Hello,
I just read the thread on renaming the server, and running setup. My question is how do I rerun setup? SQL 7 was installed from the Back Office cd and when I try to run setup it tells me that my SQL Server is corrupted and I need to run setup. If I run Setup from the MSSQL7 directory, it wants to "upgrade" to standard edition. What am I missing here?
Thanks,
Robin
Hello,
I read few of the archive article about this, but I would like to verify this again.
We currently have Sqlesrver 6.5 running on Intel NT 4.0.
We would like to rename the server.
Is there any problem I'll need to look out for?
I am planning to rename the Nt server and reboot.
Thanks,
yi
i have a client with a windows 2003 server with 4 processors & 32 GB RAM, then MSSQL 2000 SP3. our software seems to run fine on it until the Task Manager shows the MSSQL using 1.7GB of RAM. At this point the whole system seems to slow down to a snails pace. Any ideas as to why 1.7GB and it never goes over that amount no matter how much activity i run on it. Restart mssql and everything seems to run good up until we see the 1.7GB again.
View 1 Replies View RelatedI've been trying to run through the Microsoft example at http://msdn2.microsoft.com/en-us/library/bb226707.aspx entitled "Configuring IIS for SQL Server 2005 CE Remote data access and Merge replication" but I'm having issues. The first time I ran through it I tried to use IIS on a server that was not the same as the SQL server and it didn't work at all. So I ran through it a second time and used the SQL servers IIS for testing and when I went to access the webpage I got a HTTP 500 Internal Error. After a while of playing I got a "Service Unavailable" message but still not the "Microsoft SQL Server CE server agent" screen I should have gotten. So my first question is how do I get this to work with a seperate IIS server? Which step do I change because I did put the right IIS and made a site there but it didn't work? I thought changing step 5 under the "To configure IIS for SQL Server CE Sync" to my IIs server would do it but it didn't. Maybe because in step 8 of the same section you have to use the share name and not a local directory even though its the same directory on the IIs server?
Also I just want to make sure I'm going down the right path with this. I have a VB.Net 05 application that connects to a database on a SQL 2005 server internally. I also have a seperate IIS server that is serving some web pages. Network is protected by both a hardware firewall then to a ISA box which I can control and allow http access to the internal IIS for whatever subdomain I end up choosing. I would like to create a mobile version of the application for some Mobile 6 devices we have and have them able to sync there data. In fact they don't even need to sync, just be able to download the server data once a week or on command. I've gotten the SDK for mobile devices, the "How to pull data using the RDA object", written the framework for the program, and now I need to figure out how to push the data out so it can be retrieved by my mobile devices over the internet. I've tried searching for answers, I thought this would be a popular thing to do, but I'm having trouble finding anything.
-Allan
Hi,
I have installed SQL 2005 and was trying to run one of the Samples. I installed SQL as an instance, but when I run the setup script, it fails because it can not assign permissions to the ASPNET account.
It looks like it thinks the account is ServerNameInstanceNameASPNET, but it should be ServerNameASPNET.
Thanks,
Michael Wassermann
Hi, i read article on how to install the AdventureWorks on my PC, basically i downloaded the sample db from microsoft website, but after i install several times, i seems cant get to see it in my sql server 2005, please assist on this, i have been craking head for this. Thanks :)
View 1 Replies View RelatedI 'm trying to install Sql Server 2005 Express Edition using c# 2.0 by starting a process and launching setup. I also want to informed about installation progress. For instance i want to inform end user if any installation error return or if setup has successfully completed etc. I think i need a callback... I have no problem about silent - unattended install but how can i informed about running installation progress ? and send these info to end user 's form ?
Regards.
Yusuf Incekara
I want to create a datasource but the credentials I want to use will be based on the user running the report rater than hard coded.
I have tried using Windows Integrated Security but all i can is cant log in as NTAnonymous User?
hi
how to rename sql server in 7.0 without reinstalling or renaming the computer name? Any help will be appriciated?
regards
ganesh
How do you rename a SQL server?
View 2 Replies View RelatedAfter I renamed the server. Jobs that exsisted before I renamed the server are still associated with the original server name. It has associated those jobs with the original server and assumes that the original server is the MSX server. I do not have multiple instances running on the server and do not want it that way. Is there a way to change the originating server? Or remove the MSX server?
HELP!
We need to rename our server.
