Runaway Log Files
Jul 20, 2005
Hello,
I am administering a DB which is about 2GB in size and sees few hundred,
maybe up to a few thousand inserts a day plus very few deletions and updates
(less than few hundred). DB has about 200,000 records in it total. For some
time now I have noticed that the transaction logs grow a lot -- like 1GB per
day. I don't know why they are growing so much and would like to find out
why - DB usage that I know of cannot cause such a high growth, to my best
knowledge.
Is there a way to find out what is causing such growth? Can I examine these
logs somehow and see what is in them? I am worried that somehow someone
managed to run mass updates on the DB without my knowledge.
Thanks for help,
Tom Kitta
View 1 Replies
ADVERTISEMENT
Oct 16, 2001
I would like to create a job that wakes up every 5 minutes or so and stops any job that has been running for, say, more than an hour.
Alternatively, when it is a jobs scheduled time to run, if the job is already running, I would like it to stop the previous execution and start over.
Thanks
View 1 Replies
View Related
Jan 9, 2015
I proposed on a new server that we separate Data Files, Log Files, tempDB, Backups, etc. onto separate LUNS on a SAN with High Speed Solid State Drives.I was told that with the new technology with solid state SAN's that it would decrease performance and that it did not work the same way as it did when you had RAID 5's etc.I thought that if things were cared out correctly by a SAN Administrator they would know how to configure for optimal performance.
View 2 Replies
View Related
Mar 13, 2008
In the For Loop, How to Iterate from Older flat files to Newer flat files based on File's Timestamp. If there are some older files in that folder, it should be processed first and then continue with the newer one.
Any Suggestions?
View 3 Replies
View Related
Apr 24, 2008
In the first step of my SSIS package I need to get files from FTP and dump it/them in a local directory, but it's more than that, the logic is like this:
1. If no file(s) found, stop executing and send email saying no file(s) found;
2. If file(s) found, then compare it/them with existing files in our archive folder; if file(s) already exist in archive folder, stop executing and send email saying file(s) already existed, if file(s) not in archive folder yet, then transfer it/them to the local directory for processing.
I know i have to use a script task to do this and i did some research and found examples for each of the above 2 steps and not both combined, so that's why I need some help here to get the logic incorporated right.
Thanks for the help in advance and i apologize for the long lines of code!
example for step 1:
----------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports Microsoft.VisualBasic.FileIO.FileSystem
Imports System.IO.FileSystemInfo
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Dim cDataFileName As String
Dim cFileType As String
Dim cFileFlgVar As String
WriteVariable("SCFileFlg", False)
WriteVariable("OOFileFlg", False)
WriteVariable("INFileFlg", False)
WriteVariable("IAFileFlg", False)
WriteVariable("RCFileFlg", False)
cDataFileName = ReadVariable("DataFileName").ToString
cFileType = Left(Right(cDataFileName, 4), 2)
cFileFlgVar = cFileType.ToUpper + "FileFlg"
WriteVariable(cFileFlgVar, True)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub WriteVariable(ByVal varName As String, ByVal varValue As Object)
Try
Dim vars As Variables
Dts.VariableDispenser.LockForWrite(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
vars(varName).Value = varValue
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
End Sub
Private Function ReadVariable(ByVal varName As String) As Object
Dim result As Object
Try
Dim vars As Variables
Dts.VariableDispenser.LockForRead(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
result = vars(varName).Value
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
Return result
End Function
End Class
example for step 2:
-------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Try
'Create the connection to the ftp server
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
'Set the properties like username & password
cm.Properties("ServerName").SetValue(cm, "ftp.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0") 'The 0 setting will make it not timeout
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
'create the FTP object that sends the files and pass it the connection created above.
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
'Connects to the ftp server
ftp.Connect()
'ftp.SetWorkingDirectory("..")
ftp.SetWorkingDirectory("directoryname")
Dim folderNames() As String
Dim fileNames() As String
ftp.GetListing(folderNames, fileNames)
Dim maxname As String = ""
For Each filename As String In fileNames
' whatever operation you need to do to find the correct file...
