Hi,
I have requirement where I need to show the table sizes of each table in database. For this, I have written a procedure that finds the sizes and loads into a table.
In my report, I should be able to run the procedure and select the rows from the table that I loaded the data into.
Is this possible to run the SP and then run query to get rows when a user clicks view report?
Has anyone developed a workaround to have SQL 6.5 and SQL 7.0 simultaneously active on the same NT 4.0 Server host. The use of VSWITCH.EXE to switch between SQL 6.5 and SQL 7.0 in not an acceptable solution. There are several applications that are only supported under SQL 6.5 and will not be upgraded to SQL 7.0 for another 3 to 6 months.
There are other applications (ERP and data mart) that were developed specifically for SQL 7.0 to take advantage of its new DTS, OLAP, and query capabilities.
All these applications need full-time access to their respective databases.
The obvious solution is to host SQL 6.5 and SQL 7.0 on separate servers. The client has a "monster" database server which would be too expensive to duplicate. Using a "standard" PC to host SQL 6.5 would significantly compromise performance of those applications.
Any advice or suggestions would be appreciated.
Andrew Dominguez, IMS
ajd@cwix.com
909.625.4066 / 7826 fax
Hi,I have managed to create a second copy of my "live" database, forsoftware testing purposes.Inspecting the properties of the new database, everything seems inorder. The logical file name is the same, which I believe is fine, andthe physical database (and log file name) is different.However, despite the fact that there is no application currentlyaccessing the "testing" copy, both databases are seemingly beingupdated simultanously. I can tell this from the physical file sizes onthe server, which are identical, and growing at the same rate.Does anyone have any suggestions why this might be happening - and howI can stop it?Thanks in anticipation!Phil
View 1 Replies View RelatedHi all,
I need SQL Server 2000 on the server, where SQL Server 2005 has been already installed. So I install SQL Server 2000 Instance as Named one. And everything is ok now when I connect locally from that server (SQL Server 2000 Instance is accessable both in SQL Server 2000 Enterprise Manager and SQL Server 2005 management Studio) and Default (SQL Server 2005 Instance) also works. But when I try to connect from SQL Server 2005 Management Studio (located on the other server) - only default instance is successfully connected, the named one - give an error:
TITLE: Connect to Server
------------------------------
Cannot connect to SERVERAMED_INSTANCE.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
so I think smth wrong with using ports simultaneuosly.
For SQL Server 2005 Remote Connections are allowed both for TCP/IP and Named Pipes.
Default TCP Port: 1433
In SQL Server 2000 I didn't find where to allow remote connections.
After insallation in Server Network Utility - default TCP port - 0, in Client Network Utility - 1433.
I have already tried to replace 0 with 1433 - nothing changes,
and use 1434 both in Server and Client Network Utility - nothing changes.
I need a remote connect to SQL Server 2000 Instance.
I hope the answer exists. Thanks to any ideas.
Dear All,
I am not an expert on T-SQL and I am trying out a small project to learn.
I
have encountered a problem, whereby I have 2 tables, 1 containing the
header (header_id, header_file, admin_menu_id and admin_submenu_id) and
then I have another table called header_details, where I am storing the
language details for this header, with the fields being
(header_details_id, fk_header_id, header_alt, header_caption and
fk_language_id)
Now I want to create a stored proc, first to
insert the header and then the header details. I also want that if the
header or header details already exist, I just do an update on these
tables.
