Rows Not Being Inserted Regularly Into Database Table
Mar 28, 2007
Hello All,
Doe anyone know if any limitations with SQL Server Express may be causing this?
I have an application (a web service hosted on my local PC) that parses an InfoPath form and submits the data to a database (SQL Server Express). The problem I'm have is that new records are not always inserted into the database when I submit. There is an autoincrement ID field and I observed that every other record was successfully inserted (a day ago) and today I observed that the records were inserted intermittently. However, when I run the same application on a laptop, the records are inserted each time.
I posted the associated code on the Data Access forum but it occurred to me that it may be because of the nature of SQL Server Express.Any suggestions would be much appreciated. Thanks!
There is a stored procedure that inserts a row into 'Vendors' table. Is it possible that two different calls to this sp happen at the same time and as a result, each sp inserts into the table its row at exactly the same time?
In my ETL job I would like to truncate stg table but before truncating stging table, I want to make sure that all the records are inserted in the data model. The sample is as below
create table #stg ( CreateID int, Name nvarchar(10) ) insert into #stg select 1, 'a' union all select 2, 'b' union all
[Code] ....
How can I check among these tables and make sure that all values are loaded into the data model and the staging table can be truncated.
I am looking for a Sql query to verify the inserted values from one table(in CSV file) with another table(in sql database)
For example: I have below Values column that is present in once CSV file, after my data migration the values get stored in Results table under Message column.
I need to very whether values(1X,1Y) are inserted in Message record "successfully inserted value 1X"
Values (CSV) 1X 1Y
Results Table(SQL) CreatedDate Message 2015-08-04 08:45:29.203 successfully inserted value 1X 2015-08-04 08:44:29.103 TEst pass 2015-08-04 08:43:29.103 successfully inserted value 1X 2015-08-04 08:42:29.203 test point 2015-08-04 08:35:29.203 successfully inserted value 1Y 2015-08-04 08:30:29.203 Test Pass 2015-08-04 08:28:29.203 successfully inserted value 1Y
If all values are inserted:
Output: All values from values table are inserted successfully Total count of values inserted: 2 If only few values are inserted, example only 1X from Values table is inserted in Message
Example: Results Table CreatedDate Message 2015-08-04 08:45:29.203 successfully inserted value 1X 2015-08-04 08:44:29.103 TEst pass 2015-08-04 08:43:29.103 successfully inserted value 1X 2015-08-04 08:42:29.203 test point
Output: All values from values are not inserted successfully in result table. Total count of values inserted: 1 Missing Values not inserted in results table are: 1Y
I have a table in which i have to delete last n inserted rows, how should i approach this , Sql server does not provide any ROWGUID BASED ON TIMESATAMP i dnt think Rank() wil work either Any suggestions?
My ReportServerTempDB is full regularly .I had to shirink the database on regular interval though i schedule for shirinking on 30 minutes.But as soon there is any exception due to scripting the log is full and my all report manaer throws error. After shirinking the ReportServerTempDB the reports starts working fine.
Why does this code tell me that I inserted 2 rows when I really only inserted one? I am using SQL server 2005 Express. I can open up the table and there is only one record in it. Dim InsertSQL As String = "INSERT INTO dbCG_Disposition ( BouleID, UserName, CG_PFLocation ) VALUES ( @BouleID, @UserName, @CG_PFLocation )"Dim Status As Label = lblStatus Dim ConnectionString As String = WebConfigurationManager.ConnectionStrings("HTALNBulk").ConnectionString
Dim con As New SqlConnection(ConnectionString) Dim cmd As New SqlCommand(InsertSQL, con)
Dim added As Integer = 0 Try con.Open() added = cmd.ExecuteNonQuery() Status.Text &= added.ToString() & " records inserted into CG Process Flow Inventory, Located in Boule_Storage." Catch ex As Exception Status.Text &= "Error adding to inventory. " Status.Text &= ex.Message.ToString() Finally con.Close() End Try Anyone have any ideas? Thanks
Rajesh writes "Hi I have a table. I need to see the newly inserted row on the day. i.e. newly inserted data alone. I dont have any date field in the table."
HI, I am wondering if it is possible to retreive this information without using row count transform. Can I get the # of rows inserted/updated or deleted by destination from the log?
Hi, I am trying to create a SSIS package, which will extract data from a SQL server view and populate the data in our local SQL server database tables. My objective is to get the data from the view such that only inserted and updated rows are fetched from the view. Note: the view does not expose any updated date type of column thru which I can check. So I guess I have to compare each and every field with my destination table row's fields.
I would appreciate any suggestions on how to approach the problem. Thanks in advance.
we have a business use case that requires a software dashboard to display the current production backlog in our small business. Using SQL Server 2012 Express.ABC Co is our largest customer, they order a large number of items in a monthly order. We send these items in several shipments during the month, so the actual amount outstanding on each ABC Co order slowly decreases through the month. These orders are stored in the following tables:
ABC_OrdersSummary - stores each order - order no/date/total amount ABC_OrderedProducts - stores each product - order no/product code/quantity ABC_ShippedProducts - stores each shipped product - order no/product code/quantity
Products - stores all our products - product code/price etc.
