Running A SSIS Package As A Job Error - With A Connection To An Oracle Database
Oct 10, 2007
Hi,
I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:
Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.
I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job. I've four posts regarding this error message on the MSDN forums that aren't helpful at this moment - I'm hoping that someone will have found a solution since those posts. Any suggestions are welcomed.
Thanks for your help!
Sue
View 14 Replies
ADVERTISEMENT
May 2, 2007
Hi,
I want to make a SSIS package with Oracle and deploy it in no of oracle databases, for it every time I have to open package and change connection information.
How can I make oracle connection information as variable value so that when I deploy my package on Oracle database it will pick all oracle connection information(User Id, Pwd, Server Name) automatically.
Please let me know about this.
Thanks
View 4 Replies
View Related
Aug 14, 2006
Hi There,
In SSIS package development environment, I was able to connect to an oracle database and pull data into my sql server database. I installed the client tools for oracle and I put an entry into the tnsnames.ora and I was able to connect.
But in production environment, if I deploy the package on sql server, I was wondering if I had to do the same job of downloading the oracle client tools onto my production machine --which creates a tnsnames.ora file to it default location and then edit it with tthe tns entry-- or is there a better way to do this--avoiding the download?
Can somebody plzz help me ?
Thanks.
View 10 Replies
View Related
Apr 9, 2008
Hi i get a error when i run my SSIS package. Here is the message
Error: 0xC02020A1 at import file, Flat File Source [1]: Data conversion failed. The data conversion for column "su_supplier_code" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
Error: 0xC020902A at import file, Flat File Source [1]: The "output column "su_supplier_code" (61)" failed because truncation occurred, and the truncation row disposition on "output column "su_supplier_code" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
The funny thing about this is when i run the job a 2nd time it works fine.
Has any one any idea about this error or why the job would work fine the 2nd ?
View 1 Replies
View Related
Jun 12, 2007
I am running into an error when running a package using a scheduled job under SQL Server Agent account. I am getting following error:
Date 6/12/2007 4:19:15 PM
Log Job History (VistaODSFeed)
Step ID 0
Server 006-DEVSQL2005
Job Name VistaODSFeed
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (ACIsnasir) of job VistaODSFeed has server access (reason: Could not obtain information about Windows NT group/user 'ACIsnasir', error code 0x6ba. [SQLSTATE 42000] (Error 15404)).
ACIsnasir is not the account under which SQL Server Agent service runs. However ACIsnasir has sa priveleges. not sure why am I getting ACIsnasir in the error and not the account under which sql server agent runs.
ideas?
View 1 Replies
View Related
Sep 16, 2007
I run an ssis task with right click in the BIDS.
the task transform data of the tables between sql2005 DB to another sql2005 DB.
this is the error I get:
Code Snippet
An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:
"Communication link failure".
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:
"TCP Provider: The semaphore timeout period has expired.
".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: CopyTables2
i have a similar task, only diffrent tables that being transfered, same settings. this task run succesfully.
for the task that fails it takes a long time to run (something like half an hour, maybe more) and then it falils. the task that succeeds finish fast (something like 5 minutes). the data in the tables that being transeferred in the good task is much smaller than the data in the tables in the failed task.
Anyone knows the reason to the error.
Thanks.
View 14 Replies
View Related
Sep 10, 2007
Hello,
I created a ssis package to transfer data between tables of sql2005 DB to another sql2005 database.
when i run it from BIDS with right click -- > execute package i get this error:
Code Snippet
Error: 0xC002F325 at CopyTables1, Transfer SQL Server Objects Task: Execution failed with the following error: "Cannot apply value null to property Login: Value cannot be null..".
anyone can help here.
Thanks.
View 4 Replies
View Related
Sep 12, 2007
Hello.
I run a ssis package of transferring data between sql2005 databases.
I get this error:
Code Snippet
Error: 0xC002F325 at CopyTables2, Transfer SQL Server Objects Task: Execution failed with the following error:
"ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description:
"Could not continue scan with NOLOCK due to data movement.".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: CopyTables2
i run the package currently with right click on the package on the BIDS.
what is the reason for this error? how can I check it?
Thanks.
View 6 Replies
View Related
Apr 27, 2007
Hi,
I used OLE DB for oracle connection provider, it takes only Server name, User id, Password but along with it,
I want to give it Database name like in OLE DB for Sql Server.
Is it possible to provide it in some other way, so that i can put DataBase name directly also.
Thanks
View 12 Replies
View Related
Jul 15, 2015
Our project is on SSIS 2012 and we are using the project deployment model. We have parameter the connection managers, created environments, environment variables and configured the references. Hence, when we deploy the solution to higher environments, the connection strings are picked from the environments and not the ones stored in the connection manager.