I tried the following code but its not working:-
ALTER Procedure [dbo].[INSERT_Header]
(
@admin_menu_idint,
@admin_submenu_idint,
@header_filevarchar(150),
@header_altvarchar(150),
@header_captionvarchar(200),
@language_idint
@outIDint OUTPUT
)
AS
BEGIN
-- First do a select on the header table to see if this header already exists
DECLARE @count integer = 0
SELECT COUNT(*) as @count
FROM headers
WHERE[fk_admin_menu_id] = @admin_menu_id
AND[fk_admin_submenu_id] = @admin_submenu_id
--if it exists, then update this header
IF @count > 0
BEGIN
UPDATE [headers]
SET [header_file]= @header_file
WHERE [fk_admin_menu_id] = @admin_menu_id
[fk_admin_submenu_id] = @admin_submenu_id
ELSE
-- Insert header in header table --
BEGIN
INSERT INTO [headers]
([header_file]
,[fk_admin_menu_id]
,[fk_admin_submenu_id])
VALUES
(@header_file
,@admin_menu_id
,@admin_submenu_id)
-- Get the Inserted Header ID --
SET @outID = SCOPE_IDENTITY()
END
-- Now do a select on the header_details table to see if this header with this language already exists
DECLARE @count_details integer = 0
SELECT COUNT(*) as @count_details
FROM header_detail
WHERE[fk_admin_menu_id] = @admin_menu_id
AND[fk_admin_submenu_id] = @admin_submenu_id
AND[fk_language_id] = @language_id
--if it exists, then update this header
IF @count_details > 0
BEGIN
UPDATE [header_detail]
SET[header_alt]= @header_file
,[header_caption] = @header_caption
WHERE [fk_header_id] = @header_id
[fk_language_id] = @language_id
ELSE
-- Insert header in header table --
BEGIN
INSERT INTO [header_detail]
([fk_header_id]
,[header_alt]
,[header_caption]
,[fk_language_id])
VALUES
(@@out_ID
,@header_alt
,@header_caption
,@language_id)
END
END
Can you help me out please?
Thanks a lot for your help and time
Johann
Hi, can anyone help me with this? I need to write a proc to update all the tables in database with EmpNo where Employee is the master(Parent-table).
View 1 Replies View RelatedHello,
I have 2 tables EmployeeA(Eng) and EmployeeB(Spanish) kept in seperate mdb's. I want to add the records into Sql Server 2005 table called StateEmployee.
Procedure:
1. Loop through 2 folders..one containing table EmployeeA in mdb and other containing tbl EmployeeB in diff mdb's.
2. Pick a file from EmployeeA and EmployeeB, both at the same time.
3. Count the total no of rows in both files. If equal proceed.
4. Compare the 'employeeid' of one row of employeeA to the employeeid of EmployeeB.
5. If employee id matches, load both the rows in Sql server else file it to the error table.
6. Loop through all rows simultaneously till end of row.
7. Go to next mdb.
How do i go about this step by step. I am fairly new to SSIS.
I have seen information on the web about running two versions of SQL at the same time on the same server but was wondering any tricks of the trade regarding it. The main recommendation that I have seen is to have SQL 2000 SP4 running first as the default instance (which is my current situation on a development server) and then install SQL 2005 as a named instance on it. Should the SQL 2005 installation place its files in a dedicated directory (ie, C:SQL2005) as opposed to the default directory that the installation would normally write to, thus not overwriting any SQL 2000 system files? Any other recommendations?
View 1 Replies View RelatedHi,
I'm using ASP with a JScript variant and MSSQL Server 2000. I would like to write a script that basically erases all data except for a few things.
Is there a way to update multiple tables at once without having to write lines and lines of code? I tried UPDATE tbl1,tbl2 SET uid='asc', but to no avail. It gave me a syntax error. My thinking behind it is something like... UPDATE dbo.* SET uid='mferguson' and after that I can delete stuff like DELETE dbo.*... Any ideas?
I know the above is ASP, I've tried this thread in the ASP forum with no avail... they referred me to this forum.
Is it possible to restore two databases simultaneously in same sql instance?
View 3 Replies View RelatedIs there any problem with implementating some kind of replication andbacking up transaction logs at the same time? SQL Server 2000 StandardEditionThe server is configured to back up log files regularly, with thepresenceof a(New) Disaster recovery server and with an inability forstandby(Standard Edition)I am planning to implement some kind ofreplication hopefully still backing up the transaction logs to enablea point in time recovery.Thanks in advance for your great ideasVincento
View 1 Replies View RelatedHi!
Is it possible to have both servers installed and not having issues?
I am really new to this.
At my company we have both installed. At home I created a backup of a database in SQL Server 2005 but can not restore it here were we have both.
The message I got is: System.Data.SqlClient.SqlError: The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database.
So I think it seems that even though I'm trying to restore it in 2005 this version still uses the old server or something.
I hope I made it clear enough.
Please help.
Thanks.
We are currently using Crystal reports but are considering using SQL RS. We need to know if there is a restriction on simultanoeus access to the same report by multiple users? What happens when multiple users try to access the same report simultaneously? If reports can be accessed simultaneously, do the requests queue up or are they processed concurrently?
