In a SQL Server 6.5 database a task appears in the Running Tasks tab as Active. I have tried to Stop it for 2 hours but it will not disappear. When I run dbcc opentran against the database it says there are no Active open transactions. I also can't see anything in Current Acitivity.
The task is a scheduled task that runs daily and it has run OK both before and after this Active task
Does anyone know how I can get rid of it
Hey fellow Swynk'ers,
I have a question for ya’ll. Our company plans on migrating to active directory soon. I would like to use mixed mode for security. My question is, will this work? Can SQL 6.5 pick up on Active directory or is this handled at the OS layer?
Thanks,
Lee E. Smith
Hi
Can anyone tell if a COMMIT can be given inside a Active script task in a DTS package? This task performs a transfers a few thousand records from Oracle to SQL row-by-row and I want to commit after each row is processed and not at the completion of the full task. Is this possible.
Balaji
Can I still use my existing Active-X script which is created in SQL 2000 DTS package in the "Acitve-X Script Task" of SSIS?
Any difference I should aware?
How do I call the global variable as I did before?
sSource = DTSGlobalVariables("sourceFile").Value
Thanks.
Recently I migrated one dts package from sql server 2000 to sql server 2005. I chnaged the connection string as well. when i run it in BIDS, I don't get any error. But when I execute it in SSMS (under Integration service) I am getting one error. It is showing :-
Error : The task "Active X Scriopt Task undefined " cannot run in this edition of Integration services. It requires higher level edition.
Task Active X Script Task undefined failed.
What does it mean? How to solve it? I am using SQL server standard edision.
Hi,
I am working with an active x script task and I keep getting this error.
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x01DF3DD4.
I have tried to delete all but the first couple of lines but I keep getting this error. Does anyone have any ideas on how I can fix this. This code worked fine in SQL Server 2000.
Thanks
Brian
This is a snippet of my code
Function Main()
Const adOpenForwardOnly = 0
Const adOpenKeyset = 1
Const adOpenDynamic = 2
Const adOpenStatic = 3
Const adCmdUnknown = &H0008
Const adCmdText = &H0001
Const adCmdTable = &H0002
Const adCmdStoredProc = &H0004
set mySourceConn = CreateObject("ADODB.Connection")
set rstemp = CreateObject("ADODB.Recordset")
set newtbltemp = CreateObject("ADODB.Recordset")
Main = DTSTaskExecResult_Success
End Function
In the t-sql 2012 that is attached message, is a query that always comes up with the same results. It does not make any difference what start and end dates are given to this t-sql. The results are always the same.
DECLARE @StartDateDATETIME
DECLARE @EndDateDATETIME
SET@StartDate= '2013-07-01'
SET@EndDate= '2015-08-01'
; WITH Com_House_1 AS (
[Code] ....
We have a publisher that got red-crossed(Run to problem). I decide to remove and recreate it. However, after remove it, the publisher still stays in Replication Monitor. The remain thing has no distributor and logreader, but only snapshot agent. When to check the property of the agent, we got a error message basically say the job does not exist, which makes sense.
Now, it does not show up in any places, except Replication Monitor. Well, it cannot be removed from Replication Monitor. Can any one tell us how to clear it from Replication Monitor?
Thank you.
More Infor: The replication was set up on 2000.(2000 pub, 2000 dis and 2000 sub) with 2005 Management Studio, and the publication was removed with 2005 Management Studio.
Hello everybody..
I have 40 GB database with following
backup plan
1. transaction log backup every 15 min
2. full backup on disk once every day
Scenario
Full backup started at 2 AM
transaction log started at 2:15 AM
Full backup complited at 4 AM
transaction log backup
complited at 4:03 AM
Here is my questions
Up to what point of time I will have
transaction log ?
When I use sp_who2 I can see that transaction log backup blocked by full backup process
thank you
Alex
Hello everybody...
I have a very simple SSIS package that loop throught the worksheets of an Excel file and insert the data into a SQL server 2005 table.
The SSIS is very simple and works fine the problem is that after the Package executes if I double click on the Excel file imported I have the message that the file is in use.
I think that the Excel connection manager of the package doesn't release the Excel resourse but this is only a guess..
Do am I right? If yes how can I release the resource?
