Running Reporting Services ExecutionLog DTS Package In SQL 2005
Feb 21, 2006
I need some help, I am new to Microsoft SQL Server 2005 Integration Services and I am having some problems running Reporting Services ExecutionLog Package in Integration Services. After setting up and running the package, I received this warning message : "Truncation may occur due to inserting data from data flow column 'InstanceName' with a length of 38 to database column 'InstanceName' with a length of 32". I have modified the column length for 'InstanceName' from 32 to 38 in the affected table but I am still receiving this warning message : "The external metadata column collection is out of synchronization with the data source columns. The column 'InstanceName' needs to be updated in the external metadata column collection"
How do I update column 'InstanceName' in the external metadata column collection?
Where do I find the package steps logs (sysdtspackagelog or sysdtssteplog) when running the package as a job or manually.
View 1 Replies
ADVERTISEMENT
Sep 17, 2007
Can you run SQL Server 2005 in SQL Server 2000 compatibility mode and still use it with Reporting Services 2005?
View 4 Replies
View Related
Mar 22, 2008
Hello,
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified.
Restored my Reportserver and ReportserverTempDB databases
Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database
System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script)
at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'?
Is it possible to migrate from 32bit to 64bit?
Any help is appreciated
View 1 Replies
View Related
Jun 27, 2007
Hi,
I have recently installed SQL Reporting Service for SQL 2005 and started using it. I have one existing code that was using reporting services. But when now I try to run application it gives following error:
=============================================================
The request failed with HTTP status 503: Service Unavailable.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[WebException: The request failed with HTTP status 503: Service Unavailable.]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +533199
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +204
Ti.Dosa.Reports.ReportingServices.ReportingService.Render(String Report, String Format, String HistoryID, String DeviceInfo, ParameterValue[] Parameters, DataSourceCredentials[] Credentials, String ShowHideToggle, String& Encoding, String& MimeType, ParameterValue[]& ParametersUsed, Warning[]& Warnings, String[]& StreamIds) +175
Ti.UIWeb.NDD.ReportViewer.RenderReport(String[] reportParmsStr, String reportLocation, String reportFormat) +525
Ti.UIWeb.NDD.ReportViewer.Page_Load(Object sender, EventArgs e) +467
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +47
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
=============================================================
Please let me know what might be the problem.
Thanks,
Deepak
View 2 Replies
View Related
Feb 5, 2007
I have a question regarding Reporting Services:
I want to run the Reports on a system that has Oracle Database but reporting Services are not installed there. Only Application exe file will be there designed in .NET Windows Forms.
Reports will access oracle Database.
View 7 Replies
View Related
Apr 2, 2008
The Gobal value for the reporting timeout is 10 minutes (600).
I Have a report which takes around (1hr to run).. The report correctly timesout (page cannot be display)
but the query kept on running..until it completed.
Is there any way to stop this from happening (Report and Query timeout after 10 minutes)
I have look on the internet and in my rsreportserver.config ..
<Add Key="SQLCommandTimeoutSeconds" Value="60"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
.. This information seems to be ingnored
View 2 Replies
View Related
Oct 27, 2015
My problem is:
I have an order , (order id) and multiple boxes (ex: 7 boxes)
I must create a report, that contains among others a bar code => composed like this : "orderId+01" for the first box, "orderId+02" for the second box, .... , "orderId+07" for the 7-th box
I need this report to repeat itself for each box , only the bar code is changed.
Once I call it , it must generate 7 labels in this example.
Now i am able to generate only one report. Iam using report builder 3.0
View 5 Replies
View Related
Sep 29, 2015
We couldn't get the report through SSRS deployed URL. We found dead locks in SQL DB end.how to proceed further issue resolution.
View 5 Replies
View Related
Jul 20, 2015
On my report, I have two parameters that are used to filter my report. I would like for the report to initially run without filters and without having the user required to input parameters. I know that this can be accomplished by using the multi value parameter and having it "Select All" by default, but for my parameters, I would like for each parameter to only allow the user to select one value. Is it possible to have this requirement without having to enable select multi values?
View 2 Replies
View Related
Oct 20, 2015
I have the below chart.
In this, I need to add line charts for the three years specifying the running total. I already have bar charts for the respective years. This is the query that I used to get the dataset.
SELECT [Parent Name], [ID], [Year], [Month], SUM([Value]) AS 'Running Total'
FROM Regulus_Data_Backup
GROUP BY [Parent Name], [ID], [Year], [Month]
order by [Parent Name],[ID], [Year], DATEPART(mm,CAST([Month]+ Convert(varchar(4),[Year]) AS DATETIME))
Then I added a series with a expression that had the chart type as line as shown below.
