For the below mentioned query their is repetition of rows with the same data.
SELECT srs.prod_area as PA,
srs.art as ArtNo,
b.adsc_unicode as ArtName,
cast(case when a.unit <> '2' then c.avsx/10 else c.avsx/1000 end as integer(2)) as AwsMHS,
cast(srs.estimate/10 as integer(1)) as AwsSRSThisWeek,
[Code] ....
I am running a query on multiple tables and the data I get back consists of several repeated rows but with one column different. I want to take out those repeated rows and for the column that is different join that data and separate it by a comma. Can this be done?
Ex.
Cindy Lair 111 Drury Circle Harrisburg Pennsylvania 717
Cindy Lair 111 Drury Circle Harrisburg Pennsylvania 610
Cindy Lair 111 Drury Circle Harrisburg Pennsylvania 310
So i would like this data to come up as:
Cindy Lair 111 Drury Circle Harrisburg Pennsylvania 717,610,310
Hi!
I am beginner on using SQL.
How can I select the repeated rows (five or more times) on a table which have the same ID's but different updated date. I do not need to group all the rows with the same ID,s but rows which are repeated many times according to the required reports needed.
Below are some information regarding tables and views:
VIEW name= dbo.tblCCInvoicesH
COLUMN ID= ConsumerID
COLUMN DATE= ReadingDate
Thank you in advance...
meti
Hi Guys,
I am using the query below to retrieve these results:
You can see that the results are repeated, once for DATIF = 1 and then again for DATIF = 2.
In this case does not matter if the results appear close to DATIF 1 or DATIF 2.
Take in care that I can not know how may extradates or Extrasums are attached to each Account.
Is there any way to avoid these repeated rows?
Thanks in advance,
Aldo.
ACCOUNTKEY DATFID DATFNAME DATF SUFID SUFNAME SUF
--------------- ----------- -------------------------------------------------- ----------------------- ----------- -------------------------------------------------- ----------------------
123456 1 ExtraDates01 2005-01-01 00:00:00.000 1 ExtraSum01 4
123456 1 ExtraDates01 2005-01-01 00:00:00.000 2 ExtraSum02 3
123456 1 ExtraDates01 2005-01-01 00:00:00.000 3 ExtraSum03 1
123456 1 ExtraDates01 2005-01-01 00:00:00.000 4 ExtraSum04 2
123456 2 ExtraDates02 2004-01-01 00:00:00.000 1 ExtraSum01 4
123456 2 ExtraDates02 2004-01-01 00:00:00.000 2 ExtraSum02 3
123456 2 ExtraDates02 2004-01-01 00:00:00.000 3 ExtraSum03 1
123456 2 ExtraDates02 2004-01-01 00:00:00.000 4 ExtraSum04 2
Code Snippet
SELECT DISTINCT
Accounts.ACCOUNTKEY,
ExtraDates.DATFID,
ExtraDateNames.DATFNAME ,
ExtraDates.DATF ,
ExtraSums.SUFID ,
ExtraSumNames.SUFNAME ,
ExtraSums.SUF
FROM
EXTRADATES AS ExtraDates
LEFT OUTER JOIN EXTRADATENAMES AS ExtraDateNames ON ExtraDates.DATFID = ExtraDateNames.DATFID
RIGHT OUTER JOIN ACCOUNTS AS Accounts ON ExtraDates.KEF = Accounts.ACCOUNTKEY
LEFT OUTER JOIN EXTRASUMS AS ExtraSums
LEFT OUTER JOIN EXTRASUMNAMES AS ExtraSumNames ON ExtraSums.SUFID = ExtraSumNames.SUFID ON Accounts.ACCOUNTKEY = ExtraSums.KEF
LEFT OUTER JOIN EXTRANOTENAMES
RIGHT OUTER JOIN EXTRANOTES ON EXTRANOTENAMES.NOTEID = EXTRANOTES.NOTEID ON Accounts.ACCOUNTKEY = EXTRANOTES.KEF
WHERE
Accounts.SORTGROUP BETWEEN 0 AND 999999999
AND Accounts.ACCOUNTKEY BETWEEN '123456' AND '123456'
I have problem, i wanted a query which will search the duplicate and then give suggestionmost repeated word
Table containing the records like below
ID
Movie Name
New Name
1
Spider Man
Spider Man
2
Spider Man 2
Spider Man
3
Spider Man 3
Spider Man
4
Spider Man UK
Spider Man
5
Spider Man USA
Spider Man
6
New Spider Man
Spider Man
7
Spider Man Black
Spider Man
8
Spider Man Part 1
Spider Man
9
Spider Man Part 2
Spider Man
10
Spider Man I
Spider Man
11
Spider Man III
Spider Man
12
Spider Man Part II
Spider Man
My manufacturer send me the data in this format and i have to allocate there new name
to do some comparison
I wanted to make this process automatic.
