Running A DLL In The Query Analyzer
Nov 23, 2007
Hi,
I have a DLL that I want to run from the Query Analyzer. I tried the
following:
USE master;
EXEC sp_addextendedproc BLAH, '\Other-ServerPathToBlahBlah.dll'
and I get the error:
ODBC: Msg 0, Level 16, State 1
Cannot load the DLL \Other-ServerPathToBlahBlah.dll, or one of
the DLLs it references. Reason: 126(The specified module could not be
found.).
The DLL was written in Cobol. The "Other-Server" in the Path above is
the server that Cobol (and the DLL) is located on.
I looked at the dependencies for the DLL and it includes (not
surprisingly) Cobol Dll's. It should find those on the other server.
What can I do?
Thanks!
View 5 Replies
ADVERTISEMENT
Apr 9, 2006
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies
View Related
Jul 8, 2002
Hello,
Specifically, I'm having an issue that I can't resolve using the database space utilization procedures recently submitted by Paul Matthews. The servers are appropriately linked and the procedures have been created on the required servers (mix of 7.0 and 2000 systems).
Executing the sp_dbspaceall procedure from query analyzer is successful but it fails when called from a SQL Agent job. It only returns the information of the local server in that instance.
The error message tells nothing of the problem and the logs show nothing at all about the incident. Can someone help me out?
View 3 Replies
View Related
Apr 27, 2001
I am trying to run DTS package from query analyzer and getting following error .
Command from query analyzer is
go
master..xp_cmdshell 'dtsrun /Sirhahadb01 /Usa /P<sa password> /Ntestpack'
Output error message is
output
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSDataPumpTask_1
DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147217887 (80040E21)
Error string: Errors occurred
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
Error Detail Records:
Error: -2147217887 (80040E21); Provider Error: 0 (0)
Error string: Errors occurred
Error source: Microsoft OLE DB Provider for SQL Server
Help file:
Help context: 0
DTSRun OnFinish: DTSStep_DTSDataPumpTask_1
DTSRun: Package execution complete.
Sujit
View 2 Replies
View Related
Mar 25, 2008
Does anyone know how to run a script to get the log size and log space?
When I run the following command it does not work and I don't know why.
DBCC SQLPERF (logspace)
USE [master]
GO
SELECT *
FROM sysfiles
WHERE name LIKE '%LOG%'
GO
EXEC sp_spaceused
If I run this command on a different server I get the ouput that I need. Any help would be greatly appreciated.
msr976
View 4 Replies
View Related
Jun 26, 2007
Hi,
I have a report in SQL Reporting Services 2005 which calls a stored proc and the report takes a very long time to run and sometimes returns zero records. But when i run the stored proc in query analyzer it takes about 4 seconds!!
I have checked the execution log on the RS using the below sql:
Code Snippet
use ReportServer
Select * from ExecutionLog with (nolock) order by TimeStart DESC
It shows that i have a large amount of time for the dataretrieval (601309ms, about 10mins) and does not return any records most likely because of a query timeout:
TimeDataRetrieval TimeProcessing TimeRendering Source Status ByteCount RowCount
601309 2227 3 1 rsSuccess 4916 0
The weird thing is that when i run it in query analyzer, i get about 400 records in 4 seconds !!
I dont understand what RS is doing to take up so much time like this to retrieve data.
The report is very simple - it basically returns the records straight out into a table.
The only thing I somewhat suspected was a parameter data type conflict between RS and SQL, specifically dates. I have a start and end date parameter in the report - i tried specifying this as date and string to see if it made any difference but it didn't.
Any help would be greatly appreciated.
View 19 Replies
View Related
Sep 21, 2007
Hi,How to run a DTS from query analyzer using some t-sql commands??? Is it possible?? What is the command to run a DTS from QA???and What are the possible ways of running a DTS?? from how many types we can execute a DTS like 2 of it i know from EM directly and from the help of Schedule jobs.