My Expression was
=RunningValue(Fields!Running_Total.Value,SUM,"MonthWiseData")
My 3 parameter was "MonthWiseData" which is my dataset name. Is this correct? I use the same dataset to get the bar charts too. I get a error message now when loading the report saying "the scope parameter must be set to a string constant.
My goal is to get bar values for 3 years for the 12 months and in the same chart get the cumulative numbers for the 3 years for the 12 months. How can I do this?
View 14 Replies
View Related
Sep 2, 2015
After adding cascading parameters my report which was running earlier is failing. I'm using Report builder 3.0, windows 2008r2, am running the report from the server
Error message "An error has occurred during report processing.(rsProcessingAborted)
Query execution failed for dataset 'LastName' (rsErrorExecutinGcOMMAND)
Incorrect Syntax near ','."
Is there a way where i can look up the code in xml using report builder or some other way so that i can delete the extra '','.
View 6 Replies
View Related
Oct 9, 2009
How can I identify the computer of the person running an SRS report? If I query HOST_NAME() it gives me the host of the reporting server, not the person browsing.So, for example, Melissa opens a browser from computer named AAA to the SRS and pulls up her report. How do I get that report to show that the user is browsing from AAA?
View 12 Replies
View Related
May 28, 2015
I want to get a running total. But its a bit tricky. I have data depending on ID, YEAR, Month, Value like the following.
ID, Year, Month, Value
36002084 2014 Jan 8391
36002084 2014 Jan 0
36002084 2014 Jan 3440
36002084 2014 Jan 0
36002084 2014 Jan 548
36002084 2014 Jan 109
36002084 2014 Jan 125
I wrote the Query below
select
[UEP ID],[Year],[Month],sum([Total VtM EUR]) 'Running Total'
from
RegData
where
[UEP ID]=36002084 and [Year]=2014
group by [UEP ID],[Year],[Month]
I got this output
36002084 2014 Apr 887620
36002084 2014 Aug 789440
36002084 2014 Dec 528453
36002084 2014 Feb 606627
36002084 2014 Jan 331613
36002084 2014 Jul 681314
36002084 2014 Jun 330384
36002084 2014 Mar 1044301
36002084 2014 May 671818
36002084 2014 Nov 465576
36002084 2014 Oct 590147
36002084 2014 Sep 527861
Now I need to get a output like this,
36002084 2014 Jan 331613
36002084 2014 Feb 938240
A running total depending on the ID, Year and Month. Although I showed this for two steps I need to get it from one query.
Question is - To get a running total based on ID, Year, Month. If I do the normal group by and sum query I could get it for all the months for each id. But need to then add January value to February and updated February value.
View 10 Replies
View Related
Apr 23, 2015
Where is a package visible when running the Data Import/Export wizard, choosing to save a package, and choosing "SQL Server" as the location? When I make an SSIS connection in Management Studio I do not see the package under the "MSDB" node.
View 4 Replies
View Related
Sep 25, 2015
I have created an event that contains a Data flow tasks with OLE DB source & Excel Destination.
This event is executed/triggered based on an execute SQL task failure in the control flow Sequence container.
However, when I execute the Data Flow task of the Event Handler, it runs successfully but fails when I execute the whole package.
I get the below error message:
[OLE DB Source [21]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "TK463DW" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have tried setting the property 'DelayValidation' to 'True' on all the Control Flow and Data Flow tasks on the package and on the Event Handler, but still I could not fix this.Not sure What I am missing.
View 4 Replies
View Related
Aug 20, 2015
I am looking for solution for "Communication link failure" since many months in google but no luck, am running an SSIS package to load data. job failing many times with error 'Communication link failure', searched every where but found nothing.
Below is the complete error description when job failed.
OS - Windows server 2008 R2 Enterprise Edition
RAM - 198GB
SQL server 2008 R2 Enterprise Edition and error description is below,
Started: 6:22:40 AM Error: 2015-08-19 18:50:32.70 Code: 0xC0202009
Source: Data Flow Task Lookup [193]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80004005. An OLE DB record is available.
[Code] ....
View 5 Replies
View Related
May 21, 2007
Hi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
View 4 Replies
View Related
Oct 7, 2015
I created a view that i want to use in ssrs.In the view there is a column for running balance.In the table contain transaction of inventory with their quantity.
"SELECT TOP (100) PERCENT ITEMNMBR, TRXSORCE, DOCTYPE, DOCNUMBR, DOCDATE, HSTMODUL, UOFM, UNITCOST, EXTDCOST, TRXQtyInBase,
(SELECT SUM(TRXQtyInBase) AS Expr1
FROM dbo.INVTRXB AS b
WHERE (DEX_ROW_ID <= a.DEX_ROW_ID) AND (ITEMNMBR = a.ITEMNMBR)) AS ENDQTY
FROM dbo.INVTRXB AS a
ORDER BY ITEMNMBR, DOCDATE"
If i run the query on sql or use the view on ssr. The end qty is not showing accurately.I ran it on another database it works perfectly. Then i noticed that the dex_row_ID of the second database is sequential as the date. But for the initial database it was not sequential as with the date.