what i mean is i need a query which will give me a repeated records along with suggestion
as new name.
I am fully confident that you guys will help me out from this problem.
Looking forward
If I have a student table with 3 columns ID, FirstName and LastName
ID- FirstName -LastName
-------------------------
1 Tom Hanks
2 Jerry Thomas
and I have a subject table with two columns StudentID and Subject. StudentID is a foreign key to the student table.
StudentID - Subject
------------------------
1 History
1 Biology
2 History
If my query is
select distinct student.id, student.fname, student.lname, student.subject from student
left outer join subject on student.id = subject.studentid
then I get
1 Tom Hanks History
1 Tom Hanks Biology.
Is there a way I could get
1 Tom Hanks History
null null null Biology
--> meaning I don't want to repeat data??
thanks
Teena
Hi there :)
I am developing a system for my uni course and I am stuck a little problem...
Basically its all about lecturers, students modules etc - A student has many modules, a module has manu students, a lecturer has many modules and a module has many lecturers.
I am trying to get a list of lecturers that run modules associated with a particular student. I am able to get a list of the appropriate lecturers, but some lecturers are repeated because they teach more than one module that the student is associated with.
How can I stop the repeats?
Heres my sql select code in my cs file:
string sqlDisplayLec = "SELECT * FROM student_module sm, lecturer_module lm, users u WHERE sm.user_id=" + myUserid + "" + " AND lm.module_id = sm.module_id " + " AND u.user_id = lm.user_id ";
SqlCommand sqlc2 = new SqlCommand(sqlDisplayLec,sqlConnection);
sqlConnection.Open();
lecturersDG.DataSource = sqlc2.ExecuteReader(CommandBehavior.CloseConnection);
lecturersDG.DataBind();
And here is a pic of my Data Model:
Data Model Screenshot
Any ideas? Many thanks :) !
Hi,
i have a matrix with some fixed columns. when the fixed columns have repeated data, the repeated data is hidden.
how do you show the data all the time??
eg. i have:
Customer - Month - bikes - balls - toys - Total
Sam - January - 0 - 4 - 10 - 14
- February - 3 - 2 - 8 - 13
- March - 2 - 0 - 9 - 11
Tom - January - 2 - 5 - 2 - 9
- February - 5 - 2 - 8 - 15
- March - 1 - 6 - 3 - 10
but i want it to show like this:
Customer - Month - bikes - balls - toys - Total
Sam - January - 0 - 4 - 10 - 14
Sam - February - 3 - 2 - 8 - 13
Sam - March - 2 - 0 - 9 - 11
Tom - January - 2 - 5 - 2 - 9
Tom - February - 5 - 2 - 8 - 15
Tom - March - 1 - 6 - 3 - 10
Thanks.
What I need to know is how to get repeated data from a existing table, to normalized tables with out typing it...
Example:
---------------------
| ID |TEXT | TAGS |
---------------------
| 1 |text1|repeating|
| 2 |text2|repeating|
----------------------
How to normalization would be use 3 tables ,one for tags_id and tags, and another relating the tags_id to ID from the table above...but how does the code already know there is a tag called repeating?