Thank you very much
Marina!
does anyone know why my initial visibility expression (=Level()>1) stays in effect after generating my report? The idea was to display only a couple of levels in the hierarchy at first, so that the user could more easily decide what he wants to expand. But expand doesnt do anything after initial rendering.
The only way I could get this kind of report to work (show hierarchy and expand/collapse) was to live with initial visibility = "visible", but unfortunately, that setting shows all levels right away, not a very user friendly thing.
I am running Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Hi!
I've written an scheduled job for importing an excel file into a sql table.When I try to run the job from Sql server agent , I get the status 'Not running',and in the last run status,it's written 'failed'.I've tested the command before in the query analyzer,and it works.Can someone tell me why isn't this working as a scheduled job?
Thanks in advance!
Hi All,
I have a strange problem that I can't find any information about and was hoping someone could help me out.
Some background:
* I am calling an SSIS package from ASP.Net using the in-process, .net methods.
* I am importing a flat file into a staging SQL Server table using the OLE DB Destination.
* After I import the data, I call some Execute SQL Tasks that does some cleaning of the data.
* I then move the data from the staging table to a final table.
Here's the problem:
When the SQL Task like this:
WHILE @@rowcount > 0
UPDATE Staging_Table
SET [Test1] = REPLACE([Test1], SUBSTRING([Test1], PATINDEX('%[^a-zA-Z0-9 ]%', [Test1]), 1), ' ')
WHERE PATINDEX('%[^a-zA-Z0-9 ]%', [Test1]) <> 0
is supposed to be run, sometimes it will, sometimes it won't. The character replacement always works when I test the package through BIDS but when I call the package from code, sometimes the task doesn't seem to get called. Or, at least, it isn't updating the table correctly. The staging table is poplated and copied to the final table but the character replacement doesn't occur in-between.
Does anyone have any advice on the possible causes or where to investigate further?
Thanks,
s.
Hi all. I'm having a strange problem occur - any help would be appreciated. I have a data driven query task that is a part of a much larger package that runs fine and completes successfully if I run it by right-clicking on it and running an 'execute task' on just that individual task. This completes successfully only when I run it from my local machine with the SQL 2000 box registered on it. The task does not complete - or at least runs for as long as I'm willing to wait - if I run it either as part of the entire package or alone, as described above, directly on the SQL 2000(running Win 2000 Advanced). Obviously this is not good because the larger overall package is an integral part of a nightly cycle. Any thoughts?????
View 1 Replies View Relatedhi frnds,
Till last week my SSIS package was running fine.
now it is throwing the below mentioned error:
SSIS package "DNB_GMS_PO_Transition.dtsx" starting.
Error: 0xC0202009 at DNB_GMS_PO_Transition, Connection manager "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod": An OLE DB error has occurred. Error code: 0x80040E4D.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'cedprod'.".
Error: 0xC00291EC at Taking backup of the affected tables, Execute SQL Task: Failed to acquire connection "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod". Connection may not be configured correctly or you may not have the right permissions on this connection.
Task failed: Taking backup of the affected tables
Warning: 0x80019002 at DNB_GMS_PO_Transition: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "DNB_GMS_PO_Transition.dtsx" finished: Failure.
i was unable to figure it out.but i had connected correctly to Database.
if i run those queries in the Query analyser with the same DB connection its running fine.
its urgent.
please tell me the soultion.
My problem is that I am trying to set up an Execute Process Task to run a C# executable. The .exe captures information from an ftp site and downloads it into a directory on our server. Here is the command line run:
C:SAXOEodinReleaseSaxoEod
I have set the Execute Process Task up as follows:
Require Full name: True
Executable: C:SaxoEODobjReleaseSaxoEod.exe
FailTaskIfReturnCodeIsNotSuccessValue: False
SuccessValue:0
TimeOut:0
WindowStyle:Normal
I have the FailTaskIfReturnCodeIsNotSuccessValue set to False because when it is set to true I get the following error:
Error: 0xC0029151 at Execute Process Task, Execute Process Task: In Executing "C:SaxoEODobjReleaseSaxoEod.exe" "" at "", The process exit code was "-532459699" while the expected was "0".
