Running MSSQL 2000 Database In A 2005 Server

Jun 26, 2006

I'm running 2000 databases in a 2005 server. Can anyone tell me if there are adverse effects in doing this?
As I understand it, the 2005 performance benefits are available to databases running as 2000(Ver80) But some of the new futures may not be available..
And any documentation from Microsoft/white papapers regarding this subjects are appreciated..

View 8 Replies


ADVERTISEMENT

Running Scheduled Stored Procedures MSSQL 2000/2005

Jul 15, 2007

 Hi allI am looking for the best method to automate a website's database management. Lets say I have a user registration database and the users register. This sends an automated email to the user with a link to activate the users registration. If the user does not register within 24 hours, his registration must be automatically deleted from the database using a stored procedure.I know how to do this using the global.aspx file, however there must be an alternative way of doing this, especially if the database is an SQL database. I do not know how much MSSQL server access is given to a developer by an as ISP who hosts the website.Can anyone tell me what would be the best method to use.ThxWarren 

View 1 Replies View Related

Conversion Of MSSql 2000 Database To MSSQL 2005 Database

Jan 18, 2008

How to convert a database in MSSQL 2000 to MSSQL 2005 database.Is there any tool or documentation available for this?

View 3 Replies View Related

Server Configuration For MSSQL 2000 And MSSQL 2005

Sep 6, 2006

Does enabling/disabling Data Execution Prevention have a performanceimpact on SQL 2000 or SQL 2005?For SQL best performance - how should I configure for:Processor Scheduling:Programs or Background servicesMemory Usage:Programs or System Cache

View 9 Replies View Related

Creating Index In MSSQL 2000 From MSSQL 2005

Mar 24, 2008

Hi,

I am a bit new to the MSSQL server. In our application, we use so many SQL queries. To imporve the performance, we used the Database enigine Tuning tool to create the indexes. The older version of the application supports MSSQL 2000 also. To re-create these new indexes, I have an issue in running these "CREATE INDEX" commands as the statements generated for index creation are done in MSSQL 2005. The statements include "INCLUDES" keyword which is supported in MSSQL 2005 but not in MSSQL 2000.

Ex:-

CREATE INDEX IND_001_PPM_PA ON PPM_PROCESS_ACTIVITY

(ACTIVITY_NAME ASC, PROCESS_NAME ASC, START_TIME ASC, ISMONITORED ASC)

INCLUDE

(INSTANCE_ID, ACTIVITY_TYPE, STATUS, END_TIME, ORGANIZATION);


Any help in creating such indexes in 2000 version is welcome.

Thanks,
Suresh.

View 2 Replies View Related

Generating Script For MSSQL 2000 From MSSQl 2005?

May 3, 2008

Hello
We are using SQL 2005 and now we are planning to use SQL 2000. what are the ways to do the process.

We taken the script spcificall for 2000 and run it in SQL 200. But we are getting the error in SCRIPT?

Could you please give me the step to do?

Thanks,
Sankar R

View 6 Replies View Related

MSSQL 2000 And SQL Server 2005 Express

Jul 5, 2006

Hi,

Does anybody know if MSSQL 2000 and SQL Server 2005 Express Edition can live together on the same machine?

I need to keep MSSQL 2000 up and running while evaluating the SQL Server 2005 Express Edition.

Thank you,
Paul

View 2 Replies View Related

MSSQL Express 2005 Vs. MSSQL 2000

Jun 15, 2006

Ben writes "I have a sql script that doesn't function very well when it's executed on a SQL 2000 server.

The scrpt looks like this:


---------------------------------------------------------------------------------------------------
USE [master]
GO
IF NOT EXISTS (SELECT * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
EXEC sp_addlogin N'SSDBUSERNAME', N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
If EXISTS (Select * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
ALTER LOGIN [SSDBUSERNAME] WITH PASSWORD=N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
IF EXISTS (select * from dbo.sysdatabases where name = 'ISIZ')
DROP DATABASE [ISIZ]
GO
USE [SurveyData]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
GO
USE [SurveyManagement]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
---------------------------------------------------------------


I need to be converted to a script that can be executed on both MSSQL 2000 and MSSQL 2005.