View 1 Replies
View Related
Feb 12, 2008
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
View 3 Replies
View Related
Aug 29, 2001
THis is so annoying. I have 3 ADO executes in my program. THe first one creates a view, the second one performs an outer join on that view and returns a result set, the third execute drops the aforementioned view. THe program that is using this is installed on about 200 computers scattered across Germany and Italy, all querying the same MSsql server 7.0. THe queries run quite quick when few users are actively using the program (after hours for example). however in the heat of the day performance goes up and down dramatically with identical queries taking from 1 to 20 seconds to return their result set. Now I initially thought 'bandwidth issue out of our server'. However I noticed that if I take those three queries and run them from the sql server enterprise manager( running on the same computer as the aforementioned program) then the queries run instantly and the data is in my result pane in less than 2 seconds ALWAYS....even when the program is dogging it with 20 second delays before the result set returns. I know it is hanging on the return of the result set as I put a stop after before each ADO execute in order to check which one was eating up my time. Why is there this dichotomy between running the queries from my enterprise manager versus running them from an ADO object. Both are using TCP/IP (no named pipes involved). I havent monkied with the attributes of the ADO result set so they are all set to default.
I have used the sql server profiler to trace these queries and they always run in less than 33 milliseconds. THe duration is also never more than 33 milliseconds. THis stinks of a network resource issue but what always leads me somewhere else is how consistent the performance of the enterprise manager is when it runs the exact same three queries.
Here is my slightly edited connection string
Public Const connection_string = "Provider=SQLOLEDB;Server=000.000.000.000;" & _
"User ID=johndoe;Password=janedoe;Network=dbmssocn;" & _
"database=fidojoe"
Here are the 3 ADO executes:
conn.Execute (sqlstr_create_view)
Set resultset1 = conn.Execute(sqlstr_get_providers_by_DMISID)
conn.Execute (sqlstr_drop_view)
View 3 Replies
View Related
Feb 25, 2012
When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.
result in Excel 2003 SQL OLE DB query
col-A col-B col-C
values...
Result with Query Analyzer and VBA Macro
col-c col-B col-A
values...
View 3 Replies
View Related
Sep 1, 2006
If I start a long running query running on a background thread is there a way to abort the query so that it does not continue running on SQL server?
The query would be running on SQL Server 2005 from a Windows form application using the Background worker component. So the query would have been started from the background workers DoWork event using ado.net. If the user clicks an abort button in the UI I would want the query to die so that it does not continue to use sql server resources.
Is there a way to do this?
Thanks
View 1 Replies
View Related
Sep 17, 2005
I am trying to determine which of three stored procedure designs arefastest in the Query Analyzer:One query is a straight SELECT query with all desired rows and a dozen(tblName.RowName = @param or @param = Null) filters in the WHEREstatement.One query populates a #Temp table with the UniqueIDs from the resultsof the SELECT query in the above example, then joins that #Temp tableto get the desired rows.One query users EXEC sp_executesql @sql, @paramlist, @paramin which the @param has the dozen filters.What I'm trying to determine is which is the fastest.Each time I run the query in Query Analyzer it returns the samerecordset (duh!) but with much different Time Statistics.Are the Time Statisticts THE HOLY QRAIL as far as determining which isfastest, and what so I want to look at, the Vale or the Average? Inotice there are different numbers of bytse sen and bytes received foreach of the three queries.Any illumination on this is appreciated.lq
View 4 Replies
View Related
Sep 25, 2006
Hi there
Running query analyzer against two different server.
the first only need 1-2 secs to return the query result,
the other return 7-8 secs for the query result.
plz advice what could cause this slow performance?
thx
View 1 Replies
View Related
Aug 2, 2006
Is Query Analyzer being droped in MS-SQL 2005? I'm using Microsoft SQL
Server Managemant Studio and I couldn't find the Store Procedure node
and Query Analyzer anymore. Help is appreciated.
View 2 Replies
View Related
Aug 16, 2007
Say you have a state column with the name of a state in it. And you need to add a branchId to the table. I know I should not have it in there, and the application should use proper lookup tables, but that's not the case.
Can SQL Server query analyzer loop through and update the branchid field based on a lookup in a lookup table?
How would that be done?