Next
Dim files(0) As String
files(0) = maxname
ftp.ReceiveFiles(files, "C: emp", True, True)
' Close the ftp connection
ftp.Close()
'Set the filename you retreive for use in data flow
Dts.Variables.Item("FILENAME").Value = maxname
Catch ex As Exception
Dts.TaskResult = Dts.Results.Failure
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
View 16 Replies
View Related
Feb 24, 2015
I have the need to delete old backup files via TSQL job. Found this solution online:
PushD "
emoteservershareDIFF" &&(
forfiles -m *DIFF*.sqb -d -1 -c "cmd /c del /q @path"
) & PopD
It works remotely if I run it via command prompt. But when I add this to a TSQL job on my remote SQL instance, it runs without deleting anything. What I'm missing?
View 6 Replies
View Related
Oct 8, 2007
Brief overview...Running SQL Server 2003 Server Enterprise 64 bit - All Service Packs and patches current
SQL Server 2005 Enterprise Edition 64 bit Build Microsoft SQL Server 2005 - 9.00.3054.00 (X64) Mar 23 2007 18:41:50 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
I cannot import any SSIS packages nor crete any new folders under stored packages. I hve googled the news groups and looked at BOL to no avail. HELP!!!!
View 20 Replies
View Related
Jul 23, 2005
I am thinking about replacing the INSERT data scriptfiles that I have with XML files. This way I can open the XMLfile using an XML Editor and see the values in a GRID andmake changes easier.Do you see any problem with this approach?I managed to put together some code that is exportinga SQL table with its data to an XML file and also a codethat reads the XML file's data and inserts it into a table.Now I am researching on XSD, td:datatype, DTD...(I am new to XML) in order to figure out how I canuse a single xml file that will hold both the sql serverfields, the datatypes and their values.If you have links to some sample code that has anythingto do with the datatype export and import I am workingon, can you please share them with me?Most importantly what do you think about the idea of usingXML files vs sql scripts?Thank you
View 4 Replies
View Related
Jun 25, 2015
I have a scenario where I need to convert RDF files to PDF files? may I know is this achievable in SSIS - writing C# code?
View 6 Replies
View Related
Oct 1, 2004
I am wanting to reduce the amount of Virtual Log Files I have. In reading through the Online Book Documentation, I realize that I have forgotten to move the Transaction Log Files to a different drive. Now that the server is in production, I wanted to get some input about the best way of making this change.
Can I just change the directory the log files are being written to in the DB properties without having any adverse problems occurring?
View 2 Replies
View Related
Sep 17, 2004
Hi!
I'm using replication with two database on SQL 2000,when begin, the log files size is 50mb and the data files size is 150mb. But now the log files size is 2Gb and the data files size is 4Gb. I would like to decrease the log files and the data files ??? How do i do this???
(I using Truncate and shrink doesn't change )
Thanks!!!
View 2 Replies
View Related
Dec 11, 2005
I need to write codes to access many image files and wave files and display them on the webpage. Both of these files are stored on the server (as many experts in this forum adviced) and their locations are in the SQL server database. About the wav files, I think I will have to convert them to MP3 first for fast delivery on internet. Since I am a newbie, any help would be appreciated.
Thanks,
View 14 Replies
View Related
Jul 20, 2005
I have a problem with bcp and format files.We changed our databases from varchar to nvarchar to support unicode. Noproblems so fare with that. It is working fine.But now I need a format file for the customer table and and it is notworking. It is working fine with the old DB with varchar, but withnvarchar I'm not able to copy the data. The biggest problem is, that Igot no error message. BCP starts copying to table and finished withouterror message.This is my table:CREATE TABLE [dbo].