Hi All, Would appreciate some assistance with the attached, I'm using some fairly complicated recordsets (ASP VBScript) for a property search website, I have a page where a user selects search by County this in turn takes them to a page which lists all the towns in the county and number of live properties in each, I'm using 4 recordsets for this - 3 of which list the towns (townsA2I, townsJ2R & townsS2Z) the 4th is a Property Count, examples of the recordsets are below (using townsAtoI and LiveProperties -
TownsA2I
<%
Dim TownA2I
Dim TownA2I_numRows
Set TownA2I = Server.CreateObject("ADODB.Recordset")
TownA2I.ActiveConnection = MM_recruta2_STRING
TownA2I.Source = "SELECT towncountyID, Town, County FROM dbo.easytolettowncounty WHERE Town LIKE 'A%' AND County = '" + Replace(TownA2I__MMColParam, "'", "''") + "' OR Town LIKE 'B%' AND County = '" + Replace(TownA2I__MMColParam1, "'", "''") + "' OR Town LIKE 'C%' AND County = '" + Replace(TownA2I__MMColParam2, "'", "''") + "' OR Town LIKE 'D%' AND County = '" + Replace(TownA2I__MMColParam3, "'", "''") + "' OR Town LIKE 'E%' AND County = '" + Replace(TownA2I__MMColParam4, "'", "''") + "' OR Town LIKE 'F%' AND County = '" + Replace(TownA2I__MMColParam5, "'", "''") + "' OR Town LIKE 'G%' AND County = '" + Replace(TownA2I__MMColParam6, "'", "''") + "' OR Town LIKE 'H%' AND County = '" + Replace(TownA2I__MMColParam7, "'", "''") + "' OR Town LIKE 'I%' AND County = '" + Replace(TownA2I__MMColParam8, "'", "''") + "' ORDER BY Town ASC"
TownA2I.CursorType = 0
TownA2I.CursorLocation = 2
TownA2I.LockType = 1
TownA2I.Open()
TownA2I_numRows = 0
%>
LiveProperties
<%
Dim LiveProperties
Dim LiveProperties_numRows
Sub sLivePropertyCount(vLocation)
vCount=0
Set LiveProperties = Server.CreateObject("ADODB.Recordset")
LiveProperties.ActiveConnection = MM_recruta2_STRING
LiveProperties.Source = "SELECT COUNT(PropertyID) As NumberofProperties, propertylive, propertylocation FROM dbo.easytoletproperty WHERE propertylive = 'y' AND propertylocation = " & vLocation & " GROUP BY propertylocation, propertylive"
LiveProperties.CursorType = 0
LiveProperties.CursorLocation = 2
LiveProperties.LockType = 1
LiveProperties.Open()
vCount=(LiveProperties("NumberofProperties"))
Response.write(vCount)
LiveProperties.Close()
Set LiveProperties = Nothing
end sub
LiveProperties_numRows = 0
%>
I've tried following the tutorial here http://www.webthang.co.uk/tuts/tuts_dmx/rob9/rob9.asp but when i review the page i get the following error -
"Microsoft OLE DB Provider for SQL Server error '80040e14'
Invalid column name 'Barnet'.
/PropertiesbyTown1.asp, line 338 "
Where line 338"
Where line 338 is the "LiveProperties.Open()" of the above recordset, when i try to view bindings on this recordset Dreamweaver gives me the following errors -
"Column 'dbo.easytoletproperty.propertylive' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause.
Column 'dbo.easytoletproperty.propertylocation' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause."
I would appreciate any assistance -
It seems that there should be a solution for my situation, but for the life of me I can't seem to figure it out.
I need to compare two "like" tables, containing similar data. Tbl 1 is "BOOKED" (which is a snapshot of inventory) and tbl 2 is "CURRENT" (the live - working inventory table). If I write my query as follows the the subsequent result is "duplicate" data.
Code Block
SELECT booked.item, booked.bin, booked.quantity, current.bin, current.quantity
FROM BOOKED
LEFT JOIN
CURRENT
ON booked.item = current.item
No matter what type of join I use, there is duplicate data displayed for each table. For example, if there are more bins in the BOOKED table that contain a certain product then the CURRENT table will repeat data and vica versa.