I was wondering if somebody there could help me with this problem?!

Thanks,
Ben"

View 1 Replies View Related

Migration MSSQL 2000 32-bit To MSSQL 2005 64-bit

Nov 17, 2007

I've been tasked to move our production databases on MSSQL 2000 to 2005. I've supported MSSQL since version 6.5 and performed migrations to successor versions.

Current Environment is MSSQL 2000 32-bit with current Service Packs.

I've performed mock migrations on Test servers upgrading all Production instances simultaneously from MSSQL 2000 to 2005 32-bit. The Test environment is identical to Production minus server name, IP etc. Also I have a separate server with MSSQL 2005 installed where I use the DETACH / ATTACH and BACKUP / RESTORE method for migration / acceptance testing. There are approximately 30 databases totaling 70 GB. This has gone as expected and fairly successful. Vendors have been coordinated with to update code and staff for acceptance testing.

I'd prefer going directly to MSSQL 2005 64-bit instead if possible due to memory benefits etc. This is where I'd like some feedback prior to borrowing a 64-bit server for testing.

Upgrade options:

1. Is it better to migrate from MSSQL 2000 32-bit to 2005 64-bit via:
a. DETACH / ATTACH
b. BACKUP / RESTORE
c. Is one method more advantageous relating to the end result?
2. Regarding XP clients, have issues been experienced with the default SQL Server driver or is an alternate recommended for XP clients to connect to a MSSQL 64-bit server databases?
3. If you have performed this migration and have relevant experience please pass them along.

View 3 Replies View Related

SQl 2000 && 2005 Running On Same Server

Jul 30, 2007

Hi,


I've installed sql2005 on a windows 200 server. now the requirement is to install sql2000 also on the same server.

Would like to know if any have experienced and type of problem on having both sql on same server. and if there is any impact on installing sql2000 after sql2005.

thanks in advanced

View 5 Replies View Related

How Do I Make An MSSQL 2000 Server Database Go Offline/Online Using VB 6

Jun 21, 2001

Does anyone know how to do this? I am in the middle of writing a server side program, and this is one thing that I cannot do without.

Also, if anyone can answer that, how do I do the same with an Exchange 5.5 Email account?

Thanks ahead of time!
Cash Coleman

View 1 Replies View Related

Running SQL Server 2000 And 2005 On The Same Computer

Nov 4, 2005

Does anyone know whether or not both versions can be installed on the same machine?

View 1 Replies View Related

Running SSEUtil On SQL Server 2000/2005

May 23, 2008

Hi,

I have three systems that running different version of SQL sever..
1. my notebook - SQL Server Express 2005
2. my WS - SQL Server 2005 Standard
3. my server - SQL Server 2000

I installed SSEUtil to all of them and only the notebook works..
I read the Read me but it doesn't help me resolve my problem so I hope someone from this forum can help me out..

The problem:
Running sseutil on system 2. and 3. get this error, but not on 1.
SSEUtil
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Additional information:
The service 'MSSQL$SQLEXPRESS' is not installed.


I tried -m but it doesn't help..

Any idea how to fix it?

Thanks,

T.

View 8 Replies View Related

Error Running Setup Script For MsSQL 2005

Apr 26, 2006

Hi,

I have installed SQL 2005 and was trying to run one of the Samples. I installed SQL as an instance, but when I run the setup script, it fails because it can not assign permissions to the ASPNET account.

It looks like it thinks the account is ServerNameInstanceNameASPNET, but it should be ServerNameASPNET.

Thanks,
Michael Wassermann

View 1 Replies View Related

Setting Up Replication On SQL Server 2000 Using Distributor Running On SQL Server 2005

Jul 6, 2006

Hi

I have a setup where I need to replicate the database which is actually subscribing from another database. The current setup is all in SQL Server 2000. I need to now setup a Distrbutor on a SQL server 2005 and publish the database using this distributor to another server on SQL server 2000.



Has anybody done this before. If yes what will I need to check. Can you please let me know :-



1) SQL Server 2000 which SP should be installed to support this enviroment.

2) SQL Server 2005 which SP should be installed to support this environment.

3) Any thing that I need to look out for.