Any help on this issue is greatly appreciated.
I have two table both say A and B.If i insert a record in A that record should be inserted in B.If i delete a record in A that record should be deleted from B.Is that possible.If yes please tell me.Thankyou in advance,vishnu
View 3 Replies View RelatedAlright, here's the deal. I'm testing some backup/restore strategies, and hitting a (slight) sticking point.
We've got collections of database and log backups created by the usual maintenance plans on a 2000 Enterprise machine. I'm trying to run through a restore onto a new 2005 machine (Developer Edition on my test workstation) using the collection of .bak and .trn files copied from the 2000 server. When I try to restore to a new database on 2005 via SSMS, and select all the .bak and .trn files for the restore, I get the ol' "The volume on device '[trimmed]' is not part of a multiple family media set. BACKUP WITH FORMAT can be used to form a new media set." error.
I'm assuming this just means that SQL Server can't verify that these log backups are in fact part of a functional "set", even if they aren't part of a traditional backup media set. Is there any way to tell SSMS, "It's okay man, just restore the database from these files, in this order - trust me," or is the only solution restoring every individual log file one at a time? (Which seems to work fine, though is a tremendous pain with any more than a few log backups.) Seems like there ought to be a good one-shot method to restore a bunch of backups to a different server, and I'm just not finding it.
Hi,
I got on my developer computer one instance of msde 2000. I want to test sql server express 2005, can I install it without "scrap" my other instance of 2000?
Strange question maybee, but it's what I wanna do!
Thanks all!
I have a system of SSIS packages in which several packages perform the same lookup on the same table. E.g., i have PackageA, PackageB and PackageC all doing a lookup on TableA. All of these packages are spawned by the same PackageD and run frequently. In some cases, there is an issue with concurrency on these lookups. I get the following exception :
"
The ProcessInput method on component "LKP Lookup SecurityID" (6658) failed with error code 0xC004702C. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
"
The hex code of this exception corresponds to the following description : "DTS_E_BUFFERNOTLOCKED. This buffer is not locked and cannot be manipulated." That's as much as i could find on this.
My suspision is that the SSIS engine somehow figures that the lookup in these distinct packages is the same one and builds a shared version of the lookup table in memory. Then there is some sort of a multi-threading issue in accessing this shared memory which leads to the exception above.
Has anyone experienced this? Can someone shed some light on this?
Thanks a lot
-Alex
Hi guys,
I have experienced problem while trying to use variable with expression based on several other variables in tasks running parallel.
The details are as following:
There is a SSIS package with simple Control flow: one Script Task which actually do nothing and two Execute Process Tasks, they run after Script Task in parallel. Then there are three simple (EvaluateAsExpression = False) string variables ServerName, Folder and JobNumber with values ServerName = €œ\test€?, Folder = €œtest€? and JobNumber = €œ12345€?. And there is one variable FullPath with expression @[User:: ServerName] + "\" + @[User::Folder] + "_" + @[User::JobNumber]. All the variables are of the Package scope. Then in Execute Process Tasks I have similar expressions based on FullPath variable: Execute Process Task 1 has expression @[User::FullPath] + "\date.bat" and Execute Process Task 2 has @[User::FullPath] + "\time.bat" one. As you understand these expressions define what exactly task should execute.
Then I€™m going to execute package from command line so appropriate XML configuration file has been created. The file contains following values for variables described above: ServerName = €œ\LiveServer€?, Folder = €œJob€? and JobNumber = €œ33091€?.
After series of consequent executions I have got following log file:
€¦ Execute Process Task 1€¦ Executing the process €œ\LiveServerJob_33091date.bat€?
€¦ Execute Process Task 2€¦ Executing the process €œ\Test est_12345 ime.bat€?
€¦ Execute Process Task 1€¦ Executing the process €œ\Test est_12345date.bat€?
€¦ Execute Process Task 2€¦ Executing the process €œ\LiveServerJob_33091 ime.bat€?
€¦ Execute Process Task 1€¦ Executing the process €œ\LiveServerJob_33091date.bat€?
€¦ Execute Process Task 2€¦ Executing the process €œ\Test est_12345 ime.bat€?