As follows:
Item
Bin
Quantity
Bin
Quantity
12345
A01
500
A01
7680
12345
B01
6
A01
7680
12345
C01
20
A01
7680
54321
G10
1032
E15
1163
54321
G10
1032
F20
523
54321
G10
1032
H30
750
98765
Z20
7000
Z20
8500
98765
Y15
2500
Y15
3000
98765
X10
1200
Y15
3000
What I would like to do is display Bin and Quantity only once and the repeating values as NULL or [BLANK]. Or, to display all of the bins from both tables and only the quantities from each table in relation to the bin found in that table, returning a "0" if no quantity exists.
This is what I'm after:
Item
Bin
Quantity
Bin
Quantity
12345
A01
500
A01
7680
12345
B01
6
B01
0
12345
C01
20
C01
0
54321
G10
1032
E15
1163
54321
F20
0
F20
523
54321
H30
0
H30
750
98765
Z20
7000
Z20
8500
98765
Y15
2500
Y15
3000
98765
X10
1200
X10
0
Is this possible? If so, how?
I also might add that it is ok for each table to contain multiple entries for any given item. This is basically being requested as an inventory variance report - inventory before physical count and immediatly after physical count - and will only be run once a year.
-----------------------------------------------
Just thinking out loud here:
What if I created three subqueries, the first containing only BOOKED information, the second containing only CURRENT information and the third being a UNION of both tables? Something like this:
Code Block
SELECT q3.bin, q1.item, ISNULL(q1.quantity, 0) as QTY_BEFORE, ISNULL(q2.quantity, 0) as QTY_AFTER
FROM
(select item, bin, quantity
from BOOKED)q1
Left Join
(select item, bin, quantity
from CURRENT)q2
on q1.item = q2.item
Left Join
(select bin, item
from BOOKED
UNION
CURRENT)q3
on q1.item = q3.item
Order By q1.item
I don't know if I wrote the UNION statement correctly, but I will have to try this when I get back to work...
Any suggestions?
Hi,
I have a common requirement in numerous SSIS processes to take my main input data set and to remove all rows from it that match a second input data set on a given key and output this as the main output. I also want to output (as a second output) all the rows from the main input data set that did match on the given key. However, I don't want to merge in data from the second input, nor am I interested in rows from the second input data set that have no match in the main input.
E.g. If I have the following data:
Main input:
Key Name
--- ----
1 Steve
2 Jamie
3 Donald
Second Input
Key DontCareAboutThisField1
--- -----------------------
1 ...
3 ...
4 ...
Then I would like the following output:
Main Output
Key Name
--- ----
2 Jamie
Second Output
Key Name
--- ----
1 Steve
3 Donald
Can I do this with a standard transform, or will I have to write my own? Any help on this would be greatly appreciated!
Thanks in advance,
Lawrie
Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
Environment:
Running this code on my PC via VS 2005
.Net version 2.0.50727 on the server (shown in IIS)
Code is in ASP.NET 2.0 and is a VB.NET Console application
SSIS 2005
Problem & Info:
I am bringing in an Excel file. I need to first strip out any non-detail rows such as the breaks you see with totals and what not. I should in the end have only detail rows left before I start moving them into my SQL Table. I'm not sure how to first strip this information out in SSIS specfically how down to the right component and how to actually code the component to do this based on my Excel file here: http://www.webfound.net/excelfile.xls
Then, I assume I just use a Flat File Source coponent or something to actually take the columns in the Excel and split into an OLE DB Datasource to shove each column into a corresponding column in my SQL Server Table. I have used a Flat File Source in the past to do so with a comma delimited txt file but never tried with an Excel.
Desired Help:
How to perform
1) stripping out all undesired rows
2) importing each column into sql table
I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.
I am loading data from .csv file to OLE DB Destination.
