Running Multiple Jobs In A Sequence
Feb 18, 2004
I've got the stored procedure which first creates and then starts a job.
This stored procedure can be invoked from a number of triggers (after insert, after update)
The problem is:
when a sequence of statements is being executed one by one (like an insert immediately followed by several updates) and the stored procedure is invoked from the propper insert or update trigger once for each statement, the jobs are created in the right order (first for insert statement, then for updates in the order of the initial statements), but are executed in the wrong order.
Is there any explanation to this? And any solution?
The order of such jobs execution is vital for my application.
Thanx a lot in advance.
Please see the enclosed screenshot for an example list of jobs. Name of the job contains time of it's creation and another column shows the time the job was executed.
View 7 Replies
ADVERTISEMENT
May 24, 2000
Hi,
I'm using SQL SERVER 7.0. I'm wondering if it is possible to start a job with TSQL from within Query Analyzer?
Thanks,
Darrin Wilkinson
View 1 Replies
View Related
Jun 23, 2006
This is the first time, I am creating a job in SQL server 2000. I have to create few jobs, which can restore the databases at midnight, daily, on the server. We use lite speed backup sofware to take the backup and backup is stored at different location. We have a lite speed script, which we use to restore the backup.
In Job step I have wrote down the script and scheduled the job. But when I try to test the job It never runs. I do not know if something else I am supposed to do after creating a job, even I tried to run it manually it doesnot work.
Please help !!
View 2 Replies
View Related
Jun 10, 2005
I have a backup job which runs on sqll server 2000. About every two weekes the job doesn't complete. I t doesn't fail but just stays at executing until it's stopped. I t then won't run again until the server is rebooted. Anyone any ideas on what might course this. The database is approx 1.5 gig. It backs up between 5 and 8 hours. Normally there should be none or very little access to the database whilst it is backing up. The db is used for an intranet application.Any help much appreciated!Cheers
View 6 Replies
View Related
Oct 16, 2000
Jobs not running within SQL Server Agent on SQL7 despite being schedulled. The only explanation
I can think of for causing this is due to a date correction on the NT Server ( backwards ) by the NT Administrator.
I can run jobs manually, but the scheduled run times are being ignored.
I'm hoping that the jobs will start running again as schedulled when the system catches up to the date it was
previously at.
Has anyone had experiences of this and found a way to get things running again ?
View 3 Replies
View Related
Oct 1, 2002
I have a DTS package that exports data to a file, then run Win32 process pkzip to compress it to make it 4MB from 30MB so it can be emailed.
As this is to be run daily, I scheduled it, i.e. created a Job.
When running as a Job it fails in the pkzip section. The sqlservice account is not an NT system account for security reasons.
any ideas ?
TIA
Neil.
View 3 Replies
View Related
Dec 20, 2007
We have DTS Packages that are scheduled to run nightly and show up in EM under JOBS under SQL Server Agent. A password got changed and some of the nightly jobs blew up.
Went into the Packages and entered the new password and successfully executed the packages BUT when I go back to jobs under the SQL Server Agent, the jobs STILL will not run - they fail with a login failure - as if i never fixed the DTS package. HELP
View 3 Replies
View Related
Mar 30, 2008
hi every 1,
i am having a real tough time to figure this one out .
i need to find out what jobs are schedule in the server that sends data out to ever .
we are doing the migration from 2000 to 2005 and need to know which jobs send data to the another server .
i looked at the sysjobs_view , it tells the origination server and all the jobs that are running on it, but that's pretty much it.
on the sql agent , i see all the jobs but dint know which jobs are sending data out side the server .
some jobs are regular backup
maintenance jobs
how will I figure out which once are gong out .
hope you people can help . any help will be so much appreciated.
bobby
View 3 Replies
View Related
Apr 15, 2008
HI Guys.
i cannt' understand what's going on the server.. actually i have created a two jobs for full backup for my databases.. One is running perfect but one is giving me following error.
Can any one tells me where i m doing mistake.
Message
Executed as user: Domainuser. Cannot open backup device 'Database_Full(\192.0.0.1BackupsFULL_Backupsdatabase_Full.BAK)'. Operating system error 53(error not found). [SQLSTATE 42000] (Error 3201) BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
View 1 Replies
View Related
Dec 29, 2001
Hi,
I have SQLServer 6.5 SP5a update running on Windows NT 4.0 SP6
with 4 gig RAM and 4 processor.
Suddenly the SQL 6.5 jobs running on the production server started running very very slow. A job that suppose to run in 30 minutes are running like 2 hours and completing successfully.