Example
SERVER_A renamed to SERVER_B and
SERVER_B renamed to SERVER_A
It is easy enough to change the NT box name. Other than using sp_DropServer and sp_AddServer, is there any other changes (updates) we need to make to SQL server or any system tables???
TIA,
Chris
HelloI am wondering if this is able to be done and what implications there wouldbe with SQL Server.Server1 name: Production Currently running Windows NT and SQL 7instance name is ProductionServer2 name: Test Currently running Windows 2000 andSQL 2000, instance name is Test - default installationBring the Server1 offline and rename Server 2 with the name of Production.Do we have to change the instance name in SQL now on Server 2? If so can wedo this? I didn't think you could change a instance name and had toreinstall SQL.Another Question:Can you have 2 instances of SQL with the same name but reside on differentservers?ThanksSher
View 2 Replies View RelatedHi all,
I have a Windows 2003 server box running SQL 2000 and BizTalk 2006. I need to change the name of the underlying server, could anyone point me in the right direction of what I would need to change in terms of SQL and BizTalk config to make it all sit happily with this?
Kind regards
Taz
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1
MSSQL2012 is set to run on = 11.12.13.2
IN DNS:
A Record: Mike-PC = 11.12.13.1
A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
Do I have to re-install SQL2000 if I change the Win2000 Server name.
Thanks
I am experiencing a big problem with my prod server.I renamed my production server as my test sever (abc) and the test server to (xyz) in sql 2000.
Now, when I connect from my test server to my prod server, it does not seem to see the new server even I put the new server name. It still sees the databases what is in the test server, not the new server databases.
How can I resolve this?
Please help. Thank you all.
Greetings,
Just dotting my 'i's & crossing my 't's here - what potential ramifications
are there in the renaming (as in changing the NetBIOS name) of an SQL 6.5
server? From what I can gather, it is as simple as performing the rename,
and then doing some minor config changes afterwards (i.e. unregistering the
old server entry within SEM and re-registering the server under the new
name) The main SQL application that is installed can be configured easily
enough but I just want to make absolutely sure that there aren't any
NBName-specific entries embedded in the Registry, MASTER.dat, or anywhere
else that will cause me grief once the change is made.
I've browsed through TechNet & Books Online but haven't as yet found a nice
definitive Q-Article which describes the exact procedure & potential
ramifications.
TIA,
RM
This is a cross posting with:
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=33143
Is it possible to rename a database in SQL Server 2000? If
not, is it possible to copy the tables and relationship diagram
from one to another? The database is new, so there are no records
to copy. I just want to rename it, because redoing the tables would
take too much energy (<----Lazy). :)
Mike B
We need to move a cluster to a new data center. There is a strong preference to retain the previous SQL Virtual Name. The existing cluster has a single default instance. We understand that when you have created a SQL Server FCI that you can change the SQL Virtual Name but not the instance name. So if the current SQL Virtual Name is SQL1 then at a high level:
Build cluster at new DCInstall SQL Server FCI with a virtual name as SQLTEMP and as a the default instanceShutdown old cluster ???Rename SQLTEMP to SQL1 Since there is an existing SQL Virtual Name my concern is that we cannot simply rename SQLTEMP to SQL1. Do we need to delete the VCO from AD for SQL1 in step
I have a SQL Server 2008 R2 Cluster. I have moved a file to another drive by adding a new file on the drive, doing a shrinkfile with emptyfile. I have removed the old file and when I try to rename the new file to the old files old name, I get an error.
ALTER DATABASE mydb REMOVE FILE myfilename
Msg 5009, Level 16, State 9, Line 1
One or more files listed in the statement could not be found or could not be initialized.
ALTER DATABASE mydb
modify FILE ( NAME = temp_filename
, NEWNAME = myfilename
)
Msg 1828, Level 16, State 3, Line 4
The logical file name "myfilename" is already in use. Choose a different name.
I have completed a failover, thinking the name was being held in cache. I've also renamed to something completely different then tried to rename to the old filename.
Is there any danger with renaming the LOGICAL file names behind the database?
There are a bunch of databases that were restored copies and all of them have the same logical database file name. I'm trying to get some growth data so I want the logical files to be different (prefer them to match the actual database name) so I can more easily identify them.
