This is embarasing.
I'm creating a 500 line query from XML, CSV's, etc. and I can't fingure this out.
I'm building a very complex "SELECT" query and then shoving it into the [Select] column in a SQL 2005 table. I want to call a stored procedure that just "executes" that query and returns the results....
Any help would rock.
Hi,
I'm working with MRS and I've got a table with a lot of entries. For each value in the table I'm trying to get the text colour to be set to 'red' when the value of the cell is less than 0. Otherwise remain black.
I can do this by setting the colour property cell by cell. But I have a lot of cells in the table. Is there a way to set the statement to apply to ALL cells in the table?
Basically I'm asking if there is a way to set the property in bulk instead of going through tediously cell by cell.
Any help would be much appreciated. Thanks!
Hi!
What I'd like to do is:
UPDATE table1
SET
A_TEXT_COLUMN = (SELECT another_text_column
FROM table2
WHERE table2_id = @precomputed_id_1)
WHERE table1_ID = @precomputed_id_2
Since the cells are text, this does not work. Since the cell to be updated is in an already exitant row, it's not possible to simply use insert.
I'd like to do something like (PSEUDOcode):
WRITETEXT(table1.A_TEXT_COLUMN, READTEXT(@textptr_initialised_to_point_at_target_c ell))
But the *actual* synatx of WRITETEXT and READTEXT seem totally inappropriate for any such trick...
Any hints or pointers HUGELY appreciated... THANX
I have a column defined as smalldatetime. Default length (4), and "allow NULLS" is checked.In the Enterprise Manager UI, when i enter data into that table row, if i just tab past that column, all is well, and the value is represented in the UI as <NULL>.The problem comes once i ever enter a date into that column. Say i have entered a date (all is well), and now i want to remove that entry and go back to NULL (after the date value has been committed, different entry session, say).How is that done?It seems to me, once a date has ever been entered into that column, now, if i try to remove it, i get the error "The value you entered is not consistant with the data type or length of the column, or over grid buffer limit". I have tried deleting the value, entering spaces, entering the string NULL or the string <NULL>; maybe some other tries as well, but none works, i always get that error message and am not allowed to proceed past that cell until i restore a date value to it. I want to get back to <NULL>.Anybody know?Thank you.Tom
View 1 Replies View RelatedI have a report where in I want to show each record on a separate page.
So, to achieve that I took a single cell from table control, expanded it and used all the controls in that single cell. This looks nice so far.
Now, I also have to show a sub grid on each record. So I took a table control and added on the same single cell and tried to add a parent group to the table row.
When I preview, it throws this error.
"The tablix has a detail member with inner members. Detail members can only contain static inner members."
What am I doing wrong? How can I achieve table grouping inside a table cell?
HI,I HAVE AN EXCEL SHEET WITH SOME DATA, I WANT TO IMPORT THAT DATA (CELLBY CELL WITH MANIPULATION) INTO THE SQL SERVER TABLES BY USING STOREDPROCEDURE(IF POSSIBLE).IF ANYBODY HAVE DONE SIMILER TYPE OF JOB OR KNOWING ABOUT IT, PLS. LETME KNOW.THANKS IN ADV.T.S.NEGI
View 4 Replies View RelatedHiI want to achieve the following transformation of data using a storedprocedure.Sourcecol1 col2(varchar)-------------------------1 1.11 1.22 2.12 2.22 2.3=================Desired Resultcol1 col2(varchar)--------------------------1 1.1 | 1.22 2.1 | 2.2 | 2.3=====================Thanks in advance. :)- Parth
View 12 Replies View Related I'm looking at a system where formulas have been added into fields in a table and I need to look at the field to see what formula to use when selecting eg: eg this + this, this / this etc.Here's a basic table I have knocked up to try different things...
CREATE TABLE #HeaderOrder(
[HeaderCode] [varchar](10) NOT NULL,
[HeaderCode2] [varchar](10) NOT NULL,
[FormulaCode] [varchar](10) NOT NULL
[code]...
Hi,
I need to realize multicolumn cell in table for grouping fields, but i don't know how to do that. Help me please.
1col. 2 col. 3 col.
long text grouping field
first second third
data data data
Thank you.
Hi,
A few months back i saw a sample rds file where there was a kind of line graph in a table cell
that indicated how much percent a sales person had to the complete sale figure.
But i cannot find the link anymore.
I would like to have such a linge graph next to all my agents that indicates a value againts a total value.