(I suspect the after the Norton Anti virus automatic live update may be the reason but not the Second Vulnerability as mentioned by Microsoft Bulletin last week)
I check the SQLServer, ran the performance monitor, checked pagefiles, disk space, databases,memory, tempdb. Everything seems to be normal.
I rebooted the server, checked any other process making that slow. But no use.
Please help me out with this issue as this is a production and the CRM applications from the clients uses the database server.
Thanks in advance,
Anu
View 1 Replies
View Related
May 28, 2014
I'm trying to find out if there is a way within sql server or via script of emailing when a particular job or jobs has over run?
View 1 Replies
View Related
Jan 4, 2008
I’m trying to write a script that will detect long running agent jobs.
Having looked at this article:
http://www.databasejournal.com/features/mssql/article.php/3500276
It appears that agent job job id’s don’t necessarily get stored in the programname of the sysprocesses table. This is true if the agent executes an os command. It also appears that job steps do not get stored in the sysjobhistory until the step is complete so that cannot be used accurately.
Does anyone know of an effective way to find if there are long running jobs other than these methods?
View 1 Replies
View Related
Mar 7, 2007
Hi,
Is it possible to make jobs visible to people other than the job owner?
Can jobs run under non-sysadmin account?
Thanks,
Gulden
View 3 Replies
View Related
Jan 30, 2008
Hi,
I'm trying to configure mirroring with High Availability, Automatic Failover.
I know that all the jobs and maintenance plans need to be copied to the mirror server, and enabled if a mirror database takes over the principal role.
I wonder if it is a good solution to have all agent jobs on the Witness server (no jobs on principal and mirror). And all the jobs select the server where they should run (depending on current role).
One of the advantages of this approach would be that the jobs have to be created only once on the witness.
Will this solution work? What are the downsides of it?
Thanks,
Anna Sibirtseva.
View 5 Replies
View Related
Jan 4, 2008
I€™m trying to write a script that will detect long running agent jobs.
Having looked at this article:
http://www.databasejournal.com/features/mssql/article.php/3500276
It appears that agent job job id€™s don€™t necessarily get stored in the programname of the sysprocesses table. This is true if the agent executes an os command. It also appears that job steps do not get stored in the sysjobhistory until the step is complete so that cannot be used accurately.
Does anyone know of an effective way to find if there are long running jobs other than these methods?
View 17 Replies
View Related
May 17, 2004
I guys,
Does Anyone of the SQLServer Guru has a smart script to alert DBA by email for failed jobs or jobs running more then their normal time(long running jobs), so that I dont have to go and look at the jobs everyday manually...on different servers...
Help is greatly appericated...
Thanks
Jessie.
View 1 Replies
View Related
Nov 5, 2015
We have a scheduled restore job daily from production backup to non-production. The job usually runs in 2 hrs but today it ran more than 8 hrs.
How to get notification about this job like if it runs more than 3 hrs send email with % of restore completed
View 0 Replies
View Related
Jul 9, 2007
Hi. I was wondering if anyone has ever had a problem where nothing seems to be wrong with the server, and SQL Server Agent is up and running, but jobs fail. We had a job run at midnight, and it was the last successful run. Every job failed after that, with an error stating "Unable to retrieve steps for job..." There doesn't seem to be any reason for the problem. The jobs were kicked off manually and they all ran.
The only other error messages we could find were in the Application Event Viewer on the server. But the first error happened days ago and said this: "The description for Event ID ( 0 ) in Source ( .NET Runtime ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Unable to open shim database version registry key - v2.0.50727.00000."
Since then, every few seconds this error occurred: "Windows cannot load extensible counter DLL MSSQLServerOLAPService, the first DWORD in data section is the Windows error code."
We turned off the performance monitor counters and that error stopped. But we still have no idea if that was the cause of the problem.
This isn't the first time we've had an issue with jobs failing because the steps couldn't be 'found', while SQL Server Agent was up and running.
Has anyone else had this problem?
Thanks!
View 1 Replies
View Related
Sep 10, 2007
I would like to create an SSIS package in 2005 and run it in 2000. Is there anyway to do this? Or does SQL Server 2000 have a precursor to SSIS? I am trying to create a job to automatically catch and kill orphaned processes.
-Kyle
View 1 Replies
View Related
Oct 8, 2015
I try to find out how many jobs where run in parallel on my server in an interval of time. For example: between 1:00 AM and 2:00 AM there were MAX 66 jobs that run in parallel and MIN 4 jobs. I am not sure if I can find this info out from a system view or I need to play with sysjobhistory view.