However, we face issues when in development environment, we need to run the same package but by entering the values manually in the connection manager. Even though the connection details are correct, when we execute the package from Visual Studio, SSIS is not able to connect to the database. Is there any way to have SSIS prompt for the connection details after we have click on "Execute Task" or "Start" from Visual Studio?Â
View 6 Replies
View Related
Feb 23, 2008
Hi All,
I would appreciate if someone can help me with the following:
I have package that I designed on 32 bit system. It was copied over to 64 bit server's directory (Production).
I am trying to execute that package using DtExec utility. My package has some parameters that I am trying to set on the command prompt using /SET option. Everything runs fine on 32 bit system (that is my dev box) but I get the following on 64 bit system (Production):
Command that I am trying to run is:
dtutil.exe /FILE "e:external_dataSSISXXX.dtsx"
/SET "Package.Variables[User::ASServer].Properties[Value]";"CP_Promotion"
I get the following errors:
Microsoft (R) SQL Server SSIS Package Utilities
Version 9.00.1399.06 for 64-bit
Copyright (C) Microsoft Corp 1984-2004. All rights reserved.
Option "/SET" is not valid.
On 64 bit system, I don't have 32 bit version of DTExec installed. According to Books On Line the syntax to use DTExec on both 32 bit and 64 bit system are the same. Can /SET not be used in 64 bit system.
Thanks in advance for your help.
View 7 Replies
View Related
Jan 30, 2007
Hello,
I'm having problems when I try to run a package from a job in SQL Server Agent. I have the same package in a server and it works fine,but when I try to install it in a different server I keep getting this error:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 01:19:10 p.m.
Progress: 2007-01-30 13:19:10.40
Source: Delete scripts Execute Process Task
Operation Complete: 0% complete
End Progress
Error: 2007-01-30 13:19:10.57
Code: 0xC0029151
Source: Delete scripts Execute Process Task
Description: In Executing "C:Project_SSISDelete_Items.bat" "" at "", The process exit code was "1" while the expected was "0".
End Error
Progress: 2007-01-30 13:19:10.57
Source: Delete scripts Execute Process Task
Operation Complete: 100% complete
End Progress
Warning: 2007-01-30 13:19:10.57
Code: 0x80019002
Source: Upload data
Description: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 01:19:10 p.m.
Finished: 01:19:10 p.m.
Elapsed: 0.5 seconds
I can run it from Integration services Server, from BI, and I tried modifying the ProtectionLevel property to DontSaveSensitive and ServerStorage. I have other packages that run in jobs, and they work fine...but i don´t know what else to do....By the way, I'm using an administrator user to run the package.
Please help! =(
View 4 Replies
View Related
Aug 7, 2007
Hi
I created SSIS Package to transfer tables from one sql2005 DB to another sql2005 DB.
When I execute the package from the BIDS it execute succesfully.
However, when I import the package (file system) to the management studio - msdb - stored packages and run the package from there (right click: Run Package) I get this error:
the validate method on the task failed, and returned error code. the validate method must succeed and indicate the result using an out parameter.
what is the reason for this error?
I aprriciate your help.
SeoAndSo.com
View 6 Replies
View Related
May 18, 2006
This package which is a child package has been running successfully for quite some time now. All of a sudden we are getting these intermittant error messages. Does anyone have any ideas what to do or check for?
thanks
===========================
Error portion
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
====================================================
Complete child package log
Executing ExecutePackageTask: D:ssissrwpackagesSRW_ORACLE_SALES_FTBL.dtsx
Information: 0x40016041 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from the XML file "D:SSISconfigurationCONFIG-STAGE1.dtsConfig".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SSIS_Configurations]";"System Configuration Settings";".
Information: 0x40016040 at SRW_ORACLE_SALES_FTBL: The package is attempting to configure from SQL Server using the configuration string ""MSSQL-CONFIG";"[dbo].[SRW_SSIS_Configurations]";"SRW Main Configurations";".
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x4004300A at CF-DFT Oracle Sales Fact, DTS.Pipeline: Validation phase is beginning.
Warning: 0x802092A7 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: Truncation may occur due to inserting data from data flow column "IC_ORDER" with a length of 240 to database column "IC_ORDER" with a length of 1.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "SERIAL_NUMBER" (2680) on output "Sort Output" (2453) and component "Sort 1" (2451) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "ORG_ID" (13377) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "CUST_TRX_TYPE_ID" (13428) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Data Conversion 1.Copy of CUST_TRX_TYPE_ID" (13443) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "GL_ID_REV" (13449) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Warning: 0x80047076 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The output column "Copy of GL_ID_REV" (13458) on output "Union All Output 1" (13361) and component "Union All" (13359) is not subsequently used in the Data Flow task. Removing this unused output column can increase Data Flow task performance.