Thanks for any inputs on this.



Regards

View 3 Replies View Related

Secruity Question, Putting SQL Server 2000 Or 2005 On Windows Server 2003 Running A Website

Jan 31, 2006

Where can I further educate myself on this subject?

Right off from the start I would assume that installing SQL Server 2000 or 2005 on Windows Server 2003 that is set up as a web server hosting a website would be against "best practices." Is my assumption right?

Common sense tells me to not to host a website on a pc that is also hosting my database.

View 4 Replies View Related

SQL Server 2005 Running In 2000 Compatibility Mode And Reporting Services

Sep 17, 2007

Can you run SQL Server 2005 in SQL Server 2000 compatibility mode and still use it with Reporting Services 2005?

View 4 Replies View Related

Running An Instance Of SQL Server 2000 In SQL Server 2005

Apr 30, 2007

Can I run an instance of SQL Server 2000 in SQL Server 2005?



I was planning on restoring a backup of my SQL Server 2000 db to SS 2005, but keep the SS 2000 configuration. The main reason for doing so is to maintain the DTS packages I have in SS 2000 because my understanding is that these are not easily duplicated in SS 2005 Integration Services.



Thanks-Dave

View 6 Replies View Related

Why Cannot Connect To My MSDE Database If There Is SQL Server 2005 Running?

Jan 12, 2007

Hello,

I have one program using MSDE as database. It runs OK on the machine with MSDE or without MSDE.

But it can not connect to MSDE database if PC with 'Microsoft SQL Server 2005' and 'Microsoft SQL Server Desktio Engine(MICROSOFTSMLBIZ)' installed.

Form SQL Server Server Manager: my instance ...MYINSTANCE and ...SQLEXPRESS are both running OK.

Why not connect to my MSDE instance under this situation? Could anyone give me any advice?

Thanks,

Dennis

View 6 Replies View Related

Have You Ever Installed MSSQL On A Server With Oracle Already Running ?

Apr 6, 2007

am i going to cause problems if i install MSSQL2005 on a server with Oracle already installed and running ?

thank you

View 6 Replies View Related

(Urgent)web Service And Sql Server 2005 Database Running In Two Different Systems

Apr 26, 2006

hi all,

i have a requirement that web service running in one system and sql server 2005 database running in another systems which is not working currently.

suppose i create end point in the system where sql server 2005 database is there,then its working fine.

Actually for creating end point we should have windows server 2003 or SP2.Configuration part i dont have any hindrance.

Can any one tell how to run webservice in one system with sql server 2005 in another system.

Thanks

venkat





View 2 Replies View Related

Connection String For Default Instance Of SQL Server 2005, On A Box Also Running A Named Instance Of SQL Server 2000

Nov 15, 2007

The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
 I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However,  I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
 but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
 
Am I mssing something here? Any help much appreciated
Thanks...
 

View 2 Replies View Related

Reverting From MSSQL 2005 To 2000-Help Please....

May 12, 2007

I have installed MSSQL 2005 on my D: drive of my windows 2003 server, but now need to install MSSQL version 2000 b/c I realized I have one less license than I thought I had. I have build no databases, only the default information. Can I install another instance (being the 2000 instance) on the same drive? If I can't, can I install it on the Crive without a lot of issues???? Or would it be easier to remove 2005 and just start from scratch? The sql version is 9.0. Any help or comments would be greatly appreciated.!!!!!

View 3 Replies View Related

MSSQL/Server Setup/running Issue/question...

May 30, 2007

i have a client with a windows 2003 server with 4 processors & 32 GB RAM, then MSSQL 2000 SP3. our software seems to run fine on it until the Task Manager shows the MSSQL using 1.7GB of RAM. At this point the whole system seems to slow down to a snails pace. Any ideas as to why 1.7GB and it never goes over that amount no matter how much activity i run on it. Restart mssql and everything seems to run good up until we see the 1.7GB again.