View 10 Replies
View Related
Nov 11, 2015
Any sql script or powershell script which outputs late running jobs? Currently I am using the below script to find out currently running jobs along with duration. But my requirement is to add few more columns to the query which indicates whether jobs is running fine or running behind expected time.
-currently using query to pull running jobs
SELECT
   ja.job_id,
   j.name AS job_name,
   ja.start_execution_date,    Â
   ISNULL(last_executed_step_id,0)+1 AS currently_executing_step_id,
  Â
[code]...
View 4 Replies
View Related
Sep 24, 2015
I need a sql script for Jobs is running more-than 3 hours in a current server, based on a particular jobs.
View 2 Replies
View Related
Nov 24, 1999
Developers have complained that some of their jobs are taking too long to
run. I used Profiler to trace one really bad performer and could see that
the code was making one pass through its loop in about 7 seconds. I found
one select statement that was using the majority of the time, plugged it into
query analyzer and looked at the execution plan. It was using an index but
not very efficiently. I then ran it through index analysis and it
recommended a new index. This was cool! The new index helped.
But, the job continued to run very, very slowly - over a week before it died!
I ran another trace, and it was hanging for 10+ seconds in random locations.
Sometimes it would be on a database call, sometimes it would be on a simple
SET @variable = value statement. There was no pattern. According to the
sys admin, the server itself did not look taxed. It does not appear to be a
locking problem because of the random location of the stall. The application
and server are only lightly used at this point, so I would hate to see how
bad it could be if it was busy.
I am still fairly new to SQL, though I have years of DBA experience. I would
appreciate any ideas - especially the obvious things that I am probably not
considering. I have logged a call with Microsoft but they haven't gotten
back with an answer. I sent them a trace file and a perfmon file, neither
of which showed them anything.
Thanks!
View 2 Replies
View Related
May 29, 2013
When I give job Id in filter of this query this will give job status of "Success" but actually my job is currently in executing stage. I want to get all jobs that are currently in executing status.
Use msdb
go
select distinct j.Name as "Job Name", --j.job_id,
case j.enabled
when 1 then 'Enable'
when 0 then 'Disable'
[Code] ....
View 4 Replies
View Related
Oct 16, 2014
I have a requirement where in I have to concatenate the fields based on their sequence given in another table along with respect to their lengths.
eg..
Input 1:
Table A: (below are the fields and their respective values, not all fields will have values)
-----------
KSCHL - ZIC0 (KEY)
KOTABNR - 521 (KEY)
MATNR
KUNNR-->1234567890
LIFNR
VKORG-->a234
PRCTR
KUNRE-->4355325363
LIFRE-->88390234
PRODH
---------
Table BSadIt contains the same fields as in table A and will have sequence number in which the concatenation should happen. The length field(LEN) will have corresponding field lengths(pipe delimited) should be considered in concatenation)
---------
KSCHL - ZIC0 (KEY)
KOTABNR - 521 (KEY)
MATNR
KUNNR-->1
LIFNR
VKORG-->3
PRCTR
KUNRE-->2
LIFRE -->4
PRODH
LEN--> 10|10|4|10
Expected Result:
---------------------
KSCHL - ZIC0 (KEY)
KOTABNR - 521 (KEY)
MATNR
KUNNR1234567890
LIFNR
VKORGa234
PRCTR
KUNRE4355325363
LIFRE0088390234
PRODH
Concat_String12345678904355325363a2340088390234
Note: If the field length given in Table B doesn't match with actual size of the fields then, the field should be filled with 2 left spaces while concatenation.. Eg. In above example say LIFNR value = 88390234(len =icon_cool.gif
then after concat the value should be like below:
12345678904355325363a234 88390234
Note:The fields are not constant..I have around 40 fields like that in which any combination of fields can be possible...eg..
KSCHL - ZIC0 (KEY)
KOTABNR - 521 (KEY)
MATNR -->2
KUNNR--> 4
LIFNR
VKORG-->1
PRCTR
KUNRE
LIFRE --> 3
PRODH
I am not sure which field has the value 1, 2 etc.. and how many fields are forming the combination..It can be sometimes 3/40 fields or it can be 10/40 fields...I have to dynamically get those values and concat...
I can have any number of fields for concatenation..above example is just for 4...it should be dynamic enough to handle any number of fields..
View 2 Replies
View Related
Sep 21, 2015
I have a sequence container in my Package and this sequence has more than one control flow tasks.
Can I create the checkpoints such that only the failed component inside the sequence container runs again and not the other successful components/tasks in the sequence container?
