I tried to load a fixed width flat file with around 300,000 rows. However, only the first 8xxxx rows were loaded to the destineation table and the rest row were loading blank records. There was no error message showing during package execution. I've tried to split the file in half and the result was the same. So it wasn't the data file problem.
Would there be any buffering issue I need to cater for inside the package? Thanks!
I want to use DTS to load from a flat file. But I can't be sure whenthe flat file will arrive. I would like the job to check every 10minutes or so for a couple of hours. If the file is present, then loadthe file and rename it so that it doesn't get overwritten. Anysuggestions?TIA,amorphous999
View 3 Replies View RelatedI have some duplicate records in my flat file. But i don't want to load those duplicate rows into my destination.
View 2 Replies View Related
While loading the flat file into sql server2005 using SSIS , i am getting error like:
[Source - 20070801PensionPayments_dat [1]] Error: The "output column "Status" (246)" failed because truncation occurred, and the truncation
row disposition on "output column "Status" (246)" specifies failure on truncation. A truncation error occurred on the specified object of
the specified component.
In the EM import wizard, i can see last column [][](blank space similar box type). because of that i unable to load data into table. The delimiter is fixed width.
Please help me - Thanks in Advance.
I have number of csv files in a folder, all of them with same columns, need to be merged into one table and imported to sql server.
-The first row of the csv file is a header.
-The csv files are updated everyday
-The destination table is replace by new table with new info in the csv.
-The new csv files can be created and old csv files may no longer exist, but we are only interested in information contain in current csv files in the folder.
-I need SSIS to combine all the csv files in the folder and merge into one table.
-Other issue is that the field names may change in csv, so can the SSIS package recognize the change in field name and made necessary change in destination table as well.
Any insight on this issues will be greatly appreciated?
Here's what I want to do -
Dynamically load a flat file from a dynamic source table-
The source table metadata is known via the SYSOBJECTS and SYSCOLUMNS tables- I can pull the column names, type and lengths from these tables based on the table name. (my goal is pretty simple- pull data from a table in our database, and save it down to a flat file)
Would this be enough to dynamically create the destination flat file? If so, how do I do it?
Thanks
-rob
I have a text file that loads just fine with DTS 2000, but in SSIS it does not seems to recognize the row delimiter. For example, most rows in the text file have 10 columns, but some have 8 columns. For those with 8 columns, the SSIS is adding the data from next row, not padding the columns with nulls. Please help...
Thanks in advance.
Designing a solution for loading data into SQL destination from a single 5/10 GB flat file? If yes, what kind of performance measures you have taken while designing the solution ?
View 3 Replies View Related
Iam trying to load a RR Flat File(Ragged Right) into SQL Server DB Destination.
The file feeds the data into two tables and the logic looks like this..
If Position 30 = ''
Record Set goes into Table 1
Else
Record Set goes into Table 2
I have no clue where to start with my limited SSIS Exposure.. Any Ideas as to what i shud be starting with (Transformations)??
Thanks in Advance.
Hi All,
I am using sql server 2005. I stuck out in a strange problem.
I am using view in my stored procedure, when I run the stored procedure some of the rows get skipped out means if select query have to return 10 rows then it is returning 5 rows or any other but not all, also the records displyaing is randomly coming, some time it is displaying reords 12345 next time 5678, other time 2468.
But if I run seperately the querys written in SP then it returns all the rows. Please give me solution why it is happening like this.
There are indexes in the tables.
Once I shrink the database and rebuild the indexes, from then this problem is happening. I have rebuild the indexes several time, also updated the statistics but nothing improving.
But nothing is improving
It seems I can do the type conversion in two place:
1. The advanced editor for flat file source => Input and output roperties. And I can set the output columns data type properties there.
2. Using a Data conversion box in Data flow transformation.
Any difference between these two? Which one should be used?
I have the misfortune of converting a DTS package to SSIS that loads a flat file that has a text fields that can contain embedded text delimiters ("), column delimiters (,) and even new lines (CR+LF i.e.,hex 0D 0A) in it. A sample line from the file is posted here, remember this is just one line though it shows as three lines, since the third field has embedded new line in it:
4,"Sam","EVP; MARKETING PRODUCT MANAGER ""Level I"",
Internet Sales / HELP
8005551212",100
If you open in excel it handles it perfectly showing four fields, as below, and this is what I want ( I cannot get it aligned right in the posting, just save the above line in *.csv and open to see what it should be):
4 Sam "EVP; MARKETING PRODUCT MANAGER ""Level I"", 100
Internet Sales / HELP
8005551212"
Now, SSIS errors on the embedded text delimiters and breaks into two or three lines based on which option I chose. I have tried few options based on postings in the forum:
a). Using undouble and undoubleout: Does not work when there are embedded column delimiters (,) in the text field
b). Modified undouble script posted by lvovg at http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1718225&SiteID=1. Handles the embedded column delimiters (,) perfectly, but the embedded new lines (CR+LF i.e.,hex 0D 0A) are breaking it.
