i made a packge with sql task
this task execute stored procedure contains cursor
it take alot of time (arround 1 houre ), want increase the performance
note: sql2005 and sp2
please help
Hi,
I created a package that loads more than 9 crore records in to the destination table. It takes hours to complete a single dataflow.Is there any way to increase the performance of the package?
Dear Friends,
I always use this forum to find support and to try help others.
But this time I need to receive your feedback about my package that will be in prodution in few weeks.
So.. could you give me your opinions? I prefer i write the comments in the blog, but you can write here to...
http://pedrocgd.blogspot.com/2007/10/bicasestudy-package-v2.html
Kind regards and thanks!!
Good work!!
Hi,
I created procedure which completes execution in 20 mins in sql server 2005 but if i kept the same procedure in Execute SQL Task in SSIS and executing means, it is taking 3 hrs.
Is there any way to increase the performance for the above same.
Any help would be appreciated
Thanks
Dinesh
One question I haven't found to date is concerning context. First of all my setup is importing 250 fox tables into sql 2005. I have one main package with 4 child packages. These child packages have in turn on average 3 packages which in turn contain several tables each. This setup is due to resource limitation. Currently it takes about 12 hours, mainly due to my transformations, table size and resource limitations.
Anyway, my question is if i simply changed the defaultbuffermaxrows from default 10,000 in one of my tables to say 100,000, then executing this table import ad-hoc to analyse import time would not be a true reflection of package performance?
What I mean is if I analyse this table stand alone and due to change above time is reduced by say 1 minute, i might think great. But overall, I reckon increasing defaultbuffermaxrows to 100,000 will probably reduce resource allocation to other tables in package and thus could have a detriment to package, so the only way to accurately compare package performance is to make changes at table level and the run main package? - which of course taking 12 hours is not very practical......
Thanks in advance
Hi,
Can anyone tell me how to check the performance of a SSIS package?
Thanks
Hi,
I have multiple data flow tasks defined in my package. The task of the package is to extract data from Oracle/InfoLease tables and put them on to a SQL Server 2005 database.
Listed below are few queries that I had:
1. In SSIS package, I need to add "Data Conversion" component to convert from Unicode string datatype to String datatype. This was not required in SQL Server 2000 DTS package.
2. By default, Individual transformation is created for each column. Is there a way, to create one transformation for all columns.
3. This SSIS package is being executed as part of a job. The execution time takes around 33 mins.
The same functionality of the SSIS package was replicated in form of SQL Server 2000- DTS package and was executed in form of a job. This execution got completed in 9 mins.
So there has been a drastic increase in job execution time. Are there any ways to increase performance.
Any help will be highly appreciated.
Thanks.
Hi,
I know the SSIS memory problem has probably been covered quite a bit, but being a newbie in using the SSIS, I'm not quite sure how to improved the performance of my SSIS package.
Basically, I've a package that loops through all the subdirectories within a specified directory, and it then loops through each file in the subdirectory and with the use of the Data Flow, process each file (according to their filenames) with a Script Component to insert data into a SQL DB.
Each subdirectory has up to 15 different csv files, but each is less than 5kB. I probably have about 100 subdirectories.
When I run the package, it functioned properly, but the package stalled (no error but just stuck in one Data Flow) after a while, and when I checked my CPU memory, it was running at 100%.
I'm not sure how I could fix it or improved the memory allocation. I was not expecting to have any memory problems as the file size is small and the number of rows of data going into and out of the Script Component is no more than 20.
Any advice? Thanks.
Hi,
I would like to know if any one out there has the same performance issue with ssis packages once you move from a 2GB of RAM, 4 processors to a 16 GB of RAM with 8 processors. My SSIS packages performance is extreemly slow especially for one of my loading packages. The execution time for that package is almost double as compare to the execution time on the smaller box (2GB, 4 processor). There is no transformation for this package. It is just one lookup for existing or not and then do the insertion. This package is handling insertion of millions of rows.