€¦ Execute Process Task 1€¦ Executing the process €œ\LiveServerJob_33091date.bat€?
€¦ Execute Process Task 2€¦ Executing the process €œ\LiveServerJob_33091 ime.bat€?
€¦
As you can see one of Execute Process Tasks usually receive correct value of the expression (based on values of variables from the configuration file) while another - incorrect one (based on €œdefault€? values of variables set directly in package). Sometimes wrong value appears in Task 1, next time in Task 2. Situations when both expressions in tasks evaluated correctly are very rare.
Then if you add some more Execute Process Tasks with similar expressions in the package (for ex. simply by copying existing tasks) you€™ll get a good chance to catch error like this:
OnError,,,Execute Process Task 1,,,8/17/2007 2:07:12 PM,8/17/2007 2:07:12 PM,-1073450774,0x,Reading the variable "User::FullPath" failed with error code 0xC0047084.
OnError,,,Execute Process Task 1,,,8/17/2007 2:07:12 PM,8/17/2007 2:07:12 PM,-1073647613,0x,The expression "@[User::FullPath] + "\time.bat"" on property "Executable" cannot be evaluated. Modify the expression to be valid.
Seems variable with expression FullPath is locked during evaluation by one of the parallel tasks in such a way that another task can€™t read it value correctly. Can someone help me with the issue? Maybe there are some options I missed which could prevent such behavior of application? Please let me know how I can make the package work correctly.
Am using SSIS to integrate between two database. First one is insert data from SQL to Sybase. its working fine and insert simulatenously. Now need to update table from sybase to SQL with condition(where). How to do this task. Is there any possiblities to execute SSIS without using SQL agent, Â update simultaneously whenever insert new data in both database.
View 8 Replies View RelatedFor some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
ddave
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:
USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[SalesByCategory]
@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'
AS
IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'
BEGIN
SELECT @OrdYear = '1998'
END
SELECT ProductName,
TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub DisableAllButtons()
btnAdd.Enabled = False
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
btnClearAllPools.Enabled = False
End Sub
Sub EnableOrDisableButtons(ByVal cn As DbConnection)
btnAdd.Enabled = True
If cn Is Nothing Then
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
Else
Dim connectionState As ConnectionState = cn.State
btnOpen.Enabled = (connectionState = connectionState.Closed)
btnQuery.Enabled = (connectionState = connectionState.Open)
btnClose.Enabled = btnQuery.Enabled
btnRemove.Enabled = True
If Not (TryCast(cn, SqlConnection) Is Nothing) Then
btnClearPool.Enabled = True
End If
End If
btnClearAllPools.Enabled = True
End Sub
Sub StartWaitUI()
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
End Sub
Sub EndWaitUI()
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub SetStatus(ByVal NewStatus As String)
RefreshPerfCounters()
Me.statusStrip.Items(0).Text = NewStatus
End Sub
Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click
Dim strConn As String = txtConnectionString.Text
Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()
Try
bldr.ConnectionString = strConn
Catch ex As Exception
MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)
Return
End Try
Dim dlg As New ConnectionStringBuilderDialog()
If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then
txtConnectionString.Text = dlg.ConnectionString
SetStatus("Ready")
Else
SetStatus("Operation cancelled")
End If
End Sub
Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click
Dim blnError As Boolean = False
Dim strErrorMessage As String = ""
Dim strErrorCaption As String = "Connection attempt failed"
StartWaitUI()
Try
Dim cn As DbConnection = _ProviderFactory.CreateConnection()
cn.ConnectionString = txtConnectionString.Text
cn.Open()
lstConnections.SelectedIndex = lstConnections.Items.Add(cn)
Catch ex As Exception
blnError = True
strErrorMessage = ex.Message
End Try
EndWaitUI()
If blnError Then
SetStatus(strErrorCaption)
MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
Else
SetStatus("Connection opened succesfully")
End If
End Sub
Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click
StartWaitUI()
Try
_SelectedConnection.Open()
EnableOrDisableButtons(_SelectedConnection)
SetStatus("Connection opened succesfully")
EndWaitUI()
Catch ex As Exception
EndWaitUI()
Dim strErrorCaption As String = "Connection attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click
Dim queryDialog As New QueryDialog()