Does anybody has any pointers where i could find that info ?
Greetings
Vinnie
Hello,
In my .NET.ASP application I generate a random five digit password, like so:
string password = Membership.GeneratePassword(5, 1);
The result could be a password like "0l$IE" and I the save this password to an SQL server. The problem is however that with the generated password five blanks are also added. Instead of "0l$IE" I get "0l$IE ". I hope you understand what I mean? Is there an easy way to correct this?
I appreciate any help!
Hi,
I have an Excel 2007 file which contains values in specific cells like A23, D30 etc.
I want to populate the values in these cells using SSIS packages into individual rows of an SQL table.
How can this be achieved ?
Cheers
Sam
I am converting a site from asp to .net and the previus writer did something I never saw.(I am somewhat new to programming all together). He put multiple values in a single cell of the database. I have always learned to use a seperate column for each value.
Is this a classic asp thing and there are better ways now? Or is this something I should do myself? The columns type is text and the contents look like this:<Details Expertise="bla bla" Description="We are a three-divisional company ...," WebSite="www.blabla.com" AccountLevel="Free" AccountStatus="Active" WorkHomeZIP="22222" ContractStartDate="01/01/2003" ContractEndDate="12/31/2003"><Address Location="Work" State="Oh" ZIP="22222"/><Email Location="Work" Value=""/><Phone Location="Fax" Code="9801" Ext=""/></Details>
I really want to update just one cell without notify the others in record ,but i can not.
example; my table like this.
ID
Increasingnumber
LastModified
1
15
1/1/1900
i want to modify the "increasingnumber" cell only and also not let "LastModify" cell being updated. Can anyone help me solve this problem?
I'm trying to use DTS to import data from an XLS into a SQL table.It works fine in that it INSERT's the data. However, I need it toUPDATE the table, based upon a ProjectID. Can this be done?Can a DTS package be fired from a SP using parameters?Eg UPDATE tProjects SET MyField1=XLS.Sheet1.CellA1,MyField2=XLS.Sheet2.CellA1 WHERE ProjectID = @ProjectID.Also, it must handle dynamic XLS file names, eg 981-Budget.xls,513-Budget.xls, xyz-Budget.xlsIs this the best way to go? Other suggestions most welcome?Thanks everyone in advance!
View 2 Replies View RelatedHella all,
Is it possible to stack two images on top of each other in a table ?
Let me clarify where i'm going to.
I have a report where in one table i would like to display (in a graphical way) how much a sales person has sold towards
the whole sales amount.
To do so i would like to set my background of my cell to yellow and then use an image (just a green rectangle)
where i adjust the padding according to the percentage.
When i set my background to yellow and i insert my image in the cell, the textbox cell properties disapear and are
replaced with the image properties. So also my background that was defined in my textbox is gone.
Now i was thinking if i could set two images on top of each other (a yellow rectangle and a green rectangle). But when
i do that, one image is replaced with another.
Am i doing something wrong or is there another way to achieve what i want to do?
Greetz
Vinnie
In SQL Reporting I want the user to pass a parameter to the report; the parameter is a employee number. Easy right, you write a where statement like where table_name.employee_number =@employee_number. When the user runs the report they€™re asked to type in the number.
My problem is the dB stores the employee number with leading spaces padding the number out to 9, so if the user types in 1 they get jack, but if they type in €˜ 1€™ they get the right employee. I can€™t roll it out that way
I€™d do something in the where clause so the user could just type in 1 & it would auto pad out to 9 spaces. I€™ve tried using the €˜LIKE€™ clause & I€™ve tried using concatenate but so far neither works well.
I'd appreciate any advice
Thanks -- Vince
Hello All,
I uploaded custtable under the database, the data looks fine except that the name that apprears has a lot of distance e.g
it should be :
firstname lastname however the format appears very strange:
firstname lastname
firstname lastname
fistname lastname
Same is the case with the address, I need to adjust or format the apperance that appears on the cell. Is there a way/ sql statement to format the data under the table so that the apprearence looks okay.
I will really appreciate any sort of help on this one.