View 1 Replies View Related

MSSQL 2005 Schemas Vs SQL 2000 Users

Aug 20, 2007

Hello,
I think now MS SQL 2005 support packaging database object into schemas which may be granted access by any of the db users, while SQL 2000 only we could use the database creator user instead of schema. my case is i am working in a system with more than one module, e.g. HR + TaskManagemt.
Both HR and TaskManagement objects are in the same database, and there are some common objects.
I want to isolate the HR objects from the TaskManagemt objects, so i can package any module separated from the other, suppose i want to buy only the HR module, so that i want only to exctract the HR Object + the common objects but not the TaskManagement objects.
So how can i accomplish such operations using SQL 2005 schemas AND using SQL 2000 users.
P.S. i have two servers one with 2000 and the other with 2005, so i want to find solutions for both 2000 and 2005
 Thanks in advance

View 3 Replies View Related

Restoring Database MSSQL 2000

Jul 16, 2004

Hi All

We restored a database but the user asscociated with that database is not being restored. Is there a way to do this?

Question: Is there a way to restore the complete database including the users.

Thanks

James

View 3 Replies View Related

MSSQL 2000: Copying Database

Oct 4, 2006

Hi,

I am using MSSQL 2005 but we have to work in compatibility mode with MSSQL 2000 and also we are only allowed to use 2000-compatible features, now my question:

I need to programmatically copy a database within the same server (including all stored procs, triggers and tables, indices) ...

Can anybody give me a hint what is the best way for reaching this target??

Thanks a lot in advance

Greetings
Stefan

View 5 Replies View Related

Set Password To Database On SQL Server 2005 Express Running In Mixed Authentication Mode

Apr 20, 2006

Just like with Access DB, can we set password for database in SQL Server 2005 Express ?

Reason to do so is, user with Login having sysadmin previliage can acess all databases in SQL server.

so just want to restrict database access to only those users who knows the password.

Is there any possible solution ? Pls comment.

Thanks.

View 4 Replies View Related

Standby Server Running SQL Server 2000 And 2005 Side By Side

Sep 27, 2006

I have one standby server that I use for multiple production DB SQL Server 2000 servers. We are upgrading one of the production SQL Servers to 2005. I will install 2005 on my standby and run 2000 and 2005 side by side.

Is this okay? Are there any caveats specific to running 2000 and 2005 on the same standby server?

Thanks!
JL

View 1 Replies View Related

Upgrade From MSDE 2000 To MSSQL 2005 Workgroup Edition?

Aug 1, 2006

I have clients that have the MSDE version installed and we need to upgrade there program to the MSSQL 2005. Is there an easy way to convert the data? Should or Could I uninstall MSDE and than install MSSQL2005 WorkGrp? Will there data be affected? Any tips would be appreciated.Thanks!

View 1 Replies View Related

Running SQL Server 2000 &&amp; 2005 Side By Side

Jan 9, 2006

Hai

My system is already installed with SQL server 2000 . Is it possible for me to install SQL server 2005 BETA CTP in the same machine and run both side by side.

Regards
 

View 3 Replies View Related

Problem With Connecting With Online Mssql 2000 Database

Sep 30, 2007

dear all  i tried to connect to online mssql2000 database from enterprise manager,but i can't as i have a proxy server.how can i overcome this proxy server during connection ?

View 3 Replies View Related

Inserting CheckBox Values Into A Database (MSSQL 2000)

Sep 12, 2005

I have been trying to add values to a database and it keeps failing
i have no idea what i am doing wrong please help the code is asp.net
using vb. I have been having serious trouble passing check boxes in
forms from day one both singularly and dynamically from datagrids
if someone could show me some sample code of how to pass these
sort of values into the component and on to the query in this way
i would very much appreciate it.

Fuzzygoth

the error returned is

Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException:
INSERT statement conflicted with COLUMN FOREIGN KEY constraint
'tblStation_FK00'. The conflict occurred in database 'TealSQL', table
'tblTravelPoint', column 'travelpointID'.
The statement has been terminated.