Since, I am using the ragged right format to read from the file then use transform script on the line by lvovg, the line is already broken by the ragged right format at the embedded new lines, hence does not work.
Right now I am stuck. Can someone please help (anyone from MS) ? I am already baffled at the amount of coding required to convert a very basic ( and working ) flat file load DTS package to SSIS. I am willing to persist bit longer to convert this to SSIS, before I give up and stick with DTS and wait for a fix / workaround.
Thanks.
Hey Everyone,
I have a Data-Flow task embedded in a Sequence Container (does not fail component on error) on the Control Flow panel of the SSIS designer. This data flow task contains a connection to a Flat File Source -> A Data Transformation -> Into an OLE Db Destination.
The problem is that the Flat File isn't always delimited properly -> the client cannot be relied on to do this.
My question is when the delimiters are messed up, how can I capture the offending error row(s) from the Flat File Source?
What I've tried:
1) Set every column in the source flat file on error to: Redirect Row
2) Added a Script Transformation to pull the description and the record id out of the offending row
3) Added an Error file flat file destination to the end of the flow.
The package always fails on the Flat File Source and never Redirects the offending Row to the error output - I never see my onError Script Transformation go Green, Red, or Yellow - SSIS doesn't let it get there.
I'm really new to SSIS so sorry if this is a super basic question.
Here is the Error Text:
[Source - InventTable_csv [1]] Error: The column delimiter for column "RECID" was not found.
[Source - InventTable_csv [1]] Error: An error occurred while processing file "C:------InventTable.csv" on data row 15228.
[DTS.Pipeline] Error: The PrimeOutput method on component "Source - InventTable_csv" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I do have the MaxErrorCount set to 1 on the Data Flow Task but still think I should see my script task execute and a log entry be generated.
Any Ideas?
Matt
Hi!
I have a problem that I canīt understand.
I have rows in a table in a SQL Server 2005 that I want to send to a Flat file. When I am executing the task for the first time it is OK and works perfectly. But the problem is when I am trying to do it again. I seems like the path to the file and the filename dissappears after the first time and the execution failes with an error message that tells me that the file is invalid and donīt exists.
I donīt now why this is happening and itīs such an easy thing to do and I canīt make it work.
So please help me!
Regards,
Johanna
I have a text file that come from our client that is Column deliminated by ~ and row deliminated by {CR}{LF}.
There is a comment field that appearently is not cleaned up and has {CR}{LF} within the comment field.
I am new to SSIS and I'm wondering if there is a way to detect and correct the bad rows?
example file formet:
ORDERID~DATE~Comment~Address
1~2/3/2007~Some Comment~1234 oak st
2~2/3/2007~Some messed
up comment~345 oak st.
3~2/3/2007~Another comment~3214 asdf blvd.
Thank you.
In the FLAT FILE source, I have to find the duplicate rows based on the two fields say, "bill number" & "invoice date".
The rows within flat file has like "bill number" which is duplicated on the same "invoice date".
If duplicate rows found then move the duplicate rows into another Flat File.
If not found then move the rows into Sql Server Table.
Pls provide the solution. Thank you
Hi,
I noticed something strange today. I created a pkg that reads a flat file and writes the rows to a table.
In checking the data in the file against what's in the table, I noticed that the rows were inserted in a different order than they are in the file.
All the rows appear to be in the table correctly, but they're just not in the same order as in the file. I've never seen this before. But I checked very carefully, and this is indeed the case.
Is this normal??
Thanks
Hello,
Is there a way (perhaps a property) to capture the number of rows selected from a Flat File Data Flow Source without having to develop a script to loop through the rows and count them?
Thanks a lot,
Grace
Hi,
In a dataflow there is a Flat File Source that loads a file with 500000 rows but when I execute the package it only loads 249999, I have verified the file and every looks fine, it is a csv and ms-excel recognized it perfectly.
I'm wondering if there is any technical limitation regarding to the amount of rows per file?
and what else can I verify for discover the problem?
thanks
hi
I have a flat file as below
Date 20070606
Empid Salary X1 x2 x3 x4 x5
100 10000 .............................
where 10000 is the salary got on date 20070606 by empid 100
.x1,x2,x3...are the remaining columns in the file.I need to extract the date and also continue reading the remaining data.How can i do this???