Thanks,
Rashi
need help
condition 1
replace characters on condition in table and cells
but only if
how to do it - if i put * (asterisk) like in employee 111 in day1 - the the upper characters the (A S B)
i replace characters with '-'
and it must work dynamically
condition 2
replace characters on condition in table and cells
but only if
if i put number or 1 , 2 , 3 , 4 above any cell for example( employee id=222 name =bbbb day1)
i replace characters with '0' and '#'
and it must work dynamically
table before the replace
id
fname
val
day1
day11
day111
day2
day22
day222
day3
day33
day333
day4
day44
day444
day5
day55
day555
111
aaaa
2
A
S
B
e
t
y
R
Y
M
j
o
p
111
aaaa
1
*
*
*
*
222
bbbb
2
1
1
222
bbbb
1
A
-
-
-
B
-
333
cccc
2
333
cccc
1
444
dddd
2
3
4
444
dddd
1
-
-
C
C
555
EEE
2
A
G
C
555
EEE
1
*
table after the replace
id
fname
val
day1
day11
day111
day2
day22
day222
day3
day33
day333
day4
day44
day444
day5
day55
day555
111
aaaa
2
-
-
-
-
-
-
-
-
-
-
-
-
111
aaaa
1
null
null
null
null
222
bbbb
2
0
0
222
bbbb
1
#
-
-
-
#
-
333
cccc
2
333
cccc
1
444
dddd
2
0
0
444
dddd
1
-
-
#
#
555
EEE
2
-
-
-
555
EEE
1
null
tnx for the help
Is there any way I can set the background colour for an image in a table cell (or even for a non-embedded image for that matter)? I always seem to get a white background.
It is a GIF image file.
Thanks
What would be an equivalent expression for ISNULL(datafield, 0) for a table/matrix cell? I am using iif( Len().. to find out if there is something in the cell, and displaying zero in the cell if the length of cell item is 0, however am wondering if there is any better/elegant way of doing that?
Hi all
I have two cells,having first cell 0 and other cell 5.
How can i add these two cell values.
I used following expression
=Fields!LITMIN.Value + Fields!NUMMIN.Value
But i am getting Concatenated result ie:05
But i need 5.
How can i do it.Pls help me
I don't know if it's a local issue but I can't use temp table or table variable in a PP query (so not in a stored procedure).
Environment: W7 enterprise desktop 32 + Office 2012 32 + PowerPivot 2012 32
Simple example:
   declare @tTable(col1 int)
   insert into @tTable(col1) values (1)
   select * from @tTable
Works perfectly in SQL Server Management Studio and the database connection is OK to as I may generate PP table using complex (or simple) queries without difficulty.
But when trying to get this same result in a PP table I get an error, idem when replacing table variable by a temporary table.
Message: OLE DB or ODBC error. .... The current operation was cancelled because another operation the the transaction failed.
Is there any option to set auto fit the cell size of a table in SSRS 2005?
Thanks
Does anyone know if it is possible to have text in a single table cell where the first field is formatted in italics and the second is in normal?
eg: = Fields!firstname.Value(as italic) & " " & Fields!lastname.Value(as normal)?
shidot
Hi,
I need to a find table which is used by list of stored procedures.
Can you please send me the query which is used?
Thanks and Regards
Abdul M.G
I'm trying to set up Service Broker Services on SQL 2005 x86. I've got two services set up, and a stored procedure associated with one of them.
View 5 Replies View Relatedi want to use store procedure in select query statement. store procedure will take two parameters from table and return one parameter.
for example i want to use
select p1 = sp_diff d1,d2 from table1
sp_diff is stored procedure
d1,d2 value from table
p1 is the returning value
I'm trying to write data to excel from an ssis component to a excel destination.
Even thought I'm writing numerics, every cell gets this error with a green tag:
Convert numbers stored as text to numbers
Excel Cells were all pre-formated to accounting 2 decimal, and if i manually type the exact data Im sending it formats just fine.
I'm hearing this a common problem -
On another project I was able to find a workaround for the web based version of excel, by writing this to the top of the file:
<style>.text { mso-number-format:@; } </style>
is there anything I can pre-set in excel (cells are already formated) or write to my file so that numerics are seen as numerics and not text.
Maybe some setting in my write drivers - using sql servers excel destination.
So close.. Thanks for any help or information.
which is more efficient...which takes less memory...how is the memory allocation done for both the types.
View 1 Replies View RelatedJust wondering if there is an easy transact statement to copy table 1 to table 2, appending the data in table 2.with SQL2000, thanks.
View 2 Replies View RelatedSeems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedI need help with a simple query. We have 86 entries with the City of O'Fallon in our db. How do I do this with the apostrophe in O'Fallon? Below is just to give an idea of what I want. Thanks.
SELECT *
FROM Organization
WHERE City=O'Fallon