Setting FailTaskIfReturnCodeIsNotSuccessValue to False does not work either because the files are not downloaded from the FTP site.
I am relatively new to the SSIS arena. I have googled this thing to death and have not found an answer. Any help in the right direction is appreciated. Thanks.
Dave Christman
We are attempting to use Microsoft SQL Server Integration Services Designer
Version 9.00.2047.00 to run a BCP command from a Process task. We are able to do so without a problem when running it interactively, but when run as a SQL Server Agent job the bcp process never completes and the job hangs indefinitely.
We also tried using a Script task for this, with the same result.
Has anyone else run into this problem?
Thanks,
Ron
Dear folks,
I'm trying to call SMO classes from SSIS package but I don't know which reference to use..
Mighn't be Imports Microsoft.SqlServer.Management?? But Intellisense don't give me such info.
Let me know where I'm failing.
TIA
I have a table with the following columns employeeSessionID, OpDate, OpHour, sessionStartTime, sessionCloseTime. I need to see how many users remain active per hour. I can calculate how many logged in per hour, but I am stumped on how to count how many are active per hour. I have a single table that stores login data. I have created a query that pulls out the only the data needed from the table into a temp table using this query. Also note it is possible that the sessionCloseTime is null if the device has not been logged out this would need to be counted a active.
TABLE NAME #empSessionLog Contains the time stamp data OpDate, sessionStartTime and sessionCloseTime.
OpDatesessionStartTimesessionCloseTime
2015-01-202015-01-20 14:32:59.1302015-01-20 14:33:14.6299166
2015-01-202015-01-20 06:58:33.7302015-01-20 15:27:16.9133442
2015-01-202015-01-20 09:56:22.8402015-01-20 17:56:29.7555853
2015-01-202015-01-20 05:59:18.6132015-01-20 14:05:19.0426707
[code]....
can see how many sessions logged in per hour with the following statement:
SELECT
opDate,
FORMAT(DATEPART(HOUR, sessionStartTime), '00') AS opHour,
Count(*) AS Total
FROM #empSessionLog
Group BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00')
Order BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') ASCResults:
opDateopHourTotal
2015-01-20041
[code]....
Where I am stuck is how do I count the sessions that remain active per hour until the session is closed with the sessionCloseTime.
Hi
I am having some teething problems while installing SQL on a 3 node cluster. Within the Cluster configuration I have 3 Cluster Groups with each of them having their associated disk resources. All these disk resources physically exist on a SAN.
The actual cluster is running absolutely fine and I can access all the disks from their respective owner node. The problem only starts when I start installing SQL Server 2005 on this cluster. I specify the Cluster group from the Cluster Group Selection and choose the desired partition and then the error message pops up
"There is not enough diskspace on the destination disk for the current SQL Server data files. To proceed, free up disk space to make room for data files, or install the data files to a different drive"
But the disk I am trying to install it on is 264Gb and none of it is used. I have also tried to change it to a different disk within the same Cluster group but to no avail. I have even tried to install it in a different cluster group all together but I get the same error message.
I have googled around havent found anything so far. The disks have got full permissions for the account I am installing SQL with.
Any help will be much appreciated.
Regards
Adnan
Hi
Is it possible in my DTS Package to check if a stored procedure which I'm executing from the Execute sql task icon can be tested for failure?
Hi!
I just wonder if it is possible to run a scheduled task from a SQL Server 6.5 Client. Whenever I would try to run a scheduled task from a SQL Server Client a would get the error message that says "The SQLExecutive service is not currently running on server 'POFDS1099'. This prevents task 'ACORS2 FS90 People Pull' from being run", but when I would try to go the server itself, the service is runnning. Can anybody please tell me what could be the possible cause of this or perhaps 6.5 doesn't really support running scheduled task using SQL Server client. Thanks.
By the way, I also have SQL 2000 Client running on my local.
Thanks again,
Lhot
Hi..
I'm running a package that has a XML Task in the control flow. This task tranforms a XML file with a XSLT.
The file is about 2 megs on a daily basis, but at the end of the month there is a full dump of data that makes the file to be around 400 megs. There is where my problem is.
I run this on my 2 GB memory workstation and when the memory gauge on the task manager reaches about 1.5gb the package fails with an "Out of memory exception".