If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
Try
Dim cmd As DbCommand = _SelectedConnection.CreateCommand()
cmd.CommandText = queryDialog.txtQuery.Text
Using rdr As DbDataReader = cmd.ExecuteReader()
If rdr.HasRows Then
Dim resultsForm As New QueryResultsForm()
resultsForm.ShowResults(cmd.CommandText, rdr)
SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))
Else
SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))
End If
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Using
Catch ex As Exception
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
Dim strErrorCaption As String = "Query attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
SetStatus("Operation cancelled")
End If
End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
Thanks in advance,
Scott Chang
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1
@Franchise ObjectId
, @dtmStart DATETIME
, @dtmEnd DATETIME
AS
BEGIN
SET NOCOUNT ON
SELECT p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
, count(1) "Count"
, sum(Amount) "Total"
FROM tb_Event t
JOIN tb_Prod p
ON ( t.ProdId = p.ProdId )
JOIN tb_ACDef a
ON ( t.ACDefId = a.ACDefId )
JOIN tb_Curr c
ON ( t.CurrId = c.CurrId )
JOIN tb_Event e
ON ( t.EventId = e.EventId )
JOIN tb_Setl s
ON ( s.BUId = t.BUId
and s.SetlD = t.SetlD )
WHERE Fran = @Franchise
AND t.CDate >= @dtmStart
AND t.CDate <= @dtmEnd
AND s.Status = 1
GROUP BY p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
RETURN 1
END
GO
Hello to all,
I have a stored procedure. If i give this command exce ShortestPath 3418, '4125', 5 in a script and excute it. It takes more 30 seconds time to be excuted.
but i excute it with the same parameters direct in Microsoft SQL Server Management Studio , It takes only under 1 second time
I don't know why?
Maybe can somebody help me?
thanks in million
best Regards
Pinsha
My Procedure Codes are here:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [dbo].[ShortestPath] (@IDMember int, @IDOther varchar(1000),@Level int, @Path varchar(100) = null output )
AS
BEGIN
if ( @Level = 1)
begin
select @Path = convert(varchar(100),IDMember)
from wtcomValidRelationships
where wtcomValidRelationships.[IDMember]= @IDMember
and PATINDEX('%'+@IDOther+'%',(select RelationshipIDs from wtcomValidRelationships where IDMember = @IDMember) ) > 0
end
if (@Level = 2)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+'-'+convert(varchar(100),B.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and PATINDEX('%'+@IDOther+'%',B.RelationshipIDs) > 0
end
if (@Level = 3)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',C.RelationshipIDs) > 0
end
if ( @Level = 4)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0
and PATINDEX('%'+@IDOther+'%',D.RelationshipIDs) > 0
end
if (@Level = 5)
begin
select top 1 @Path = convert(varchar(100),A.IDMember)+ '-'+convert(varchar(100),B.IDMember)+'-'+convert(varchar(100),C.IDMember)+'-'+convert(varchar(100),D.IDMember)+'-'+convert(varchar(100),E.IDMember)
from wtcomValidRelationships as A, wtcomValidRelationships as B, wtcomValidRelationships as C, wtcomValidRelationships as D, wtcomValidRelationships as E
where A.IDMember = @IDMember and charindex(convert(varchar(100),B.IDMember),A.RelationshipIDS) > 0
and charindex(convert(varchar(100),C.IDMember),B.RelationshipIDs) > 0 and charindex(convert(varchar(100),D.IDMember), C.RelationshipIDs) > 0
and charindex(convert(varchar(100),E.IDMember),D.RelationshipIDs) > 0 and PATINDEX('%'+@IDOther+'%',E.RelationshipIDs) > 0
end
if (@Level = 6)
begin
select top 1 @Path = '' from wtcomValidRelationships
end
END
hi, does it make a difference to write the following select statement in either query window or create a sp and then calling the store procedure to be executed..
select * from authors
OR
create procedure authors as
select * from authors
lets assume that we have million records in the author table. is it faster to run the query from within a store procedure or not ?
thanks for your input
Ali
Has anyone encountered cases in which a proc executed by DTS has the following behavior:
1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio
2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+)
The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query)
The Update ad-hoc query will finish in 2 minutes
Hi,Please see the below procedure.create procedure a1asbegincreate table #table1{empid int;empname varchar}insert into #table1 select empid,empname from employee whereempcode='50'select e.* from employee e, #table1 as t1 where e.empid=t1.empid ande.empname=t1.empname; /* query1 */endIn location query1,empid , empname in #table1 substitutes all thevalues at the time, i need to substitute each value individually inlocation query1.Is there any way to do this?
