Run An SSIS Package From ASP.net
Feb 1, 2008how can i run an SSIS Package from an ASP.net file?
currently, i'm using a stored proc to run my ssis package. is there a way to directly run the ssis package from the asp.net file?
thnx in advance.
ADVERTISEMENT
Job Running SSIS Package Keeps Failing But The SSIS Package By Itself Runs Perfectly Fine
Aug 30, 2006Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
Error While Executing SSIS Package From Other SSIS Package
Jan 10, 2007Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
Passing Execute DTS Package Result (success/failure) To Calling SSIS Package
Mar 6, 2008I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Error Stating Package Failure While Executing SSIS Package In Standard Edition
Feb 2, 2007Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
Several Different Errors When Creating And Running SSIS Package. Package Runs Successfuly Sometimes.
May 2, 2008Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
Is It Possible To Change Or Replace The Default Package Template Named New SSIS Package?
Feb 21, 2008I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies View RelatedSQL 2012 :: How To Capture Data Flow Component Name Dynamically While Package SSIS Package Is Executing
Jun 3, 2014I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedProblem When Running A SSIS Master-package-child Package On Non Default Sql-server Instance
Dec 6, 2007Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
Passing Value From A Child Package To The Parent Package That Calls It In Ssis
May 21, 2007hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
Report With SSIS Package Having Indirect Package Configuration Setup
Sep 10, 2007Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
How To Compose The Connection String Of A SSIS Package That Execute Another Package?
Jul 6, 2006Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
SSIS Parent Package Can Not Find The Child Package
Oct 13, 2007I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies View RelatedSchedule A SSIS Package Which Execute DTS 2000 Package
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
Problem Setting Package Variables In SSIS Package
Sep 8, 2006Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
SSIS Package Failing As A Job, But Getting Successful When Run As Package
Nov 6, 2007when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
Running Ssis Package With Ssis Run Time Compoenents And Sql Server 2000...
Jan 22, 2007running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
Integration Services :: Executing Child SSIS Package In Parent SSIS
Oct 9, 2015I want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
SSIS Called From Agent Job Not Calling New Child SSIS Package Addition
Oct 29, 2007I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
SSIS - Get ServerName From A XML Or TXT File Into SSIS Package
Jan 4, 2008Dear Friends,
I store several configurations in the main database of my SSIS packages. I need to get the servername from a xml or txt file in order to get those configurations stored in my database.
How you think is the better way to do that?
Using a FlatFileSource to read the file and a script to save the value into a SSIS variable?
Using the package configuration I cant do that... maybe I dont know, but I can save the SSIS variale in the configuration file, but what I need is to do the inverse, read the configuration file and save the value in the SSIS variable.
How the best way you suggest?!
Regards!!
Thanks.
Execute SSIS Package Without SSIS Console
Jul 25, 2005Hello,
View 13 Replies View RelatedSSIS - Tracking An SSIS Package Execution
Oct 3, 2007I would like to see if someone can help me out.
Scenarion:
1.- SSIS Package execute tasks on 2000 SQL Server Database
2.- Execution takes places using Business Intelligence Studio
Question:
1.- How can I tracked that SQl 2000 tasks took place using a SSIS Package?
Thanks
Load A SSIS Package Via Web Service: The Package Failed To Load Due To Error 0xC0011008 Error Loading From XML.WHAT IS THAT?
May 19, 2006Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
A SSIS Package
Dec 25, 2006Hi,
I am used Visual Studio SSIS wizard to transfer some data from one database to another with the same table structure. This is the first time I use SSIS. I see two objects created. OLE DB Source extracts some data based on the create date and OLE DB Destination object is a corresponding table.
So query in OLE DB Source:
Select ID,[Desc],[CreateDate] from TableSrc where ],[CreateDate] between ‘1/1/2006’ and ‘1/31/2006’
OLE DB Destination has TableDest as the destination. TableDest has the same structure as TableSrc.
My problem is that when I run the package twice the data will be imported twice. I need to use this package for both new records and updated records in TableSrc . Is there any way I can check if the ID is available in the TableDest, I perform update otherwise perform insert into TableDest.
Thanks,
SSIS Package
May 21, 2008I have created and saved a SSIS package to SQL Server. When I connect to IS, I can see the package. How can I open it and edit it?
View 1 Replies View RelatedSSIS Package
Oct 15, 2007Hi experts
Trying to execute a DTS package using the DTEXEC in the legacy Packages and i keep getting the error like
Could not load package "Package Name" because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
Is it something to do with installing Office on the server
thanks
Vic
I Have My SSIS Package In DEV - Now What?
Nov 15, 2007Hi,
I need to establish a good method of deploying SSIS packages to my LIVE server from my DEV server. Some questions:
1) What does the Package Installation Wizard (file system deployment method) do for me that copying the .dtsx files manually doesn't?
2) Does SQL Server Deployment method in the PIW add them to MSDB instead of the file system?
3) I need to source-control the SSIS packages too but am not using Sourcesafe so can't use the built-in BIDS features for that. Instead I anticpate that I'll be manually source-controlling the .dtsx xml files and probably manually copying them to the file-system on the live server.
4) Does this scenary work? - ideas / improvements welcome:
Use the Package Installation Wizard (file-system) for the initial deployment and any subsequent changes, just re-copy the files manually to the live file-system - would this work??
Many thanks in advance for all responses!
SSIS Package
Aug 9, 2007Hi,
My question is on Deployment issue.
Is it possible to change the configurations after the package deployed in sql server 2005?
If yes ,how?
If no, when should i do , all the setting steps ?
Regards,
Ashok.
Where Has My SSIS Package Gone?
May 29, 2006I created a Package in the ImportExport Wizard, requested it be Saved on the server, and ran the package. But I can€™t find any trace of the Package under SQL Server Management Studio. Where has it gone?
TIA,
Barkingdog
P.S. I remember the €œold€? days of sql 2000 where packages were proudly displayed, prominently, under the €?Data Transformation Services€? option folder. Sigh );
SSIS Package...?
Apr 1, 2008Hi,
Where in SQL Server Management Studio can I view my imported SSIS packages? Should they be showing up there? I successfully import them but don't see them anywhere.
Thanks.
SSIS Package
Jan 16, 2007
Guys
I've migrated a SQL Server 2000 DTS package over to SSIS (which seems to have worked), its a really simple package with just one item, it first checks for a tables existance and deletes if necessary, then recreates the table and then inserts data from a selection of other tables, except its only creating the table no data is being inserted, yet the script to insert data works as I've tried it in a query. Any ideas?
Thanks inadvance
SSIS Package
Oct 11, 2007I want to create a simple SSIS package which reads a View and dumps it as a text file..so far so good...but now comes the tricky part..the Package should read a list of view names in a table look up that view and dump it as a text file or other scenario is it can look up for all view starting with 'O' and save it as a text file.
Is this possible dynamically as this would mean refresh of meta data?
Please advise
SSIS Package
Aug 6, 2007Hi,
I am writng a SSIS package, wherein I would like to select rows from a table using values from a csv file. I have tried this by creating a table to populate the values from the csv file and then creating a OLEDB source with SQL statement which joins these 2 tables and selects the records.
But I do not want to create a table for the csv file. Is there any way I can do this job?
Thanks,