I also run this package on a 8GB Ram server, and same applies.
Is there any way of making this package utilize all the available memory, I even increased the virtual memory to see if that helped my issue, but nothing.
Thanks
Forget it -- I decided to take to crappy way out --
Instead of executing a procedure and trying to get the output when running a SSIS package, I simply run the query in the first step of the SQL Agent Job and fill a table with the results.
All I have SSIS do is export the table to a flat file.
I'm getting the following when I try to run in BIDS:
[Execute SQL Task] Error: Executing the query "dbo.prcCreatePayExtract" failed with the following error: "Query timeout expired". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
It appears that the timeout hits at 30 seconds which I've captured in SQL Profiler but I can't see to find where on earth in the package I can set the timeout. The "Timeout" on the task is set to zero and the Connection Timeout and General Timeout are both zero.
Any help is greatly appreciated,
Sid
This should be a very easy question.
I'm trying to develop an SSIS package that will eventually do many things, but I can't get it to do very basic things.
My current test package has 2 tasks in it:
1) File System Task ( FST )
2) Execute SQL Task ( EST )
When running just the SSIS package via the VS2005 IDE ( as startup project ), everything works fine. The FST moves a file from DIR_A to DIR_B and the EST inserts a test record into the test table.
If I set my C# app to the the startup project and execute the package from within the C#, it kinda works. The FST works fine, but the EST does not work and the package returns a "FAILURE" code to the C#.
The EST is incredibly basic. This is the SQL text:
insert into tmpssis ( tmpdata ) values ( 66 );
I'm using ADO.NET, Direct input, FALSE for IsQueryStoredProcedure, and it's using the only connection I've set up to the database.
The FST block runs - the file gets moved, but then it fails on the SQL block for some reason.
I'm open to any suggestions.
Thanks,
-BEP
Hello,
I developed an SSIS package doing a nightly load into a data warehouse. We have an 8 hour loading window - currently the package takes 16 hours to complete.
I isolated the problem to a Data Flow task where +-35% of the time is spent. This task is pretty straight forward:
- OLE DB source, reading +- 800,000 rows from a SQL server database
- 13 Lookups in sequence, to get surrogate keys from dimension tables. Lookups are all on GUIDS.
- An aggregation
- OLEDB target, fact table in a SQL server database.
It seems unreasonable for the this task to take over 5 hours. It spends the majority of time on the lookups - not so much at target, source and aggregation.
Any comments and advice will be greatly appreciated.
Thanks.
(PS some machine details:
OS Name Microsoft(R) Windows(R) Server 2003, Standard Edition
Version 5.2.3790 Service Pack 1 Build 3790
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ARK-SQL
System Manufacturer HP
System Model ProLiant DL380 G5
System Type X86-based PC
Processor x86 Family 6 Model 15 Stepping 6 GenuineIntel ~1866 Mhz
Processor x86 Family 6 Model 15 Stepping 6 GenuineIntel ~1866 Mhz
BIOS Version/Date HP P56, 9/18/2006
SMBIOS Version 2.3
Windows Directory C:WINDOWS
System Directory C:WINDOWSsystem32
Boot Device DeviceHarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "5.2.3790.1830 (srv03_sp1_rtm.050324-1447)"
User Name Not Available
Time Zone South Africa Standard Time
Total Physical Memory 3,327.30 MB
Available Physical Memory 938.20 MB
Total Virtual Memory 1.10 GB
Available Virtual Memory 2.78 GB
Page File Space 2.00 GB
Page File C:pagefile.sys)
I found this and have done everything it says to do, but I can't get the script to compile. Any ideas on how to run a access macro in SSIS??
Baiscally to execute an Access Macros in SSIS package we need to Download
Microsoft.Office.Interop.Access DLL from Office XP PIAs.