To calculate the current outstanding orders value for ABC Co, we need to get the total of unfinished orders, then cycle through what has already been supplied on these orders, and subtract this value from the total unfinished orders value.Is there a way to keep a running total in the ABC_ Orders Summary table of the amount outstanding on each order? It wouldn't matter if it only updated every 5min - it'd just be more efficient than 10-15 software instances all calculating it at once.
I have a TableA where data get inserted from Excel(IMPORT/EXPORT wizard)
TableA; ID(identity) Date (NOT NULL Defaulyt Getdate() ) Name Phone 1 2014-06-17 17:28:21.190 Nick 12345678910 2 2014-05-17 17:28:21.190 Stan 00045678910 3 2015-08-17 17:28:21.190 Kim 11111678910 4 2015-08-17 17:28:21.190 Tom NUll
3,4 are the rows i have inserted now , you can see by date, likewise i have 100,000 rows(old and new combination) and now the data from excel to TableA can be imported/exported daily , hourly, weekly basis.
Now i want to find out only the rows which are imported to tableA today, or hours back, or yesterday .....
the reason is ,
Step1:get data from excel and import to tableA( this is a manual Step) and i know when the data is inserted with exact date and time.
Step2: get newly inserted rows from TableA and pass them as Parameters in Stored Procedure.( i may run step 2 after 1 hour, or after 1 day or after 1 week ,but i want only rows that are inserted )
I tried with using where Datecreated, but did work.
I have a table that sometimes has modifications to column(s) comprising the primary key [usually "end_date"]. I need to audit changes on this table, and naturally, turned to after triggers.
The problem is that for updates, when the primary key composition changes, I'm not able to relate/join using the primary key - obviously, it no longer matches across INSERTED and DELETED. Now, for a single row update, it's easy to check for updates on PK columns and then deduce what changes were made...
So the real question is: are rows in INSERTED and DELETED always in matching order (1st row in INSERTED corresponds to the 1st row in DELETED...)?
I don't want to put a surrogate key (GUID nor IDENTITY) on the base table if at all possible. INSERT... SELECT from the inserted/deleted tables into a temp table with identity column is fine, and is what I'm currently doing; I would like MVP or product engineer level confirmation that my ordering assumption is correct.
Testing using an identity surrogate key on base table, and selecting from the Ins/del tables, and the temp tables without an order by clause seems to always return in proper order (proper for my purposes). I've tested under SQL 2005 RTM, SP1, SP2, and SP2 "3152".
FYI, I've lost the debate that such auditing is better handled by the application, not the database server...
Aside: why doesn't the ROW_NUMBER() function allow an empty OVER( ORDER BY() ) clause? Will SQL ever expose an internal row_id, at least in the pseudo tables, so we can work around this situation?
I create a Trigger that allows to create news row on other table.
ALTER TRIGGER [dbo].[TI_Creation_Contact_dansSLX] ON [dbo].[_IMPORT_FILES_CONTACTS] AFTER INSERT AS
[code]...
But if I create an INSERT with 50 rows.. My table CONTACT and ADDRESS possess just one line.I try to create a Cursor.. but I had 50 lines with an AdressID and a ContactID differently, but an Account and an AccountId egual on my CONTACT table :
I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr] for insert as begin declare @liter as decimal(28,6)
I would like to know the best way to count and display the number of rows in a given database table called memberinfo. This should tell me how many members I have right? Thanks
I want to insert a row for a Global user in Table 'A' whenever ADO.Net code inserts a Local user row into same table. I recommended using a trigger to implement this functionality, but the DBA was against it, saying that stored proecedures should be used, since triggers are unreliable and slow down the system by placing unecessary locks on the table. Is this true OR the DBA is saying something wrong? My thinking is that Microsoft will never include triggers if they are unreliable and the DBA is just wanting to offload the extra DBA task of triggers to the programmer so that a stored procedure is getting called, so he has less headache on his hands.Thanks
I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
) ================================================= In my VB 2005 Express, I created a project "KimmelCallNWspWithAdoNet" that had the following code: --Form_Kimmel.vb-- Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form_Kimmel
Public Sub InsertCustomer()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
End Class ==============================================
I executed the Form_Kimmel.vb and I got no errors. But I did not get the new values insterted in the table "Custermers" of Northwind database. Please help and tell me what I did wrong and how to correct this problem.
Hi all!In a insert-trigger I have two joins on the table named inserted.Obviously this construction gives a name collition beetween the twojoins (since both joins starts from the same table)Ofcourse I thougt the usingbla JOIN bla ON bla bla bla AS a_different_name would work, but itdoes not. Is there a nice solution to this problem?Any help appriciated
Stepping thru the code with the debugger shows the dataset rows being deleted.