View 3 Replies
View Related
Apr 4, 2008
Hi All,
I think I post this in a wrong section but I cant find forum for sql server and i just have a quick question
basically, I installed sql server 2005 and I need to debug a store procedure.1. Does query analyzer come with sql server 2005?2. If not how can I debug store procedure in sql server 2005?Thanks in advance
View 2 Replies
View Related
Mar 22, 2001
Does anyone know if there is a limitation in Query Analyzer in terms of the number of characters in a query that it will parse?
I am having a problem with some large queries, and I am not sure if it is Query Analyzer, or the SQL Server query parsing engine that is causing the problem.
The query just involves a simple SELECT statement, albeit for a large number of columns.
View 2 Replies
View Related
Aug 2, 2000
Hi,
I'm using SQL Server 7.0. I connect to one database in Query Analyzer and I can use the "Perform Index Analysis" option under the "Query" menu option. when I connect to one of our other databases, the "Perform Index Analysis" option under the "Query" menu option is disabled (greyed out). Does anyone know what the problem could be and how might I be able to enable this option.
Thanks in advance,
Darrin
View 1 Replies
View Related
Mar 8, 2006
Hello
In query Analyzer of SQL2000 when i select
2 Select Queries and Run it shows in same Window as 2 Grids
I have seen people using seperate grid option to view each query results in a Tab query results Pane in MSSQL 7.
Eg Select * from table1 (in one grid)
select * from table2 (in another grid)
like a TAB so that i can move from one tab to another.
Is it possible to do that in query Analyzer?
Regards
View 3 Replies
View Related
Jan 5, 2004
I would like to use the Query Analyzer to create a script that will prompt the user(dialog box) for a response in SQL Server 7.0. I found a post someone mentioned DBMS can return messages and using Query Analyzer.
Thanks for your help in advance.
View 3 Replies
View Related
Jan 17, 2006
I'm trying to do a couple of things with some different tables.
With the first table, I have first name and last name in two separate columns.
I'm trying to create a new ID column that would do the following.
Take the first 3 letters of the last name (and remove any non characters such as ',&) and the first 3 letters of the first name, and then combine them.
I know how to use substring to take the first three, and I know how to combine them, but I'm having problems removing the non alpha characters.
For example, if the columns looked as follows:
First Last
John O'Connor
I'd want the result to look like OCOJOH, however, I'm getting O'CJOH.
The second issue is how would I do something similar if the First and Last Name were in the same column and string.
For example, if the column looks as follows:
Name
John O'Connor Publishing
I'd like to pull the first 3 from the first string before the space and then the next 3 so it would be as follows:
JOHOCO
Finally, I want to compare these new IDs, and add numbers to them.
So if I had the following
First Last
John O'Connor
Johnny O'Connell
The first would be OCOJOH01
The second would be OCOJOH02
If there are not any duplicates with the new ID, I'd like to call it OCOJOH01 and then move on.
Any help/ideas would be greatly appreciated.
Thanks
View 8 Replies
View Related
Mar 29, 2006
Hi;
I would like to change the format of dates that is in colum using query analyzer. The name of the colum is StartD and this how they look: 3292006 I would like to insert the / / . Can someone show me how to accomplish it.
Thank you
View 10 Replies
View Related
Mar 19, 2007
I have a database with couple of store procedure and views.
Is there any way that i can find out all sp or views which contains word like *svc*. I am talking about the containt of the sp and views not name.
We are replacing one module so i have to change the all sp and views which use table or view start with svc.
Need help.
Thanks
View 3 Replies
View Related
Feb 21, 2007
in the market place that will run a query on multiple DBs acrossmultiple servers? Without having to manually connect to each server?If so, can anyone provide a link for it.Thanks
View 3 Replies
View Related
Aug 15, 2006
I am new to SQL and need help running a performance check on our companies dtabase. I use SQL Enterprise Manager 2000. Could someone please help me accomplish this?
Thanks,
Carl
View 3 Replies
View Related
Nov 26, 2007
hi everybody!
this is my first post, so I'd like to say hallo to everyone!
I "work" on SQL Server 2000, and I would like to ask you a question.
Is it correct that i cannot set a database user as database owner (using command sp_changedbowner 'user_name')?