View 4 Replies
View Related
Jun 4, 2015
Is there any way to get SSRS 2014 report viewer to run in standards mode? We currently host SSRS report viewer in a standards mode IFrame. Seems to work fine for all browsers but IE8. In IE8, the report detail is missing.
I'm guessing that SSRS Viewer on IE 8 requires Quirks mode.
I noticed this article which states that SSRS 2014 Viewer only works in quirks mode.
Rendering issues with SQL Server Reporting Services reports in Internet Explorer
How do you get the SSRS viewer to run on IE8 in standards mode?
View 3 Replies
View Related
Jun 2, 2015
I want to create a datasource but the credentials I want to use will be based on the user running the report rater than hard coded.
I have tried using Windows Integrated Security but all i can is cant log in as NTAnonymous User?
View 8 Replies
View Related
Jul 15, 2015
Our project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.
However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio?
View 6 Replies
View Related
Aug 27, 2015
I made one report in SSRS 2008 in which getting data from one SharePoint List.
three parameters in report :
Country
StartDate
EndDate
I am using query which I created with CAML.
query is running well and data is coming correctly if I run this on Query designer.and date format must be YYYY-MM-DD.but when I try to run through on run time then the date control is showing format dd/mm/yyyy.
I change the regional settings of windows and SharePoint site to English(United States). and when I select date control it is also putting date in format like "YYYY-MM-DD'. and in that format report is working well in Query designer view.But on run time still it is not working.
View 3 Replies
View Related
Dec 17, 2007
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). It will only work when the Access database is not open. The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009
Source: NewPackage Connection manager "SourceConnectionOLEDB"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
What am I doing wrong?
View 5 Replies
View Related
Apr 9, 2006
Hi
I have created an SSIS Package which provides Data to a DataReaderDestination. Next I have uncommented SSIS support in rsreportserver.config and rsreportdesigner.config
After that I have set up a shared Datasource in ReportServer and created a Report using that DS of type SSIS.
/FILE D:ETLReportingDataService.dtsx
When trying to see the report using http://localhost/reports I get a message that tells me that the package fails to execute. It does so well when debugging, so my guess is that there is some security issue.
It also does not work in preview dialog in VS. The error message there is "Cannot read the next data row for the data set dsSSIS. Object refernece not set to an instance of an obj.
I haved tried several sec. config-scenarios for the shared datasource. No change
I am using sql 2005 std, march sp1 ctp
Does anyone have a clue what could be the cause of my problem
Thaks in Advance
Alex
View 2 Replies
View Related
Sep 13, 2006
I have a DTS package that I brought over from SQL server 2000 in to SQL Server 2005. I have installed all of the legacy components to run the DTS packages but I need to debug an ActiveX script task. In SQL Server 2000 I could turn on Just-In-Time debugging and use the stop operator (in my vbscript) to break the running script and launch the debugger.
I don't see how to do this in SQL Server 2005 Management Studio. Is it possible to debug a script object in a DTS package running in SQL Server 2005?
Jay Abbott
View 1 Replies
View Related
Mar 23, 2007
Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks
View 5 Replies
View Related
Jul 23, 2008
Need some clarification on calling an SSIS package from SSRS. I have managed to get this to work, but only if I actually build the SSIS package on the report server machine.My SSIS package is very simple it. The control flow is a single data flow task. Within the data flow task is an ole db data source and a data reader destination. I verified that the package works in BIDS.
If I build it and deploy it on the report server I can execute it just fine from integration services (using the dtexec UI panel) in SSMS, no validation errors and no execution errors.If I try to build a dataset (specifying SSIS as the data source type) then immediately on referencing the package I get a "Package failed to validate error". However, if I bring the whole project over to the report server and build it then I can reference it from my Report Services project.
I'm using package deployment security of "Don't Save Sensitive" for the SSIS package with the 'sa' login. After the deployment package is built I edit the connection string to include the password.The remote execution account for the Report Server is set to the administrator of the box. I know these account permissions are overkill, but I'll iron all that out once I get the basic pieces in place and working.
View 11 Replies
View Related
Sep 16, 2007
Hi All,
I'm trying to create reports in RS2005 using AS2000 as my data source. I understand that if I use RS2005 on AS2000, I wont be able to enjoy the OLAP based parameters as in using AS2005. Does anyone know an easy way to easily use Parameters in RS2005 while still using AS2000?
Regards,
Joseph
View 1 Replies
View Related
Apr 26, 2006
I go to the server configuration, cause I want to create a database, once there, I don't see any services running.
I really don't think this is normal.
Have I done something wrong while setup ?
Thanks for your help.