After executing the code, and getting to the page presentation. Then I stop the debug and start the page creation process again ( Page_Load ). The database still has the original deleted dataset rows. Adding rows works, then updating works fine, but deleting rows, does not seem to work.
The dataset is configured to send the DataSet updates to the database. Use the standard wizard to create the dataSet.
cDependChildTA.Fill(cDependChildDs._ClientDependentChild, UserId); rowCountDb = cDependChildDs._ClientDependentChild.Count; for (row = 0; row < rowCountDb; row++) { dr_dependentChild = cDependChildDs._ClientDependentChild.Rows[0]; dr_dependentChild.Delete(); //cDependChildDs._ClientDependentChild.Rows.RemoveAt(0); //cDependChildDs._ClientDependentChild.Rows.Remove(0); /* update the Client Process Table Adapter*/ // cDependChildTA.Update(cDependChildDs._ClientDependentChild); // cDependChildTA.Update(cDependChildDs._ClientDependentChild); } /* zero rows in the DataSet at this point */ /* update the Child Table Adapter */ cDependChildTA.Update(cDependChildDs._ClientDependentChild);
I thought it contained all data used in an insert; meaning if i enter a row in a table the inserted table should then contain all data entered?
Ive created multiple tables linked via primary key Learner_ID this key is unique to any/all students and can never be duplicated hence i thought i would use it to link the tables.
I have tables Fab / Main / Elec / Learner_info / WS_WR.
For Fab / Main / Elec the only data i need form Learner_info is the Learner_ID field, i simply used:
INSERT INTO FAB(Leaner_ID) SELECT Learner_ID FROM Inserted
as a trigger to insert the ID into these tables. Everything works perfectly fine. So i assumed that i would be able to use something very similar to insert say:
Learner_ID, FNAME, LNAME, ONAME and C_NUM from the learner_info table into the WR_WS table. Apparently i was wrong I can insert the learner_ID perfectly but if i then try to add another insert trigger eg: insert fname i get an sql error:
Cannot insert the value NULL into the column 'LEARNER_ID', table 'swdt_im.WS_WR'; column does not allow nulls. INSERT fails.
Now from reading the error it suggests to me that because the second trigger is running my learner_id value has become a NULL. Obviously a primary key wont accept this value so the statement fails.
What im struggling to understand, im sure i will solve the problem eventually but i would apreciate help, and this is most important to me rather than a solution is this:
If i enter data into a row on a table does that data go into the inserted table in the same row? or does the data go into inserted as a single entry row, meaning when i tab along from learner_ID into FNAME does Learner_ID become row 1 (in inserted) and FNAME the current row? or do they go into the appropriate columns?
I was under the assumption that i could enter:
LEARNER_ID / FNAME / LNAME / ONAME / C_NUM
into one table and have a trigger insert those values into multiple other tables. Dont suppose someone can help me out im alright querying a SQL db but ive never had to develop anything other than a single table one myself before
I am trying to use the following Query to create the table Agents and add rows to it.
USE REMAXCLASSIC; IF OBJECT_ID ('dbo.Agents', 'U') IS NOT NULL DROP TABLE Agents; GO CREATE TABLE Agents
[Code] ....
I get the following error messages: Msg 102, Level 15, State 1, Line 34 Incorrect syntax near '0.25' Msg 105, Level 15 mark after the character string ');
I would like to access the data inserted or deleted within a trigger. however the built-in tables -- inserted and deleted --- are not accessible. anyone knows why? And is there any other way to do this?
I'm writing a trigger for my DotNetNuke portal that requires me to read the value of a just inserted record. I believe I'm doing this right, still I'm unable to retrieve the desired value from the Inserted table. What am I doing wrong? Here is my code:
CREATE TRIGGER tr_addEditorRole ON [dbo].[UserPortals] AFTER INSERT AS Declare @Portal int set @Portal = (select PortalId FROM inserted)
Declare @TabId Int set @Tabid = (select TabID from Tabs where Tabs.PortalID = @Portal and Tabs.TabName = 'MyTab')
Declare @ModuleId int set @ModuleId = (SELECT ModuleId FROM Modules WHERE Modules.TabID = @TabId and Modules.ModuleTitle = 'MyModule')
Hello, I have 2 tables, and use objectdatasource and stored procedures, with sql server. Let say in the first table I have IDCustomer as a datakey, and other records, and in the second I have the same IDCustomer and CustomerName. I have an INSERT stored procedure that will create a new record in the first table (so generate a new IDCustomer value), and I would like to insert immediately this new value in the second table. How can I know the value of this new IDCustomer ? What is the best way to handle that ? Once the insert in the first table is done should read it the table and extract (with an executescalar) the value and then insert it in the second table ? This solution should work but I am not sure this is the best one. Thanks for your help.