This data flow task is placed inside For each loop container.
is this issue because of any performance issue in SSIS packages such as buffer size.
find the error below:
DFT Load Data from FlatFile:Error: The conditional operation failed.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.
The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[code]....
Why this SQL procedure gives contiguous repeated records ( 3 or 4 times ) ?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ALTER PROCEDURE GetProductsOnPromotInDep
(@DepartmentID INT)
AS
SELECT Product.ProductID, Title
FROM Product INNER JOIN
(ProductCategory INNER JOIN
(Category INNER JOIN Department ON Department.DepartmentID = Category.DepartmentID)
ON ProductCategory.CategoryID = Category.CategoryID)
ON Product.ProductID = ProductCategory.ProductID
WHERE Category.DepartmentID = @DepartmentID
AND ProductCategory.CategoryID = Category.CategoryID
AND Product.ProductID = ProductCategory.ProductID
AND Product.OnPromotion = 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
How can find out the repeated character in each row value of spacific column
View 1 Replies View Relatedfinding the solution for the below query?It displays repeated records.
select distinct ku.username,rro.role_name,rp.resource_type_code,kr.region_name,kc.currency_name,
fcr.cost_rule_id RULE,fcr.rate current_rate,pp.project_name,kou.org_unit_name ORG_UNIT
from
[code]....
Hi
I have created a Percent Log Used Alert with a threshold of 85% and am getting e-mailed with Database Mail, the problem is that I continue to get e-mailed repeatedly with the same e-mail until I disable the Alert. Is there any way to have it just e-mail it once?
Thanks
Pam
This is a problem I usually solve with procedural code, but I am wondering how/if it could be done with SQL queries.
A simple one to many query like:
Select inv.invnbr, inv.freight, invline.quantity, invline.partnbr, invline.cost from inv inner join invline on inv.id = invline.InvID
Returns something like:
invnbr freight quantity partnbr cost
100 50 3 abc 50
100 50 6 def 65
100 50 10 ghi 70
Is there way I can rewrite the query, or add a subquery such that the result set would be:
invnbr freight quantity partnbr cost
100 50 3 abc 50
100 0 6 def 65
100 0 10 ghi 70
Eg, the freight value, which comes from the one/header table, would show up in only one of the lines for invnbr 100?
Many thanks
Mike Thomas
The scenario is as follows:
I have rows coming from the db including:
Contract Number, Contract Name, owner and Actions associated with each contract.
SQL statement brings back:
Contract Number Contract Name Sales Owner Action
1234 123453 $50 Neil x
1234 123453 $50 Bob y
534232 5464634211 $30 Harry z
The problem is that each contract can have multiple actions associated with it...
There ideal output would be:
Contract Number Contract Name Sales Owner Action
1234 123453 $50 Neil x
Bob y
534232 5464634211 $30 Harry z
Total: $80
Basically I need to hide and not include repeated items based on a contract number... one idea I had was creating a group based on contract number and then display info in the header and then only owner and actions in the detail section.. The problem is Totals... how can I can it to avoid count the duplicated values..
Any help would be greatly appreciated.
Thanks,
Neil
In the web site that I am building ( in C# language ), a hypothetic customer who would buy something would be redirected to a Secure payments company where he would make the payment and then the company would send back to my web site, information about this transaction.
My program would then save this info in a Microsoft SQL database. The problem is that this company uses to send the same info several times repeatedly and I do not want to store the same info more than once.
So I want a SQL procedure where it takes the invoice number of the customer ( contained in its string of info ) and looks inside a table to see if it was already stored there. If it is there ( or not ), it would return a value, which could be false/true or 0/1 so my program could use this value to save a new info or not and then activate ( or not ) some related tasks.
I am still learning SQL and I tried the below procedure but it is not working. Which alternative procedure could solve the problem ?