The 2GB of RAM, 4 processor box is 32 bit with SP1 and the 16GB of RAM, 8 processors is 64 bit with SP2. However, I did try to force the execution of the package in 32 bit on the 64 bit server. The execution time is still the same as it is executed in 64 bit mode.
If any one out there has experienced the same thing and has known the cause to the problem, please let me know I would greatly appreciated.
Thanks,
MN
I'm working on a fairly straight forward data transfer package and have found that the package runs dramatically faster when I run the package inside BIDS than with DTExec. When I run the package on the server using debug in BIDS, the job completes 1 million rows in around 6 minutes. When I run DTExec with the same package on the same server it is much slower and the package takes roughly 25 minutes to complete.
I know this sounds crazy and that it's supposed to be the other way around with DTExec running much faster, but I'm stumped as to what could be causing the issue. The machine this is running on is a two processor, dual core CPU with GB of RAM and I'm using terminal server to login and create the package with BIDS on SQL Server 2005 SP2.
The main feature of this package is a Foreach container that uses an ADO record set to loop over a set of values from a control table. There are a large number of iterations so the package loops frequently, but the data flow task is fairly simple and uses an OLEDB source and OLEDB destination to transfer data between two SQL Server 2005 databases.
The package works in either BIDS and DTExec, but I'm really puzzled why it would run so much faster inside BIDS?
Thanks in advance,
-Russ
Hi guys,
I have a performance related question about the DTS package in sqlserver 2000 which i have developed
We have developed a DTS package which will migrate a view 'ATTRITION' from Sqlserver 2000 to an Oracle database.The design of the package is as follows
First step: It checks for the existance of the table 'ATTRITION' in oracle database, if table 'ATTRITION' is not there it will create a table called 'ATTRITION' in the oracle db.If the table 'ATTRITION' is already present in the oracle db,then the table is truncated.
Second step: The view 'ATTRITION' is migrated to Oracle table 'ATTRITION'.
For the migration, i have used a connection object which connects to sqlserver 2000 and for oracle connection i have used another connection object 'Microsoft ODBC driver for oracle' and i have joined both the connection objects with 'Transform data task' task which maps one to one from sqlserver 2000 where view 'ATTRITION' exists with oracle database where Table 'ATTRITION' exists.
Roughly i have around 65000 rows in 'ATTRITION' view of sqlserver 2000 which needs to be migrated.When im running the package on my system it takes around 4 minutes to migrate all the rows but when im running it on the server it takes a lot lot of time more than 1 hour.
The view definition im using has more than 10 tables joined together.But if its a problem of query used in the view,and if i run the view seperately it quickly displays the data hardly takes 1 minute. and even if i run the package on my local pc it doenst take much time.Now my confusion is why its taking soo much time on server.If i create a indexed view then will it solve my problem.Please suggest...
Thanks in advance
REgards
Arvind L
Hi,
When I installed SP1 on my SQL Server 2005, the performance of the package designer dropped enormously. I have to wait like 30 seconds after I drag-and-drop a datasource from the toolbox to the design area. Also it takes a very long time to run the very simple package. Not to mention opening some complicated package that was done before applying SP1. The package scheduled in SQL Agent went from 3-4min to 5-6min.
Can anyone address this issue? Maybe there's something I did wrong?
While installing SP1 I ecountered strange behaviour (some messages about file locking, rebooting and stuff), but in the end it said that it was successful
Best Regards
Wojtek
My SSIS package is running very slow taking so much time to execute, One task is taking 2hr for inserting 100k records, i have disabled unused index still it is taking time.I am rebuilding/Refreshing indexes and stats once in month if i try to execute on daily basis will it improve my SSIS Package performance?Â
View 2 Replies View Related
Hi guys,
I have a performance related question about the DTS package in sqlserver 2000 which i have developed
We have developed a DTS package which will migrate a view 'ATTRITION' from Sqlserver 2000 to an Oracle database.The design of the package is as follows
First step: It checks for the existance of the table 'ATTRITION' in oracle database, if table 'ATTRITION' is not there it will create a table called 'ATTRITION' in the oracle db.If the table 'ATTRITION' is already present in the oracle db,then the table is truncated.