I have marked the area of the code the error is returned in the colour Violet and with a ##

The code i am using is below


## The aspx page ##

<%@ Page Language="vb" Debug="true" Trace="True"
Inherits="Devotion2Motion.AdminComp"
Src="../CodeBehind/AdminModule.vb"   %>
<!-- Binds the ActivityResortInfo.ascx user control to the page -->
<%@ Register TagPrefix="UserContol" TagName="D2MHeader" Src="../UserControls/Header.ascx" %>
<%@ Register TagPrefix="UserContol" TagName="D2MFooter" Src="../UserControls/Footer.ascx" %>
<%@ Register TagPrefix="UserContol" TagName="TravelPointDD" Src="../UserControls/TravelPointDD.ascx" %>
<script language="vb" runat="server">
   
    Sub Page_Load()
   
        If IsPostback = True Then
       
        Dim aInternational As Integer
       
        Dim Station As String = Request.Form("StationFrm")
        Dim Type As String = Request.Form("TypeFrm")
        Dim Address1 As String = Request.Form("address1Frm")
        Dim Address2 As String = Request.Form("address2Frm")
        Dim City As String = Request.Form("cityFrm")
        Dim International As String = Request.Form("InternationalFrm")
        Dim TravelPoint As Integer = Request.Form("_ctl5:dsTravelPointDD")

            If IsNothing(International) Then
                aInternational = "0"
            Else
                aInternational = "1"
            End If

            Dim AdminTravelPoints As New Devotion2Motion.AdminComp()
            ' Select the country dropdown list
           
AdminTravelPoints.AddStation(Station, Type, Address1, Address2, City,
aInternational, TravelPoint)
               
        End If
       
        Dim ReadResultTable As New Devotion2Motion.AdminComp()
        ' Select the country dropdown list
        dsResultSet.DataSource = ReadResultTable.GetStationtbl()
        dsResultSet.DataBind()
       
    End Sub

</script>


<!-- This UserControl Pulls in the header UserControl and the Div Tag Positions it #css reffrence is TopControl -->
<Div Class="TopControl">
    <UserContol:D2MHeader runat="server"/>
</Div>

<form method="post" action="AdminTravelPoint.aspx" runat="server">
<Div Class="CentreControl">
<table border="0">
<tr>
    <td>
        <asp:Label Text="Station Name: " CssClass="BodyStyle" runat="server"/>
    </td>
    <td>
        <asp:TextBox ID="StationFrm" CssClass="PrimaryGrid" runat="server"/>
    </td>
<tr>
<tr>
    <td>
        <asp:Label Text="Type: " CssClass="BodyStyle" runat="server"/>
    </td>
    <td>
        <asp:TextBox ID="TypeFrm" CssClass="PrimaryGrid" runat="server"/>
    </td>
<tr>
<tr>
    <td>
        <asp:Label Text="Address1: " CssClass="BodyStyle" runat="server"/>
    </td>
    <td>
        <asp:TextBox ID="Address1Frm" CssClass="PrimaryGrid" runat="server"/>
    </td>
<tr>
<tr>
    <td>
        <asp:Label Text="Address2: " CssClass="BodyStyle" runat="server"/>
    </td>
    <td>
        <asp:TextBox ID="Address2Frm" CssClass="PrimaryGrid" runat="server"/>
    </td>
<tr>
<tr>
    <td>
        <asp:Label Text="City: " CssClass="BodyStyle" runat="server"/>
    </td>
    <td>
        <asp:TextBox ID="CityFrm" CssClass="PrimaryGrid" runat="server"/>
    </td>
<tr>
<tr>
    <td>
        <asp:Label Text="International: " CssClass="BodyStyle" runat="server"/>
    </td>
    <td>
        <asp:CheckBox ID="InternationalFrm" CssClass="PrimaryGrid" runat="server"/>
    </td>
<tr>
</tr>
    <td>
        <asp:Label Text="Travel Point: " CssClass="BodyStyle" runat="server"/>
    </td>
    <td>
        <UserContol:TravelPointDD runat="server"/>
    </td>
<tr>
</tr>
    <td>&nbsp;
       
    </td>
    <td>
        <input value="Submit" type="submit">
    </td>
</tr>
</table>
</Div>