Any help?
thanks
ami
I finally put together a SSIS package that takes a Text File and successfully imports its data into the right table. My question is, where in the package's properties can I find the option to Delete all rows from Destination Columns prior to Importing. I have looked everywhere in the Package Explorer for this setting. Thanx in advance.
View 3 Replies View RelatedHello,
Using ssis, how can I limit the number of rows I wish to import from a flat file?
thanks in advance
I got a flat file like:Â
Location CurrencyRates
ALBERTA #15U.S.$ 0.2930 1 Can$ 0.0900
BRITISH COLUMBIA #14U.S.$ 0.6891 2 Can$ 0.2117
MANITOBA #18U.S.$ 0.4557 3 Can$ 0.1400
If there a way I can use SSIS to transfer this file to something like:
locationUSDUSDrateflagCADCADrateALBERTA #15U.S.$ 0.29301Can$ 0.0900BRITISH COLUMBIA #14U.S.$ 0.68912Can$ 0.0900MANITOBA #18U.S.$ 0.45573 Can$ 0.1400
Sorry if this question had already been answered previously. I was unable search the forum on this topic. How will I merge these and then configure the first row as Column names (As this helps to map to the destination column names automatically)
Hi,
I have a data task with the following requirements:
1) Run query against database to retrieve rows
2) Add header and footer row to the result set. The footer row must contain a count of the records.
3) Write the rows to a fixed width file if there were any data rows
I have got to the point that I can create the file (using a set of tasks that includes derived columns, sorts, aggregation and merges). However the file is created regardless of whether there were data rows returned.
I can't check the row count before proceeding as this isn't set until the data task ends. And if I try to split them into separate data tasks (so that I can access this variable and perform conditional execution) it becomes harder to access the original rows.
Do you have any recommendations on the best way to achieve this?
It all seems to be very complex and I'm starting to feel that it would be easier to do this outside of SSIS...
Please help me to keep the faith!
For those interested this is a slightly simplified version of what I have so far (all within a single data task):
1.Run dummy sql to create header row 2.Run main SQL to retrieve rows
| |
| 3.Multicast
| | |
| | 4.Create footer row by doing sum() in aggregate task
| | |
| 5.Merge body and footer
| |
6. Merge header with body and footer
|
7. Create fixed width file
Just attempting to import a simple tab delimited text file into my SQL Server 2005 database using the SQL Server Import and Export wizard. Column names are specified within the first line of the file. The Header Rows to Skip field value is listed as 0, but the wizard indicates that "The field, Header rows to skip, does not contain a valid numeric value".
Why isn't zero (0) a valid numeric value? I don't want to skip any rows. PLUS, I get the same error when trying to export to a text file although the header rows to skip field does not exist. I can increase the number to 1 or more, but the wizard will skip part of my data .. unacceptable.
What am I missing here? I installed SP1 of SQL server 2005, but that did not help.
Thanks in advance.
All,
I'm having an issue with the Flat File Data Flow Source returning only a limited set of the rows that are in the flat file. Basically, I connect to the flat file fine, it goes to retrieve the data (tab delimited file) and only returns 190 of 392 rows. Is there a limitation on the # of rows this data flow source can retrieve or something? I've look all through the settings and properties of the task as well as the connection manager and nothing is obvious as to what is causing this. Hopefully someone ou tthere has run into this before and can help me retrieve all rows. Thanks in advance!
bakerz
Hi all
I have a flat file.I am trying to set the value for the property "HeaderRowsToSkip" during runtime.I have set an expression for this in my "flat file connection manager". But this is not working.The connection manager is not able to take the value during runtime.
My expression is as follows:
DataRowsToSkip : @[user:: Var]
where "Var" is my variable which gets the value from the rowcount component and trying to set it back to the "HeaderRowsToskip" property.
I ve even tried setting the value to the "HeaderRowsToSkip" property in the expression builder.
Its not working....
Can anyone help me out in solving this????
Thanks in advance
Regards
Suganya
Hi,
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
Did someone else faced this issue?
Thanks,
AQ
Hi,
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Any inputs will be appreciated.
M.Shah
Hi all,
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
thanx
I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.
I am loading data from .csv file to OLE DB Destination.
This data flow task is placed inside For each loop container.
is this issue because of any performance issue in SSIS packages such as buffer size.
find the error below:
DFT Load Data from FlatFile:Error: The conditional operation failed.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.Â
The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[code]....