Information: 0x40043006 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, REV GL SEGS [307]: component "REV GL SEGS" (307) has cached 780 rows.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get oper unit [813]: component "get oper unit" (813) has cached 12 rows.
Warning: 0x802090E4 at CF-DFT Oracle Sales Fact, get oper unit [813]: The Lookup transformation encountered duplicate reference key values when caching reference data. The Lookup transformation found duplicate key values when caching metadata in PreExecute. This error occurs in Full Cache mode only. Either remove the duplicate key values, or change the cache mode to PARTIAL or NO_CACHE.
Information: 0x400490F4 at CF-DFT Oracle Sales Fact, get header txn type for IC flag [13685]: component "get header txn type for IC flag" (13685) has cached 768 rows.
Information: 0x4004300C at CF-DFT Oracle Sales Fact, DTS.Pipeline: Execute phase is beginning.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100484768 bytes, but was unable to swap out any buffers to relieve memory pressure. 83 buffers were considered and 83 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100484768 bytes.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 31 percent memory load. There are 8587960320 bytes of physical memory with 5869387776 bytes free. There are 2147352576 bytes of virtual memory with 1223802880 bytes free. The paging file has 12673945600 bytes with 9901600768 bytes free.
Information: 0x4004800D at CF-DFT Oracle Sales Fact, DTS.Pipeline: The buffer manager failed a memory allocation call for 100483760 bytes, but was unable to swap out any buffers to relieve memory pressure. 162 buffers were considered and 162 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
Error: 0xC0047012 at CF-DFT Oracle Sales Fact, DTS.Pipeline: A buffer failed while allocating 100483760 bytes.
Error: 0xC02020C4 at CF-DFT Oracle Sales Fact, order line id [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
Error: 0xC0047011 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The system reports 30 percent memory load. There are 8587960320 bytes of physical memory with 5972680704 bytes free. There are 2147352576 bytes of virtual memory with 1324290048 bytes free. The paging file has 12673945600 bytes with 10005012480 bytes free.
Error: 0xC0047038 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The PrimeOutput method on component "order line id" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047056 at CF-DFT Oracle Sales Fact, DTS.Pipeline: The Data Flow task failed to create a buffer to call PrimeOutput for output "Union All" (13359) on component "Union All Output 1" (13361). This error usually occurs due to an out-of-memory condition.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "SourceThread1" has exited with error code 0xC0047038.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread2" has exited with error code 0x8007000E.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread3" has exited with error code 0xC0047039.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread1" has exited with error code 0xC0047039.
Error: 0xC0047039 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40043008 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has started.
Information: 0x402090E0 at CF-DFT Oracle Sales Fact, TEMP OUTPUT [998]: The final commit for the data insertion has ended.
Information: 0x40043009 at CF-DFT Oracle Sales Fact, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at CF-DFT Oracle Sales Fact, DTS.Pipeline: "component "TEMP OUTPUT" (998)" wrote 0 rows.
Task failed: CF-DFT Oracle Sales Fact
Warning: 0x80019002 at SRW_ORACLE_SALES_FTBL: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CF-EPGT SRW_ORACLE_SALES_FTBL
Warning: 0x80019002 at CF-SQC Facts: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at SRW_MAIN: The Execution method succeeded, but the number of errors raised (15) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SRW_Main.dtsx" finished: Failure.
View 9 Replies
View Related
Dec 17, 2007
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). It will only work when the Access database is not open. The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009
Source: NewPackage Connection manager "SourceConnectionOLEDB"
Description: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
What am I doing wrong?
View 5 Replies
View Related
Mar 5, 2007
Hi,
I have a table in SQL Server 2005 which has [Id] and [Name] as its columns.
I also have a Oracle database which has a similar table.
What I want to do is as follows:
In a SSIS package, I want to pick up details from SQL Server and update the Oracle table. And then should be done without using a linked server connection.
Can someone guide me as to how I can specify a update statement in the destination dataflow.
Thanks.
View 7 Replies
View Related
Mar 10, 2008
Hi,
I created a SSIS package which will generate an output file and place it on a remote fileshare location which will look something like this
\RemoteServerNameRemoteFilePath
The package is executing fine when I am executing it through BIDS or through execute package utility and writing the output file to remote file share location.