For instance:
database_id name type_desc name physical_name
1 DLMdb1 ROWS DLMDB1 D:dlmdb1.mdf
1 DLMdb1 LOG DLMDB1_log E:dlmdb1.ldf
2 DLMdb2 ROWS DLMDB1 D:dlmdb2.mdf
2 DLMdb2 LOG DLMDB1_log E:dlmdb2.ldf
3 DLMdb3 ROWS DLMDB1 D:dlmdb3.mdf
3 DLMdb3 LOG DLMDB1_log E:dlmdb3.ldf
Am I safe to rename the logical names? I can't think of anything that references those logical file names that I would be breaking [backups, applications].
I installed sql server on one of my test servers, and I am eventually going to rename this server and put it into production. This server will replace one of my old servers with the same name. I was wondering if there was a way to rename the SQL Server instance after you rename your server without having to reinstall SQL Server. Thanks in advance for all the help.
View 2 Replies View RelatedI'm working on creating a new version of an existing table. I want to keep the old table around, only with a different name. In looking this up I found there's a system routine named sp_rename, which looks like it will work fine.However in thinking about this I realized that the foreign key constraints defined on the table (there's 3 of them) are likely to not be renamed, correct?
If I'm correct, then I suppose I could rename the table, then drop the 3 foreign key constraints, and create them new using different names for those foreign key constraints.
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
View 3 Replies View RelatedI'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
This forum is intended for users who are new to SQL Server, and have basic usage questions. If you have setup or installation issues or questions, you should check out the Setup forum.
Thanks
Is there a safe way to rename an NT Server with SQL 7.0 installed on it so that SQL Server still runs on it? I haven't run across a way, and I have some folks who want to do so to get all their server names standardized...
View 1 Replies View RelatedHello all:
I need to rename my 2000 Server running an instance of SQL 2000. My question is this, will I have to reinstall SQL after the rename or will it come back up detecting the new server name. I am in a domain as a stand alone server.
Thanks.
Hello Reporting Services 2005 users or Reporting Services Team,
I have done everything to get pass this error but no luck.
My setup is :- WIndows 2003 Standared Edition SP1
Sql Server :-
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Reporting Services starting SKU: Standard.
From the Reporting Services Configuration Manager:
I can see all other things configured except Encryption Keys(blue sign)
Initialization(Grey sign) and Execution Acct(Yellow sign)
My windows Service Identity is using :
NT AuthorityNetworkService
Builtin Acct :NetworkService
Web Service Identity :-
ASP.NET Service Acct :- NT AuthorityNetworkService
DataBase Setup :- Credentials Type :- Service Credentials
I have also done everything from here thanks to Göran
http://stevenharman.net/blog/archive/2007/03/21/Avoiding-the-401-Unauthorized-Error-when-Using-the-ReportViewer-in.aspx
and
http://support.microsoft.com/default.aspx?scid=kb;en-us;896861
and
http://forum.k2workflow.com/viewtopic.php?t=619&
If you guys any solution for this please let me know.
I was wondering could this be a scale-out deployment issue ?
I also get the error when setting up the DataBase Setup :
Although saving the database connection info succeeded the The report server cannot access internal info about this deployment to determine whetherthe current con fig is valid for this editionThis could be a scale-out deployment and that the feature is not supported by this editionTo continue use a diff report server database or remove the encription keys
My Error log file is below:-
w3wp!webserver!5!16/05/2007-14:52:46:: i INFO: Reporting Web Server started
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!5!16/05/2007-14:52:46:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Reporting Services starting SKU: Standard
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Evaluation copy: 0 days left
w3wp!resourceutilities!5!16/05/2007-14:52:46:: i INFO: Running on 1 physical processors, 2 logical processors
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!16/05/2007-14:52:46:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Call to GetPermissions:/
w3wp!library!5!05/16/2007-14:52:48:: i INFO: Catalog SQL Server Edition = Standard
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
w3wp!library!5!05/16/2007-14:52:49:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerServiceUnavailableException: The Report Server Windows service 'ReportServer' is not running. The service must be running to use Report Server.
I searched, but couldn't find anything to match what I am looking for...
Basically, is there any way to tell DTS to create a new table each time that the backup is run? I am scheduling the backup for 1 hour intervals for 5 days, but need the databases that are backed up to be unique, so i would end up wiht 120 of them total.
Is there any way to do this through DTS? Or am I hosed?
Thanks in advance
Is it possible to rename a DTS package ??
View 1 Replies View Related