~~~~~~~~~~~~~~~~~~~~~~~~~
CREATE PROCEDURE VerifyIfInvoiceExists
(@Invoice VARCHAR(50))
AS
SELECT COUNT(*) FROM IPN_received
WHERE Invoice = @Invoice
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I'm using the following query to look in a log file and show somestatistics. It counts the total number of views and the total numberof unique users who have viewed a particular item (the "id" and"title" fields are associated with the item).SELECT title, COUNT(id) AS NumberViews, COUNT(DISTINCT UID) ASNumberUniqueUsers, Type, idFROM ActivityLogWHERE dtTime >= 'Nov 1 2004 12:00AM' AND DtTime <= 'Nov 1 200512:00AM'GROUP BY Title, Type, hdnIdORDER BY TopViewed descThis works fine on SQL Server 2000 (our development machine), but onSQL Server 7 (our production machine), the title column has the samevalue for every row. The other columns show the correct values.If I remove the "ORDER BY" clause, then it works fine. If I removethe "COUNT(DISTINCT UID)" column, it works fine. If I totally removethe WHERE clause, it works fine.Any ideas? It seems like a bug since it works fine on sql2k. I'vetried adding OPTION (MAXDOP 1) to the end of the query, but thatdidn't help.We're using SQL Server 7.0 sp1, and my boss doesn't want to riskupgrading to sp4 because it might screw up all of our otherapplications. I looked through all of the sp2 through sp4 bug fixes,and I didn't see anything specifically mentioning this.Thanks.
View 2 Replies View RelatedI have hundreds of these errors saying 'Login failed for user 'Reporting' The user is not associated with a trusted SQL Server connection [CLIENT: ip address]
The ip address is that of the server that sql server is installed on.
Looking in my log file, all looks good until I get to Service Broker manager has started, then I get Error: 18452, Severity: 14 State: 1 then these two lines repeat about every minute, for the last 3 days!
I think I must have just missed a tick box somewhere, but where?
I have been into one of the databases, and input and checked data, both via an application I wrote and SQL Server Management Studio.
I am also having trouble connecting using my application to connect to the database, I can only connect if I use a Windows administrator account (this SQL Server 2005 running on a Windows 2003 Server, with the app on PC running Windows 2000)
Hi guys,
I have a matrix report with one row group and one dynamic column group. My issue is that I want to see the column group to be appeared only on the first page of the report not on every next page, because I am going to finally export the report to Excel spreedsheet so I don't want the column to be repeated in the middle of the records.
Let me know if anybody has some idea.
Thanks!
--Amde
Hi:
I am fairly new to SQL Server 2005 and before now, I have only had to restore databases, and connect to tables via ODBC connection in a reference (read only) setup. Today, I have a very small project to set up using the server.
I have a userlogon.csv file that the network stores on a file server in a hidden share logon$. It has 4 columns, UserID, Computer, Date, Time.
I was able to create a database called UserLogon and import the file as it was today. I want to create a scheduled update so the server would go to this file perhaps 4 times a day (or more) and grab any new logins that have appended itself to this CSV file.
So, as a newbie with a 1,900 page SQL Server 2005 unleashed manual at my side, could someone outline what the steps are in general I should follow to set this up?
I have the process laid out in my mind, but I don't know how to translate in into a scheduled task of the SQL Server :
1. Create DB and import the table (done)
2. create a stored procedure that connects to the CSV file and evaluates date and time stamps then appends any new records into the SQL db table. (appending records would be achieved by using the INSERT and WHERE statements?)
3. Schedule a job to perform this task on a routine basis.
It appears that the file connection portion of this set up is defined outside the evaluation and append record procedure? (not in the same stored procedure). Perhaps I tie the whole process together using the Job Manager, selecting the file settings, and then the stored procedure to be performed on the file.?
I hope I have been descriptive enough to ask if someone could outline the modules/features/processes involved so I can read up on them and figure them out using the book.
Thank you in advance.
David
i have telephone numbers in my table and i want to select based on numbe of repeated numbers.. for example..
39657777
39111132
36399991
The first has foue 7s, second has four 1s and the thrid has four 9s.