QA returns this error message:
"Server: Msg 15110, Level 16, State 1, Procedure sp_changedbowner, Line 46
The proposed new database owner is already a user in the database."
so I have to use sp_revokedbaccess and then I can change the db owner.
why can't a db user be the db owner?
thanks for the answers!!
View 3 Replies
View Related
May 25, 2007
Hi,
Was wondering if anyone can tell me how to get the Query Analyzer Tool installed to WM6 Professional Emulator inside of VS05?
Thanks,
John.
View 3 Replies
View Related
Oct 18, 2007
Hello,
how is the query analyzer opening a database??? Does someone knows the command it uses to open the connection ??
I ask this because i have corrupted datafiles stored on a flash card which i can not open with connection.open but the analyzer opens them normally. After that i can open the datafiles using normal code
Does it use any special params?? I get the corrupted files on power down and after that i can not open them from my application. I can only do this after i open them once with the query analyzer
The database is about 20 MB stored on a flash card
Thanks in advance
View 1 Replies
View Related
Oct 4, 2007
Say I have this query in my stored procedure. The problem I am facing is @OrgUID contains no value, so I put these 2 lines to debug. Am I using the right way to debug? I couldn't see the value of @OrgUID using this way. OrgUID is the PK in Organization. INSERT INTO Organization (OrgName) VALUES (@DealerName)SELECT @OrgUID = @@IDENTITYprint @OrgUIDreturn
View 4 Replies
View Related
Jan 17, 2008
This has got to be a simple one, but I could not find out how
I have this simple proc for test purposes only...
ALTER PROCEDURE dbo.RotoTest( @strSSN VARCHAR(11), @blnUseACHDate BIT = 0, @intInvestorId int = 0)ASreturn 5
Thats right it does nothing but return 5 and thats because I removed all the real code to simplify my question.
When I hit this proc in SQL Query Analyzer..
exec RotoTest '123-45-6789', 0, 1 No return value is displayed in Query Analyzer.
When I try something like this
exec RotoTest '123-45-6789', 0, 1, intRetValue Output (in this situation I get wrong number of arguments)
How can I get a return value displayed on my screen in SQL QUERY ANALYZER with out modifying the proc? I do not want to modify the proc in anyway (because I can't), I just want to display the return value
View 2 Replies
View Related
Aug 4, 2004
Hi I have a following SP that does not return results. Could somebody tell me what I am doing wrong here.
CREATE procedure dbo.wfiDocuments_Get
(
@ModuleIdint,
@PortalIdint,
@IsActivebit=NULL
)
AS
declare @SQL nvarchar(4000)
SET @SQL =
'select
DocumentId,
ModuleId,
PortalId,
CreatedByUserId,
''CreatedByUserName'' = Users.FirstName +'' '' + Users.LastName,
CreatedDate,
Title,
Category,
Syndicate,
Clicks,
Size,
Description,
FileName,
VPath,
IsActive
from wfiDocuments
left outer join Users on wfiDocuments.CreatedByUserId = Users.UserId
where PortalId=@Portal and ModuleId =@Module'
IF @IsActive IS NOT NULL
SET @SQL = @SQL + ' AND IsActive=@Active'
SET @SQL = @SQL + ' ORDER BY Title'
EXEC sp_executesql @SQL,
N'@Portal INT,@Module INT,@Active bit',
@PortalId,@ModuleId,@IsActive
GO
View 11 Replies
View Related
Oct 13, 2004
Hi there !
I have a table called customer which got
id = int
name = varchar
address = varchar
email= varchar
can you please write the syntax that insert the below data in the table using query Analyzer
id = 1
name = fadil
Address = London
email = fadil1977@hotmail.com
Thank you for your time and help.
View 1 Replies
View Related
May 5, 2006
ok the following statement returns the correct results in sql query analyzer but in the .net environment with c# it returns back less 3 records
SELECT SUM(ao.amount),bl.dpc,bl.city from billinglocation bl inner join shippinglocation sl on bl.billinglocationid = sl.billinglocationid inner join absorbentorder ao on sl.shippinglocationid = ao.shippinglocationid group by bl.dpc, bl.city
billinglocation 1 - 1 shippinglocation 1 - many absorbentorder
anybody have any ideas why this might be occuringthanks!
View 2 Replies
View Related