View 1 Replies View RelatedHello AllI get stuck in one problem , Please help me and excuse me on the poorKnowledgein SQL Server Store procedureQ1...I want to return a string type value from store procedure , Is itpossible to do it.if posible then Please guide us how we can do it .Q2...I search a lot on net but i am unable to understand the ExtendedStore Procedure.How to register it and how to use in our store procedure .Q3 ... How to use xp_sendmail.dll in SQL Server.Thanking youWith regardsTarun
View 1 Replies View Related I have a table with a parent, child, and grandchild relationship. Can anyone help me with a query that will return the child and grandchild of a parent?
Heres my table:id pid name--------------------------------1 0 UntID2 0 Vin Number3 0 Make4 3 Model5 4 Model Number6 0 Model Year7 0 Vehicle Type8 0 Odometer MilesWhen I select 3 as the id I need these results:id pid name--------------------------------3 0 Make4 3 Model5 4 Model Number
Thanks for any help!
Ryan
hey.. say i have a table with 4 columns, Id, col1, col2 & col 3the way it works is the id and one of the col's will have info, the other 2 cols will be emptyim trying to write a proc that returns the value of the column that has info + a number that is stored in a string to represent the column eg: CREATE PROCEDURE proc_Test @Id int, @Answer varchar(100) outputasset nocount on select @Answer = col1 +', 1'from myTablewhere Id= @Idif @@rowcount < 1select @Answer = col2 +', 2'from myTablewhere Id= @Idif @@rowcount < 1
select @Answer = col3 +', 3'
from myTable
where Id= @IdreturnGO but for some reason, it only process's the first select statment and if nothing is in the column, it returns - ', 1' cheers!!!
Hi,I am weak in writing stored procedure and want to learn it step by step.Now I have written a query and the requirement is such that I need to convert it in stored procedure.query:Select distinct empskill.tcatid,Coalesce(prm,0) as prm,coalesce(secn,0) as secn,a as technology,coalesce(skd,0) as skd,coalesce(knd,0) as knd,coalesce(tnd,0)as tnd,coalesce(dnd,0) as dnd from empskill RIGHT OUTER JOIN (select tcatid,Count(skilltypeid) AS prm from empskill where skilltypeid=1 group by tcatid) prms ON empskill.tcatid=prms.tcatid LEFT OUTER JOIN (select tcatid,Count(skilltypeid) AS secn from empskill where skilltypeid=2 group by tcatid) secs on empskill.tcatid=secs.tcatid RIGHT OUTER JOIN (select technology.category as a,empskill.tcatid from empskill,technology where empskill.tcatid=technology.tcatid group by empskill.tcatid,technology.category ) s ON empskill.tcatid=s.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS skd from empskill where skilllevelid=1 group by tcatid) skds on empskill.tcatid=skds.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS knd from empskill where skilllevelid=2 group by tcatid) knds on empskill.tcatid=knds.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS tnd from empskill where skilllevelid=3 group by tcatid) tnds on empskill.tcatid=tnds.tcatid LEFT OUTER JOIN (select tcatid,Count(skilllevelid) AS dnd from empskill where skilllevelid=4 group by tcatid) dnds on empskill.tcatid=dnds.tcatid union select top 1 500 as tcatid,'' as prm,'' as sec,'more' as technology,'' as skd,'' as knd,'' as tnd,'' as dnd from empskill Can you please explain step by step how to convert this to stored procedure.Thanks a lot
View 3 Replies View Relatedits possible make a procedure or something inside the sql server to run every 5 hour?? to make a update of a table
View 2 Replies View RelatedIn access, I can create a function that I can call in a query. It runs that function iteratively. Do I have the same ability with SQL server? Can I call a stored procedure WITHIN a query? I would like to be able to do something like:
Insert into tblOrders(spFirst_Name) Select {Call spUpperLower(tblClients.First_Name)} from tblClients Where ...
So basically, spUpperLower would run on every First Name Row in the result set.
Any help would be much appreciated.
Thanks,
Brad