If I have this table
Mytable
IdnCol ColumnA ColumnB ColumnC ColumnD
1 CC DD EE FF
2 DD GG HH JJ
3 HH JJ KK HH
How I can check for the repeated value in the column.
for example in the 3rd record, in columnA and ColumnD the value HH is repeated
so is there a way to find if there are values repeated in any of the columnA ColumnB ColumnC ColumnD.
Thanks
Hi
Ihave a table With A Culomn That Is NOT Unique And Repeat Many Tims BUT I want To Have a Select Command That Filter Repeated Value And Show Only One of rows Whith Same Data
Thank u
In the web site that I am building ( in C# language ), a hypothetic customer who would buy something would then be redirected to a Secure payments company where he would make the payment and then the company would send back to my web site, information about this transaction.
My program would then save this info in a Microsoft SQL database. The problem is that this company uses to send the same info several times repeatedly and I do not want to store the same info more than once.
So I want a SQL procedure where it takes the invoice number of the customer ( contained in its string of info ) and looks inside a table to see if it was already stored there. If it is there ( or not ), it would return a value, which could be false/true or 0/1 so my program could use this value to save a new info or not and then activate ( or not ) some related tasks.
I am still learning SQL and I tried the below procedure but it is not working. Which alternative procedure could solve the problem ?
~~~~~~~~~~~~~~~~~~~~~~~~~
CREATE PROCEDURE VerifyIfInvoiceExists
(@Invoice VARCHAR(50))
AS
SELECT COUNT(*) FROM IPN_received
WHERE Invoice = @Invoice
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I'm trying to come up with a query for this data:
CREATE TABLE #Visits (OpportunityID int, ActivityID int, FirstVisit date, ScheduledEnd datetime, isFirstVisit bit, isRepeatVisit bit)
INSERT #Visits (OpportunityID, ActivityID, FirstVisit, ScheduledEnd)
SELECT 1, 1001, '2014-08-17', '2014-08-17 12:00:00.000' UNION ALL
SELECT 1, 1002, '2014-08-17', '2014-08-17 17:04:13.000' UNION ALL
SELECT 2, 1003, '2014-08-18', '2014-08-18 20:39:56.000' UNION ALL
[Code] ....
Here are the expected results:
OpportunityIDActivityIDFirstVisitScheduledEndisFirstVisitisRepeatVisit
110012014-08-172014-08-17 12:00:00.00010
110022014-08-172014-08-17 17:04:13.00001
210032014-08-182014-08-18 20:39:56.00001
210042014-08-182014-08-18 18:00:00.00010
[Code] ....
Basically I'd like to mark the first Activity for each OpportunityID as a First Visit if its ScheduledEnd falls on the same day as the FirstVisit, and otherwise mark it as a Repeat Visit.
I have this so far, but it doesn't pick up on that the ScheduledEnd needs to be on the same day as the FirstVisit date to count as a first visit:
SELECT*,
CASE MIN(ScheduledEnd) OVER (PARTITION BY FirstVisit)
WHEN ScheduledEnd THEN 1
ELSE 0
END AS isFirstVisit,
CASE MIN(ScheduledEnd) OVER (PARTITION BY FirstVisit)
WHEN ScheduledEnd THEN 0
ELSE 1
END AS isRepeatVisit
FROM#Visits
I have one table having three columns.This table contains lot of repeated records. I want to delete this records .
In this below example i want to delete all the records which columns id and no columns contains same values.
id no sequence
------------------------------------
35 35432 1
35 35432 2
35 35432 3
36 35432 1
35 45623 1
First three records the columns id and no contains same value. I want to delete this three records.
But in last record for id =35 and no column =45623.it is not repeated so it should not be deleted.
I have one table
Customer ID; Sort of Transactions;Value
1234;Kit;1
1235;Kit;1
1236;Revenue;30
1235;Kit;2
1238;Revenue;10
1235 ;Kit;1
Looking for a formula for calculated column, which gives me sum of "Kit" for Customers
1234;Kit;1;1
1235;Kit;1;4
1236;Revenue;30;0
1235;Kit;2;4
1238;Revenue;10;0
1235 ;Kit;1;4