[Customer] ([ID] [int] NOT NULL ,[CreationTime] [datetime] NULL ,[ModificationTime] [datetime] NULL ,[DiscoveryTime] [datetime] NULL ,[Name_] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AI NULL ,[Class] [int] NULL ,[Subclass] [int] NULL ,[Capabilities] [int] NULL ,[SnapshotID] [int] NOT NULL ,[CompanyName] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AI NOTNULL ,[TargetRCCountry] [nvarchar] (255) COLLATE SQL_Latin1_General_CP1_CI_AINOT NULL ,[LocationID] [int] NULL ,[MirrorID] [binary] (16) NULL ,[DeleteFlag] [bit] NULL ,[AdminStatus] [bit] NULL) ON [PRIMARY]GOand this is the format file:8.0131 SQLINT 1 12 "#~@~#" 1 ID ""2 SQLDATETIME 1 24 "#~@~#" 2 CreationTime ""3 SQLDATETIME 1 24 "#~@~#" 3 ModificationTime ""4 SQLDATETIME 1 24 "#~@~#" 4 DiscoveryTime ""5 SQLNCHAR 2 510 "#~@~#" 5 Name_SQL_Latin1_General_CP1_CI_AS6 SQLINT 1 12 "#~@~#" 6 Class ""7 SQLINT 1 12 "#~@~#" 7 Subclass ""8 SQLINT 1 12 "#~@~#" 8 Capabilities ""9 SQLINT 1 12 "#~@~#" 9 SnapshotID ""10 SQLNCHAR 2 510 "#~@~#" 10 CompanyNameSQL_Latin1_General_CP1_CI_AS11 SQLNCHAR 2 510 "#~@~#" 11 TargetRCCountrySQL_Latin1_General_CP1_CI_AS12 SQLINT 1 12 "#~@~#" 12 LocationID ""13 SQLBINARY 1 33 "#~@~#
"13 MirrorID """#~@~#" is the field terminator. We have a lot of text files with allkind of charachers in it. So we think this is a set that will neveroccur in our files.Thanks for your help!*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 2 Replies
View Related
Jun 14, 2007
Hi All,
Are there any MDS Descriptor Files associated with Databases Files? Are these associated with transaction logs? As per my information there are .mdf , .ndf and .ldf files.Could anyone please guide me ASAP,as there is an urgent requirement from one of the clients?
Thanks in Advance
Gaurav Matkar
View 5 Replies
View Related
Jan 21, 2006
Is there a way to do this with some sort of task ?
View 7 Replies
View Related
Nov 8, 2006
I'm using script task to rename files inside foreach loop files,code like shown below
Dim file As New System.IO.FileInfo(CStr(Dts.Variables("User::FileName").Value))
dim newname as string = Split(file.Name, "_")(0) & ".jpg"
Dts.Variables("User::outputname").Value = file.DirectoryName & "" & newname
Then,i use ftp task to send files,but prompt "the variables User::outputname doesn't contains file path(s)"
I tried to use file system task to perform that,but failed either
Rename file operation in file system only can rename a file in a specified location,who can help me?
TIA
View 1 Replies
View Related
Sep 3, 2007
Hi gurus,
I've created a linked server (and set up the corresponding schema.ini file) in order to perform bulk-inserts from some CSV text files into SQL tables (from my standpoint the text files are just for reading purposes). The linked server works fine (I can select the data in the files without a problem).
Now the question: is possible to automatically detect when one or more of those files change in order to start the import process automatically? Something like having a trigger created on the CSV files Or there's no easy way to do that so I have, to say something, to create a Job that periodically checks if the files have changed programatically (say, recording each file's timestamp everytime is imported and comparing the recorded value with the current one, or whatever)?
Thanks a lot in advance!
View 1 Replies
View Related
Jan 22, 2008
Hello,
I might have a rather strange question but I was wondering if there is a way/tool that can be used to convert/import Word documents (.doc) into Reporting Services report files (.rdl). The problem is that I have lots of Word documents containing e.g. survey question. The reports are very extensive with many pages and many "graphical" objects e.g. rectangles etc.. Now I want to have all these reports imported into Reporting Services, i.e. I want the .doc-files to be converted to .rdl-files. I do not want to use e.g. OfficeWriter but I want the .doc-files to be migrated to the rdl-format. Is that possible, is there a tool for this? Both file formats are Microsoft formats, so there should be a conversation tool right?
Best Regards
Lars
View 13 Replies
View Related
Sep 22, 2004
Hi!
I'm using SQL Server 2000!
How to know then Data files size and Log files size by Store Procedures or Sql query?
Thanks!
View 1 Replies
View Related
Sep 19, 2006
Hi,I guess it is a very simple question but I really can't think of an answer,If I'm using csv files as a database what disadvantages may I have ?I encrypt the data so it is secured and I found a csv reader that reads the files very fast.Why would I use SQL instead ?Thanks,Alex.
View 1 Replies
View Related
Jan 27, 2008
Hello,
I am working with a database that has 4 files, 2 with weird extentions and one with .NDF and the other with .ldf. Can I combine the files when I restore so that I have just two files like the rest of the data files on my system. I am no database expert, need some help.
Thanks.
