tables: Client and Client_Location. In the Client table the pk is Client_ID. There is also a unique key: sys_Client_ID. Both the Client_ID and the sys_Client_ID fields exist as a foreign keys in the Client_Location table. However, the fields are not noted as unique in the Client_Location table. There are two fields in the Client_Location table that determine when the address was effective. They are from_dt and end_dt.
Multiple records have been loaded into the Client_Location table to track old as well as current addresses of clients.
I'm trying to run a report that will pull clients with a plan_id constraint from the Client table and join the Client_Location table to retrieve the current address of these clients.
My SQL is:
select distinct (a.client_id), a.cli_last AS Last_Name, a.cli_first AS First_Name, a.cli_middle AS Mid_Init, b.city AS City, b.county AS County, b.state AS State from ECBH.dbo.tbl_Client a inner join ECBH.dbo.tbl_Client_Location b on a.client_id = b.client_id inner join ECBH.dbo.tbl_client_insurance c on a.client_id = c.client_id inner join ECBH_TEST.dbo.tbl_GEF_County d on b.county = d.COUNTY_NAME where c.plan_id = 4 order by a.cli_last, a.cli_first
Because multiple records exist in the Client_Location table, the result set has duplicates. How can I pull only the results where the from_dt is most recent?
I am trying to run queries on a table (table has zero rows). Inspite of giving 0 rows returned the query keeps on running and I have to cancel it. I tried inserting a dummy row into the table but even the insert operation is taking too long.Every query which I hit on the table just keeps on running without giving any result.
But this is not the case with other tables in the database.They are all running fine giving proper results. But this one table is behaving funny.
I worked with someone else to create a query that gives us the age of a stock. How long it has been in the warehouse since the Purchase order date (without completely selling out). It does exactly what I want, the problem is that it only accepts 1 row as a result.
The error message I get is:
quote:Msg 512, Level 16, State 1, Line 4
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
So my question is; can this code be modified to pass it multiple SKUS and run a report on every item currently in stock?
SELECT TOP 1 @skuVar, CAST(GETDATE()-ReceivedOn AS INT) AS 'Age' FROM (SELECT pir.id AS id,aggregateQty AS aggregateQty,-qtyreceived as qtyreceived, (aggregateQty - qtyreceived) AS Diff, ReceivedOn AS ReceivedOn ,( SELECT SUM (PurchaseItemReceive.qtyreceived) FROM bvc_product pp
I have a report that retrieves its data from Analysis Services. The data includes a count and dollar value of projects against their current status: It looks something similar to
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
In the report I hide the detail rows. I have a fixed/known number of statuses (in this case 4) and need to show all 4 in the report. eg
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1)status2 0 $0
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
ie in this case I need to show status 2 (that doesn't exist in the data set) with zero totals.
Does anyone know if this is possible to get SSRS to display each of the status groups (in a known fixed list) and then match them to the records in the dataset.
As an alternative, if I were using SQL Server I could add rows to the dataset using a union statement. Is there similar functionality using mdx? My mdx skills are very basic.
I am a bit confused for the model evaluation (lift chart), should we map all the columns for both the mining structure and the case table? I mean for those predictive models, we have a predict column, shouldnt we ignore the mapping of the predictive column between the mining structure and the case table? But it seemes we are not allowed to miss the predictive column mapping between the mining structure and the case table.
Why is that? Could any experts here give me some explanation on that?
Hope my question is clear for your help.
Thanks a lot and I am looking forward to hearing from you shortly.
TABLE [dbo].[Tbl_Products]( [Product_ID] [int] IDENTITY(1,1) NOT NULL, [Product_Name] [nvarchar](50) NOT NULL, [Catagory_ID] [int] NOT NULL, [Entry_Date] [date] NOT NULL,
[Code] ....
I am using this query to get ( Product name from tbl_products , Buy Price - Total Price- Total Quantity from Tbl_Details )
But am getting a multiple result if the order purchase has more than 1 item :
SELECT DISTINCT B.Product_Name,A.AllPieceBoxes, A.BuyPrice,A.TotalPrice,A.BuyPrice FROM Tbl_Products B INNER JOIN Tbl_PurchaseHeader C ON C.ProductId=B.Product_ID INNER JOIN Tbl_PurchaseDetails A ON A.PurchaseOrder=C.purchaseOrder WHERE A.PurchaseOrder=3