View 3 Replies
View Related
Oct 16, 2014
I have a requirement where in I have to concatenate the fields based on their sequence given in another table along with respect to their lengths. eg..
Input 1:
Table A: (below are the fields and their respective values, not all fields will have values)
-----------
KSCHL - ZIC0 (KEY)
KOTABNR - 521 (KEY)
MATNR
KUNNR-->1234567890
LIFNR
VKORG-->a234
PRCTR
KUNRE-->4355325363
LIFRE-->88390234
PRODH
Table BIt contains the same fields as in table A and will have sequence number in which the concatenation should happen. The length field(LEN) will have corresponding field lengths(pipe delimited) should be considered in concatenation)
KSCHL - ZIC0 (KEY)
KOTABNR - 521 (KEY)
MATNR
KUNNR--> 1
LIFNR
VKORG-->3
PRCTR
KUNRE-->2
LIFRE -->4
PRODH
LEN10|10|4|10
Expected Result:
---------------------
KSCHL - ZIC0 (KEY)
KOTABNR - 521 (KEY)
MATNR
KUNNR1234567890
LIFNR
VKORGa234
PRCTR
KUNRE4355325363
LIFRE0088390234
PRODH
Concat_String12345678904355325363a2340088390234
Note: If the field length given in Table B doesn't match with actual size of the fields then, the field should be filled with 2 left spaces while concatenation.. Eg. In above example say LIFNR value = 88390234(len =icon_cool.gif then after concat the value should be like below:
12345678904355325363a234 88390234
Note:The fields are not constant..I have around 40 fields like that in which any combination of fields can be possible...eg..
KSCHL - ZIC0 (KEY)
KOTABNR - 521 (KEY)
MATNR -->2
KUNNR--> 4
LIFNR
VKORG-->1
PRCTR
KUNRE
LIFRE --> 3
PRODH
I am not sure which field has the value 1, 2 etc.. and how many fields are forming the combination..It can be sometimes 3/40 fields or it can be 10/40 fields...I have to dynamically get those values and concat...
I can have any number of fields for concatenation..above example is just for 4...it should be dynamic enough to handle any number of fields..
View 2 Replies
View Related
Sep 9, 2014
I have multiple sequence containers in my package. Â I only want to have one sendmail task for the failure/completion of the package. Â If I put the sendmail task in the last sequence container and the first seqence fails, the sendmail task will not be reached and therefore, no email will be sent out.Is there a way to have one sendmail task for all the sequence containers and allow it to send mail regardless of what sequence fails/completes?
View 4 Replies
View Related
Sep 22, 2005
I want to execute multiple SQL Server scheduled jobs using OSQL, but I only want to execute a job if the previous job completed. Is this possible? So far I am unable to prevent all jobs from starting before any have completed.
OSQL -Sservername -E -b -Q"usp_start_job 'JobNumber1'" -o usp_start_job.out
IF ERRORLEVEL 1 GOTO ERROR
OSQL -Sservername -E -b -Q"usp_start_job 'JobNumber2'" -o usp_start_job.out
IF ERRORLEVEL 1 GOTO ERROR
OSQL -Sservername -E -b -Q"usp_start_job 'JobNumber3'" -o usp_start_job.out
IF ERRORLEVEL 1 GOTO ERROR
GOTO EXIT
:ERROR
ECHO *** ERROR *** Check Log File
:EXIT
*** JOB COMPLETED ***
Dave
View 5 Replies
View Related
Jan 3, 2005
Hi all,
Is there any way so that we can run/ execute multiple jobs or local packeges at once. Can we create any sql script which will execute multiple jobs/packeges at once. please advise
View 3 Replies
View Related
Oct 14, 2014
I am following website link:
[URL]
I require to gather status details about all the SQL Agent jobs in the environment on multiple SQL Servers.
I tried to edit the script using:
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO")
$sqlServerName = 'localhostdeveloper'
 $sqlServer = New-Object Microsoft.SqlServer.Management.Smo.Server($sqlServerName)
 foreach($job in $sqlServer.JobServer.Jobs)
{
$job | select Name, OwnerLoginName, IsEnabled, LastRunDate, LastRunOutcome, DateCReated, DateLastModified
}
but SQL Agent jobs are not reflecting in the mail output...
View 11 Replies
View Related
Sep 9, 2005
I have many, many T-SQL scripts that create stored procedures and gives proper permissions. (uploading to production)I've been looking around for a way to run them all at once with a single script to pull them into the sql analyzer.Not copying and pasting them all, there are too many, but reading and executing.Anyone know a link with a sample to do this?Thanks,Zath
View 3 Replies
View Related