Dave
View 1 Replies
View Related
Jul 30, 2007
Hello,
i have a small problem with the data sources in the reporting services, maybe you can clarify the situation... I have a MS CRM 3 solution with the reporting services 2005 installed. From an other vendor we have a arcplan solution on the 2000 analysis services. I would like to get access from the 2005 reporting services to the 2000 cube. Is this possible? Ive read that the SSMS cant connect to the 2000 cubes. Can i connect from the reporting services??
thank you
regards
Andreas
View 3 Replies
View Related
Jul 28, 2007
My first question is can I run Analysis Services 2005 on a different server to where the databases are running
If yes, any pointers to some articles.
View 1 Replies
View Related
Oct 10, 2007
Currently I receive the following error when executing script within a DTS package in SQL 2005 (it seems to be working in SQL 2000):
Processed 27008 pages for database 'Marketing', file 'Marketing_Data' on file 5.
Processed 1 pages for database 'Marketing', file 'Marketing_Log' on file 5.
BACKUP DATABASE successfully processed 27009 pages in 15.043 seconds (14.708 MB/sec).
(5 row(s) affected)
Msg 213, Level 16, State 7, Line 1
Insert Error: Column name or number of supplied values does not match table definition.
Msg 3013, Level 16, State 1, Line 1
RESTORE FILELIST is terminating abnormally.
The code I am using is:
-- the original database (use 'SET @DB = NULL' to disable backup)
DECLARE @DB varchar(200)
SET @DB = 'Marketing'
-- the backup filename
DECLARE @BackupFile varchar(2000)
SET @BackupFile = 'C:SQL2005 dbsMarketing.dat'
-- the new database name
DECLARE @TestDB2 varchar(200)
SET @TestDB2 = datename(month, dateadd(month, -1, getdate())) + convert(varchar(20), year(getdate())) + 'Inst1'
-- the new database files without .mdf/.ldf
DECLARE @RestoreFile varchar(2000)
SET @RestoreFile = 'C:SQL2005 dbs' + @TestDB2
DECLARE @RestoreLog varchar (2000)
SET @RestoreLog = 'C:SQL2005 dbs' + @TestDB2
-- ****************************************************************
-- no change below this line
-- ****************************************************************
DECLARE @query varchar(2000)
DECLARE @DataFile varchar(2000)
SET @DataFile = @RestoreFile + '.mdf'
DECLARE @LogFile varchar(2000)
SET @LogFile = @RestoreLog + '.ldf'
IF @DB IS NOT NULL
BEGIN
SET @query = 'BACKUP DATABASE ' + @DB + ' TO DISK = ' + QUOTENAME(@BackupFile, '''')
EXEC (@query)
END
-- RESTORE FILELISTONLY FROM DISK = 'C: empackup.dat'
-- RESTORE HEADERONLY FROM DISK = 'C: empackup.dat'
-- RESTORE LABELONLY FROM DISK = 'C: empackup.dat'
-- RESTORE VERIFYONLY FROM DISK = 'C: empackup.dat'
IF EXISTS(SELECT * FROM sysdatabases WHERE name = @TestDB2)
BEGIN
SET @query = 'DROP DATABASE ' + @TestDB2
EXEC (@query)
END
RESTORE HEADERONLY FROM DISK = @BackupFile
DECLARE @File int
SET @File = @@ROWCOUNT
DECLARE @Data varchar(500)
DECLARE @Log varchar(500)
SET @query = 'RESTORE FILELISTONLY FROM DISK = ' + QUOTENAME(@BackupFile , '''')
CREATE TABLE #restoretemp
(
LogicalName varchar(500),
PhysicalName varchar(500),
type varchar(10),
FilegroupName varchar(200),
size int,
maxsize bigint
)
INSERT #restoretemp EXEC (@query)
SELECT @Data = LogicalName FROM #restoretemp WHERE type = 'D'
SELECT @Log = LogicalName FROM #restoretemp WHERE type = 'L'
PRINT @Data
PRINT @Log
TRUNCATE TABLE #restoretemp
DROP TABLE #restoretemp
IF @File > 0
BEGIN
SET @query = 'RESTORE DATABASE ' + @TestDB2 + ' FROM DISK = ' + QUOTENAME(@BackupFile, '''') +
' WITH MOVE ' + QUOTENAME(@Data, '''') + ' TO ' + QUOTENAME(@DataFile, '''') + ', MOVE ' +
QUOTENAME(@Log, '''') + ' TO ' + QUOTENAME(@LogFile, '''') + ', FILE = ' + CONVERT(varchar, @File)
EXEC (@query)
END
View 1 Replies
View Related
Feb 15, 2008
Hi there,
Anyone know how I can replace (or download) the sqlexpr32.exe bootstrap package with the advanced services SP2 edition of SQL 2005 express ?
Pieter
View 9 Replies
View Related