Download site
http://www.microsoft.com/downloads/details.aspx?FamilyId=C41BD61E-3060-4F71-A6B4-01FEBA508E52&displaylang=en
1) Extract the Microsoft.Office.Interop.Access DLL from Oxppia.exe
2) Drag and Drop Microsoft.Office.Interop.Access DLL to Global Assembley Directory(GAC) ie: C:WINNTassembly for Windows 2000 -- C:WINDOWSassembly for ( Win Xp and Win 2003)
3) Copy paste Microsoft.Office.Interop.Access to C:WINNTMicrosoft.NETFrameworkv2.0.50727 for Windows 2000 -- C:WINDOWSMicrosoft.NETFrameworkv2.0.50727 ( Win Xp and Win 2003)
4) Add DLL reference in the Script Task
5) Add the below Code
1) Create a New Project in SSIS
2) Drag and Drop Script Task
3) Copy Paste the code in script task editor
Imports Microsoft.Office.Interop.Access
Try
Dim objAccess As New Access.Application
objAccess.OpenCurrentDatabase("D:TestMacro.mdb", False) ' Add the Access File Path
objAccess.DoCmd.RunMacro("Macro1") ' Replace Macro1 with the name of your macro
objAccess.CloseCurrentDatabase()
objAccess.Quit(Access.AcQuitOption.acQuitSaveNone)
objAccess = Nothing
Catch ex As Exception
System.Windows.Forms.MessageBox.Show(ex.ToString())
End Try
Dts.TaskResult = Dts.Results.Success
Hi
I am newbie in SQL Clustering. I have set up a Windows Server Cluster with 2 nodes and am having the following problem with Physical Disk resource for cluster groups:
My Default Cluster Group (named Cluster Group) has IP Address, Network Name, Physical Disk and MSDTC resources. In addition to that my Default SQL Server instance resources are also in this group. I had this initial set up for Active/Passive mode.
Now I am trying to set up a SQL Cluster in Active/Active mode. For this I have to install another instance of SQL Server in the existing cluster and make a separate cluster group for its resources. I made a new cluster group (SQL Instance Group) with an IP Address and a Network Name resource for this new instance but I dont have any Physical Disk resource to allocate to it. As such while installing the SQL Server Instance I get stuck when I'm asked to select the quorum disk to be used.
Is it possible to configure two quorum disks, one for each group?
What's the concept of dedicated disks resource for each sql instance in a group? Is this same as the quorum disk? If this is not a shared disk how do I configure a dedicated disk resource for my second cluster group (SQL Instance Group)?
Anyone could please help me out with this?
Hi folks,
We are going thru the process of scoping an active/active cluster at one site.
I was wondering whether there will be any issues with mirroring (DB by DB) off the cluster into non clustered server at an alternate DRP site.
Regards, Brian
Sutherland
Hi all, My aim to install active/active 2 node SQL 2005 cluster. I have installed sql cluster on one mode, which automatically installed on node 2.
it works great. However When i tried to install second virtual server, it is not allowing me to install.
it says already install, can anyone tell me how to install active active cluster
I need to start a job task from the command line. Does anyone know of the correct command(s) to do this?
I also need to check to see if a specific job task is currently executing from the command line. Does anyone know of the correct command(s) to do this?
Thanks for any assistance.
Jim
Hi
What SSIS Task or process can i use to stop my Control Flow Process from running?
I created a SQL Task to do a count on a table to see if there is data, if the count is > 0 then the Control Flow task must continue, else it uses a RAISERROR statement which i use with the event handler, but i want to put something in the event handler to stop the process then and not continue?
Any help will be greatly appreciated.
Kind Regards
Carel Greaves
Hi all,
I have a class that utilizes the ThreadPool together with a ManualResetEvent to queue up work items (in this case, FTP downloads) and then waits until all work items have completed before proceeding.
I then use this class inside a Script Component. However, I am getting a "remote procedure call failed" every single time the FTP component starts a download. This same class works perfectly in a WinForm app that I created as a test harness. Also, the synchronized version of the FTP download component works perfectly well from the Script Task -- it's only when I "wrap" the synchronous version in a threaded version that it fails.
Also, when the "remote procedure call failed" exception occurs, sqldumper.exe runs for a split second and creates a minidump. I, unfortunately, cannot inspect the dump because VS2k5 throws a native error when I try to "debug" the dump.
Is it possible to utilize multithreaded code inside SSIS? I noticed that SQL Server prohibits the use of threading as part of its hosting requirements (http://msdn2.microsoft.com/en-us/library/ms172338.aspx) but I'm not sure how that would impact (if at all) the SSIS host.
Thanks,
Vitaly