Second step: The view 'ATTRITION' is migrated to Oracle table 'ATTRITION'.
For the migration, i have used a connection object which connects to sqlserver 2000 and for oracle connection i have used another connection object 'Microsoft ODBC driver for oracle' and i have joined both the connection objects with 'Transform data task' task which maps one to one from sqlserver 2000 where view 'ATTRITION' exists with oracle database where Table 'ATTRITION' exists.
Roughly i have around 65000 rows in 'ATTRITION' view of sqlserver 2000 which needs to be migrated.When im running the package on my system it takes around 4 minutes to migrate all the rows but when im running it on the server it takes a lot lot of time more than 1 hour.
The view definition im using has more than 10 tables joined together.But if its a problem of query used in the view,and if i run the view seperately it quickly displays the data hardly takes 1 minute. and even if i run the package on my local pc it doenst take much time.Now my confusion is why its taking soo much time on server.If i create a indexed view then will it solve my problem.Please suggest...
Thanks in advance
REgards
Arvind L
1. Use mssql server agent service to take the schedule
2. Use a .NET windows service with timers to call SqlClientConnection
above, which way would be faster and get a better performance?
Hello Everyone,I have a very complex performance issue with our production database.Here's the scenario. We have a production webserver server and adevelopment web server. Both are running SQL Server 2000.I encounted various performance issues with the production server with aparticular query. It would take approximately 22 seconds to return 100rows, thats about 0.22 seconds per row. Note: I ran the query in singleuser mode. So I tested the query on the Development server by taking abackup (.dmp) of the database and moving it onto the dev server. I ranthe same query and found that it ran in less than a second.I took a look at the query execution plan and I found that they we'rethe exact same in both cases.Then I took a look at the various index's, and again I found nodifferences in the table indices.If both databases are identical, I'm assumeing that the issue is relatedto some external hardware issue like: disk space, memory etc. Or couldit be OS software related issues, like service packs, SQL Serverconfiguations etc.Here's what I've done to rule out some obvious hardware issues on theprod server:1. Moved all extraneous files to a secondary harddrive to free up spaceon the primary harddrive. There is 55gb's of free space on the disk.2. Applied SQL Server SP4 service packs3. Defragmented the primary harddrive4. Applied all Windows Server 2003 updatesHere is the prod servers system specs:2x Intel Xeon 2.67GHZTotal Physical Memory 2GB, Available Physical Memory 815MBWindows Server 2003 SE /w SP1Here is the dev serers system specs:2x Intel Xeon 2.80GHz2GB DDR2-SDRAMWindows Server 2003 SE /w SP1I'm not sure what else to do, the query performance is an order ofmagnitude difference and I can't explain it. To me its is a hardware oroperating system related issue.Any Ideas would help me greatly!Thanks,Brian T*** Sent via Developersdex http://www.developersdex.com ***
View 2 Replies View RelatedHello Everyone,I have a very complex performance issue with our production database.Here's the scenario. We have a production webserver server and adevelopment web server. Both are running SQL Server 2000.I encounted various performance issues with the production server witha particular query. It would take approximately 22 seconds to return100 rows, thats about 0.22 seconds per row. Note: I ran the query insingle user mode. So I tested the query on the Development server bytaking a backup (.dmp) of the database and moving it onto the devserver. I ran the same query and found that it ran in less than asecond.I took a look at the query execution plan and I found that they we'rethe exact same in both cases.Then I took a look at the various index's, and again I found nodifferences in the table indices.If both databases are identical, I'm assumeing that the issue isrelated to some external hardware issue like: disk space, memory etc.Or could it be OS software related issues, like service packs, SQLServer configuations etc.Here's what I've done to rule out some obvious hardware issues on theprod server:1. Moved all extraneous files to a secondary harddrive to free up spaceon the primary harddrive. There is 55gb's of free space on the disk.2. Applied SQL Server SP4 service packs3. Defragmented the primary harddrive4. Applied all Windows Server 2003 updatesHere is the prod servers system specs:2x Intel Xeon 2.67GHZTotal Physical Memory 2GB, Available Physical Memory 815MBWindows Server 2003 SE /w SP1Here is the dev serers system specs:2x Intel Xeon 2.80GHz2GB DDR2-SDRAMWindows Server 2003 SE /w SP1I'm not sure what else to do, the query performance is an order ofmagnitude difference and I can't explain it. To me its is a hardware oroperating systemrelated issue.Any Ideas would help me greatly!Thanks,Brian T
View 2 Replies View RelatedI copied and added an existing package as a new package to a project and have been having trouble with settings reverting to those for the original package after I modify and save the changes for the new package. Sometimes happens with the save itself, other times it happens when I close and re-open the package. Most cases are with connections that revert back to the original file reference, but there are also control flow and data flow elements that keep reverting back to either settings from the original package or defaults that result in the re-opened package being in error. Not sure how to get around this issue short of developing the new package from scratch which I'd rather not do since it is fairly complex. Any help anyone can provide is appreciated. Thanks.
View 8 Replies View RelatedHi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies View Relatedi have created one package in production server called User_Import,It will fetch the info from excel file to the Sql  table, I have executed this package in ssis console successfully,But i have to schedule one job using this package on daily basis for that i have created on sql job using this package, Then it is failing i dont know the exact problem,I have full access to my database and full access to the sql agent to exuete any jobs,I have sharing the error message which am getting in the sql agent level, Please find the error msg:
05/11/2015 15:10:20,User_Imports,Error,1,SFRFIDCSCDB003PSQCM03,User_Imports,AD_User Load,,Executed as user: SFRSA-SFR-SQCM-02. Microsoft (R) SQL Server Execute Package Utility  Version 10.50.1600.1 for 64-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.   Started:  15:10:20  Error: 2015-05-11 15:10:20.41   Code: 0xC0011007   Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B} Â
Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error  Error: 2015-05-11 15:10:20.41   Code: 0xC0011002   Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}
Description: Failed to open package file "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.".  This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.  End Error  Could not load package "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ ImportsUser_ ImportsUser_ Imports.dtsx" because of error 0xC0011002. Â
Description: Failed to open package file "C:Userssccmadmin DocumentsVisual Studio 2008 Projects
User_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.". Â This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. Â Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B} Â Started: Â 15:10:20 Â Finished: 15:10:20 Â Elapsed: Â 0.015 seconds. The package could not be found. Â The step failed.,00:00:00,0,0,,,,0
Hi,
I am new to SSIS. I followed the direction of the tutorial Creating Simple ETL Tutorial package in BooksOnline. I have tried more than five times and have done exactly as suggested in the tutorial but it does not work.
The URL is:
http://msdn2.microsoft.com/en-us/library/ms169917.aspx
I get these warnings and finally fails:
1)[Lookup [30]] Error: Row yielded no match during lookup.
2) [Lookup [30]] Error: The "component "Lookup" (30)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (32)" specifies failure on error. An error occurred on the specified object of the specified component.
3) [DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (30) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
4) [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.
Can someone help me with this tutorial error? or Am I doing something wrong.
Thank you,
Hi,
I'd like to know if there's a way to pass parent package parameters to a package executed by SQL Server Job Agent? It appears that sp_start_job doesn't have any variable that could accomodate this.
Hope to hear your ideas.
Hi,
I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.
So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.
Is this possible?
Thanks for your help.
$wapnil
I have created a SSIS package with a Foreach Loop including a Data Flow Task, which in turn include a Row Count component which pass the row count value to variable with package scope. The variable is used in an Execute SQL Task following the Data Flow Task.
The package executes successfully when executed on its own, but when executed as a child from a parent package (which only include an Execute Package Task) the variable from the Foreach Loop becomes NULL.
There are a lot of other variables in the package receiving values dynamically without any problem, the row count variable however is the only variable in the package that receives a value as part of a Data Flow (and used in following tasks within the Foreach Loop).
Why does the variable become Null? For your information, I am using a variable with package scope and no variables from the parent package are used or passed from the child package to the parent package.
(For your information, we are running the 64 bit version)
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies View RelatedHi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?