View 2 Replies
View Related
Nov 9, 2000
Am i right in saying that Log Files can only be saved onto the physical disk of the server? I think i am. In that case has anyone got a good way of scheduling a Job that removes the Log Files from the local server and puts them onto another server?
Cheers
View 2 Replies
View Related
Jun 28, 2000
Is there a way to truncate or reset a log while a process is running on the database?
View 1 Replies
View Related
Oct 25, 2000
Firstly I should mention that I'm new to the SQL Server arena. I'm using SQL server 7.0 with SP1.
I have a DTS problem whereby I'm trying to import a DIF file and I can't find anyway to do it. I've got over it at the mo rather cruedly by importing to excel and exporting as an excel file. However this limits me to 66K rows which I will need to exceed.
I can't find any information anywhere which tells me if I can do this, and I can find no odbc drivers to help. I'm sure its possible but the file type seems so wierd compared to a tab delimited one!
Hope someone can help.
Thanks,
Dave.
View 1 Replies
View Related
Oct 23, 2000
We want to run some dts packages from files.
However when we try and do this is has more than one version.
Does anyone know how we can call only the latest version from a file?
Thank you,
Dianne
View 1 Replies
View Related
Nov 11, 2002
Hi:
I am new to this forum..Does anyone know of a quick and easy way to combine MDF and NDF files for the SAME database??...Or does the entire database have to be exported and then imported into database with only an MDF file available??..thanx in advance for the help !!!
View 2 Replies
View Related
Jun 19, 2003
I'm new to the world of SQL. I have a Db that has a size of around 4Gb and a log file of 40 Gb. I've got approx 5 Gb of disk left. How can I reduce the log file size??
View 2 Replies
View Related
Sep 3, 1998
Hi there! I hope somebody out there can lend a helping hand on this challenge I`ve been struggling with. I am new to this site so please excuse my ignorance on protocol. Anyway, I`m faced with a challenge of loading a 100 plus column, comma delimited file into SQL Server. I had this process working at one point, but for whatever reason, am receiving "memory allocation" errors related to my BCP process. What I`m doing is trying to load a comma delimited file into SQL Server. I`ve "creatively" created a format file that loads the data into their respective columns and "tricks" the comma quote comma delimiters in dummy fields (associate a 0 server column). So now I`ve got a format file with about 200 Host file count (column count). The problem is is that I run my bcp via the command line, my Dr. Watson kicks in and I get the Window`s NT standard "Application Error" stating that I do not have enough memory allocated resources. What is strange however is that if I change my column count to say 150, my bcp works (minus that last 25 fields). Not that I`m picky or anything, but my users insist they need the last 25 fields. I`ve tried everything I could think of from upping my virtual memory threshold, to running on different workstations (including the SQL Server). Any advice would be greatly appreciated.
Desiree Malapitan
View 1 Replies
View Related
Jan 16, 2002
I need help.
Here is the problem.
I have 4 .dat files that I need to combind into either one table or file.
I can't seem to get this process to work. The only delimiter is a comma
between each row.
I have not got a clue how to do this. When I use the import wizard it
does not work.
Does anyone know how I can get these files inserted into a SQL table??
Thanks for your help. I seem to always get a solution from you guys.
Dianne
View 3 Replies
View Related
Jul 28, 2006
hi guys,
this may sound like a silly question - so here goes, i have a .sql file and basically i need to know jow to run the sql in that file on my database.
Do i need to copy the code across to query manager?
thanks for your help
andy
View 2 Replies
View Related
Dec 20, 2005
Hi All,
One of my databases has .ldf file that is bigger in size than .mdf file. Is it a problem? If yes, what can cause this problem? And how to fix it? I looked at all the other ones and the .ldf files are smaller than .mdf files. Thanks.
View 4 Replies
View Related
Feb 4, 2004
Hi,
I'm running a SQL Server used only for development and testing. Because of this, a lot of DELETE commands (and other "logable" operations) are issued.
Now, I DON'T WANT to use any logging at all on this server because I don't see the use for it and it's taking too much space on my hard drive.
How can I remove the log files and stop SQL Server from using them? Plus, maybe for some reason that I don't understand, this is not such a good idea. If so, can you please tell me why?
Thanks,
Skip.
View 4 Replies
View Related
Feb 5, 2004
How would I turn a CSV file into a working SQL Database?
View 2 Replies
View Related