I created a SQL job for the package and ran the Job. Then, its throwing an error saying
Executed as user: DomainUser. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:33:06 AM Error: 2008-03-10 10:33:22.22 Code: 0xC020200E Source: DFT_Generate Output File Description: Cannot open the datafile "
\RemoteServerNameRemoteFilePathOutputFileName.txt". End Error Error: 2008-03-10 10:33:22.34 Code: 0xC004701A Source: DFT_Generate Output File DTS.Pipeline Description: component "FF_DST_Output" (160) failed the pre-execute phase and returned error code 0xC020200E. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:33:06 AM Finished: 10:33:22 AM Elapsed: 15.891 seconds. The package execution failed. The step failed.
DomainUser have all the permissions on the remote file share location.
SQL server agent is running with the log-on account DomainUser(same as the above).
Could anyone help me in resolving this issue.
Thanks & Regards,
Sriram.
View 8 Replies
View Related
Sep 4, 2006
Hi when i am using OLDB Command for Update Existing Records the Follwing ERror Code I am getting . Any one pls help me on this one.
1)[DTS.Pipeline] Error: The ProcessInput method on component "OLE DB Command 1" (9282)
failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method.
The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
2)
[OLE DB Command 1 [9282]] Error: An OLE DB error has occurred. Error code: 0x80040E10.
3)
[OLE DB Command 1 [9282]] Error: An OLE DB error has occurred. Error code: 0x80040E10.
View 1 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Aug 6, 2015
I am trying to dynamically create the connection to a database within an SSIS package.
the requirement is to allow the user to pass through the database as a variable and that variable will dynamically create the connection string in the connection manager.
Is this possible, if so how?
View 0 Replies
View Related
Apr 26, 2006
I am receiving an error on my master package that executes a number of other packages. The individual packages work fine when executed by themselves. However, I am getting the following error when I attempt to execute it from another package:
Error: Failed to acquire connection "conneciton". Connection may not be configured correctly or you may not have the right permissions on this connection.
Thanks in advance for your help.
View 1 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
Jun 30, 2006
I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.
When I execute this package It works fine. So far so good.
Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.
[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.
"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.
Please respond if anyone has any solution.
Thanks!
Anand
View 24 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
Oct 5, 2006
I have a SSIS package which needs to connect to 5 different servers to import data. I want to schedule one task to run this one .dtsx but run once for each server connection( 5 different servers).
Is it possible? how can i accomplish it? Is Package configuration possible? How to go about it if so?
thanks,
kushpaw
View 6 Replies
View Related
May 16, 2008
Hi to all!
When I want to execute my package as a job in a SQL Server 2005, I get this Message:
Executed as user: EDAsvcSQLServerPMS. ....00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 09:46:00 Error: 2008-05-16 09:46:01.41 Code: 0xC0048020 Source: Data Flow Task Data Flow Task (DTS.Pipeline) Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048020 Source: Data Flow Task DTS.Pipeline Description: The version of component "Excel Source" (1) is not compatible with this version of the DataFlow. End Error Error: 2008-05-16 09:46:01.54 Code: 0xC0048021 Source: Data Flow Task Excel Source [1] Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Excel Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://ww... The package execution fa... The step failed.
The package works fine on the developed server but when I try it out on our integration server it won't go through without these errors. The protection level is set on DontSaveSensitiv and allready I had an error less.
I hope someone can help me, because I can't find anything with google.
Thanx!
Regards,
swisskiwigirl
View 6 Replies
View Related
Aug 18, 2006
I'm trying to run a SSIS package (dtsx) from inside an sql job (SQL Server agent). This works fine if the user running (run as) the step is a local admin on the server. If it's not, I get the error message "The package could not be loaded. The step failed". This happens even if the user has all possible serverroles such as "sysadmin" etc in SQL.
So, my question is, is there any way to load an SSIS package without being local admin on the machine? In case it is, what is needed?
regards Andreas
View 3 Replies
View Related
Nov 8, 2006
I have an issue when a job is scheduled to run a SSIS package. The package (exporte a table to a text file) runs fine from microsoft visual studio but when i create a job and run it, i get the following error:
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'VOLCANOAdministrator', error code 0x534. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
View 5 Replies
View Related
Dec 8, 2005
My boss want to close access to xp_cmdshell for any logins including sa.
View 1 Replies
View Related
Feb 27, 2008
Can a SSIS Package be run as a job or a maintance tool. I need it to run nightly. Also in that same job can sql queries be added as well.
Thank you
Dee
View 27 Replies
View Related
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Jul 19, 2006
Hi All
I get a very strange error when running the JDBC in WAS6.0
This is running the Clarity 7.5.3 Application
Failed to verify database: Io exception:
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
Any ideas
View 3 Replies
View Related