<asp:DataGrid ID="dsResultSet" AutoGenerateColumns="False" CssClass="PrimaryGrid" ShowHeader="true" runat="server">
<Columns>
    <asp:BoundColumn DataField="StationID" ReadOnly="true" HeaderText="Station ID"/>
    <asp:BoundColumn DataField="Station" ReadOnly="true" HeaderText="Station"/>
    <asp:BoundColumn DataField="Type" ReadOnly="true" HeaderText="Type"/>
    <asp:BoundColumn DataField="Address1" ReadOnly="true" HeaderText="Address"/>
    <asp:BoundColumn DataField="Address2" ReadOnly="true" HeaderText="&nbsp;"/>
    <asp:BoundColumn DataField="City" ReadOnly="true" HeaderText="City"/>
    <asp:BoundColumn DataField="International" ReadOnly="true" HeaderText="International"/>
    <asp:BoundColumn DataField="TravelPoint" ReadOnly="true" HeaderText="City"/>
</Columns>
</asp:DataGrid>

</form>


<Div Class="CenterControl">
    <UserContol:D2MFooter runat="server"/>
</Div>


##the vb componet that passess to the sql query ##

Public Function AddStation(ByVal Station As String, ByVal Type As
String, ByVal Address1 As String, ByVal Address2 As String, ByVal City
As String, ByVal aInternational As Integer, ByVal TravelPoint As
Integer) As SqlDataReader

            ' Create Instance of Connection and Command Object
            Dim
myConnection As New
SqlConnection(ConfigurationSettings.AppSettings("strConn"))
            Dim
myCommand As New SqlCommand("sp_call_Station_Insert", myConnection)

            ' Mark the Command as a SPROC
            myCommand.CommandType = CommandType.StoredProcedure

            ' Add Parameters to SPROC
            Dim
parameterStation As New SqlParameter("@Station", SqlDbType.NVarChar, 50)
            parameterStation.Value = Station
            myCommand.Parameters.Add(parameterStation)
           
            ' Add Parameters to SPROC
            Dim
parameterType As New SqlParameter("@Type", SqlDbType.NVarChar, 50)
            parameterType.Value = Type
            myCommand.Parameters.Add(parameterType)
           
            ' Add Parameters to SPROC
            Dim
parameterAddress1 As New SqlParameter("@Address1", SqlDbType.NVarChar,
50)
            parameterAddress1.Value = Address1
            myCommand.Parameters.Add(parameterAddress1)

            ' Add Parameters to SPROC
            Dim
parameterAddress2 As New SqlParameter("@Address2", SqlDbType.NVarChar,
50)
            parameterAddress2.Value = Address2
            myCommand.Parameters.Add(parameterAddress2)

            ' Add Parameters to SPROC
            Dim
parameterCity As New SqlParameter("@City", SqlDbType.NVarChar, 50)
            parameterCity.Value = City
            myCommand.Parameters.Add(parameterCity)

            ' Add Parameters to SPROC
            Dim
parameteraInternational As New SqlParameter("@aInternational",
SqlDbType.Int, 4)
            parameteraInternational.Value = aInternational
            myCommand.Parameters.Add(parameteraInternational)

            ' Add Parameters to SPROC
            Dim
parameterTravelPoint As New SqlParameter("@TravelPoint", SqlDbType.Int,
4)
            parameterTravelPoint.Value = TravelPoint
            myCommand.Parameters.Add(parameterTravelPoint)

            ' Execute the command
            myConnection.Open()
           
            ## Dim result As SqlDataReader = myCommand.ExecuteReader(CommandBehavior.CloseConnection)

            ' Return the datareader
            Return result

    End Function


## The sql stored procedure ##

CREATE PROCEDURE [dbo].[sp_call_Station_Insert]
(
@Station As nVarChar(50),
@Type As nVarChar(50),
@address1 As nVarChar(50),
@address2 As nVarChar(50),
@City As nVarChar(50),
@aInternational As nVarChar(50),
@TravelPoint As Int
)
AS


DECLARE @ConVale As nVarChar(50)

SET @ConVale = (SELECT Station FROM tblStation WHERE @Station = Station)

If @ConVale = @Station
   
    BEGIN
        SELECT * FROM tblStation
    END
ELSE
    BEGIN
        insert into tblStation
            (Station, Type, address1, address2, city, International, TravelPoint)
        values (@Station, @Type, @address1, @address2, @City, @aInternational, @TravelPoint)
        SELECT * FROM tblStation

    END
GO

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved